Replaceing a screen - MDA III, XDA III, PDA2k, 9090 General

Is there a guide to how this device comes apart?
I remember there was one for the xda II but is there one for the blueangel?
Many thanks

Taking it apart is no problem, I've already done that. What I miss is the replacement screen... :?
2 screws on the sides, 4 under the battery. Remove cover, remove the keyboard connector on the side and the screws that hold the PCB. Slide screen up, lift the PCB carefully and dicsonnect the 2 flat cable connectors.
Then remove 4 screws on the screen part, 2 at the top and 2 under holes at the bottom.
Any idea where to find the screen?

screen
you can get a sreen here http://www.pdasmart.com/pdaphonexda2s.htm
the cost is $250 delevered anywhere in the world hope this helps i know its not cheap. but this is the only source that i have found.
or http://www.apexlaptops.co.uk/xda.htm
offer a full repair service but im unsure for there cost as u need to email for quote.

anyone know where i can get a replacement case? I dropped my sx66 twie already and it is pretty banged up.

kilrah said:
Any idea where to find the screen?
Click to expand...
Click to collapse
Which one:
http://wiki.xda-developers.com/index.php?pagename=BlueangelBoardIDs
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD
If you need 60H00018
http://www.parts4pdas.de/cgi/websal...fc}{md5/0ca94eea8a008b08e23c10da58a8679c/md5}
try to call this company
Code:
SRS GmbH
PDA Service Center
Kilianstädter Strasse 48
61137 Schöneck
TEL. 06187 9064-0
FAX. 06187 9064-11
E-Mail: [email][email protected][/email]
Internet: [url]www.srsgmbh.de[/url]

Oops thanks for that, I wasn't aware of the 2 different ones. Haven't finished dismantling mine cause I miss the smaller screwdriver for the 2 top screws of the screen part...
Will try and find one.

You can order the touch screen for $80 ( included shipping)
visit www.goldenbyte.com
Reseller wanted!!!!
or You can email to me at [email protected]

You can buy the screen for $80, www.goldenbyte.com
kilrah said:
Taking it apart is no problem, I've already done that. What I miss is the replacement screen... :?
2 screws on the sides, 4 under the battery. Remove cover, remove the keyboard connector on the side and the screws that hold the PCB. Slide screen up, lift the PCB carefully and dicsonnect the 2 flat cable connectors.
Then remove 4 screws on the screen part, 2 at the top and 2 under holes at the bottom.
Any idea where to find the screen?
Click to expand...
Click to collapse

apex laptops are stupidly expensive

any one got the disassemble in pics by any chance. I wanna make sure i d it right without n e more costly mistakes. (the first costly mistake being drunkenly dropping it )
Thanks
Rich

Hmm, finally finished the disassembly (how stupid I am, had forgotten I actually had the suitable screwdriver bit somewhere in my mess)...
I have the Toppoly TD035STEC1 screen. Still trying to find a supplier, the one mentioned above does not really seem of confidence to me... :?
I might take a few pics when I have time :wink:

kilrah said:
Still trying to find a supplier, the one mentioned above does not really seem of confidence to me... :?
Click to expand...
Click to collapse
Their webpage says now "not in stock"
I think another one was
http://www.handy21.de

http://www.handy21.de
Click to expand...
Click to collapse
Wow, I could get another entire second-hand unit for that price :?

kilrah said:
I might take a few pics when I have time :wink:
Click to expand...
Click to collapse
Did you ever get the chance to take those pics Kilrah, If you did I would be very interested to see them, I'm sure they would be of intrest to others too.
Cheers

yep they would, still looking for the cheapest supplier of the acutal LCD as well
n e one found cheaper than $225 http://www.pdasmart.com/pdaphonexda2s.htm
which is around £131 with the current conversion rates..

