Help I have a spv m500 on orange and i was sent the xdaunlocker software which seems to have worked at first but then it asked me for a service provider unlock code. I tried 0000 and 00000000 neither worked and then I was sent the prun program that just flashes a dos window on and of. What can I do or what is the code to use.
Related
Hello. I used the xdadev all unlock v1.6. not sure what happened. but I didn't get the code. Now it says Network is locked, Please input unlock code. I tried typing in 00000000 as the notes said but it isn't the right code. Please help I've just bought it and haven't even made a call yet
hi, you never said what phone you have but iv just had this exact same problem on my t-mobile mda compact.
in the end i think the problem seemed to be my connection to activesync via usb?
to get it unlocked you need to reset the phone (softreset will do) when it ask for your sim code just click cancel, then copy the said file version 1.6 to the mobile through activesync (usb), when its copied unplug the usb, then run the file. only run it once and wait until the confirmation pops up. then restart your device.
worked for me!
kevo
I need help badly to unlock my Blue Angel. After running the xda_allunlock 1.6_138, I got the following message and the device is waiting for me to type in valid code:
xdadev_all_unlock started
device=PH20B
key found
RIL ioctl 0xc2: 00000000
SIMlock answer:
invalid SIMlock answer
error getting current lock status
xdadev_all_unlock failed
RIL ioctl 0xc2: 00000000
RIL ioctl 0xc6: 00000000
Detail of my Blue Angel:
Orange M2000
Model: PH20B
R: 1.04.00
Orginal SIM card: Orange
Tried entering "00000000" but returned with a message "invalid code"
Deeply appreciate your advise and help, many thanks.
Hi teeshi,
I'm having the same problem as you. Did you ever find a solution?
Exacly the same for me.
Has anyone any ideas??
Guys
Are you sure your device is sim locked and you are not think of the ext rom and it being locked.
The toll has been around a long time and I have not read of any problems in this section before.
Success!!!
I followed the process outlined by c05m1c in post #694 on page 70 of the General Discussion > Upgrading, Modifying and Unlocking forum. This, I think was for a different phone but it worked nevertheless.
Here's the extract from the posting :-
"Finally after many combinations tried SPB Backup, copying v1.6_138 to storage, remove SIM & SD, hard reboot, copy v1.6_138 to norrmal memory, run, hard reboot, insert SIM, voila it worked, restored from SPB backup, it still works."
I used xBackup instead of SPB Backup.
Thanks to Itsme and c05m1c.
Now I need to try and get back the £20 I paid for a copy of your free software!!
Hi,
My spv m500 (orange) is currently locked. How do I unlock it?
I've tried the universal unlocker from this site but it didn't work.
Maybe I need a magician to unlock the magician
Any suggestions please?
Kind Regards
this tool
rename from text to exe file. Copy to device and execute it
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
thanx mate very good solution tested my self
REGARDS
GSM MIND
Thanks
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
I've tried it. And it works! Thanks a lot!!!
Thnx Mate !
Thnx alot
I appreciate it !!!!!
WBR.,
ALi
unlock m500
Thanks for the great site - I have unlocked an M500 bu when I place my O2 sim into m500 it accepts the pin but then posts 'network is locked - enter unlock code' - despite using unlock program previously - any ideas?
simon
Hello, i´m trying this tool, bud i get this Invalid or missing SIM card
any clues, I´m from Bolivia, South America.
Thanks a lot
i cant get this thing to work :S
help? spv m500 with missing or invalid sim error (its on orange, and i want it on t-mobile, and had it working a while ago, and then suddenly it didnt)
thanks -- ben
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
awesome man it works
thanx bro
Having lost my M3100................
the removing the sim card and restarting resolved the problem, kept trying like the other posts said.
fromdesert said:
rename from text to exe file. Copy to device and execute it
Click to expand...
Click to collapse
Thank you!
