Related
Dear friends,
I need help to upgrade my Medion which has built in Windows CE to Windows Mobile 2003, is that possible?
How? Where to get the software?
I will remain to hear from u all.
Thanx
the king said:
Dear friends,
I need help to upgrade my Medion which has built in Windows CE to Windows Mobile 2003, is that possible?
How? Where to get the software?
I will remain to hear from u all.
Thanx
Click to expand...
Click to collapse
Hi there,
It is along time I wrote this but no one has answered.
Is that means there is no answer or what?
With my deep thanx
It's unlikely without an original ROM update by the manufacturer.
However, what model etc is it? Do you have a webpage we can look at to get info about it.
V
It is like this one
Hi there,
In this website u can c what my Medion it look like.
https://www.medionshop.co.uk/?areaI...000000A00004A410A4F713EAE6B87E10000000A00004B
It runs Windows CE net 4.2 .
With my deep thanx
The King - the website you point to indicates it's running
"Microsoft Windows Mobile(TM) 2003".
Are you sure it's running .net? Could you post a screenshot?
As I said before, it's unlikely to be upgradeable without a full rom update from Medion - my father has a medion GPS PDA, and that's running WM2003. Maybe you could grab a rom from another wm2003 Medion and try patching it together, but unlikely!
V
SORRY this is the one !!!!!!!!!!!!
Hi there,
I am so sory, this is the one which I have:
https://www.medionshop.co.uk/?areaI...000000A00004A410A4F713EAE6B87E10000000A00004B
Please if u have any idea or inforamtion how to upgrade it so let me know it.
With my deep thanx,
the king
the king: I might be missing something, but that points to the same device I think. Still says WM2003.
V
Dear friend,
Try this link, PLZ.
https://www.medionshop.co.uk/?areaI...000000A00004A410A4F713EAE6B87E10000000A00004B
try to get down untill u c this: Product No. 30003183
that is my Pocket PC.
Full GPS Navigation System
Satellite Based Positioning (GPS)
Integrated GPS receiver
SD/MMC card reader
Windows® CE 4.2 (based)
With my deep thanx
all the links show that it's already running 2003
windows CE is just the core OS that WM2003 and 2005 and ... is build on
Windows CE 4.2
What I am talking about has these specifications:
Full GPS Navigation System
Satellite Based Positioning (GPS)
Integrated GPS receiver
SD/MMC card reader
Windows® CE 4.2 (based)
With my deep thanx
:lol:
ftp://ftp.xda-developers.com/BLueAngel/XDAIIshangman
I put this on the BA upload FTP today, MDA could you have a look at it?
Here is what came in the description
Instructions for upgrading your ROM
to WM 5 Build 14343
At this point, there is 1 BlueAngel WM5 English Roms available: Version
5.1.1700 Build 14343
This is a BA GSM rom and will only work on PH20B / PH20B1 devices.
And it cant be made, fixed, edited or reworked to work on any other device
You need Windows XP and SP2 to make ActiveSync 4 work! SP2 is available free
of charge at any PC World computer superstore or direct from Microsoft.com
Flashing your device can turn it into a Paper Weight, this is your own risk
Flashing a Rom which is not from your carrier will void the warranty
The Partion Tool resets your Exteneded rom Password and you Will not be able to
lock you EXT Rom if you revert back to CE2003
I have not tried it out yet. The way I put it in there is in sort of a package form, the file rarsave has the original rar files in it and the folders are the unpacked versions.
Any comments or results would be grately apreciated.
Ok, I upgraded to this ROM, from what I can tell it is the most straight up almost factory version of WM5 I have seen, It is fast and solid.
The only thing missing is the Blackberry software, Enterprise or web. If anyone knows where to get that I would be a happy camper. Can you get this software in a CAB form?
When you click on IE for the first time it even says OEM version!!!
No branding at all.
are you sure this isn't the one which we have tried before?
Where did you get this rom ?
I think it is the first WM5 rom for BA, PDA2k_2k5.rar but I will see after reflash
There is no point to upgade to this rom i am right and this is the first one the same as this one
There are far better roms in the ftp than this one
xplode said:
Where did you get this rom ?
I think it is the first WM5 rom for BA PDA2k_2k5.rar but I will se after reflash
Click to expand...
Click to collapse
i would be waiting for your reply after the reflash .. how long more to go??
I'm currently only backing up my device.
Hang|man said:
...
When you click on IE for the first time it even says OEM version!!!
No branding at all.
Click to expand...
Click to collapse
There is no branding in every WM5 rom fo BA, because it is not distributed by an operator
xplode said:
Hang|man said:
...
When you click on IE for the first time it even says OEM version!!!
No branding at all.
Click to expand...
