I made this topic to show you a good colored theme which looks realy nice with black trinity.
I use a WA3 theme along with a tsk and Slither's cube skinned by me.
You can get the theme from here:
http://www.lakeridgesoftware.com/forum/showthread.php?t=12175
I use this loading animation:
http://www.lakeridgesoftware.com/forum/showthread.php?t=12440
You can get Slither's cube from here:
http://forum.xda-developers.com/showthread.php?t=358102
You can get my skin for the cube above from:
http://forum.xda-developers.com/showpost.php?p=1840200&postcount=401
Personally I prefer the sliding version of the cube(which isnt a cube ).
i'll attach some screenies:
Fair theme, but as I install it?
Have just installed Max theme creator and works a treat on Touch-IT v9.
Simple to use theme creator and changer with loads of options in all aspects of TF3D from clocks to slider degrees of transparency packs and personalised text.
now to find the time to go through all the options
Well done Maxycy!!
http://forum.xda-developers.com/showthread.php?t=493011
TF3D2
Hey there.. could you post a link to D'load TF3D2 for Xperia X1.. i tried looking everywhere but was unable to find it..
Hello, I just installed this theme:
http://www.ibrythill.com/win.-mobile/windows-mobile-65-wm7-titanium-project.html
But home screen looks too extrange (font look oversized and it looks like if it was intented for portrait screens rather than landscape). I had 3VO ROM with a Titanium theme (don't know what version) which looks great.
Theme says it supports QVGA (which I think is Excalibur's display resolution) but it does not seem so.
Any tips on how to reduce font size to use the WM 7 theme or should I flash again to recover my good looking Titanium theme in 3VO room?
Thanks for reading.
vlad88sv said:
Hello, I just installed this theme:
http://www.ibrythill.com/win.-mobile/windows-mobile-65-wm7-titanium-project.html
But home screen looks too extrange (font look oversized and it looks like if it was intented for portrait screens rather than landscape). I had 3VO ROM with a Titanium theme (don't know what version) which looks great.
Theme says it supports QVGA (which I think is Excalibur's display resolution) but it does not seem so.
Any tips on how to reduce font size to use the WM 7 theme or should I flash again to recover my good looking Titanium theme in 3VO room?
Thanks for reading.
Click to expand...
Click to collapse
The reason why it does not look right is because, the qvga resolution for the dash is 320x240 landscape and this is 240x320 portrait. If I'm correct this for the titanium on the 6.5 professional for ppc, and 3VO for dash is 6.5 standard for smartphone.
Thank you, I will look for titanium theme for smartphones with landscape QGVA resolution.
At the moment I could only find this thread in Google by searching with the terms "Titanium theme smartphone" and this other thread:
http://forum.xda-developers.com/showthread.php?t=506519
I'll try the restore package as now if I uninstall the WM 7 Theme it deletes 3VO Beveled Bars & Transparent Wallpapers.
[UPDATED TO v0.3 --> see the end of this post]
(solved all issues - THX rat_2665)
Hi people!
I've searched here in XDA the possibility to have the clock array using the excellent Co0kie's HomeTab but I haven't found nothing really running good. So I've tried to do by myself...
With this little MOD I've added the possibility to have the clock array layout in the Manila Home page while conserving all the same behaviors of the excellent Co0kie HomeTab v1.6.1
Tapping on the Manila Home left high corner, you will can choose among 3 types of clock:
____
___________
___________
_
_Digital (Flip Standard)______ ___.Analog_______ _____Digital + Analog
This cab will install also a standard transparent clock (hands complete).
I HAVE TESTED IT USING MANILA v2.5.20121225 BUT....
as reported from many respectable and careful users it seems to run right also with other Manila 2.5 (Sense) versions.
I guess that this my little MOD runs without problems in any Manila version supported by the original Co0kie HomeTab v1.6.1
The cab will write (overwriting) these files into \Windows folder:
▪ 7c60907d_manila (array)
▪ 4ea96fc8_manila (analog clock graphics)
▪ 7ccc5896_manila (time seconds analog hands graphics)
▪ 385cae35_manila (time minutes analog hands graphics)
▪ 44160f47_manila (time hours analog hands graphics)
▪ 6ec49541_manila (analog clock central dot point graphics)
After having installed this mod, you will can install any other analog clock you want (search here in XDA please),
but you will have to pay attention for the hours hand. In fact any new analog clock for Manila 2.5 will install surely these files:
▪ 4ea96fc8_manila
▪ 7ccc5896_manila
▪ 385cae35_manila
▪ 6ec49541_manila
but often not the other needed for the hours hand.
So to install other analog clocks proceed in this way:
♦ install the analog clock you desire to have
♦ in \windows duplicate file 7ccc5896_manila and rename it in 44160f47_manila to have the hours hand and all the clock parts running right and in the same style.
NiceOne
fAZernERo 23.03.2010
----------------------------------------------------------------------------------------------------
EDIT 2010.04.11 - fN Clock Array MOD v0.3 (THX to rat_2665)
Installing the MOD v0.3 solves definitively the weather background issue size and the oval analog clock distortion
The previous releases had two little but annoying bugs:
1) the weather background was not so perfectly sized to include all the text (only v0.1)
2) the graphic shape of the analog clock was a little oval (v0.1 & v0.2)
..and these were the results..
Many users have reported these annoying issues from the beginning, but I was not able to find a valid solution (sincerely in this last period I was too much engaged to edit and analyze all those lines in the Manila LibraryManager)..
