Hi.
My power button broke off and I was not able to soder it and so now I can't turn it off or on. I have a app that will do this for me but what I really need is to put my xda IIs in BOATLOADER without the need to press, power,record button and soft reset. So I'm asking if anyone knows a way for me to do this without the power button. I have searched and seearched and I really need some help here. I'm running WM5 but I am having problems with the backlight and camera and some of my paid software that will not work. So I want to downgrade to the original rom.
I will be watching this post every hour or so, your help is greatly appreciated.
Thanks.
that happened to mine, do you want to just like hard resest your device? THe only way is probable to take your battery out and let the internal battery drain!
I took my phone to my local phone repair shop and they charged £15 to it, apparently it was really difficult to do!
Thanks for the reply andy! I thought this forum was way better than this in helping people out. I appreciate your response. I do know how to give it a hard reset by pressing the camera and record button as I do a soft reset. But what I am trying to do is to get my xda to the bootloader position so I can go back to windows 2003se. From what I have read you can only do that by pressing the power button and the other buttons I wrote above. I have no power button so I'm trying to find out another way to roll back to windows 2003se.
If anyone knows please let me know.
Thanks again.
In the magician shipped-roms there's an executable to do this, maybe for your device too? If there's one you'll recognize it at once, just execute & its gone into Bootloader.
Regards, M
I looked and there is none in my ppc. I also copied that file over from a download I found here and it does not do anything. So far I have the WM5 running pretty fast, faster than ever! I just can't get the backlight to work and the camera. Tried every file and nothing gets this fixed. So I have to use my xda with the backlight in full brightness.
Btw, there is a way to hard reset the device so that it will run really fast. I probably will start another thread showing the steps, I think it is so worth doing it cause my xda now movew really quick.
Thanks for all the help!
Related
I have had a search for the following but was unable to find anything that matches....
all my buttons have stopped working on my mdaIII on t-mobile. the sliding keyboard works fine, but none of the others work at all....even the power down button.... so im unable to take pics/vids.... end calls etc....
can anyone help?
thanks
Soft-reset the device. If the problem persists, I recommend that you send your device to your dealer. I hope you still got warranty.
If a soft reset does not work, its probably worth trying a hardreset berfore returning the device too. Hope that helps
Makes me wonder how would he be able to perform a hard reset with the power button not working!
thought someone would ask that... How about taking the battery off and then while depressing the reset with the stylus, replace the battery ;-) Worth a go...
thought someone would ask that... How about taking the battery off and then while depressing the reset with the stylus, replace the battery ;-) Worth a go...
hey guys..
i'm a new member to this site and i found the things talked about a lot interesting.
and would like to try out some of them but currently i think i'm in a diff situation wherein i have a xda iis (blue angel) which has traveled down my family chain for the last few years.
i have absolutely no idea about anything in it.
and somehow it is in bootloader mode through the execution of the enterbl.exe file.
now i'm unable to restart it by hard reset. and am unable to connect to it through mtty.exe
i was looking around in google until i stumbled on here. i did find the information valuable here. but i couldn't find the part to help me out.
has anyone faced such a situation.
i'd be greatful if u could plz help me out.....
We'll try ...
Hey attractiveaki,
Welcome to XDA-Developers forums
We'll sure try to help a fellow BA user get round their troubles!
So, tell us, what have you tried so far?
Have you tried the information on the following page?
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
And what about removing the battery overnight?
Watching and waiting...
Bird
thanks for the link but i already tried that...
i also tried to hard reset it a number of times but no use.
i tried to open it by connecting it to my laptop but i can't open it in mtty as well
gives an error that the port can not be opened.
also the bootlog mode automatically closes after a few mins and its difficult to come back to even this phase.
ryt now my cell is just completely switched off.
and another thing i had a windows mobile 2003 version not a windows mobile 5.
besides that i dunno anything ..
not even the language code or the area of purchase.
help me if u guys can..
How about this then ... ?
Try the following:
1) press the D-Pad centre button and then the mail button
2) press and hold the power button, then (keeping the button pressed) use the stylus to press the reset button - hold both for 30 seconds and release
Let us know what happens!