Related

looking to replace the AMOLED screen on my Vibrant

ok so I managed to crack the screen..nice big shatter mark under the screen and now the entire screen went black...insurance is a pain and from what I understand getting Asurion to replace my vibrant will be $130 and buying an AMOLED screen itself is cheaper.
The rest of the phone is still in working condition as before my screen went totally black after it broke some of it was still functional.
Any idea on where I can get the screen? I have not had luck on ebay as of yet, and was hoping someone here could recco a reputable vendor...
Aliexpress? aliexpress DOTcom/product-fm/342627474-Touch-Digitizer-LCD-Display-AMOLED-Screen-origianl-i9000-for-T-Mobile-Samsung-Vibrant-t959-Wholesale-wholesalers.html
Etech? etech DOTcom/cell-phones-lcd-screens--c1144_1156?page=3&m_id=12&sort=20a
www.cnn.cn maybe? it about $70 +sh
Wow wish I would had found this post sooner...
I dropped my vibrant from my and it was in the case.. it landed flat on the screen..glass did not break but AMOLED screen enploded.. I didnt know until i got to my car and tried to make a call. Crap...I dish out the $130.00 bucks ...bummed out about that..
oh man ...
Still great site and price. Thanks
Thanks I'll try cnn.cn. I see some decent reviews about them.
Is there a tutorial on how to replace this? Or would you have to get someone to do it?
Sent from my SGH-T959 using XDA App
noemberday said:
Is there a tutorial on how to replace this? Or would you have to get someone to do it?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
youtube.. just search for it..
I cracked my screen also. I found that site after I put in the claim. So I figured what the hell and started taking it apart, for next time.
It isn't easy! I'm pretty nerdy and good with my hands. Be very careful and very patient. There are small parts and wires that can very easily break.
Sent from a Samsung Vibrant.
ok so I got the screen...and this thing is hard as hell to swap...anyone have any ideas? I dont want to further damage anything...
I did find this... http://www.careace.net/2010/06/09/disassembly-of-the-samsung-galaxy-s/
FYI incase anyone else is looking for where to buy from.
http://www.globaldirectparts.com/Samsung-T959-LCD-Digitizer-p/smsng6085995.htm
Have you had any luck with this?I own an Orange San Francisco and cracked the amoled,unfortunately orange or any other site/company offers any repair AFAIK. I'm looking into repairing it myself, are amoled connectors compatible from one phone to another or are they manufacturer specific if you are aware of? I know this is a long shot but it doesn't hurt asking.
Chrishas said:
Have you had any luck with this?I own an Orange San Francisco and cracked the amoled,unfortunately orange or any other site/company offers any repair AFAIK. I'm looking into repairing it myself, are amoled connectors compatible from one phone to another or are they manufacturer specific if you are aware of? I know this is a long shot but it doesn't hurt asking.
Click to expand...
Click to collapse
it would most likely have to be the same part
because the Galaxy S series are the only ones with that size AMOLED screen.
been there done that
i got a vibrant off of something awful for pretty cheap with a broken screen
first off you literally have to pry the screen off of the phone
and the bottom four buttons? there is a very thin ribbon cable that is glued to the screen
there are a few things youll need
1.really small screw driver (i got a glasses repair kit from the dollar store. worked great)
2.something to pry the screen off (used a screw driver from said kit)
3.balls. that ribbon cable is very very easy to break
first off you have to take apart the phone completely
i would even take off the one board that the screen connects to
then you need to pry off the screen very carefully
if your amold or whatever part is broken you're going to have to peel it off
it really sucks and makes you look like a bad 70s disco
after that it gets pretty simple
make sure you have something to hold the top and bottom part to the phone
mine isnt flush due to me being a jackass and not getting the right glue stuff to hold it down
after that it should work perfect like before
if anyone wants to trade me a new screen for the i9000 screen or buy me a screen (lol) i would make a very detailed video (not happy with the way the first attempt turned out)
post itt or pm me if you have any questions
So you are saying it should work,but what about the software part,won't there be any problems?
Chrishas said:
So you are saying it should work,but what about the software part,won't there be any problems?
Click to expand...
Click to collapse
what are you talking about
thenotoriouspie said:
what are you talking about
Click to expand...
Click to collapse
about replacing a phone screen using a screen from another model,but of the same size,resolution
thenotoriouspie said:
3.balls. that ribbon cable is very very easy to break
Click to expand...
Click to collapse
and thats what I screwed up....what are my options now? Try again? dont think I can.
scrizz said:
FYI incase anyone else is looking for where to buy from.
http://www.globaldirectparts.com/Samsung-T959-LCD-Digitizer-p/smsng6085995.htm
Click to expand...
Click to collapse
did you see (Minimum order): 2
130448356330 check out this item on ebay
I really need help. I got my phone apart w/ the board for speaker and camera off and the front speaker off. I did not remove the haptic feedback motor yet. how the hell do you actually pry the screen off. i just don't see a way.
will the international galaxy s screen work for vibrant they hace same shape compared to captivate. And I9000s screen is cheaper than T959 screen (based on ebay price)

