I have an XDAiis
ROM version 1.31.00 0 0
1.31.139
1.06.00 06.00
Can I add new sounds or get the from another location on the phone?
Settings > sound and notifications > reminders
Add a new wav file to your \windows directory and it will show
up in the selection list. (or overwrite an existing sound
in your \windows directory)
EDIT: looks like overwriting \windows\alarm1.wav doesn't change the alarm1 sound for Reminders. Strange. Just copy any wav file (small!) to \windows and select "Sound&Notifications" > Reminders > the name of your wav file.
Dunno if
hklm\software\microsoft\calendar\reminders
"WAVFILE"="whatever directory\filename"
wil work?
Cheers
Hi all, just wondering if the following can be done with some reg hack:
1. Enable Cleartype fonts
2. The fonts in POutlook is too big, can we make it smaller ?
3. Changing location of storing attachment e.g. SD
Many thanks
Try these
1. create a key: HKLM\SYSTEM\GDI\Cleartype
3. HKCU\Software\Microsoft\MAPI\AttachPath "\Storage Card\Inbox\Attachments"
HKCU\Software\Microsoft\MAPI\PropertyPath "\Storage Card\Inbox"
Has anyone else noticed that the HV to RGU and RGU to HV convertors Suck.
None of them work properly and they throw load of errors up.
Below is an example of what i am getting:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
As everyone can see these are all wrong, when i try to process back from rgu to hv i get error messages, and the only way to get rid of the error messages is to do this:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
You have to manually site there pressing return all the way through BOTH registry rgu's
what is the problem with this. does anyone else get this?
I have been sat here for 3 hours trying to get all of the entries on separate lines.
there has to be a faster way of doing this?
are you seriously trying to tell my that JJ, Sleuth, Schaps etc etc all sit there for hours pressing return?
No i dont think so, so it is possible that someone can enlighted me as to what i am doing wrong
thanks
bennec83
Ive never experienced any errors with rgu to hv and voce versa conversions. I'm still using CORE's Kitchen!
Set 'Wordwrap' to 'off' when editing if using Notepad.
And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.
bernardryan said:
And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.
Click to expand...
Click to collapse
Right.
Never 'take for granted' every details.
make sure you have both .dll's present in the directory when you make the conversions (cereg400.dll & msvcr71.dll).
i had similar issues and found out I forgot to copy one of them althou everything "seemed" to work fine.
cheers,
dan
Somewhat related issue ... any help appreciated...
I'm trying to build a package for one of the apps I always use. I have been somewhat successful, but I see (when doing a WinDiff comparison on REG dumps before and after CAB installation), that there are several more Registry Entries created than can be gleaned from the CAB file. Several of these REG entries include a CLSID.
I used one of the online GUID generators to provide me with the GUIDs for the DSM and RGU files ... no problem.
But the CLSID entries already in my registry dumps obviously don't match this ID. So, do I:
1) make the CLSID entries in my RGU to match the ones in my REG dump?, or
2) make the CLSID entries in my RGU the same as the ones generated for my DSM and RGU files?, or
3) Change the GUID numbers on my DSM and RGU to match those of the REG dump?
Does it matter WHICH way I do it? Do my GUID numbers need to match the CLSID numbers at all?
Any help would be greatly appreciated.
Thanks a lot,
-pvs
Purpose:
This purpose of this VBScript is to process and organize data in RGU/REG files to remove duplicates, identify faulty entries, and move entries to ascending alphabetical order (the same way it is displayed in a registry editor).
Requirements:
Windows Scripting Host (included in most versions of windows)
rgucomp.exe and cereg400.dll located somewhere in your path (same folder as the script probably won't work if the script is run from another folder)
.reg and .rgu files are expected to be UTF-16LE with BOM
Usage:
Drag a .rgu, .reg, or .hv onto RGUber.vbs OR run "wscript.exe RGUber.vbs example.rgu"
Details:
When an rgu|reg file is specified, RGUber will:
1) create backup of input file
2) rename input file to boot.rgu
3) use rgucomp to convert it to *.hv
4) use rgucomp to convert new .hv to original rgu path\name
5) Reorder all keys in ascending alphabetical order and all values for each key in ascending alphabetical order with default value first
When an hv file is specified, RGUber will:
1) use rgucomp to convert it to *.rgu
2) Reorder all keys in ascending alphabetical order and all values for each key in ascending alphabetical order with default value first
Options
Open RGUber.vbs in your favorite text editor. All options are set at the beginning with (hopefully) meaningful descriptions.
