Related
Hey guys. i was wondering if there is a magnetic case for the EVO that would allow me to stick it to my Motorcycle gas tank. that way i can see incoming calls/texts and decide if it's important enough to pull over and deal with.
if anyone has any suggestions, even DIY's i'd love to hear 'em! thanks
Lots of tank bags with clear windows would be your best bet.http://www.newenough.com/parts/luggage/tank_bags/
What I am interested in is a solid handlebar mount that would let me video my ride.
you don't think that shock would be a problem? bouncing over bad roads, potholes, speed bumps, normal riding vibration would be a problem? also, i have yet to see a good bike solution that would secure the phone well enough. my fear has always been it would vibrate loose from it's enclosure and fall out during a ride. that would SUCK!!
SilverStone641 said:
you don't think that shock would be a problem? bouncing over bad roads, potholes, speed bumps, normal riding vibration would be a problem? also, i have yet to see a good bike solution that would secure the phone well enough. my fear has always been it would vibrate loose from it's enclosure and fall out during a ride. that would SUCK!!
Click to expand...
Click to collapse
I'm with you on that. With some rubber or foam to dampen vibration, and a solid stand, I don't see how this is out of reach.
One would have to wonder what the effect would be on a phone with a powerful magnetic field right next to it. It may mess up stuff like the compass, the GPS, and the accelerometer. If powerful enough even the battery. I would be careful.
kf2mq said:
One would have to wonder what the effect would be on a phone with a powerful magnetic field right next to it. It may mess up stuff like the compass, the GPS, and the accelerometer. If powerful enough even the battery. I would be careful.
Click to expand...
Click to collapse
Changing magnetic fields are what mess up electronics so the magnet there stationary *should be OK*. Here's an option - a rare earth magnet inserted into the Seidio 3500 mAh battery back - i.e. use a standard battery and put it into the case for the extended battery. Then put the phone in the extended Innocase and it'll all be held together. Throw some felt on the back to protect your tank and away you go.
* I am not responsible for any damage to your phone.
EDIT
And for power you can use an SAE (i.e. Batterytender) to 12V socket adapter from Powerlet here.
I just bought a bike and have been thinking about this too.
I don't want to mount my phone for the stated reasons, vibration and risk of losing it. But have you seen this Sony LiveView?
http://www.engadget.com/2010/09/28/sony-ericsson-liveview-acts-as-a-1-3-inch-remote-control-for-you/
I'd love to get one of those and stick it to the gas tank!
Wow! i hadn't seen that(and i frequent engadget) good find! any word on pricing?
i had another thought the other day. what about using a football playbook wristband? i dunno if it's even feasible but i figured id run by the local sporting goods and give it a shot
phobos512 said:
Changing magnetic fields are what mess up electronics so the magnet there stationary *should be OK*. Here's an option - a rare earth magnet inserted into the Seidio 3500 mAh battery back - i.e. use a standard battery and put it into the case for the extended battery. Then put the phone in the extended Innocase and it'll all be held together. Throw some felt on the back to protect your tank and away you go.
* I am not responsible for any damage to your phone.
Click to expand...
Click to collapse
I have a couple small rare earth magnets in my battery cover. The only drawback is the compass and metal detector functions are unavailable (no loss to me). Personally, I would worry more about my tank scratching than anything. The tank bag with clear cover is likely your best bet.
Personally, I ride to ride...not to look at my phone. Be safe.
* I am also not responsible for any damage to your phone.
SilverStone641 said:
Wow! i hadn't seen that(and i frequent engadget) good find! any word on pricing?
i had another thought the other day. what about using a football playbook wristband? i dunno if it's even feasible but i figured id run by the local sporting goods and give it a shot
Click to expand...
Click to collapse
I fee like a wristband would be more of a pain than it's worth. Of course I also listen to music from my phone on a bluetooth helment, and woud like an easy way to skip tracks. With the phone on your wrist, you obviously won't be able to interact with it at all.
I haven't seen any pricing info, and "final quarter this year" is all I've heard on release date. But hey, we are now in that final quarter
no offense but when your riding i really really hope you arent interacting with your phone anyway. People seem to have death wishes now a day.
