Develop Bugs

TomTom 3 on New Universal/Exec? Will it work?

Hi
Anyone any ideas as to whether tomtom3 which I have running happily on my 2i using 2003se will work when loaded onto the new o2 Exec using windows mobile 2005? Need to know before I decide to upgrade or stick with 2i........also any ideas if the port connector and the bottom of the 2i is different to the exec, again that changes the car kit connector too!! ahhhhhh!
Thanks all
Bryson

if you are out of luck finding people with both the universal and that tomtom thingy
i sugest you look if people with xda2i with 2005 and people with xda2 with 2005 can run it
if it run on those 2 2005 versions i would think it would run on the universal

No it doesn't work. I have Tom Tom 3 & 5 and neither of them will install.
It may have something to do with Activesync 4 which does things very different to versions 3.xx
I'd suggest waiting until Tom Tom annouce compatibility with WM 5 if I were you.

tom tom 5 works greaT
please check the other message boards for instructions on how install / workaround as4 by cab files. good luck with bt though.

Exec up and running with tomtom 5.1 and BT GPS..............wasnt easy! But running a treat, all we need now is a good car cradle!

bryson said:
Exec up and running with tomtom 5.1 and BT GPS..............wasnt easy! But running a treat, all we need now is a good car cradle!
Click to expand...
Click to collapse
hi can you email me a step by step guide ?
[email protected]

There is a thread that tells you all about it
Go to search and type Tomtom.
that's the way a forum works :wink:
You'll find it.

Re: There is a thread that tells you all about it
gpsenzo68 said:
Go to search and type Tomtom.
that's the way a forum works :wink:
You'll find it.
Click to expand...
Click to collapse
done that and could not find a how to thats why i asked for help.

http://forum.xda-developers.com/viewtopic.php?t=28386
That's the thread you want - had it as TT5 in the title

joebongo said:
http://forum.xda-developers.com/viewtopic.php?t=28386
That's the thread you want - had it as TT5 in the title
Click to expand...
Click to collapse
Thanks.

GPS and blue angel

Have a cingular 66 blue angel and inst. TomTom 5,now when I have to imput numbes or letters for tomtom the keyboard does not come up in the display,and does not show at bottom bar,
Why?
Thanks

Hi Trobor,
I experienced the same problem, and findout that u need to upgrade your TomTom Navigator to version 5.21. But remember that there is also problem with maps in that version (u need map plus version of maps) - that is what I find out on forums.
br
DeHa

blue gps
Thanks fo the help,i was thinking was only me,i think a can buy a pach that will fix the problem,i remember when you let know to upgrade,i will look for it let you know.
Thanks

gps
Upgraded to tt 5.21 did not fix it
Thanks

tomtom and other compatibility wm6

tomtom 6 working?
other apps problems?
thanks
fabri

Hi,
I've flash my trinity with last LVSW rom, all my applications till working on WM6....
No problem ;-)

thanks, any other test tomtom 6?
thanks, any other test tomtom 6?

TTN6 works perfectly on the Mun_rus ROM (and gets a fix from cold in under 2 minutes). Not tried the LVSW

NeilM said:
TTN6 works perfectly on the Mun_rus ROM (and gets a fix from cold in under 2 minutes). Not tried the LVSW
Click to expand...
Click to collapse
TOMTOM6 works perfect with LVSW Rom, GPS lock in 2 mins from cold start

could you please post your working tomtom 6 settings? I am having issues getting tomtom to find a GPS device!
Is the GPS port still com port 9? Is the baud rate still the same? Do we need to turn 'let windows manage my GPS settings off?
Have tried various combinations and still no luck
Thanks in advance,
WWWeed

hmmm, If I cant resolve this I going to have to downgrade back to WM5!
This is really annoying when I know other people HAVE it working..
Ahh well back to the shipped orange rom...........

In TomTom select "Built-in GPS receiver" it won't even ask you for a com port or baud rate.
This is only available in TomTom 6.03. If you have version 6.00 you need to select Other NMEA GPS receiver com port 9 and baud rate 4800 or 9600 (both worked for me)

Maybe: You must switch on phone part of mobile. When phone is off (Flight Mode) gps doesnt´ work.

Anyone have an upgrade for the p3600 to get WM6?
I've been searching the forum, but can't find what I'm looking for. Is it possible to upgrade the p3600 to a WM6 version?

Akselp3600 said:
I've been searching the forum, but can't find what I'm looking for. Is it possible to upgrade the p3600 to a WM6 version?
Click to expand...
Click to collapse
sure, read wiki http://wiki.xda-developers.com/

Akselp3600 said:
I've been searching the forum, but can't find what I'm looking for. Is it possible to upgrade the p3600 to a WM6 version?
Click to expand...
Click to collapse
dude, u totally out, forget wm6, u should flash a wm6.1 rom now.
try any one here, most of them are good.

sailer1983 said:
dude, u totally out, forget wm6, u should flash a wm6.1 rom now.
try any one here, most of them are good.
Click to expand...
Click to collapse
Just after I wrote the post I discovered the amazing wiki Found the AX3L wm6 rom. Works almost perfect. Do you know if there is anywhere to find a skin for the wm6 that works well?

[31.07.2009] TMC now working without external Hardware!!!

