Develop Bugs

JasJar ROM update - Another brick hits the wall

I have downloaded the new Shipping ROM update from ClubImate.com (uni_cdl-me_11238_132_10301_ship.exe) and tried installing it onto my JasJar with a horrible result: it's now only good to use as a paper weight Initially everything looked fine; the ROM utility detected the device and correctly displayed the existing versions of CE image, Device Extended image and Device Radio image, along with the versions it was going to upgrade to. It reset the JasJar (what I'd think was erasing the current versions), but has since been unable to install the upgraded versions. Result: a (virtually) dead JasJar :evil:
I have done the following in order to try and get it up and running again:
1) Several soft and hard resets - the best effort is a screen (with no back light) saying 'Serial' at the top and 'v0.60' at the bottom.
2) Uninstalled ActiveSync and tried reinstalling both version 4.10 and 4.1
3) I have tried to complete the upgrade procedure on two different PCs; one running WinXP SP2 and Win2K SP4.
Despite these efforts, the ROM installation utility is unable to detect the device (ActiveSync's device detection has been dodgy from the word get-go, despite WinXP detecting it every single time - although saying it's unable to identify it) resulting in the following error message from the ROM Update Utility:
In the Dialog's title bar: "R:3030 D:21200 U:11000 P:857873 - CB1" and the message "Error 101: Connection Error".
Please, please, please (with sugar ontop); can anyone of all you clever people out there offer some help or hope?
Thank you very much :!:

sure you did hardresets?
You´re really stuck in bootloader? strange... if it happens to me, i just do the standard hardreset: keep the 2 softbuttons pressed, resest with the stylus, and the confirm with 0 (zero). did you do that?

Yup - really stuck
Yes, I'm afraid the normal hard reset (Soft keys+Stylus reset) followed by entering '0' to confirm the reset, only brings me back to the boot loader...

same here

Help?
I had the same problem once with my himalaya and it was due to a firewall and virusscanner.
I turned them off- Look in your taskmanager that there isn't still running a service in the background. then I reinstalled the update and tried i new hard reset.
This worked for me I hope it will help you too
Good luck

1. pres ctl alt sup
2. kill wcesMgr.exe and wcscomm.exe
3. Connect your jasjas
4. Now your bootloader must show USB in the screen
5. Run the upgrade.
It should works...
Good luck

here it is
http://forum.xda-developers.com/viewtopic.php?p=161210#161210

Dear oddball,
Did you find solution to your problem?
I have the same problem!
dherrero's solution did not work for me.
Hope to hear another solution.
Thanks

Sorted...
First of all, thanks a lot to everyone who tried to lend a helping hand (what an absolutely brilliant forum this is!!! ).
However, neither of the solutions suggested worked for me, as I after lots more trial and error, worked out that the problem had to be hardware related. And I'm pleased to say that fault wasn't in the JasJar; in fact it was down to an un-original sync cable :idea: ! I managed to lose the one that came with the device (along with the CD and everything else that was in the box ) and after consulting Club imate support, was (obviously wrongly) told that any standard min-USB cable would do the trick. Ordered a new cable from where I bought the JasJar, and hey presto, problem solved. ROM upgrade worked without a hitch on first attempt - I didn't even have to disable my anti-virus or fire-wall software.
It might not be the solution for everyone else who seems to be struggling, but it worked for me, so if you've run out of options, it's worth a go.
Again, thanks a lot - and good luck to those still seeking a solution.

I have the sam problem
CRAP cant work it out

Hi,
Had the same problem..
- flashing ROM said 100% successful, but after power+reset still got "serial v1.00"
- tried different ROMs, no luck
- tried power and hard reset, no luck
- then tried JasJar ROM again, no luck
- but then I tried the radio ROM flash and the power-reset brought it to life.
So I recommend trying
a) just the radio update first, if no luck
b) jasjar THEN radio
See how you go.
Michael

my mda pro is be gone (turn on)
thank for everyone!
my jj is in bootload three day!cannt turn on
today i just update firmware of xda exec,finished! i do soft reset !my jj is be come back!
now i try update to cht! good luck!!