N7000 Replenishment Screen

Hello guys,
10 minutes ago my galaxy note N7000 screen cracked in my pocket.
So I need to buy a replenishment screen from Samsung but I simply can't find stores that supplies replenishment parts for it. Do anyone knows where to buy a new Amoled LCD screen for galaxy note ?
Thank you and best regards,
Amid
ebay, took 5 days to ship from HK to NYC. Follow youtube guide in opening the note and use blow dryer/heat gun to loosen the sceen, wedge open with something sharp and slowly tear back the screen gently. You will need the old Wacom sensor from the broken screen so becareful to not to rip it. There is guide in the general section. I broke mine 2 weeks ago and replaced it in a hour. take your time you can get it done.
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
amidsal said:
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
Click to expand...
Click to collapse
I think this is what you are looking for:
http://www.ebay.com/itm/S-Black-Dig...087?pt=LH_DefaultDomain_0&hash=item2c65951cd7
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
amidsal said:
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
Click to expand...
Click to collapse
Hmmm no, in that case you will need the 200ish one.
You will need the entire setup, glass, LCD, and Touch. Does not come with Wacom sensor. Looking around you can get them for 230-260. Look for delivery, that makes a huge difference, especially with your phone out of commission.
This is the guy I purchased mine from, but I panic and purchase the first one I saw. If you do some research you will find cheaper, but I got min in 5 days. So I am glad this guy came thru. Good luck, its going to stress you out a bit when you have to remove the screen from the front panel, they are glued on so take your time. Looks like your LCD broke so it is going to crack and shatter further so make sure you do it in area where it is easy to clean. If you look at the front panel after you remove it, you will see one wire that does not come with the replacement one, that is for the wacom sensor, so be careful and don't damage that part, you will need to peel it off and place it back on to the replacement lcd, otherwise your s-pen won't work. It's been 2 weeks, my phone is going strong and no sensor or sceen issues. You should get a more protective case, since you probably already blew close to ~$1000 on this phone by now. I have a casemate, otterbox commuter looks like a good one. Once again good luck, you can do this.
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Well mine looks brand new, must be the workmanship ;-P But why flame my advise when he is going to need to do it anyways, the screen is completely useless, as was mine. Why don't you keep your assumption to yourself in how it will look or if he is going to ruin the device. If he decides that he would rather live with a crack screen or someone who is willing to do it, there really isn't much options here. What's up with such negative attitude here. Just trying to show him that it can be done.
---------- Post added at 04:30 PM ---------- Previous post was at 04:26 PM ----------
jusutus said:
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Click to expand...
Click to collapse
Look at the delivery time. I got mine in 5 days. just talked to the seller.
Replacement screen with 2 connectors
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Leo.F said:
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Click to expand...
Click to collapse
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
s.magus said:
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
Click to expand...
Click to collapse
Thank you s.magus! I would love to go that route, but I'm in Venezuela, and Samsung is selling the GN, but does not yet have replacement parts. You're right, that will be the best way.
n7000 replenishment screen
hello jignesh here .... i hav note gt n7000 ... it working 100% normally ... just cracked screen or glass or lcd ... i dont know what is problem .... can u tell me what is the problem .... glass cracked or screen cracked or lcd cracked ???? how can i find problem ???? touch and everything is working perfectly as like new note .... i already using note since 1month ... but now i want to repair it ... so what can i do ??? just change the front glass or change lcd ??? please reply me ....
Where is the cheapest part in uk?
is there anyone in India who could tell the price of galaxy note's white screen touch (not the lcd screen).Thanks in advance....:good:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
SUPER NICE !!!!
After a search for 5 days ... This one is the best !!!
THNX baz77
your welcome, hope you fix yer stuff and be carefull electronics is delicate stuff
Sent from my GT-N7000 using Tapatalk 2
i disagree
Hi ,
I think Senior member Justis is right... many of us dont want to do a full screen replacement for 220$...when we can just remove the front screen for 20$..many have done this method successfully... U just need to watch a lot of youtube videos on this and be careful/delicate with the procedure... its possible.
So i dont think what he said was a waste.. Pls keep such remarks to yourself.. He was not wasting anyones time.
Infact you are wasting my time making me read your message and give u a reply.
You know what...im doing a screen replacement too... thats what guys do first. njot jump in and do a full replacement for 220 $.:good::good::good:
jusutus said:
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
Click to expand...
Click to collapse