Code:
'//Path to rgucomp (leave this as default if rgucomp.exe is located in your system path)
Const RGUCOMP = "rgucomp.exe"
'//Path to notepad, only needed if %OPENAFTER% is true
Const NOTEPAD = "notepad.exe"
'//The following options can be set to True/False or 0/1
'//Organize registry entries in ascending alphabetical order
Const REORDER = True
'//Open in %NOTEPAD% after conversion is done
Const OPENAFTER = False
'//Save any errors from rgu -> hv conversion
Const LOGERRORS = True
'//Save a backup copy of %INPUTRGU% as "%INPUTRGU%_Backup.rgu"
Const BACKUPRGU = True
Other info
If target file already exists, RGUber will ask if you want to overwrite.
Text files (the MS way) typically contain CRLF for next line. Output from rgucomp.exe contains many CRCRLF. RGUber removes the extra CR.
I have very few comments in the code. If requested, I will upload another copy with as many detailed comments as I can manage.
I tried to code this as efficiently as VBScript can possibly be. I kept getting errors when trying to run 'rgucomp.exe -b -nologo' so instead of running it directly, RGUber creates a bat file, executes it, then deletes it.
On my AMD Phenom 9600 with Vista64 and 3 SATA in Raid5, RGUber completes rgu->hv->rgu of 2084 lines in <3s
RGUber always saves output from rgu->hv conversion but deletes the file if there were no errors.
RGUber crashes on files with no reg entries (e.g. empty app.reg in an EXT package that does not add any registry entries)
Changelog:
v1.21a
Values are now sorted in alphabetical order for each key
v1.2
Replaced Organize function with one from RGUOrder
Lost ability to reorder values for each key (To be readded in next version)
v1.1
Fixed a bug with removing hashdata from output (RGUber would mix data from two keys under one)
Changed sorting algorith with a much faster one
v1.02
Added option to remove RegistryUpdate key from rgucomp output
Fixed a typo where RGUber was not removing the system attribute from input rgu files
v1.01
Fixed typo where RGUber was waiting for backup file instead of log file
Change 'Done' msgbox to one that shows beginning time and ending time
v1.0
Initial Release
RGUOrder v1.4
This script will only reorder the contents of an rgu without processing with RGUComp, thereby keeping comments and delete key entries. RGUComp/cereg400.dll are not needed to use this app.
Changelog:
v1.4
Fixed a bug where if the original rgu did not end with a new line then the last entry after being sorted would be lost.
Fixed two bugs where only the first 25 tabs and first 25 spaces would be removed before sorting (This did not affect data integrity or performance, but the checksum would be different each time you run the output back through RGUOrder until all the original tabs/spaces were removed)
Added code to prevent multiple entries of the same key from being reordered
Fixed other miscellaneous bugs/oddities introduced with v1.3
v1.3
Added code to add a delete key for each subkey of a deleted key so that when reordered, the key deletion isn't broken
v1.2
Fixed a bug where the last key processed was being concatenated to another with no CRLF producing an invalid rgu file
I'm not sure if this relates to your app but I have a small question:
If a dumped a rom (raw, not kitchen type) and removed several apps/programs but did not clean the registry (very tedious), will this help me clean it up (remove dead paths, etc)?
And if so, how will it know just by dragging the .hv file? I mean how will your app know if a registry entry does not have the app/program included in the rom anymore?
Please forgive me if my question does not relate to your app
There is no way for my app to know, it isnt that smart
It would take an extensive app/database to know which keys are related to which apps.
Thanks for this post
updated to v1.1
v1.02 had a bug in the code which removed hash data from output which made it mix data from the key before it with the key after it
If I ever get around to updating again, I will use hvedit instead of rgucomp
I get an error.
Script: D:\RGUber.vbs
Line: 136
Char: 2
Error: File not found
Code: 800A0035
Source: Microsoft VBScript runtime error
Any reason why?
I attach the file i want to sort alphabetically.
I have no idea
It worked for me with no problem (file attached)
Please tell me the location of RGUber.vbs and of 51329f91-0017-4364-bcff-e032c5d45b01.rgu
Great application bro!!
Only limitation is that I have to put reg400.dll and rgucomp in C:\windows
c_shekhar said:
Great application bro!!
Only limitation is that I have to put reg400.dll and rgucomp in C:\windows
Click to expand...
Click to collapse
yeah, I tried to get around that but I didn't find anything feasible with vbscript :-/
Actually, they don't have to go in C:\windows
I reinstall windows regularly so I keep as many apps portable as I can. I have a bin folder on another partition that I add to the system path variable after a new install for stuff like this.
selyb said:
yeah, I tried to get around that but I didn't find anything feasible with vbscript :-/
Actually, they don't have to go in C:\windows
I reinstall windows regularly so I keep as many apps portable as I can. I have a bin folder on another partition that I add to the system path variable after a new install for stuff like this.
Click to expand...
Click to collapse
can you elaborate this a bit more. Because I too would like a similar arranfements...
