need help. ppc 6600 (sprint) activation. - MDA III, XDA III, PDA2k, 9090 General

Please help me activate cell PPC 6600.
I have problem with PDA screen.
I already activated device in Sprint customer service. Now I must enter code "##xxxxxx#myphonenumber#myphonenumber#"
What I must push step-by-step on my pad after Power Button?
If my phone (aaa)bbb-cccc When It must looks like:
Power on -> Talk -> ##xxxxxx# -> 1up -> Action -> Tab -> Del 3 times -> aaa -> Tab -> Del 3 times -> bbb -> Tab -> Del 4 times -> cccc -> Tab -> aaabbbcccc -> Tab -> Action -> OK
But there some mistake.

Related

Getting Communications Manager Shortcut

On my ATT Tilt 2, under start-> Settings -> Personal -> Buttons I do not have the option to set the call button nor PTT button to the communications manager. Is there any way this can be re-enabled on the Tilt 2 rom via a registry change or program?
I figured it out!
You need to go to file explorer -> Windows -> CommManager... (its 33B)
Copy this file and then go to File explorer -> Windows -> Start Menu -> Programs -> and paste it here.
It should then show up when you press the start button at the bottom.
After this you can go to Start-> Settings -> Personal -> Buttons and change it to Comm Manager!
csmeance said:
I figured it out!
You need to go to file explorer -> Windows -> CommManager... (its 33B)
Copy this file and then go to File explorer -> Windows -> Start Menu -> Programs -> and paste it here.
It should then show up when you press the start button at the bottom.
After this you can go to Start-> Settings -> Personal -> Buttons and change it to Comm Manager!
Click to expand...
Click to collapse
hi! u think that i can do the same with screenlock?

HOWTO: Switch to native ICS launcher

I haven't seen this mentioned anywhere, so here:
Settings -> Applications -> All tab -> TwLauncher -> Clear defaults
Now press the home button on your phone and choose "Launcher"
Tested on stock FB17
oleh211 said:
I haven't seen this mentioned anywhere, so here:
Settings -> Applications -> All tab -> TwLauncher -> Clear defaults
Now press the home button on your phone and choose "Launcher"
Tested on stock FB17
Click to expand...
Click to collapse
its easier if you just use sprint id to switch between launcher..
my second thanks "oleh211" didnt know that, just finished flashing FB17 nad this made it even better..

[Q] Reversing the JB unlock trick

I want to reverse the JB Unlock trick, and I need help.
So in theory...
Step 1: On your Galaxy S3, launch the phone app and press these keys:
*#197328640#
Step 2: From the Main Menu, navigate to [1] UMTS > [1]Debug Screen > [8] Phone Control > [6] Network Lock > Options.
Step 3: In the Options screen, choose [3] Perso SHA256 OFF. Wait for 30 seconds after making this selection.
Step 4: Go back one step by pressing the menu key, and then back once. You should now again be in [6] Network Lock
Step 5: Here, now choose [4]NW Lock NV Data INITIALLIZ. Wait for one minute after making the choice.
Step 6: After a minute has passed, reboot your Galaxy S3.
in these instructions, Step 3: In the Options screen, choose [3] Perso SHA256 OFF. Wait for 30 seconds after making this selection.
technically I would just have to change this to ON and then repeat the other steps, am i correct?

[Q] Help! Unlock Bell Mobility Note 2 - Canada version

Hi everyone,
I need assistance with unlocking my Bell Mobility Note 2 on Android 4.1.2. I searched all over for a solution and have been seeing many duplication of the same solution which didn't work for me. That being said, I tried this:
"Dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone"
This option [4] NW Lock NV Data INITIALLIZ - never came up on my phone, and only Options [3]Perso SHA256 OFF after waiting for 30 seconds.
Any other alternatives? Any assistance is appreciated!!!
This is the only free solution i think which is the same as you posted
http://forum.xda-developers.com/showthread.php?t=2014982

[Q] how to unlcok samsung note 2

Hi guys, I got my new samsung galaxy note 2 v 4.1.2..i tried to unlock it using this step:
Step 1: On the Samsung Galaxy Note 2, launch the phone app and dial the following keys:
*#197328640#
Step 2: From the Main Menu, navigate to [1] UMTS > [1]Debug Screen > [8] Phone Control > [6] Network Lock > Options.
Step 3: In the Options screen, choose [3] Perso SHA256 OFF. After choosing this option, wait for 30 seconds.
Step 4: Now go back one step by pressing the Menu button and then select Back once. You should now be in [6] Network Lock.
Step 5: Choose [4]NW Lock NV Data INITIALLIZ. After that, wait for a minute.
Step 6: After a minute, reboot your Galaxy Note 2.
but i failed...1st reason i cant find the UMTS, 2nd in the network lock there's no option..
PLEASE HELP ME....
http://forum.xda-developers.com/showpost.php?p=31801134&postcount=4
try tool 14B

Categories

Resources