Changing white housing cover to BLACK.

The question is: is it possible to change the full housing to black? I have a white SGS2 but it has scratches all over... Also that silver edge is pretty much damaged from falls.
I was browsing around and found out that there are full housings for sale, but what about the amoled screen if I want to change the phone color?
Thanks in advance!
Barretos said:
but what about the amoled screen if I want to change the phone color?
Click to expand...
Click to collapse
The screen is mounted to the frame (midsection of the casing, which is integrated with bezel) by a sticky tape -- ~1.5 mm wide all around the perimeter, and in some areas in the middle. When you buy a complete casing, it comes with the tape attached, so it's ready for you to mount the screen onto it. It will also show you where exactly the tape is located under the screen. The tricky part is do detach the screen from your old casing. Usually, it's done by heating it (carefully!) with a hot air gun, or even a hairdryer -- it will soften a glue layer and allow you to pry off the screen without cracking it. It's not that difficult, but if you are not comfortable doing it yourself, seek some help from an experienced person -- an electronics repair guy, or a seasoned DYI'er. However, keep in mind that sh*t happens, and there is still a chance to break the screen in the process, or fry it by overheating...
Thanks for the answer, kt-Froggy.
Can you give me a link to a trustworthy shop/casing?
Barretos said:
Can you give me a link to a trustworthy shop/casing?
Click to expand...
Click to collapse
I can only tell you where I bought mine... Not sure how trustworthy this source is, but it worked for me. I usually buy my stuff on Amazon. I searched for it, and ordered from this supplier (I was getting another item from them, so it was good to combine shipments). Delivered faster than promised, looked and worked as advertised, no problems with quality, so I was happy with it.
kt-Froggy said:
I can only tell you where I bought mine... Not sure how trustworthy this source is, but it worked for me. I usually buy my stuff on Amazon. I searched for it, and ordered from this supplier (I was getting another item from them, so it was good to combine shipments). Delivered faster than promised, looked and worked as advertised, no problems with quality, so I was happy with it.
Click to expand...
Click to collapse
Looks promising... There's something else I should add. I'm using Samsung's original extended 2000mAh battery, so I should also look for the extended back cover which is different from the original one.
Take a look at this: LINK