SPV Unlocking
hi guys, im a novice at this unlocking thing and i have followed the instructions to unlock th spv but trying to figure out where to put the unlock.exe file on the device to unlock it, pls help
I just got me a free M500 off a friend who no longer uses it so I am going to try this unlocker later today
I'll post back with what I did and if it worked or not
the tool at the start of this thread unlocked the SPV m500 in 1 minute
no problems at all
I placed a copy of the file in MY DOCUMENTS on the phone and used FILE EXPLORER to run it.
Now I need to work out why i can't see any of the contacts on the SIM card
Magician
I have a magician which was sim locked to T-Mobile.
Thanks to the tools offered, I was able to un-lock the phone and use it on O2 for 3 years.
I had a problem with the phone and had to re-install the ROM from the CD supplied by T-mobile. Upon doing so, the phone has locked itself to T-Mobile again and will not accept any other sim cards. I have tried O2, Vodafone and Orange.
The phone itself has now got Windows 6.1 by Cotulla, but as mentioned above, I can only use it on T-Mobile.
I have tried:
Lokiwiz (error message)
xdadev_all_unlock says the following:
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
could not find security key for device type HTC Magician
xdadev_all_unlock failed
xdaSimlock
xda2unlock-v2.2 (says "found all locks to be already unlocked!"
The device still won't allow me to use any other sim cards. T-Mobile will supply a code for £29.00 but it's not guaranteed to work.
I will be very grateful to anyone out there that can help please??
Kind Regards,
Jp
READ THIS http://[U]www.imei-check.co.uk/c3unlock.php[/U]
Step 1 - Enter Data for unlocking your HTC Artemis/Hero
HTC Artemis/Hero(T-Mobile MDA Compact3, SPV M650, XDA Orbit, Dopod P800, HTC P3300)
(removes SIM/NETWORK LOCK - use any provider, removes CID lock - flash any firmware)
A key file matching your IMEI will be send to the paypal account email address
DO NOT USE the IMEI from the BOX as it may be different from that of the phone.
IMEI:
.
Note that the unlocker work only under Windows 2000/XP/VISTA.
How To:
1. Save the UNL file received from us. Save the C3v2Unlock.zip to your computer and unzip it.
2. turn phone on and connect to pc (green ActiveSync icon in system tray)
WHAT THEY MEAN BY SAYING A KEY FILE FOR THE IMEI . JUST VISIT YOUR SUPPLIER SITE.
: I DO NOT HAVE A KEY FILE.....!!!!
ANY ONE CAN CONFIRM THAT CAN UNLOCK BLOCKED T-Mobile MDA Compact III....!!! ASAP
THANKS YOU IN ADVANCE.
Regards,
KINGBACK
Unlocking the phone will make a number of options available to you such as using a different network SIM card etc. If the phone has been blocked by the network (usually - but not allways due to theft or it being reported lost) - there is very little you can do with it - Mike
Experience available?
Hi there, is there anybody in Nederland who tried the mentioned www.imei-check.co.uk/c3unlock.php for a dutch T-mobile compact3 ?
I unlocked my German MDA Compact III With imei check some months ago and it worked perfectly. Now SIM Free and i installed the official german O2 WM6 Image without any trouble and without using USPL or anything like this.
you should always be able to install the official roms without using USPL. but then again, if your phone is SIM unlocked, it's also CID unlocked and doesnt need USPL anymore (at least that's how i understand it )
Hi Guys,
First off, sorry if this is old news for you guys!
I have tried a number of solutions found on here to unlock my Orange SPV M2000. I now have an o2 SIM and really need it working on the SPV as it’s my main work number
When doing the SIM unlock app from here, I copy to the SPV run it, then it says
xdadev_all_unlock started
device=PH20B
Key found
ril ioct 0xc2: 00000000
simlock answer
"Invalid SIM lock answer"
error getting current lock status
Can anyone point me in the right direction as to how I can unlock my SPV?