Luckily the GREAT user rat_2665 (see THIS and THIS posts) has found a definitive solution for both issues
SO ALL THE THANKS ARE FOR rat_2665!!
..and these are the results.. (!THX again to rat_2665!)
Instructions:
a) Uninstall MOD v0.1 or v0.2 (if previously installed)
b) Reboot device
c) Install MOD v0.3
d) Reboot device
e) ENJOY
P.S.: the changed files and the analog clocks hours hand behavior are the same of MOD v0.1
NiceOne
fAZernERo 11.04.2010
works great, but the analog clock seems oval shaped? looks like its been badly resized, not so crisp clear...just my comments.
kieboy said:
works great, but the analog clock seems oval shaped? looks like its been badly resized, not so crisp clear...just my comments.
Click to expand...
Click to collapse
Hi kieboy!
Graphically speaking i haven't change nothing.. here @ XDA there are many analog clocks for Manila 2.5 so you can try with others type
Please read the instructions for the hand hours at the end of my post
Regards and THX for trying
fAZernERo said:
Hi kieboy!
Graphically speaking i haven't change nothing.. here @ XDA there are many analog clocks for Manila 2.5 so you can try with others type
Please read the instructions for the hand hours at the end of my post
Regards and THX for trying
Click to expand...
Click to collapse
Now that I've checked the graphics and tested other skins, you're right its actually ok, but somehow it's getting resized when applied.
Edit: Changed the clock skin, a bit better now. Still oval shaped though...I'm still going to use this 'coz it light. Good work faZ
THANKs fAZernERo
GREAT
works for me in Sense 2.5.19202525.0
webpatrick said:
works for me in Sense 2.5.19202525.0
Click to expand...
Click to collapse
THX for your post: it would be usefull to know for people using your same Manila version!!
As i said in the 1st post.. I've tested only using Manila 2.5.20121225 so I can't know if there are some kinds of incompatibilities with graphics in the clocks..
Regards
Thanks for your work!! I guess you're italian like me...i noticed that by the signature... I will include your mod in my ROM if you don't mind... nice work!!
Grazie mille!! Penso tu sia italiano...l ho capito dalla tua firma... cmq includerò il tuo fantastico mod nella mia ROM se la cosa non ti dispiace... bel lavoro!!
Kenia1234 said:
Thanks for your work!! I guess you're italian like me...i noticed that by the signature... I will include your mod in my ROM if you don't mind... nice work!!
Grazie mille!! Penso tu sia italiano...l ho capito dalla tua firma... cmq includerò il tuo fantastico mod nella mia ROM se la cosa non ti dispiace... bel lavoro!!
Click to expand...
Click to collapse
Hi Kenia: I will be honored if you include my MOD.. anyway all the merits are for Cookie Monster who made the great Cookie Home Tab (cool and fast!)
Bella Kenia: mi fa una cyfra piacere se la cucini nella tua prossima rom! Cmq onore a Cookie Monster per il suo Cookie Home Tab che fischia da payura - Batto il 5 e chiudo (pensi sempre che sono italiano?? ihihih)
kieboy said:
Now that I've checked the graphics and tested other skins, you're right its actually ok, but somehow it's getting resized when applied.
Edit: Changed the clock skin, a bit better now. Still oval shaped though...I'm still going to use this 'coz it light. Good work faZ
Click to expand...
Click to collapse
Could you have a cab for this clock cause it's nice...??
works great,it works for me in Sense 2.5.20121412.
peimak said:
works great,it works for me in Sense 2.5.20121412.
Click to expand...
Click to collapse
THX! It will be usefull to know for people using different Manila version!!
Thanks very nice
It's very nice. You did something amazing to my LEO
Thank you .
Aboyhtc said:
Could you have a cab for this clock cause it's nice...??
Click to expand...
Click to collapse
oh, ty! but I dont have a cab, i got clock from the net and just edited in Photoshop by myself.
If you want, I can give you the manila files for the clock and clock hands. Just overwrite the files in \windows folder using total commander after you have installed fAZernERo mod.
Don't forget to soft reset afterwards.
any chance to have the small digital flip clock, centered (without Analog), as in maxmanila? it would be great for me... (hornetgrigia )
There is a cab created by grzegorz10 for android clock without the transparency. It kind look more fanciful to me.
http://forum.xda-developers.com/attachment.php?attachmentid=281081&d=1266198841
Screen shot here: http://forum.xda-developers.com/showthread.php?t=630901
lukem said:
any chance to have the small digital flip clock, centered (without Analog), as in maxmanila? it would be great for me... (hornetgrigia )
Click to expand...
Click to collapse
Hi lukem!
It would be great.. but I think it depends from future developments released by Cookie Monster.. THIS WOULD BE ONLY A MOD and not an alternative for the excellent CHT!!
Regards
thank you, I thought you did 90% of the job (I am asking for) by giving the chance of having the small flip clock along with analog.... the step to join my target should be very-very small..... should be a sort of algorithm or something similar, because, as far as I see also in Maxmanila, clock files are the same they are only "resized" in screen....
Hi fAZernERo,
one problem with your helpfull mod:
I use the 'leo evolution dusk theme V3.0' and your mod. With that the clock will be no longer updated if the phone is in standby. The clock is working only if i go to the clocks settings and change one hour forward and then backward and then set the new (old) value. Then the clock is actual again.
You have some ideas what's happend here? Which is the file do you have changed for the clock grafics switch? With this information i can use the original dusk file to do more tests.
Or you have an another idea about that issue...