[q] lcd replacement procedure needed

Well, after a couple of weeks with my shiny new ZE551ML (RAM 2GB) purchased overseas in a trip, today the big bastard fell and cracked the glass .
So a new screen (complete screen, even if touch and LCD still works but don't want to mess with heat gun) is on the way via Aliexpress, I've done some similar procedures on more complicated phones but can't find any official procedure or documentation for this one, maybe too new?
So anyone has a PDF or webpage with the procedure?
Best I could find is this, but many pictures are missing
http://www.ewisetech.com/Pages/Product/teardown.aspx?s=1961&dt=6820&img=65699
EDIT: See post #6
http://www.myfixguide.com/manual/asus-zenfone-2-teardown/
Bout the best one available at the moment. Looks fairly simple to do, especially if you are replacing the entire screen assembly, not just the glass.
Sammaul said:
http://www.myfixguide.com/manual/asus-zenfone-2-teardown/
Bout the best one available at the moment. Looks fairly simple to do, especially if you are replacing the entire screen assembly, not just the glass.
Click to expand...
Click to collapse
Thanks, at least it's better than the one I found. But no specifics instructions on replacing the screen (separating the last housing from the old panel. Glue? Heat Gun? Double tape?)
gipikay said:
Thanks, at least it's better than the one I found. But no specifics instructions on replacing the screen (separating the last housing from the old panel. Glue? Heat Gun? Double tape?)
Click to expand...
Click to collapse
I do not know unfortunately. I would think it is tape, as most tend to be tape, but I couldn't say for certainty.
If you would like to set up an Out-of-Warranty RMA for ASUS to repair please send me a private message at [email protected].
Or you may apply for an RMA online at http://www.asus.com/us/support/
Please ensure to mention the damage otherwise it will be rejected if received with no reported damage.
Sincerely,
Frank
ASUS_USA
Here's an album I've used to replace my screen, (pictures are from the first link I've posted before) there are a couple of things to consider that aren't one these pictures nor any on the internet and don't make the sames mistakes I did. If you have pictures, and working screens from a different seller, please post it and I'll add it to the thread .
http://imgur.com/a/Rmy02
The tools I've used are screwdriver, a metal spudger, double-tape for cellphone repair, and a heat gun. And of course, your replacement screen. In my case I've purchased for 30 dol. on Aliexpress, but did not come with adhesive or tape so you have to have your own.
To remove the first section (4th picture), not only do you need to remove the cover and black and silver screws, but be careful because the center "rails" (the plastic parts to the sides of where the double sim and sd-card are) of the section are fixed to the battery section with "light" double tape, nothing too strong and can be lifted with care.
In the 5th picture, lift the white part of the connector and very carfeully to remove the ribbon. I've made the mistake to be too forceful and cracked the black part a litlle bit.
WARNING! THIS STEP IS THE MOST DIFFICULT, MANY PEOPLE BREAK THEIR BATTERY WHEN REMOVING, SO BE CAREFUL. AGAIN, YOU'VE BEEN WARNED
Now, one of the most difficult parts of the teardown is between 5th and 6th picture. After removing the uppers ribbon you have to take the battery compartment, and let me tell you that the white double-tape that glues the battery to the frame is one of the strongest i've ever encountered. A metal spudger can be helpful and you can start with pressing the left side, but don't separate too much or go too deep cause you might damage the envelope of the battery (I scrapped and exposed a litlle bit of the cells, but for the moment the phone works and don't heat. Just in case, I already ordered a new battery) . So be extra careful on this step.
In the 7th picture, things looks a little different of what I've found, the upper board has a metal protection that's soldered so DON'T TAKE IT OUT! Remove the upper left small ribbon very carefully. The cables on the down board that connects to the vibration motor are very fragile so be careful.
At this point, you can remove the speaker (I didn't) and you have the upper section, so the real hard work starts to be able to replace your screen. I'm sorry but i didn't take many pictures of this procedure, but again a metal spudger was helpful to be able to separate the cracked screen from the frame.
Remove all pieces of glue, glass or residue that's still on the frame and put the first part of the double-tape on the frame but don't take the upper part just yet. Take the replacement part and check it fits on the frame, paying atention to the two ribbons, one in the middle and other in the upper side. In my case, when I did put the screen I started with the upper ribbon and then guided the middle ribbon to it's hole and then fit the screen to the frame.
Make all the steps in backward order to be able to re-assemble the phone. The final optional step I did, is to seal the double-tape in the screen with the heat gun and some weight (I used a 2.5 drive and a couple of 3.5)