I had a handlebar mount for my droid incredible for one main use
gps maps/directions
It worked great on with phone mounted right in front of you there is no worry about taking eyes off road, you still see whats going on in front of you while glancing at maps, in fact easier and safer than changing you car radio etc!
it was also nice if a call came in while on a long ride on great roads here in tennessee, i would see it ringing and just pull over to answer/call back
makes it very handy while out riding for the day
Just read this- I can't find it anywhere online yet, but it might be available in store at T-mo.
Link:
http://www.tmonews.com/2010/12/the-mytouch4g-dock-has-arrived/
EDIT: Changed title so as not to get anybodies hopes up.
(OPINION- UNDERWHELMING)
Its does NOT use the dock pins. It uses the microusb port thus does not launch the dock app. Just FYI before we get 10,000 "does it use the pins?" questions. Source.
FYI, there are links in the tmo forum that I linked where you can purchase it but EVERYWHERE is sold out already.
EDIT: Fixed source.
Awesome, thanks for the info...and the save! Lol
Sent from mytouch 4G using Tapatalk
I guess if they did have the pins, it wouldn't be able to rotate the device into the upright position. This would be more secure. When I had the N1 dock, one little nudge and the device would fall to the floor
@Kid Poker, man that's crap,o don't know if it would be practical, buy it would be nice if they make the mt4g dock in a way that it would use the micro usb and the pins, so it would stay in place better than just sitting on a few contacts.
Sent from mytouch 4G using Tapatalk
Sorry I don't have pics, but had some hands on time with the dock. It does use the usb connector and swivels, and has bluetooth. $50 in a T-Mobile store, but buy 2 $3.99 straps with it and you get 30% off. It is a snug fit. I imagine a body skin will still fit, but no case will work with it.
kitsunisan said:
Sorry I don't have pics, but had some hands on time with the dock. It does use the usb connector and swivels, and has bluetooth. $50 in a T-Mobile store, but buy 2 $3.99 straps with it and you get 30% off. It is a snug fit. I imagine a body skin will still fit, but no case will work with it.
Click to expand...
Click to collapse
lol Oh tmobile, I will never understand your pricing structure- but it's awesome! As far as a snug fit- thats what I kinda figured, I bought a Zagg full skin and a SS realook for the display (a little excessive I know- but hey that 50% off black friday deal from Zagg was awesome) instead of a case, so I could use the docks when they come out. Appreciate the info... but, do you work for t-mo, how did you manage to get access to the dock already???
Why would the dock not use the pins? Can we assume other docks will come out in the future that do use them?
mountainboy said:
Appreciate the info... but, do you work for t-mo, how did you manage to get access to the dock already???
Click to expand...
Click to collapse
Just walked in the store, the downtown Minneapolis store has two of them. If I had been able to split it up on my bill I would have gotten it, but my credit is burned up with the MT4G. I'll have cash on me tomorrow, I'll pick one up and play with it for a while if they're still in stock. I'll post some pics tomorrow night.
wow $50 for a dock that uses the micro usb port, i wonder if you could do better with ebay knock offs. I'm sure you can probably not as nice but it'll cost 1/5th of the price.
What is the point of having a dock like this that DOESN'T utilize the pins on the phone? That doesn't make much sense at all to me.
You missed the "bluetooth" part, I see. Still, should be at least $10 cheaper imo.
kitsunisan said:
Just walked in the store, the downtown Minneapolis store has two of them. If I had been able to split it up on my bill I would have gotten it, but my credit is burned up with the MT4G. I'll have cash on me tomorrow, I'll pick one up and play with it for a while if they're still in stock. I'll post some pics tomorrow night.
Click to expand...
Click to collapse
Cool, I'll keep an eye out. The pics make it look a little top heavy with the phone in it- I wonder how it balances out- wonder if the base is weighted...
greenstuffs said:
wow $50 for a dock that uses the micro usb port, i wonder if you could do better with ebay knock offs. I'm sure you can probably not as nice but it'll cost 1/5th of the price.
Click to expand...