Bird
thanks for the tip but no use still....
i tried to remove the batterey overnight but its no use
then this method also is not helping.........
can i have it done at the local mobile shop.
or would that be useless as well...??
Only option
attractiveaki said:
can i have it done at the local mobile shop.
or would that be useless as well...??
Click to expand...
Click to collapse
Looks like it's your only option now!
I'd check the prices for a BA on eBay first, just to make sure that you aren't paying anymore than that to have it fixed!?
Sorry I couldn't help
Bird
Whats happening with the S?
I had one in 2004 and sold it earlier this year.
Could be the battery is not holding it's charge?
Does it power on when connected to a USB port/mains?
I bought a 2nd hand XDA Orbit with all the correct software and that. I've had a problem with it before, nothing a good hard reset couldn't solve. But today, I did exactly the same thing for a hard reset, and now doesn't go past the O2 screen and just goes black!
I cannot hard reset again, and I cannot go into the bootloader (hold power + voice thing on the other side, push the reset with stylus and let go while still holding the buttons on either side). I'm rather scared I've bricked the device, but I am sure the previous owner did not load any unofficial ROMs and I haven't either and I still have the original WM2003 CD. Wouldn't be a problem if I eventually had to go to an O2 shop would it? Lets hope it can be sorted! And seeing as quite a few people have had this with varying degrees of sucess, I fear my luck may be out with this thing .
I hope someone can point me in the right direction.
Oh and I don't think my device i CID unlocked, does this matter?
Thanks in advance x
fixed
mods..can u please delete this now pointless thread!
it was down to my own stupidty...so thank you for the people working on a response...well if you were!
Hello, I don't know much about what i'm doing guess u can call me a virgin to the modding game. I'm a blackberry user so please bare with me. I'm thinking about joining team droid and I found my moms old HD2 lying around. It was having problems (un responsive touch screen) and I managed to find a place to fix that. I walk out the repair shop and start driving home and the phone is rebooting itself, stuck on a screen that says NRG Energize. I'm guessing whoever gave it to her had a rom installed? Now i tried holding down the volume down button and the power button, and also holding down the volume down button while pressing the reset button on the back but all that does is bring me to a multi colored screen that doesnt go away and reads:
PB81120 HV B3
SPL-2.08. HSPL 8G XE
'
can anyone, if anyone tell me where do i start in fixing this problem? any helpful links? advice on if i can get passed this, if theres a better rom out there and how i would go about installing.
please and thanks in advance. sorry if i am posting wrong or if theres another post i should be looking at, any guidance would help.
Armani_X said:
Hello, I don't know much about what i'm doing guess u can call me a virgin to the modding game. I'm a blackberry user so please bare with me. I'm thinking about joining team droid and I found my moms old HD2 lying around. It was having problems (un responsive touch screen) and I managed to find a place to fix that. I walk out the repair shop and start driving home and the phone is rebooting itself, stuck on a screen that says NRG Energize. I'm guessing whoever gave it to her had a rom installed? Now i tried holding down the volume down button and the power button, and also holding down the volume down button while pressing the reset button on the back but all that does is bring me to a multi colored screen that doesnt go away and reads:
PB81120 HV B3
SPL-2.08. HSPL 8G XE
'
can anyone, if anyone tell me where do i start in fixing this problem? any helpful links? advice on if i can get passed this, if theres a better rom out there and how i would go about installing.
please and thanks in advance. sorry if i am posting wrong or if theres another post i should be looking at, any guidance would help.
Click to expand...
Click to collapse
This should probably be put in the HD2 Android NAND Development Forum of the HTC HD2..... but I'm gonna help you anyway!
First you should look at this: http://forum.xda-developers.com/showthread.php?t=1021837 read it and study it GOOD!!
Then choose a rom from here: http://forum.xda-developers.com/forumdisplay.php?f=928
Use the instructions from the first link to flash the new rom.
Thanks, prior to reading this i was able to get the stock rom from t-mobile and load it up from my sd card. Now my issue is if it starts up it freezes during set up and goes into a bootloop or it just goes thru a bootloop when i turn it on. I guess the first step (from what i've read today) is when i get home to check the battery pins? not even exactly sure how they are suppose to look but i'll mess around with them (hopefully they dont break) when i get back home... i'm at work unable to focus thinking about fixing this phone lol.
