Related
I've been reading the forum, and based on the information and the tools there I have been able to modify my extended ROM, which is great. Now of course I'd like to modify the main ROM as well, but despite the many hours I've spent searching the forum, I can't find the necessary information to do it. There's always something essential missing, something which probably is obvious to a programmer, but not to a normal user. As I've been able to modify the extended ROM, I guess I should be able to modify the main ROM too. Who can point me in the right direction?
from what i understand it's not even 100% possible with xda1 since people cant seem to make the extracted files back to a nbf file
and there are no tools that i know of that even extract the main rom from a xda2
As I understand it, when you upgrade the operating system, you're actually modifying the ROM. Some people here like to call it to "flash", I think, and there are a lot of messages about it in here. I just haven't found the information necessary to do it. I want to modify the ROM on my XDAII.
no the operating system is the rom which is in a eeprom in the device
when you flash the rom you replace the operating system with the new one
when you say modifying it mean more in the way of exchanging different files inside the rom
but if you just mean flashing the rom with a newer then here is a guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
What does EEP stand for? How many ROMs are there?
I've seen a ROM created here for the XDAI, containing more programs than what the devices normally come with. I would like to have a ROM on my XDAII containing the programs I use, so that I don't need to reinstall them every time the device is hard reset. Isn't this possible?
What does EEP stand for?
Click to expand...
Click to collapse
huh what does EEP have to do with this ?
suppose it could stand for
Executive Excellence Publishing
or
European Environmental Press
how many roms there are i think there are 1.5 1.6 1.66 and 1.72
about extra programs then they are not! in the rom they are in the extended rom any CAB file you copy to the extented will install after automatic after a hardreset
you should take a look at the romkitchens ( specifically for xda1, but can be made for xda2 as well ).
and mkrom, and the other romtools
EEPROM stands for "electrically erasable programmable read only memory".
this is sort of the predecessor of flash memory.
"electrically erasable programmable read only memory" sounds like a contradiction, but thanks for that, it makes more sense than EEPROM.
What about all of us users who don't have a Unix machine? I suppose we're stuck with the original ROM then, and have to install our programs over and over again for every hard reset. Of course you can put a few of them in the extended ROM, but it becomes full too quickly and you're left with installing the rest of them manually.
well you can upgrade to a newer rom as they come out
like i have 1.66 but if i wanted 1.72 i could upgrade
about contradiction heh yeah suppose so but then if it was 100% always READ ONLY then it would be random was what in it as how the transistors randomly set when it was produced
A newer ROM wouldn't contain the programs I want.
no :/ but it could contain bug fixes for ms and radiostack and such
i suspect that extented rom was made so it would be easier for the phonecompanys' and other 3th party resellers to get programs preinstalled fast without having to mess around too much in the rom
this is at the cost of memory though
but then some programs dident like to be in the rom i believe here i mean if setting files were places in the rom aswell and the program could not write to the setting file
mkrom also works on cygwin under windows.
( now I also wrote this in the wiki page )
Isn't that just for XDA I?
it works for windows ce in general.
that doesn't mean that there is no work involved in getting it to work, but it is possible to make it work for the xda2. I use it to build custom roms for the devices we sell, that is why I wrote it in the first place.
What's cygwin?
How much space is there in the ROM to add extra programs? In the ROM that this forum developed for XDA I they added quite many programs from what I could see.
http://www.google.dk/search?hl=da&ie=UTF-8&q=cygwin&btnG=Google-søgning
Thanks for that, Rudegar.
To Itsme: I don't mind the work, but it looks like its written for programmers and that if you're not a fairly skilled programmer, you wouldn't be able to do it.
Hello everyone,
Xperia is my first Windows mobile and therefore kinda novice to some terms used in this area. My colleague helped me in installing new ROM HTC touch it. It now looks like an HTC phone with cool graphics.
I know mine is tf3d but how can i verify. Also I keep listening to terms like manila, jailbreak, brick etc can someone explain me what these terms relate to. Need little overview of all these terms used.
I tried to install new themes and therefore installed tf3d config tool but it doesnt work on my X1 gives me an error.Is there any other way of installing these themes. Mine is the default black theme.
Hey sandy,
you can check your version under the Settings tab in your TouchFlo at the point "Info".
Also, if you can switch your home clock back and forth i can assure you its TF3D .
By Manila is meant the same as with TF3D(TouchFlo 3D). Jailbreak is usually used to be a name for an iPhone hack, but in our case you can categorize it as something connected with HardSPL. It's a tool that patches your phones rom manager and allows you to flash it with custom roms(like the one you got from your friend - means that your phone is already equipped with it).
I'm not sure about compatibility with the config tool since i've never used it, but i can tell you that the easiest way of applying themes is the usage of cabs.
You can find different theme-cabs in this section (themes and applications).
If you have any other questions I'd suggest you just to ask in here.