Click to collapse
Yeah $50 is steep- the other links are showing $38 though- that seems more of a fair price if it's a legit product. I'm thinking I would buy this for use in my office, and wait for the one that makes use of the contacts to use at home.
I'm using it right now. Got it at T-Mo retail. It looks like every store only got two in-stock for some reason? I guess I could take pics, but it would be with my crappy old iPhone 2G camera, which would be really low-res and pointless. :/
So, the quick-n-dirty 'review', for those of you who are as nerdy as me:
Synapsis: Don't bother!
myTouch 4G Swivel Dock
Pros:
Nice, weighted base (where the BT antenna is housed, along with micro USB intput and 3.5mm audio out). It is definitely weighted and nice feeling.
Looks fairly sleek, despite the cheesy 'my' logo on the front of the dock.
Bottom of the 'weight' is rubberized, so it doesn't slide around.
The back of the swivel stand has the same, soft, rubberized material so the back of the phone does not scratch on the plastic.
It serves the purpose of securely (emphasis on this) docking your device. That thing isn't coming out without some force.
No Bluetooth PIN is required to pair (simply pair in BT settings).
Allows you to charge and sync over USB (think 'iPod / iPhone dock')
Streams audio from the phone to the dock, via BT.
Cons:
Does not come with an extra USB cable.
No solution to use the FM Radio without just dangling your headset off of the side (in fact, the 3.5mm from the phone is blocked by the cradle). So, so, so, very lame. I realize I could just buy a cheap FM Alarm Clock, but what's the point of having all of this cool tech in my phone if there's no practical way to use it? Wasted opportunity, if you ask me.
Getting the phone in there at first, you feel like it might be really easy to damage the USB port.
A small amount of 'rattle' to the swivel mechanism, but otherwise, sturdy.
It is somewhat difficult and awkward to seat the device into the dock; this is a really snug fit.
BT audio kind of sucks biggity balls. Highs crack and there is a general layer of compression running through everything. Basically, there's no point in playing files that are encoded at anything above 64KBPS. Listening to music on high-end speakers kind of sounds like ass. So, yeah. Not sure why they didn't just route the audio through the USB port, iPhone-style? It's not terrible, but if you're an audiophile, you will cringe a little bit. Directly inputting to the phone sounds 200x better.
There doesn't appear to be a way to pair the dock with your computer, to try and re-route the audio stream (super nerdy stuff on my part).
T-Mo, in all their wisdom, left out support for landscape viewing throughout most of the OS. Really bone-headed and stupid (same complaint I have with using the phone as a GPS device -- sideways contacts / phone = stupid).
The docking pins are not used in any way, shape, or form (no automatic 'desk mode' / no automatic alarm clock). Lame. So lame. I'm so disappointed by this, because the docking pins were one of the main reasons I went with this phone (assuming super-fancy docks would be coming out).
The 3.5mm audio cables you plug in can very easily be unseated / pulled out from a bump. I don't know if this is because I'm using super-professional-grade cables that have a hefty weight / insulation to them? But if the cable applies any pressure to the dock's input, I get the infamous analog 'BUZZZZZZ!' sound. It's not cheap, I just think the cables are too heavy-duty.
The Dock wraps over the volume and lockscreen keys. Kinda dumb, but I understand why this has to be. I imagine the BT audio normalizes anyway.
They really should've thought out how to integrate their docks with the OS a bit more.
It's not terrible, but it's not mind-blowing. I got it for 20% off, and was able to use credit from a returned accessory. I got it for about $30, and I think that's probably a more reasonable price for what amounts to nothing more than a fancy USB port with lousy Audio Out capabilities. It's a solid and safe way to charge your phone at night, basically. I'll probably keep it, but it is a bit of a letdown, if you were expecting to drop your phone into it and have it automatically launch some kind of cool interface. I think they should've routed the 3.5mm stream from the USB input, and that they should've found a way to include an FM antenna into the device to make use of the super nice FM radio app. The fact that it doesn't automatically go into Desk Dock Mode is infinitely disappointing to me.
