I know this topic has been covered previously but the problem I am having seems unique
I have updated my univeral rom in the normal way but the device will not come out of bootloader.
I have removed the sd card and run the rom update again but to no avail the bootloader screen remains.
I have updated a few times using various rom updates ie o2 Exec/ Imate / Qtek and never had a problem before.
The only thing different about this installation is I put the rom unlocker (ref Buzz) and I can only think this is causing the problem.
Can anyone help
Hi jonboy,
just had the same problem few days ago and my heart dropped ;-)
Then I tried to install simply the phone-rom version 1.04.02 (I forgot from which package) - waited, rebooted and hurray
HTH for you as well
ndee
Related
I have a UK M5000 and updated the ROM to the new Orange ROM without problem. It was still slow so I plunged for the upgarde to the Dopod ROM. Since I did this it crashes all the time. Sometimes I can reset it sometimes I have to take the battery off. After a bit it won't even boot at all!
Despite all this I am always able to get to bootloader and reflash it. I have since tried the QTEK ROM and even back to the Orange ROM but now it still is unstable. Is there any known reason for this that I can try.
PS tried task format commands and mtty stuff as most of the time after a crash it sticks at the splash screen in all ROMs.
PPS IT NEVER did any of this before even after the first Orange ROM upgrade.
ANy help much appreciated.
Thanks
James
Not sure if you've cured this by now but I am a UK Orange user with SPV M5000 and went ahead with Dopod upgrade wihout any problems.
Presume you tried Hard Resetting, formatting card etc?
I have the same problem... It starts 2 days ago... Its terrible!
I have T-mobile. Now i flashing with original T-mobile ROM and i hope that everything will be ok.
If anybody knows whats happend???
I thought that the problem is on hardware...
30 minutes ago i flashed with latest I-mate ROM and when after flashing i do hard reset nothing happend. I see black screen and thats all!!!
Yes! With T-mobile ROM it seems to be ok. Now i try to flash with I-mate ROM again.
May be the problem is in the "MaUpgradeUt_noID.exe"?...
MaUpgradeUt_noID.exe
I find out that there are some issues with this file. Is this the same file we used to use during upgrade/change language??? If yes, than why when I tried to dawnload from the buzz web side i find that there said that the file is 365kb but when you dawnload the file is 165 and that is why some people are having problems when upgrade their rom or change operators/languages.
So if I want to change language it sais that you shoul run MaUpgradeUt_noID.exe and than I see in the picture of Magician. Is this NORMAL and should I go forward or WHAT.
Flashing with T-mobile original ROM didn't resolve the problem...
It's still bad...
What the hell is going on with my Universal???
Hi,
I recently tried to upgrade my MDA VArio from WM5 to WM6 but was having a few problems. I finally managed to install the official T Mobile upgrade from: http://www.tm-phonedownloads.com/download_manager_mda_vario.html
but this only brought the phone up to WM5 with the following radio versions:
IPL - 2.21
SPL - 2.21
OS - Can't remember this (I think it may have been 2.19)
Anyway, try as I may, I could get any of the following updates to work,
Crossbow Reloaded v1.5
TNT 4.0 Professional
XDA Mobile 6.0
TouchNoEvil_4Mb
XDA Mobile 6 r2a
XM6r3
Wizard Love
Each time I tried one of these upgrades, I would get a failure message at 99% of the conversion (various errors for each of the different ROM's)
ERROR [302~318] : UPDATE ERROR
ERROR [320~328] : INVALID COMMAND
ERROR [300] : INVALID UPDATE TOOL
Each time i would re-flash the phone to the official T-Mobile ROM. I finally tried to do the following, use
Real Radio 2.611
Which did actaully work, but then I went for the following
XM6r3
and I had a power failure on my pc half way through! My phone stopped respoding to any commands (had the progress bar on screen stuck at 50%) so i took th battery out and since then I get nothing - nada!
I thought that I had maybe completely drained the battery, but my MDA won't even charge up now, please help, i am desperate to get this working again - if possible
srscotland said:
Hi,
I recently tried to upgrade my MDA VArio from WM5 to WM6 but was having a few problems. I finally managed to install the official T Mobile upgrade from: http://www.tm-phonedownloads.com/download_manager_mda_vario.html
but this only brought the phone up to WM5 with the following radio versions:
IPL - 2.21
SPL - 2.21
OS - Can't remember this (I think it may have been 2.19)
Anyway, try as I may, I could get any of the following updates to work,
Crossbow Reloaded v1.5
TNT 4.0 Professional
XDA Mobile 6.0
TouchNoEvil_4Mb
XDA Mobile 6 r2a
XM6r3
Wizard Love
Each time I tried one of these upgrades, I would get a failure message at 99% of the conversion (various errors for each of the different ROM's)
ERROR [302~318] : UPDATE ERROR
ERROR [320~328] : INVALID COMMAND
ERROR [300] : INVALID UPDATE TOOL
Each time i would re-flash the phone to the official T-Mobile ROM. I finally tried to do the following, use
Real Radio 2.611
Which did actaully work, but then I went for the following
XM6r3
and I had a power failure on my pc half way through! My phone stopped respoding to any commands (had the progress bar on screen stuck at 50%) so i took th battery out and since then I get nothing - nada!