So in the end, I managed to replace the screen with only a couple of small mistakes. When my new battery arrives, the steps will be similar (I removed the white strong double tape with a light adhesive one, so it will be more easy to remove and replace the battery).
All in all, it went pretty well
LIST OF SELLERS WITH WORKING PARTS, according to users
AliExpress - Shenzhen OMG Trade co.,LTD - Screen For ZE551ML - USD 22.39 - gipikay (OP)
Nice to see someone succeeded, I laughted at the big hard drive lol Those 3.5'' HDs are huge. 30$ for the 5.5'' 1080p screen is pretty good, there are for 20$ too.
I tried once replacing an iphone 4 lcd but the problem ended up to be the motherboard.
btw Does anyone know where is the Intel GSM modem located on the motherboard? I see nothing from those pictures about the modem. I could not find a reliable way of disabling it, tried scripts, deleting dial etc apks and /lib/ril files, cellphone still searches for signal with no sim inserted and airplane mode on.
Back when I ordered, this one was the cheapest and the only one for ZE551ML (now the same vendor lists the screen as USD 25).
If I could guess, the modem should be in the upper board, under the metal shielding (the stock pictures indicates two visibles intel chips under the enclosure, maybe a third in the right, and one down in the board)
Thanks, so will it need to be unsoldered for removal? I only use voip and cannot use gsm anyway.
Experienced basically the exact the same when i changed my display essambly. I broke the foil around the battery too, only problem is I can not find any vendor selling a replacement battery. Can you give me a hint where to buy it?
Thanks in advance!
Gesendet von meinem ASUS_Z00AD mit Tapatalk
gipikay said:
Back when I ordered, this one was the cheapest and the only one for ZE551ML (now the same vendor lists the screen as USD 25).
If I could guess, the modem should be in the upper board, under the metal shielding (the stock pictures indicates two visibles intel chips under the enclosure, maybe a third in the right, and one down in the board)
Click to expand...
Click to collapse
Did you replace the glass only, or the entire screen assembly?
gettohhole said:
Experienced basically the exact the same when i changed my display essambly. I broke the foil around the battery too, only problem is I can not find any vendor selling a replacement battery. Can you give me a hint where to buy it?
Thanks in advance!
Gesendet von meinem ASUS_Z00AD mit Tapatalk
Click to expand...
Click to collapse
This is the one I've ordered, even if it says for ZE550ML (mine is 551) the part number and battery is the same (I think the difference between models is the screen resolution)
EDIT: I leave the link, but this seller sent me the wrong battery, see post #21. Now I'm waiting for AsusParts to ship me a new replacement
http://www.aliexpress.com/item/Free...ENT-BATTERY-C11P1424-3000MAH/32396187338.html
Sammaul said:
Did you replace the glass only, or the entire screen assembly?
Click to expand...
Click to collapse
Entire screen replaced, to separate the glass is really difficult
gipikay said:
This is the one I've ordered, even if it says for ZE550ML (mine is 551) the part number and battery is the same (I think the difference between models is the screen resolution)
http://www.aliexpress.com/item/Free...ENT-BATTERY-C11P1424-3000MAH/32396187338.html
Entire screen replaced, to separate the glass is really difficult
Click to expand...
Click to collapse
If you install 550 screen on 551 phone, it's possible you must install rom for 550 on 551, the big difference is the dpi.
I was just commenting on batteries. My phone is 551 and used a 551 replacement LCD, no differences there
Ok sorry just my bad english
gipikay said:
This is the one I've ordered, even if it says for ZE550ML (mine is 551) the part number and battery is the same (I think the difference between models is the screen resolution)
Entire screen replaced, to separate the glass is really difficult
Click to expand...
Click to collapse
gipikay said:
I was just commenting on batteries. My phone is 551 and used a 551 replacement LCD, no differences there
Click to expand...
Click to collapse
Did you test it already? Does work?
Sent from my ZE551ML
gettohhole said:
Did you test it already? Does work?
Sent from my ZE551ML
Click to expand...
Click to collapse
The new battery has not arrived yet
But a couple of scares aside ( if I completely drain the battery, it takes a litlle longer to reach minimal charge to power on ), the old battery seem to hold for the moment.
EDIT: See post #21, the sellers sent me the wrong battery, I think it's for Zenfone 5. Now I'm waiting for AsusParts to ship me a new replacement
Be careful
If anyone tries this, use extreme caution. I exposed some cells on the battery and a little smoke came out. I don't really know what to do from here because I'm afraid to continue this further. I guess I'm out of a 300 dollar phone and 30 dollar screen
Hi all
I ordered ZE551ML for my ZE550ML .... and the person already shipped so couldn't change the order
is it ok or i have to ship it back?
is it only PPI and resolution ?
Hi guys
Failed ... Got the 551ML and mounted on 550ML
Screen turns on but no Asus initial logo etc... Is not working
Mounted all out of the box... Not removing completely the broken screen.
Main board and battery connectors only.
You guys think anything can help ?