Basically, if your only other solution was to have it nervously balance on the edge of your table, sitting on your laptop, with your cat / dog or a child running around the house? This is a much better and safer solution.
If they just built landscape support into Sense, this would be pretty sweet. But I guess that's why they have it 'swivel', right? Lame.
Feel free to ask me any more questions, if you've got 'em.
@Jon C Wow, I'm impressed! Kudos man, I have a hard time typing out a whole paragraph. Excellent review! So, is the bluetooh in the cradle just for you to be able to plug in headphones at the base of the unit, or is there a built in speaker? I like their attention to detail with the rubberized parts you mentioned. So, with the phone being such a snug fit in the cradle via the micro usb- do you think that could cause any issues with the phone potentially being docked and undocked several times daily? I was pretty bummed when I noticed that the volume rocker is covered as while I'm @ work sitting at my desk, I like to put on Pandora with the ability to adjust the volume when I have to make phone calls. I'm thinking I will just continue using my business card holder for my phone stand- it seems to have more of the functionality I'm looking for lol.
@Jon C. Thanks for the write up! I really only want the dock to prolong the live of my micro usb port and for the auto clock function (I use it on my night stand) so I will NOT be purchasing this one. I really hope they come up with something else, total waiste to have the dock pins and not use them.
Man I miss my Nexus dock!
I updated the review a little bit. Not only does the dock block the volume keys, but it blocks the lock button and the 3.5mm out.
To answer your question: No, there is no speaker on the dock, simply a 3.5mm out.
Also, I need to stress how annoyingly difficult it is to actually seat the phone. The dock feels like it was engineered back when the phone was called the 'myTouch HD', and probably had slightly different dimensions (much like the gel cases, which do not fit exactly).
I really have to jam the phone hard against the back of the dock, to line up the USB port. I could easily see the USB port getting damaged from repeated 'misses'. The stupid little USB connector actually put a nice little dent into the side of my soft-touch paint.
Man, how the **** do you mess this up? What a letdown.
Sadly, guys, I don't think we're going to get anything better. That said, I'm really thinking about taking this thing back, based on how impossibly hard it is to even get the phone in there to begin with.
Jeez! Yeah I would take that thing back for sure. That really sucks that the stupid thing dented the side of your phone! They should give you something cool for free ;p...I'm just sayin...
Sent from mytouch 4G using Tapatalk
Normally, my OCD would require that I swap out my current phone for another one. However, with all of the bull**** with the variances in screen quality and so forth, I'd rather not push my luck. Plus, the reps at all of the T-Mo stores around here are kind of pushy / annoying and get angry when you want to swap out phones.
Still, I am pissed. Super lame, T-Mo and HTC. What the hell were you idiots thinking?
I hope a third-party makes a dock with pin support. Odds of that happening? Slim-to-none.
Yeah, I can understand the ocd thing lol! You do have a very sad but true point about a new hit or miss phone. Just to clarify though, who is the manufacturer of the dock- HTC or tmo? You would think that they would come out with some kind of dock to utilize those contacts on the side of the phone.
Sent from myTouch 4G using XDA app
As stated above, I'm looking for the best ANTI-VIBRATION car mount so I can use the E4GT as a dashcam during my daily commutes.
The "exomount universal car mount" seems to get a lot of praise:
http://www.amazon.com/MSW-Exogear-Exomount-Universal-Mount/dp/B004Z8ZLOS
What is everyone using?
Preferred criteria:
1) ANTI-VIBRATION PROPERTIES!
2) Excellent suction mounting on any surface (easily positionable anywhere and safe for all vehicle surfaces)
3) Not too bulky and thick.
4) Ball joint (or alternative) to allow for infinite positioning of phone
5) Camera lens port
ctbearz said:
Ultimate Dash Cam mount:
http://forum.xda-developers.com/showthread.php?p=22552353#post22552353
For the Ultimate Dashcam app the following criteria should be met:
1) Able to customize video length by size (_GB) before looping over to preserve memory space and have overall user control
2) Able to record in any and all quality modes the camera is capable of, including night-time recording mode
3) Able to record with the E4GT Screen OFF to reduce battery drain and reduce distraction to driver
4) Able to sync with GPS/google maps
5) BONUS: able to customize overlay including but not limited to- speed, gps location, time, temperature, SYNC with TORQUE APP overlays & data!?!? or maybe just able to natively receive OBD2 data transmission from a bluetooth OBD2 module.