So hello community !
I have an OPPO Find 7 device, and I love, but happens that I have some problem with it, let me explain it best I can
It turns out that I simply cant Power ON the device, no matter what I try, no matter what combinations of key I am using or so. Let me explain better.
As I was using one day my phone standard it happened the lock/power key doesn't respond every time I press it, and it was so, sometimes the phone reacted to the button some times didn't. One day I had the device, and forgot to charge it, and it went completely off, so I can't even boot it up. Went to an mobile center, where they repair mobiles or so, it is small place, I explained them what is the problem, they told me it is the button power supply or so, and fixed it. That was nice, finally I had my OPPO again. After 2 or 3 weeks, again the same problem with the button didn't responded and I again took it with me and gave it to the person that fixed it the first time. They said the it is kinda complicated or so, I took it to other place to see if they could fixed it, they told me it is the POWER SUPPLY to the POWER/LOCK key. It is a waste this phone to throw it in garbage because one maybe small problem if you ask me .
Hopefully someone will see this and reply to me, I still have the phone just cant power it on.
P.S The battery is fine, the charger is fine, tried every combinations of key (just the power key doesn't seem to reply in any way or it cant get power supply). I have some minor knowledge in phone's I can tear it down but I need help or maybe solutions from you guys. Thanks again !
Still no-one that can help me maybe somehow
Did you buy it from oppostyle?
Yes that is correct, look forward to your reply and any others who think they can help ?
VASILEVSKI said:
Yes that is correct, look forward to your reply and any others who think they can help ?
Click to expand...
Click to collapse
Hi, do you still have this issue?
Did you just upgrade your phone before this happen?
Yes I still have this issue, I didn't upgrade my phone before this issue. I don't think it is an software error tho....
Got my phone still sitting in my shale
I was facing similar problem, but in my case I cannot charge the phone, and it turn out to be software problem during upgrade.
I went to oppo service center and they re-flash with the latest ColorOS then my phone back to normal.
I thought if you just upgrade your phone, you might face same issue like what I was. Or maybe you can try to go to oppo service center?
Try this. http://community.oppo.com/en/forum.php?mod=viewthread&tid=23067
If its software related this will fix it. If it doesnt I dont know anymore.
Hi
Does your phone vibrate ?
Snorl4x said:
Hi
Does your phone vibrate ?
Click to expand...
Click to collapse
No it doesnt vibrate... The power on off button dont respond
Send back to Oppo to repair or mobile shop to repair power button. Its not difficult if its only problem on button.
Power button problem
this site helps you in fixing that issue.. try it
https://www.ifixit.com/Guide/Oppo+X9000+Power+Button+Replacement/31581
VASILEVSKI said:
So hello community !
I have an OPPO Find 7 device, and I love, but happens that I have some problem with it, let me explain it best I can
It turns out that I simply cant Power ON the device, no matter what I try, no matter what combinations of key I am using or so. Let me explain better.
As I was using one day my phone standard it happened the lock/power key doesn't respond every time I press it, and it was so, sometimes the phone reacted to the button some times didn't. One day I had the device, and forgot to charge it, and it went completely off, so I can't even boot it up. Went to an mobile center, where they repair mobiles or so, it is small place, I explained them what is the problem, they told me it is the button power supply or so, and fixed it. That was nice, finally I had my OPPO again. After 2 or 3 weeks, again the same problem with the button didn't responded and I again took it with me and gave it to the person that fixed it the first time. They said the it is kinda complicated or so, I took it to other place to see if they could fixed it, they told me it is the POWER SUPPLY to the POWER/LOCK key. It is a waste this phone to throw it in garbage because one maybe small problem if you ask me .
Hopefully someone will see this and reply to me, I still have the phone just cant power it on.
P.S The battery is fine, the charger is fine, tried every combinations of key (just the power key doesn't seem to reply in any way or it cant get power supply). I have some minor knowledge in phone's I can tear it down but I need help or maybe solutions from you guys. Thanks again !
Click to expand...
Click to collapse
Sorry, didn't realized you replied my comment already. Since you purchased your device from Oppostyle, i would suggest you to do RMA. However, the process is going to take quite a long time.