Thanks mate for clarifying, do you have a simple procedure on how to flash rom and install new custom roms. As for theme cab file is it possible for you to provide me with one theme cab file i just wanna test it out before downloading others. I assume i can revert back to my original black theme incase i dont like the new one.
hello m8 in this thread there is very usefull tutorial on how to flash custom roms and if u bored there is also tutorial on how to get back to official sotck rom. read it carefully and in 20 mins u will become profesional flasher http://forum.xda-developers.com/showthread.php?t=431218
i hope i helped you
The link you provided is about hardspl whats the next thing to do after hardspl? How to install custom roms available in this forums? Is there a procedure for doing this.
Actually there's always an .exe file with the rom package.
you simply start the .exe and follow the steps described.
The only thing to care about is a stable activesync/dev centre connection and a battery life of above 50%
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
egzthunder1 said:
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
Click to expand...
Click to collapse
GOOD IDEA!
Hi there Gents any input
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
Did you install the CDMA home weather fix?
joshmxpx said:
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=628353
Good luck!
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
As far as WMP, Barogi will have to look into it since it is his rom.
One last thing, please do not double post. Thanks for understanding...
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
AaronNZ said:
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
Click to expand...
Click to collapse
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Question from motoyola
motoyola said:
Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
Click to expand...
Click to collapse
Look in my signature. There is a guide for unlocking as well as superCID unlock the device. Let me know if you need help.
egzthunder1 said:
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Click to expand...
Click to collapse
Thanks, that link is broken, but I found it here (along with some other handy things)
http://www.webcoast.net/temp/
i just flash my vogue with the latest NFSFAN rom. can someone tell me the setting to get my gps to work? whenever i start googlemap it keeps on trying to connect through the data connection. (i did do that one step that NFSFAN asked for the gps dL that verizon cab)
Question from mac+htc
mac+htc said:
Hey everyone,
So I was running NSFANS 6.5 ROM on my device (Amazing ROM btw) But I needed to revert back to the stock rom. I used the VZW updater to go back to the stock rom and I changed the esn on line. When I dialed the *228 and choose option 1 I got a failed message. So I called customer support and he walked me through a manual programing. Well that got voice working but when I went to use the data it wouldn't work. I made sure all the network settings were right, and I still couldn't connect. Well then I hard reset the device and now I am back to square 1. No voice no data. Is this something from NSFANS rom that is messing the phone up? I don't want to call again because their tech support takes forever and I am afraid they are just going to tell me to take the phone into the store. Thanks in advance!
Click to expand...
Click to collapse
Why did you change the E$N? Where you using the device in a different carrier?
Back to your problem. Your EPST settings should survive a hard reset as those are parameters that are not stored in Windows (afaik). It really makes not difference which rom you are using (at least for Voice and SMS).
Lets focus on your main phone's capabilities first. If your EPST settings truly got lost, you will need to get them from Verizon again. The main ones are the MSD and MIN. Make sure that you write them down this time as you will need them again if they go bye bye.
As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)
Do that and let me know if this works. They will have to program this for you this time, but once you have the values that I mentioned before, you will be able to do it yourself.
Question from pasdabeer
pasdabeer said:
I have android 2.1 currently on my vx6900, Id like to go back to close to stock Rom, but without all the verizon carrier "flavorings" and rescrictions.
Any ideas? Personaly I liked the simple clean useage of win 6.0 without all the extra graphics ( besides the HTC home plug in and the touch flo )
thanks in advance.
Click to expand...
Click to collapse
Try to get Barogi's latest "lite" rom. Also, you can't go wrong with vin's 28014 or NFSFan's rom. I would recommend mine, but I think they might be a little heavy for what you want. Good luck.
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
pasdabeer said:
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
Click to expand...
Click to collapse
Try to avoid stock if you can... it has a bad tendency of being too heavy on the extra apps.
I checked out just SS's of both. Both look awesome, but theres something about the simple look ( or im just used to it since my 8125 ) of the stock look. I would like to have the look but the added memory of a cooked rom.
With NSFSfans, could you remove the today screen plug ins to get back to a more stock look?
Im runnin 2.1 android eclair at the moment, and im barley pulling a full day battery with no data/bluetooth. With the old winmo, I was getting 2.5 days-3days. Thats another main concern for me.
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
pasdabeer said:
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
Click to expand...
Click to collapse
Which one are you looking for?
egzthunder1 said:
...As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)...
Click to expand...
Click to collapse
Verizon is [email protected]
Is there a cab or anything that'll give me the Sense 2.5 email tab for my Sense 2.1 TP2. I only found one cab (kimi_sae_ireba) but it didnt work correctly. There's a lot of white and out graphics issues. I saw something in that post about editing the 220edf70_manila file for a WVGA device, but I wouldn't know how to do all that. Id love to have it tho, so any help would be appreciated.