Click to collapse
There is no branding in every WM5 rom fo BA, because it is not distributed by an operator
Click to expand...
Click to collapse
even for my 2003SE, it doesn't have any branding because I bypass auto config ... so don't think it is such a big discovery.
Yep sorry must me the same one, I am still looking for the WM5 Blackberry connect instant mail that will work with this version...
have a look at the text in post nr 1 and the wiki text
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
I am interested in trying out these new WM6 roms. however, I was wondering if anyone knew if easysync pro will work with WM6.
Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.
bunique said:
Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.
Click to expand...
Click to collapse
Please - What version are you using?
What version of EasySynch Pro works with Windows Mobile 6?
I'm also interested in using EasySynch Pro to synch my WM6 Device? Bunique, what version of EasySynch Pro are you using?
mine is 4.2.5
Easysync pro works with wm6 since V4.2.2. U have to install to main memory.
trlopes1974 said:
Easysync pro works with wm6 since V4.2.2. U have to install to main memory.
Click to expand...
Click to collapse
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
zzoinks said:
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!
ps. 4.2.5 is a fixpack
trlopes1974 said:
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!
Click to expand...
Click to collapse
Thanks for your reply. I found an IBM article outlining 4.2.5 and support for WM6.
Perhaps it was a problem with allowing unsigned apps? I seem to recall a registry hack/cab available to fix that. enable_rapi?
It's a bit of a moot point now since I reverted back to a WM5 rom last night. Maybe I'll try reflashing a WM6 rom and see if i can get it going though a hack...unless of course you'd be willing to send me a copy of 4.2.5, for evaluation purposes.
Thanks!
-Brett.
sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.
trlopes1974 said:
sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.
Click to expand...
Click to collapse
First off, thanks for the reply. I hope this isn't in the wrong forum... I found this thread through a search and I was hoping it applied to me. I've got a Wizard (Cingular-branded 8125), but I am using WM6 & Easysync Pro.
I still can't get EasySync 4.2.4 to install. I get a series of errors when it's trying to install the cab:
First, "this program uses a file that is no longer supported please obtain an updated version of the program"
Then "unable to launch \windows\xcpcsyncsvr.exe: error 1411"
Finally, it says that it's installed, but it isn't. And Easysync on the PC reports that it can't connect.
Any ideas?
Thanks,
-Brett.
zzoinks said:
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
I'm a IBMer too.
The title says it all, I upgraded to wm6 with the help of you guys, Now I would like to have Tom Tom Back on my Device, What is the Easiest way? Thanks for all replies
just install it from the cd... works fine with me.
Man, I wish I had the CD with me here at work, Owell I will get it when I get home, Thanks
good luck!
I've got this tom tom version:
6.0.30 Build 8320
Maybe you can look here : http://ppcwarez.org/phpBB2/viewtopic.php?t=1636 or here : http://ppcwarez.org/phpBB2/viewforum.php?f=38&topicdays=0&start=0
You have to register first.
Well, I got home this morning and liiked through the box and no TOMTOM program on the disk, so I am assuming its on the the EXT Rom, correct? So, What is the easiest way of getting it out, or back on my device? Thanks again
[email protected] said:
Well, I got home this morning and liiked through the box and no TOMTOM program on the disk, so I am assuming its on the the EXT Rom, correct? So, What is the easiest way of getting it out, or back on my device? Thanks again
Click to expand...
Click to collapse
Download it from my server:
http://pvdh.servemp3.com/download/TT6SDcard.rar
Hope you can use tom tom again.
Regards
Pvdhelm
ollie_1982 said:
just install it from the cd... works fine with me.
Click to expand...
Click to collapse
LOL... the official DVD only contains the maps and the TomTom Home application, but not the TomTom application itself. Normally that is included either in the extRom or on a flashcard, depending on what brand Artemis you have. I have the Dutch MDA Compact III and mine came on the microsd card.
pvdhelm said:
Download it from my server:
http://pvdh.servemp3.com/download/TT6SDcard.rar
Hope you can use tom tom again.
Regards
Pvdhelm
Click to expand...
Click to collapse
I really appreciate that, you have done me a great service, THANKS again
Tomtom with wm6
Hi, can someone post the tomtom application - TT6SDcard.rar - again or let me know where I can get a copy to reinstall on my HTC p3300?
I've recently upgradedto wm6 and lost the tomtom application.
waxy said:
Hi, can someone post the tomtom application - TT6SDcard.rar - again or let me know where I can get a copy to reinstall on my HTC p3300? I've recently upgradedto wm6 and lost the tomtom application.
Click to expand...