Hi,
Tmc work on Touch HD with a little tool (attached here).
TMC developers thread: http://forum.xda-developers.com/showthread.php?t=497977
beemers TMC thread: http://forum.xda-developers.com/showthread.php?t=512630
Load and install the two attached cab files, then:
start HyperGPS
select a free Com Port for TMC
go to menu > Test and search TMC with the arrows
message RTTMC in receive windows means TMC available (Pic 4)
if TMC found, close test windows with OK
leave HyperGPS in the background and start iGO
go to settings > TMC
search a TMC broadcaster
What is new in Beta 8:
-Full GNS protocol support. Tested under iGO and Navigon
GNS needs TMC+GPS option to be selected althought if it is not, HyperGPS will send fake GPS sentences.
-Less CPU consumption and lower memory footprint
-Optimized test program: Now RSSI is correctly shown under Royaltek mode, unused buttons are hidden under GNS mode and all the behaviour has been polished.
-RDS and TMC indicator in test program.
-Log mode redesigned to make more useful and readable logs.
-Removed fake RDS message under Royaltek mode. Not necessary with correct timmings.
-Soved an issue with block ratio not always sent.
my iGO settings in system.ini:
[tmc]
saved_config_available="0"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_last_tuning_mode="0"
auto_tuning="0"
saved_last_frequency="1047"
YouTube - TMC and iGO
Special thanks to beemerTPPC and all TMC developers.
with friendly greet
starbase64

You guys are incredible, and xda-dev is an amazing forum!!!!!!!
When, even iGO responsibles of the support section strictly answer that the HD isn't able to provide a TMC function with its radio receiver, you still believe that it's possible, give yourselves the means to make it happen, and success!!!!
BRAVO!!!
...'ll test this soon

it doesnt work on my hd....
tested all the com ports but no way.... it says it cannot open com port....
I have installed both the files, any help ???
Mau

TMC found in iGo, but no TMC-stations can be found in Sweden so far...

Does this work in the UK with iGO8? Reason why i ask that TMC is found in iGO8 but no TMC stations found. I have the headset plugged in and it's scanned all FM radio frequencies (testing.... no TMC signal found). The funny thing is, on the main screen where the TMC icon is, i have a yellow envelope. Clicking the car icon, then the car icon in a triangle, it takes me to a section called "Traffic Alerts" where 2 events are listed for roadworks. (1. A3211 westminster bridge - tower bridge & 2. A23 thorton - heath purley). So it must have picked up a signal at some point. Any help please ?

starbase64,
thanks a lot. I just follow in last two weeks all efforts (thanks to flywhc and other team) to obtain TMC function avalaible on htc devices. In my case I have a touch HD. Now I just installed u sw, and config and TMC signal is OK. Now remain only to test on the road...
Thanks again. I hope to give u feedback asap.

It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.

WOW! This is so good. HTC dvices always have hidden options. The only bad thing is missing tmc services in my coutry, macedonia

Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
Same problem here, worked once, and then after softreset cannot open com port anymore.

I know,gutted or what.
I'm just pondering a hard reset,would rather not but i really want this working.
EDIT: I might wait a while till my next Dutty rom,will probably be soon,lol.

Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
same here aswell using dutty`s v3.3XT

Gotta be realistic, while its nice to have, this is "only" OpenTMC, in Germany known to be around 20-40 minutes behind real traffic situation. This is not TMCPro with realtime traffic data through road sensors.
But indeed it is fantastic for the masterminds behind this activation to have achieved this. Respect.
OpenTMC around the world: http://en.wikipedia.org/wiki/Traffic_Message_Channel#TMC_services_in_operation

stokesie said:
same here aswell using dutty`s v3.3XT
Click to expand...
Click to collapse
Same here, using dutty's 3.3. I downloaded the setup files from here http://forum.xda-developers.com/showthread.php?p=3730090#post3730090 (page 35) and reinstalled and all working again.
Also, anyone know what frequency UK TMC is broadcast on?

works on htc diamond?

Originally Posted by Griff1 View Post:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission"
Same problem here, worked once, and then after softreset cannot open com port anymore.

IO ME MEDESIMO said:
works on htc diamond?
Click to expand...
Click to collapse
Yes, it does.

works nice with my blackstone and tmc is found here in NRW.
but
after close/restart it still works due to the driver is still loaded but as soon as its beeing unloaded for the first time I get the same error that driver cannot be loaded again - check COM port or install certs. even after softreset and reinstalling certs it doesnt work until i replace gfmapi.dll in \windows

usrname said:
it doesnt work until i replace gfmapi.dll in \windows
Click to expand...
Click to collapse
Thats what i'm finding too.

Does it work in netherlands

Have you read the messages in this thread? Hint: Post 12

Nav'n'Go iGo8 - Any israelis? help please =D

Sup,
My iGO8 wont recognize my location fgs..
It keeps making my routes from jerusalem - Jeremiah.. and not from my current location
HOW the crap do I fix this =D
thanks in advance.
Yuval lavie

HiHo,
when you have GPS Connection it change automatic to your position...
there is a function to add your favorite startpoint...
greetz

Hi Yuval,
Is your GPS receiver connected in iGo?
Go to "הגדרות" > "GPS" and verify that at the top it says "מחובר GPS מקלט ה"

Hey rbroudo..
It doesnt say Maklet ha GPS mehubar.
but it still cant position me.. its really weird meh =|..
Do you have MSN or something we can talk easier ?
if so please add me at [email protected]
thanks =d

igo8 israel not working on htc touch pro2
it worked on touch pro probably needs mod. but i rather just get a download and install does anyone have a link? i am running windows 6.5 thanks
[email protected]
have a great day guys thanks

Time warp!
You kick started a 4 year old thread.