now my jj is cht!
if you want to update lanuage :
1:download rom and rar a new folder
2:delet firmware file
3:use no_id.exe to update,
maybe 5min finished ,it is fast!
then kick -and- and reset (hard reset)
now become cht version!
good luck

o2 Radio Stack upgrade Problem

Right Boffins of the XDA world.........................
Thinking caps on and herbal tea at the ready!
Right here's the history
I have a new XDA Exec.
It was running o2 's ROM but they were very slow in my opinion so I changed them to ClubIMate using the Universal_Upgrade_v1.30.68_radio_1.09.0 from this site. Not satisfied with that one (as it seemed a bit flaky in parts with some odd behaviour) I checked o2's website and found that they had done an upgrade and the reports and feedback generally seemed pretty good with the new ROM's from o2.
I have downloaded Xda_Exec_Upgrade_v113188 from their site.
If I run the executable it will fall over on the first step which is to install the radio stack update, with an error 120: country ID error. N-N-22-22-22
If I unzip the executable to a folder and addin the MaUpgradeUt_noID.exe to the folder and rename the radio_.nbf file to #radio_.#nbf and run the MaUpgradeUt_noID.exe to do the installing I can get the o2 ROM installed no problem. (Using the bootloader that is!)
If I then do the cold reset and go through the o2 customisation install process and get everything ready so it can be put into bootloader again, when I try to run the radio_.nbf (having hashed out the other two so they don't try to install again!) I get an error 114 message!
I have tried the following
Using another installation of Windows XP on my laptop to run the install (No joy!)
Using another PC (No joy)
Downloading the package using 3 different networks (I'm an IT professional by trade so customer's networks do actually come in useful for something it would appear! Other than users breaking them....ironic eh!).......(No Joy!)
I have tried doing a hard reset using the 2 - keys and re running the setup using the boot loader........(no joy)
I'm stuck and my fingers are developing into a claw from the constant resetting of this XDA Exec!
Has anyone any suggestions or questions?
Any help is much appreciated
First one to reply with an answer that fixes this gets a lottery ticket!

Sorry No lottery ticket!
However I thought a better suggestion would be I'll make decent donation of at least £20 and give credit to whoever comes up with the winning suggestion!
At least everyone benefits that way!
Fair???

Further Update to whats been tried and not tried
I've just tried running to update for the ClubIMate ROM and the associated Radio Stack that was downloaded with that one! and guess what
It didn't work! Same Error 114 as the o2?
I am getting the feeling that I have a hardware fault on my Exec!
The whole reason for reverting back to the o2 ROM's was a weird fault that developed last Thursday and the handset lost its ability to make or receive calls or texts or Inet access
I put it down to the ClubImate ROM, but now I am not so sure!
Any ideas though?
Send them in!
PLEASE!!!!!

XDA dead on rom update

Hi
I have just tried to update the rom on my xda exec (downloaded from the o2 microsite) it seems to load fine, but when i do a reboot I just get a wierd green & red speckled screen.
I have tried to update the rom twice now, once when the xda was on, & once from the bootloader screen.
Both times it seems to install correctly, but i get the strange screen.
HELP!!!
Add. My battery seemed to go to about 30% whilst i was updating. Could it be the battery? Can't charge it now to test. Can still get in bootloader screen.
PLEASE HELP!! Thanks

Same Here
I have exactually the same problem!
I downloaded the latest ROM from the My-XDA webiste (O2 Ireland) and it supports the XDA Exec as sold in UK and Ireland.
The upgrade goes fine but when I hard reset it just get a fuzzy screen full of red/green spots (lise interferance on a TV).
Have reinstalled the ROM from another PC and the same thing.
Can access the bootloader (v2.01) with no problem.
Have downloaded the ROM from another PC and tried from there and same thing?
Can anyone help?
Is there a known good ROM file that someone has used to rule out the file, as the XDA was fine until I ran the update.
Please help,
IrishLad

search be4 post

Update
I have tried 2 other ROM's on my XDA Exec and its exactually the same issue.
Once it gets flashed successfully and reboots i get the hazed screen which i cannot use. So its not the ROM file.
Has anyone got help with this, I have searched the posts already and found no solution that it why I have posted this thread.
Please Help,
Thanks,
IrishLad

So its not just me then! Thought I had cocked it up.
If this has already come up in these forums, I cant find it. Please at least send link to the previous problem if it is in here somewhere.
My XDA is dead!
Many thanks for your time & knowledge
Mark

try this one
try this configuration :
O2 XDA EXEC WM6 crossbow
Rom version : 2.02.00 WWE
ROM date : 03/10/07
Radio ROM : 1.15.00
Protocol version : 42.51.P8
ExtROM :UNLOCKED
have fun

the screen is funky but the xda is dead
I too am having this problem and am getting very frustrated.
I have searched the forum for hours and am not getting any closer to a sollution.
If anyone has resolved this problem in the past please send me a private message. I will love you forever if you do.