Click to collapse
You can download it directly from TomTom themselves:
http://www.tomtom.com/support/index.php?FID=6736&Lid=1
Same problem for me. Upgraded easely, but lost TomTom. Can anyone provide a link to download the app. As a result, my license is gone too.
techo91,
your license is in the folder where the map is.
techo91 said:
Same problem for me. Upgraded easely, but lost TomTom. Can anyone provide a link to download the app. As a result, my license is gone too.
Click to expand...
Click to collapse
techo91, the download link is just one post prior to yours ?!?
Hello everybody!
I recently found this old Qtek 9090 with Windows Mobile 2003, and I'd like to upgrade the OS to Windows Mobile 6 (in Italian) and then use it as a navigator...
I've already searched in this forum, but most of the links and downloads don't run, I suppose because this is an old matter...
I need also information about how to upgrade the rom... and I've read that I need also a "preparation pack" for WM2003 to use before upgrading, but I can't find a working link to the download.
Until now I found and downloaded this... "RC5 23698 Multi-Rom" by d-two... it is a .nbf file... but I actually don't know what to do with this file.
I apologize of having posted a new thread, I've already read a lot of posts in this forum, but the more I read, the more I get confused :S
I hope someone can help me, thanks a lot!
lukarons said:
Hello everybody!
I recently found this old Qtek 9090 with Windows Mobile 2003, and I'd like to upgrade the OS to Windows Mobile 6 (in Italian) and then use it as a navigator...
I've already searched in this forum, but most of the links and downloads don't run, I suppose because this is an old matter...
I need also information about how to upgrade the rom... and I've read that I need also a "preparation pack" for WM2003 to use before upgrading, but I can't find a working link to the download.
Until now I found and downloaded this... "RC5 23698 Multi-Rom" by d-two... it is a .nbf file... but I actually don't know what to do with this file.
I apologize of having posted a new thread, I've already read a lot of posts in this forum, but the more I read, the more I get confused :S
I hope someone can help me, thanks a lot!
Click to expand...
Click to collapse
Look in the thread and download the updater...
Use you win 7 64bit?
d-two said:
Look in the thread and download the updater...
Use you win 7 64bit?
Click to expand...
Click to collapse
Thank you for the help...
Yes, I'm using win 7 64 bit on my notebook, but if this is a problem I can use my old desktop with win XP sp2 32 bit! I've already downloaded your rom and also the updater!
lukarons said:
Thank you for the help...
Yes, I'm using win 7 64 bit on my notebook, but if this is a problem I can use my old desktop with win XP sp2 32 bit! I've already downloaded your rom and also the updater!
Click to expand...
Click to collapse
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
d-two said:
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
Click to expand...
Click to collapse
So, I just have to connect the device and run the updater, right?
lukarons said:
So, I just have to connect the device and run the updater, right?
Click to expand...
Click to collapse
Yes, sounds easy, right
d-two said:
Yes, sounds easy, right
Click to expand...
Click to collapse
the updater crashes while "Checking the information on your device... Please wait..."
What's wrong?
ok, sorry, I just forgot to put the .nbf file into the updater folder...
ok, upgrade successful! But now my pc doesn't recognize the device when I connect it... and I need to enter the device memory! What can I do?
lukarons said:
the updater crashes while "Checking the information on your device... Please wait..."
What's wrong?
ok, sorry, I just forgot to put the .nbf file into the updater folder...
ok, upgrade successful! But now my pc doesn't recognize the device when I connect it... and I need to enter the device memory! What can I do?
Click to expand...
Click to collapse
Go to ->Settings->connection->USB and test different settings!
d-two said:
Go to ->Settings->connection->USB and test different settings!
Click to expand...
Click to collapse
It doesn't work... Windows recognizes a device called "Blue Angel" but can't find its drivers and the Windows Mobile utility of win7 doesn't recognize it...
The Update failed and now. the BlueAngel is in Bootloader mode.
Any ideas what I could do now?
great sreye
sabrinah said:
The Update failed and now. the BlueAngel is in Bootloader mode.
Any ideas what I could do now?
Click to expand...
Click to collapse
hi did you get it sorted
same here my device is stuck now as well on the m#bootloader .cant do any thing at all after that or cant even get it out of the bootloaader. third today searching the forum any one who can help me out on that
---------- Post added at 02:34 AM ---------- Previous post was at 02:13 AM ----------
d-two said:
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
Click to expand...
Click to collapse
hi i got wm 2003 ba . i connected it straight and now m stuck in bootloader any help please .searching every where for it . and i got win 8 64 bit but this happened on win 7 32 bit .
read and try to understand D-Two's how to- it is all written there.
Common posting rule: first search, then read, then search again, read again, and if still nothing found: post
... and for sure you'll get helped.
thanks
?
What for?
btw: i forgot to write it's crucial to tell exactly what you've done before you ran into problems...
Few of us have second sight