Assuming you're still on a stock ROM as most people who use TF3D are, why not move up to a 2.5 ROM that has it? Development on 2.1 is all but ceased. There are very few chefs who still cook it in to their ROMs.
If you are stuck on having 2.1 over 2.5, try out Jackos Sense 2.1 ROM. It's very popular and stable.
Outside of these suggestions, maybe you could per$uade a chef or someone to mod the mode9 file you need to make it work. I wouldn't expect much, though.
My SmartMOVE ROM (Sense 2.1 + WM6.5) does have included the e-mail tab from Sense 2.5 mod by kimi_sae_ireba and it does work fine
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
jwatts03 said:
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
Click to expand...
Click to collapse
Why not just flash Jackos' ROM? It manages memory way better than the stock ROM. You'll have more RAM and a more stable experience overall in my opinion.
I did just look at that Rom, and I would kinda like to try it. I only have 2 problems. 1, I have lots of programs. And dont really wanna have to go through that whole process again. And 2, it has (SP1) (SP2) to download after the Rom, and Im not really sure what those are.
jwatts03 said:
I did just look at that Rom, and I would kinda like to try it. I only have 2 problems. 1, I have lots of programs. And dont really wanna have to go through that whole process again. And 2, it has (SP1) (SP2) to download after the Rom, and Im not really sure what those are.
Click to expand...
Click to collapse
What do you mean SP1 and SP2? Have you flashed a ROM before? If not, then you have a bit of reading to do before flashing all willy-nilly. Head over to the flashing for noobies thread to get a bit more info on the topic.
The proper order for flashing new ROMs is to unlock the SPL on the device, perform a task29, flash the stock ROM, task29 again, then flash the custom ROM. The first time is always a little scary.
Ive flashed before. I thought I found a good rom but this one looks like it might be even better. But look at this post I found http://forum.xda-developers.com/showthread.php?t=632617 After the rom download link it has 2 separate "SP" files to download too. But I dont know what those are.
Also it says it has Tom's autoinstall installed in the rom, will that install to the phone or the storage card? I dont want everything installed to the phone.
jwatts03 said:
Ive flashed before. I thought I found a good rom but this one looks like it might be even better. But look at this post I found http://forum.xda-developers.com/showthread.php?t=632617 After the rom download link it has 2 separate "SP" files to download too. But I dont know what those are.
Also it says it has Tom's autoinstall installed in the rom, will that install to the phone or the storage card? I dont want everything installed to the phone.
Click to expand...
Click to collapse
Next time, searching would likely answer your questions more quickly.
SP1 explanation
SP2 explanation
As far as Tom's autoinstall, yes it does install to the internal memory. There shouldn't be a need to reinstall everything to the SD. Some of them have settings that install to the internal memory or the registry, but the majority of them that you install to the SD stay there. For more questions about Jackos' ROMs, please ask on that thread. You'll get much better answers there. Jackos supports the ROMs very well. Just make sure you read and search properly before firing away with the questions, just like on any other thread.
jwatts03 said:
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
Click to expand...
Click to collapse
Just install this: Sense 2.1 Email Tab Add-on V3 ported from Sense 2.5*
And later that: WVGA fix.
Here is the post: http://forum.xda-developers.com/showpost.php?p=5202526&postcount=3 Just look in the tweaks/mods section.
PS You don't need to edit anything Just ensure that you're running a Sense 2.1 (not TF3D) ROM.
The company I work for uses a horrible old product called Cognito.
We are developing an Android App to replace this but in the meanwhile we have a problem - within our budget we can only run this on Rhodium devices and with specific ROMS.
We have trouble getting decent Rhodiums and finding ones with the correct ROM is even harder. I now have a box of them with the wrong ROMs.
I have searched around for the specific ROMs we need but it seems that mos of the download links I can find have gone.
Even when I can find a ROM that seems to be OK, there always seem to be other issues.
I think the following ROMs should work (in theory):
- 1.86.401.4 (67102) WWE
- 1.14.161.6 (50207) WWE
I figure the next step would be to dump a working ROM and write that back to the other devices.
Can anyone tell me in simple steps how I can achieve this? I have started looking into ROM kitchens but it has far more detail than I think I need and I feel a bit swamped with it all.
Thanks
Update
I have managed to get the RAW files from a working device using this thread:
http://forum.xda-developers.com/showthread.php?t=501871
However, I cannot find any tools to put these back together. All the links seem to be dead
I know this is an old thread, but did you ever figure out how to dump the a rom from a working phone and restore it again?
I have a TP2 Rhodium 100 set up with WM6.5 just like it should be(with all the tweaks and apps), and I'm going to give it to family - But I don't really like to have to set it up again all over, so a way to make a rom dump and restore it would be really nice
Its now 2015 - there must be something (I have searched and all threads and post seem to be either dead or the links don't work or the programs are not available anymore).
JBJ