I thought that I had maybe completely drained the battery, but my MDA won't even charge up now, please help, i am desperate to get this working again - if possible
Click to expand...
Click to collapse
First,plz always read ,search in the forum for your problems.
secondly, always post in the correct forum and thread.
As I see from your post you have been going around the forum downloading and trying to upgrade to wm6 rom with different custom builds and were unsuccessful,why...? cuz you did not read and follow the right procedure for upgrading,the first and foremost requirement to upgrade to any wm6 upgrade is to have your device sim/cid unlocked,only after sim/cid unlock you are able to upgrade,otherwise you'll fail and might in the process "BRICK" your phone.
from your vital data of your MDA it's a G3 DOC chip ,so check out the following link and carry out the procedure to unlock and than upgrade,good luck
http://forum.xda-developers.com/showthread.php?t=285435
Hi Guys
I have read all the threads and support messages re: Error [246] Device not responding. And mine is different.
I first experienced this problem after I flashed Pays 1.45 Lite after previously installing Pays 1.45 Full. When i try to flash any ROM (not just Pays) I get an "Error [246] Device not responding" message.
Unlike other Error [246] Device not responding problems my bootloader tricolor screen does not come up on my Hermes. I have tried, reinstalling Active Synce, Hard and Soft Resetting, Restarting the bootloader SSPL and still no resolution of the problem.
Sorry bring this problem to bear but it is different to your typical "Error [246] Device not responding " problem and it is driving me batty. the ROM i currently have installed works (Pays 1.45 Lite) and my USB syncs with active sync fine.
Any ideas what the problems could be? I am tempted to drown the hermes in holy water atm to make sure it isn't demonic possession ;(
Any help would be appreciated ;p
Quick update:
I used Force using Safe SSPL for installing ROMS in the past with no problems. It is using this method that I get the 246 Error.
Other methods used gain different errors:
SPL1.04/1.10 - SPL1.09 Bootloader = Error 260 Update Error (check phone attached to usb cable and computer - which it is)
SPL1.11/1.13/1.20/1.35/1.40 Bootloader = 1% complete progress the error 270 Update Error (file image is corrupted) NO MATTER WHAT ROM I USE.
SPL2.02/2.10/2.30 New Bootloader = error 270 as above
Bootloader Screen Reads:
HERM100
IPL-1.01
HERM100
SPL-2.03
I have successfully flashed about 4-5 roms before without experiencing this problem. I have made no changes to my device or my PC. I don't know what could have caused this to happen all of a sudden and out of the blue.
Could a moderator please move this to Hermes Upgrading etc section please?
Have you tried installing the latest Olipro Hardspl v7.... it will read as v2.10 which is a later release than the v2.03 that you have... it will also fix any bad blocks on your device and you should be fine after that...
Debonairone
You. sir.... ROCK!
Works great. Tragedy averted. Thoughts about buying an iphone extingusihed.
;p
Hi gurus,
Im having the similar problem encountered the Error [246] Device not responding.
I have try installing the latest Olipro Hardspl v7 but unable to work. I am still encountered the same problem.
Im currently on Dopod 838 Pro (Hermes 100) with PAYS ROM, Rome Date : 08/09/07, Radio Version : 1.47.00.20, Protocol Version 32:80.7020.20H
Any advises and ideas ?
debonairone said:
Have you tried installing the latest Olipro Hardspl v7.... it will read as v2.10 which is a later release than the v2.03 that you have... it will also fix any bad blocks on your device and you should be fine after that...
Click to expand...
Click to collapse
can i use this olipro v7 for the herald/wing? i am unable to flash anything. i am hard spld and i have a working rom, i just dont like it. thanks
NO!!!! Using the Hard SPL for ANY Version of HTC device it wasn't intended is the fastest way to brick your phone...
ultramag69 said:
NO!!!! Using the Hard SPL for ANY Version of HTC device it wasn't intended is the fastest way to brick your phone...
Click to expand...
Click to collapse
cool, i didn't use it. but i can't flash anything. this stinks. i'm stuck with a rom i dont want.
dear friends
I am facing a strange problem on my diamond.
After flashing any ROM (whichever it may be) the loading of cabs etc takes place successfully.
But, after few minutes/hours the contents of strat/program are gone. and no program functions. I have flashed re-flashed and reflashed. cannot get over this strange proble.
Can any body guide me what wrong is happening with my diamond???
PS: I have hard SPL 1.40 olinex on my device.