I had the same problem i think its a dodgy rom on the O2 website
I went into boot mode and used this ROM
http://forum.xda-developers.com/showthread.php?t=297256
Works a treat and is loads better than the normal o2 Rom

Thanks for the feedback
I have tried a few ROM's already with no success.
I will however try the ROM you posted and let you know if it works...
Thanks,
IrishLad

IT WORKED!
Not sure how, or why this worked.
But i installed the Crossbow ROM as listed previous and its working.
And can I just say the Exec is brillant now, its much faster, more responsize and works perfectly.
Thanks for the info, but I had tried 2 different ROM's previously and they never worked let I used one previously with no problems.
Either way I am now staying with Mobile 2006.
Thanks,
IrishLad

ukron is a god
YIPEEEEE!
IT WORKED
Thank you so much
I am very happy. Could you tell?

help
i have the same problem as you guys.
and more i can get my xda exec in to bootloader usb at the top and v2.01 at the bottom
but when i got to update it with the wm6 upgerade mentioned earlier
i get a connection error, please con somee one help
im using vista could this be the problem i have a hdd around some where that has xp on should i try that.
also i dont know is any of you knew but when ur in that messed up screen
if you press the lightbuld button a sort of i guess diagnostics or somthing screen pops up
Enable KITL NO
Clean Registry Hive NO
Formate Storage NO
you can change the no/yes's iv only got the enable kitl to do anything though. change it to yes buy using the buttons by the screen and then the center button it take you to the screen below
Select KITL Transport:
USB KITL
SERIAL KITL
ETHERNET KITL
Select KITL Mode:
ACTIVE
PASSIVE
any help with this will be appreciate

where can we find that crossbow wm6?????is that the one thats needed???
Someone please post a link 4 crossbow wm6 latest
would really b greatful...im it to me, email, or post it either way is good 4 me
THANKS,
Randy

no need problem solved....wm6 crossbow was def. needed

When installing WM6, ActiveSync auto disconects. What to do?

Hello everyone.
I have just bought my Hermes (AT&T 8525) after one year of planing so. It came with WM5. I downloaded some of the ROMSs, radio and bootloaders commented here. I tried reading all the vast infromation in this forum and the wiki, but still having a problem.
THE PROBLEM IS AS FOLLOW:
When I start the flashing process, using HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe or RUU_Hermes_CINGULAR_WWE_3.1.57.502.1_6275_1.48.00.00_108
... everything goes well, until the progress bar appears in my PC. When it appears, ActiveSync in my PC closes and my Hermes goes to stand by (the lcd goes off) so I cannot complete the installation process.
The phone works pretty well and I'm really amazed for all its capabilities. But still, I'm stucked with wm5.
Why do you think this happened?
PS: I flashed the radio (1.51.00.10) and bootloader (HARD SPL v7). My ROM version is 2.15.502.3. I use "ActiveStink" to sync my files without problems.
Any advice will be more than welcome!!

I'm no expert but that appears to be normal behaviour!
ActiveSync is only used at the start of the process. After a few files have been transfered, Activesync is closed and a different link is established. If you just leave it for a short while longer, a progress bar should appear on the Hermes too.

Yes, ActiveSync will disconnect. The RUU takes over the connection. Have you let it sit - sometimes it takes a minute for the progress bar to move.
Have you consulted www.mrvanx.org for help on the flashing?

todd_jg said:
Yes, ActiveSync will disconnect. The RUU takes over the connection. Have you let it sit - sometimes it takes a minute for the progress bar to move.
Have you consulted www.mrvanx.org for help on the flashing?
Click to expand...
Click to collapse
I'm having the same problem - always have. The message tells me that I'm disconnected and that I should check my USB connect etc. I left that box up there for about 15 minutes. Now I've closed the box and have waited several minutes with no activity. This is pretty aggravating. Thanks for any help.

try turning off your antivirus aplication. thats work for me flashing my tytn to wm6.

I've done everything.... I guess
Hi...
Yes, I consulted the www.mrvanx.org, excellent tutorials.
I flashed without problem the radio and bootloader. The progress bar started to "progress" and everything was fine. The only problem I have is flashing the WM6.
I don't remember where, but I readed that flashing the bootloader "Hard SLP v7" causes my HTC not to accept any Oficial WM6 ROM. The article said that I only had the chance to flash a coocked or modified ROMs. Is this true?
If not... what else can it be? I also closed all my applicacations including the antivirus, goback, disabled the internet connection, the logictec mouse center, etc. and nothing, the same as Chicoh happens to me.
"Error 260: Connection... check the USB cable bla bla bla."
Should I restart in safe mode to do the flashing?
Should I try to install a modified ROM?
Have in mind I've tried three different official ROMs: WWE, Cingular and spanish.
Thanks to all the comunity!!!
Saludos desde México!!