My C:\ partition has Vista64
My F:\ partition has all my documents, downloads, music, movies, etc and a folder F:\bin\
F:\bin contains >100 downloaded command line programs and vbs scripts that I have written including
RGUber.vbs
lame.exe
rgucomp.exe
cereg400.dll
FixVTS.exe
faad.exe
nuerecmod.exe
Tag.exe
find Advanced System Properties (I can't remember how, it's different for XP/Vista/7) go to the Advanced tab and hit the Environment Variables button
Under system variables, scroll down to 'Path', double click it. This defines your 'system path'. It contains a list of folders separated by semicolon ";". At the end, add a semicolon and the path to the folder you want to add (e.g. ;F:\bin) after that, hit ok. XP may need to reboot to reflect the change but I'm not sure. Vista and 7 are affected immediately.
With this setup, you can open a command prompt in any folder on your computer and type "RGUber.vbs xyz.rgu" and it would work as if all the files are in that folder.
Thanks a lot bro!!!
I am grateful...
I'd really like to use this, but unfortunately I get this error regardless of the app.reg I drag onto the script:
Script: C:\RGUber\RGUber.vbs
Line: 232
Char: 3
Error: The system cannot find the path specified.
Code: 80070003
Source: (null)
Thanks if you can advise.
Quetzecotyl said:
I'd really like to use this, but unfortunately I get this error regardless of the app.reg I drag onto the script:
Script: C:\RGUber\RGUber.vbs
Line: 232
Char: 3
Error: The system cannot find the path specified.
Code: 80070003
Source: (null)
Thanks if you can advise.
Click to expand...
Click to collapse
Hmmm... this line asks the system for what is in the %temp% variable and attempts to change the working directory to the result.
Open RGUber.vbs in notepad and go to line 232
Modify
Code:
WSH.CurrentDirectory = WSH.Environment("SYSTEM")("temp")
to
Code:
WSH.CurrentDirectory = "C:\RGUber\"
then try again
Works great after your fix, selyb. Thank you for this useful app and your many helpful contributions to the Kaiser forums.
Quetzecotyl said:
Works great after your fix, selyb. Thank you for this useful app and your many helpful contributions to the Kaiser forums.
Click to expand...
Click to collapse
Yeah, I may relocate from Kaiser forums to Rhodium. I have an AT&T Tilt 2 in the mail to me ATM
Grats on getting a Rhodium. Found a question after using it for a while. This is just one example of such behavior, but why does:
Code:
[HKEY_CURRENT_USER\Software\HTC\TaskManager\ExclusiveList\System]
"CMBandSwitching.exe"=dword:0
get turned into:
Code:
"CMBandSwitching.exe"=dword:0
How do I make it regard CURRENT_USER keys?
Quetzecotyl said:
Grats on getting a Rhodium. Found a question after using it for a while. This is just one example of such behavior, but why does:
Code:
[HKEY_CURRENT_USER\Software\HTC\TaskManager\ExclusiveList\System]
"CMBandSwitching.exe"=dword:0
get turned into:
Code:
"CMBandSwitching.exe"=dword:0
How do I make it regard CURRENT_USER keys?
Click to expand...
Click to collapse
I had this problem with an earlier version. If you are using v1.1 then please attach the original rgu/reg. I have tried and I can't seem to reproduce it since I fixed it already.
Please, replace rgucomp with hvedit . I really need your help because rgucomp doesn't work for me . Thanks in advance .
tomcug said:
Please, replace rgucomp with hvedit . I really need your help because rgucomp doesn't work for me . Thanks in advance .
Click to expand...
Click to collapse
why doesn't rgucomp work? I would be surprised to learn that hvedit will work when rgucomp won't.
Hello. This is my first post. I'll teach you how to add custom fonts to Microsoft office mobile.
No change in font is needed. You can use your fonts without even changing their names!!
What you need:
-You need to have access to system file ( FullFS access) via connecting to PC or CMD SSH.
- A registry editor ( Interop tools by @gus33000, custom pfd, or vcreg )
Click to expand...
Click to collapse
1. Copy your fonts to this folder:
Phone\Windows\Fonts
You can make a new folder in it if you want to have your custom fonts in a separate folder.
2. Navigate to here in your registry editor: HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts
3. Make a new key like this:
Name: myfont (TrueType)
You can use any name instead of [I[myfont[/I]
Don't forget to the (TrueType) including parentheses even if it's not a true type font
4. Key Value:
If you pasted your font in root of the fonts folder, write this:
myfont.ttf
If you pasted it in a folder, then write this:
myfolder\myfont.ttf
Important: Pay attention to extensions. Your font might be ttf, otf, etc. So change the .ttf where needed.
5. Done! No restart needed. ( Although you may need to close office apps and open them again.) Now open word, PowerPoint, or Excel to test your new fonts.
I hope you enjoy that!