Problem Solved -->http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22 (Thanks cmonex)
c_shekhar:
I have a similar problem. I have had no issues flashing in the past and am very familiar with the procedure. The other day however I noticed a problem where by some of my apps would "disappear".. odd. Also after some time my phone would hard reset instead of soft reset, at first I put this down the ROM as I have had this before with udk's ROMs (no disrespect intended!) and had tried his topaz ROM. It seems to have got to the point now that once a few hours have passed my phone will lock up and then when I reset, it just hangs at the "touch Diamond" screen and I have to hard reset.
I have tried reflashing Radio, Hard SPL, OS.. I have also tried installing my apps one by one and soft reseting after each install. just whenI think it is working it will freeze again.
I have tried flashing different HARD SPL's but it always completes but when I go into boot loader it still says OLINEX 1.40.
What was the last ROM you flashed before you started noticing the issue? The last two I tried where udk syrius topaz and DIB 1.33.
I wandered if it was something to do with the data on my internal storage???
Going to try a hard reset and format movinand next to see what that does.
P.S: yours was the last ROM I used for my Polaris, it was awesome!!
I tried uDK's topaz based latest ROM and after that it started givind problem.
many a times when I prick for soft reset it hard resets the device. I have hard resetted my device several times but it does not set the problem right.Huhhh
Thanks for liking my Polaris ROM..
any headway found by you pl share.....I had borrowed somebody's Diamond and it is F*##ed up.
Same problem here
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
I new I wouldn't be the only one!!
I have just hard reset and formatted movinand AND re-downloaded all my apps so for now nothing will be going back on my internal storage that was on before.
I'll post any updates.
I have the same problem with the Morna. Flashed, reflashed, soft & hard reset.. nothing solved. Every about 24hour the TF3D won't start, the SMS&Emails folders are empty, no contacts and on desktop an error on file BOOT.MSC (can't find associated program to open that)...
After 3 days, I have flashed the Touch with the TIR11 and no one problem. I don't know if the problem is of the rom or else...
Sounds like a virus...
never encounter this problem,but some of my friends does.neither do I know why
offtopic: Are you working on a Diamond rom? I really loved (in fact I'm still using it) your 1.60.21014bCS on my polaris... I think it will be permanent... Have you thinked of making a M2D rom for Diamond ?
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
garymeg said:
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
Click to expand...
Click to collapse
Thanks for the info, i'll give that a go. Makes sense. Will have to wait till tomorrow so i'll have to put up with a crippled phone till then!!
I posted about this issue a couple of days ago,I had all the symptoms described.
After using the clear storage option on my diamond,clearing the phone and internal storage then flashing a new rom,the problem seems to be resolved.
I also experienced similar issues yesterday and for the first time ever, during the use of a udK rom.
Update
Grumps said:
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
Click to expand...
Click to collapse
Update : ITs 17 hours later and still going fine. So maybe the reflashing of the stock rom resolved it. I must say the stock rom i flashed is huge. its over 110Mb so maybe it cleaned out all the jazz. Or maybe when i reformatted the NAND it resolved the problem. I dont know. I also did a softreset about 50 times during the night removing the battery every now and then and its still ok. Ill Update again as soon as something Happens
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Im Going to
sakara said:
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Click to expand...
Click to collapse
Ill try another rom tonite probably morn 1.8 or wm 6.5 beta 3. and see what happens
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
goRt said:
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
Click to expand...
Click to collapse
Simply running clear Storage didnot solve my pro...
superpc said:
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
Click to expand...
Click to collapse
Can you kindly write more details?
Is HK 2.03 stock ROM?
Which hardSPL did you have on your device before flashing the HK 2.03?
etc...
Stability Restored
Got mine stable again by following post #10.
Flashed stock 1.93 rom then flashed stock 1.93 spl.
Now back with oli 1.93 hspl and pda corners v3 rom.
Hi All,
I think I owe all of you this post.
I have been stuck with the Windows Mobile Screen(NO GSM) for over 2 hours today. I was trying to restore my dopod 838 pro to WM5 (WWE shipped) coz i was having so may issues with the WM6.5 versions. Here's what I did:
1. Tried to run the official installer found in the HTC Site. Didn't work so...
2. Took the .nbh file and used RRUWrapper.exe to load it into the device.
It worked but got NO GSM everytime I tried to boot.
I scoured the threads for solution and this was the recap of the things I did...
1. Entered Bootloader, reran RRUWrapper.exe to reload the WM5 rom.. Didn't work
2. Entered Bootloader, reran RRUWrapper.exe to reload DarkVisions v5 rom. That was what i used before the issue. Didn't work.
3. Removed battery for 20 minuites. Restarted phone after 20 mins. Still the same issue (stuck on bootscreen - no gsm)
4. Entered Bootloader, reran RRUWrapper.exe to load the official WM6 WWE (for tytn) rom. This seem to resolve it.
I always flash the rom without sim and microsd. I have inserted the sim and card, rebooted 2x... everythings normal...
I think it goes without question that i'll be sticking to this rom... At least its the official rom...
Thanks to all your posts from before. They all helped...
it didn't work for me.. any further suggestion?