Greetings -
I had a similar problem and couldn't get the thing get going. My solution was to load it from the SD card. This worked flawlessly.

liquidsilver said:
Greetings -
I had a similar problem and couldn't get the thing get going. My solution was to load it from the SD card. This worked flawlessly.
Click to expand...
Click to collapse
I'm trying that as we speak. I have a good feeling about this. I'm a little concerned that I didn't think of it though. Makes perfect sense - Skip the middle man.
UPDATE: Crap. No luck. Thanks all the same though. I'm not giving up.

What OS are you using, xp or vista? My vista 'top had the same problem wouldnt flash for the longest time and i had to use my xp.
However, it does work now. Not entirely sure why.

Now I had success!!!
Hello my friends.
It seems that the article I readed days ago detailing that after flashing the Hard SPL v7, I could only install a modified ROM, not an official one from HTC or Cingular.
I downloaded Black Satin and installed it without any troubles. The entire process lasted only 3 minutes!!!
I wanted to have an official ROM, don't ask me why, and never tried the "other" ROMs that are actually excellent!!! some apps that were on WM5 are not in WM6, which is kind of sad, but if there's something that I love of WM Smartphones is that I can download and install whatever I want or develop it if it doesn't exist!!!
By the way, I use Windows XP Pro.
Thanks for all the support!!!
PS: Before flashing the Hard SPL v7, I tried installing the cingular WM6, but didn't make it. That's why I readed almost all the pages and threads here in xda-developers and found that flashing a new bootloader was a very good idea. The rest of the story is known by you.

No Connection with official AT&T WM6 Rom

After many flashings of roms, I finally flashed back to the official AT&T WM6 rom located at the link below:
http://forum.xda-developers.com/showthread.php?t=334771
My phone, even with my new sim card doesn't pick up any reception at all. All I get is the two arrows with the "x" and that other weird symbol with the exclamation point next to it.
I have a tilt and when I pop my sim inside, it works perfectly, no hiccups what so ever.
I live here in Hawaii and we just recently turned on the 3G network and I'm not sure if it affects my 8525.
Any ideas on what may be wrong? I had used Black Majiks WM6 on my 8525 previously but this past Monday I had issues with it so I tried flashing a bunch of times and still no fix.
I've searched through the threads for the last 2 days and everything I've tried so far hasn't work and I'm really desperate and need input from more professional users. PLEASE!!!

More information regarding phone problem.
When I try hit the green phone button, it doesn't do anything. Also going to phone settings under the settings menu, and it doesn't go there! Don't know why, I try to click it and nothing. Other icons work, not that one though.
This is getting ever more frustrating and I'm still searching through the thread for possible solutions, but nothing. Someone out there has to have some clue as to what may be wrong!

Found out another thing that might be of importance.
When I reset my device, soft or just turning it off and on, I get a "No GSM" on the AT&T screen.

Man, I've even gone as far as visiting Mr. Vanx's site to downgrade everything back to WM5. I still get the "No GSM" on my startup screen and no connection!
WTF?????????????

Well if you can get to the boot loader try flashing the official rom from HTC's Site for your phone. I'm not saying the one you DLe'd from here was bad but maybe it's just not the right one for your phone for some reason.
http://www.america.htc.com/

Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.

Scrambler001 said:
Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.
Click to expand...
Click to collapse
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?

Xyberz
Check your PM's

Xyberz said:
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?
Click to expand...
Click to collapse
I agree, anyone have it I can download? I keep getting lockups on my 8525 with the Schapps build and I want to try the offical build to see if it's the device or the build........but it downloads SOOOO slow......

Just finnninshed uploading RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe the Official ATT/HTC America file to Media Share. Here is the link for you. Hope it helps, let me know.
http://www.mediafire.com/?e0wkzvgm6ym
or
http://www.mediafire.com/?sharekey=ab1a9d4d5155409591b20cc0d07ba4d2067ccab3e6e21d05

Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.

Xyberz said:
Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.
Click to expand...
Click to collapse
Well I like using Hard-SPL V7 especially for the cooked roms as it gives you a bit of safety, but the rom I uploaded here is the Official HTC America / ATT Rom so you can follow their flash instructions for it. I even successfully flashed this ROM from VISTA 64 bit with no problem to my Herm 100.
As with any Flashing their is always a risk if something should go wrong that you will have a brick but your already near that point as you can't do anything with the phone at this point anyway.
GL & let us know how you make out.