Screen replace?

So I just dropped my OP3 and now it has cracks all over the screen. Is it difficult to replace by myself and where can I get the new screen module? Asked few of the local phone stores but they don't have screens and couldn't tell when they would get them.
NoobMonkey said:
So I just dropped my OP3 and now it has cracks all over the screen. Is it difficult to replace by myself and where can I get the new screen module? Asked few of the local phone stores but they don't have screens and couldn't tell when they would get them.
Click to expand...
Click to collapse
I asked Oneplus the same thing and they told me that they don't sell the screen, so if you find one it is not genuine.
My repair was €104 and took 20 days
superiscch said:
I asked Oneplus the same thing and they told me that they don't sell the screen, so if you find one it is not genuine.
My repair was â?¬104 and took 20 days
Click to expand...
Click to collapse
Seems like I have to open ticket for oneplus and send my phone there
I broken my op3 and i buy screen, but its say genuine and its cost about 230dollars from US. Its not so hard to change. Op 3 its be my first phone which i change screen. You need some screwdrivers, some plastic plates and heat gun. For me is took 2hours for replace. But be careful with ear speaker, because when i finish its not working, and first think come to head, i put upside down D so i need resemble again hardest thing for me be to take out broken pieces, and take out back cover, because i wanted make everything without scartches. And now working like new Sorry for bad english. Screen and tools you can get from fixez.com
Zaikanas said:
I broken my op3 and i buy screen, but its say genuine and its cost about 230dollars from US. Its not so hard to change. Op 3 its be my first phone which i change screen. You need some screwdrivers, some plastic plates and heat gun. For me is took 2hours for replace. But be careful with ear speaker, because when i finish its not working, and first think come to head, i put upside down D so i need resemble again hardest thing for me be to take out broken pieces, and take out back cover, because i wanted make everything without scartches. And now working like new Sorry for bad english. Screen and tools you can get from fixez.com
Click to expand...
Click to collapse
Thnx for reply. The screens are out of stock. And also it says lcd-screen on their site. If I understood right the op3 has amoled screen, so it's not the same.
Sent my phone already to repair shop yesterday. Haven't got estimate cost and time yet.
Zaikanas said:
I broken my op3 and i buy screen, but its say genuine and its cost about 230dollars from US. Its not so hard to change. Op 3 its be my first phone which i change screen. You need some screwdrivers, some plastic plates and heat gun. For me is took 2hours for replace. But be careful with ear speaker, because when i finish its not working, and first think come to head, i put upside down D so i need resemble again hardest thing for me be to take out broken pieces, and take out back cover, because i wanted make everything without scartches. And now working like new Sorry for bad english. Screen and tools you can get from fixez.com
Click to expand...
Click to collapse
230$ for a screen?!
Mate, you got screwed over. Badly.
Sent from my OnePlus 3 using Tapatalk
I think you have to send the phone to OnePlus for repair. My screen was malfunctioning and they replaced it here in Germany for 1 week (with the shipping time) Pretty fast.
Latest info is "send to vendor service center 14.11.2016". In my opinion this is taking way too long.
Just for update. Just picked up my phone today. Replace screen was 140€ and I also got some kind of plastic cover for the phone. Probably not gonna use it, because I like naked phones but anyway nice to get something extra.
What about this one?
http://www.ebay.com/itm/232106828350#shpCntId
mohmd.nagy said:
What about this one?
http://www.ebay.com/itm/232106828350#shpCntId
Click to expand...
Click to collapse
It says unbranded and the price is approximately the same as the original one from OnePlus.
If I were you, I would go for the peace of getting it replaced by the manufacturer with OE part, despite the time taken.

Categories

Resources