Any apps come close to the above? What's the best Dash Cam app you guys are using?
Click to expand...
Click to collapse
why did you spam post this in two sections?
he probably came from the iphone and doesn't understand basic social protocol in forums...
I just bought the linked ExoMount and it arrived 2 days ago. So far I'm very satisfied with it, it keeps the phone stable, is a overall smaller mount than some of the other solutions. The spring loaded clip holds on to the Epic Touch securely. My only gripe is that I wish they made the mount with less plastic and more aluminum/metal. Overall the build quality is acceptable and the mount works great for what it was designed.
I recorded some video while mounted as a 'dash cam' and due to the position of the camera sensor you'll have to slide the phone to side while mounted, or find a mounting position that doesn't block any of the camera's view.
Previously I purchased a universal car mount by Arkon and it was bulkier, the suction cup didn't work nearly as well, and didn't secure my phone.. it would slip off after sharp turns..
Bear gri11z said:
why did you spam post this in two sections?
Click to expand...
Click to collapse
iamtheug said:
he probably came from the iphone and doesn't understand basic social protocol in forums...
Click to expand...
Click to collapse
Because if you actually read the two posts carefully, you will realize there exist two different subject matters: dash cam app & dash board mount
ker0zene said:
I just bought the linked ExoMount and it arrived 2 days ago. So far I'm very satisfied with it, it keeps the phone stable, is a overall smaller mount than some of the other solutions. The spring loaded clip holds on to the Epic Touch securely. My only gripe is that I wish they made the mount with less plastic and more aluminum/metal. Overall the build quality is acceptable and the mount works great for what it was designed.
I recorded some video while mounted as a 'dash cam' and due to the position of the camera sensor you'll have to slide the phone to side while mounted, or find a mounting position that doesn't block any of the camera's view.
Previously I purchased a universal car mount by Arkon and it was bulkier, the suction cup didn't work nearly as well, and didn't secure my phone.. it would slip off after sharp turns..
Click to expand...
Click to collapse
Thanks for the personal review!
Yes, I actually was considering the Arkon model as I randomly encountered it while on Amazon. I guess the plastic build makes it lighter? Hopefully, quality does not suffer as a result.
When you mounted it as a dash cam, did the video come out very shaky from the road vibrations or was it nice and smooth or at least bearable to be used as a dedicated dashcam mount?
ctbearz, totally off topic, is that a cat in your avatar, and do you have a larger pic of it? wife would totally love it.
https://www.youtube.com/watch?v=IgkJ9ESZMKg&feature=youtube_gdata_player
The quality is much higher, but the sound is ass. This is using the samsung mount, recorded 55 mins worth of high def. It killed battery...even though it was plugged in. I had a passenger so I had to set the base in the way. Top speed was 85, in the concrete dip it bottomed out.
This was on a closed road, and done by a professional driver...
Sent from my SPH-D710 using Tapatalk
Use either the stock windshield mount dock, or the Samsung Infuse one - see if the special is still going for $15. Either way, both have the hole cut out for the camera already for this reason.
If you've had windshield mounts that vibrated in the past, chances are they were mounted on a gooseneck or similar, that can be set into oscillation really easily. Neither the ET4G or Infuse windshield mount are like that, these are solid, adjustment made with a ball that tightens rigidly with a collar nut. That means these won't vibrate any more than your windshield itself.
And there is some vibration protection in that the suction cups are rubber/silicone. I suspect your past experiences are not vibration but oscillation though. Cars themselves don't vibrate, or shouldn't...
If your windshield is vibrating, that's bad news - could indicate your motor mounts are shot, they are supposed to isolate vibration (Google NVH).
If you mean eliminating jarring when you drive over potholes - that isn't something that even advanced camcorders with anti-shake can fully resolve, and it's done at the digital level, not built into your phone. Rubber mounts won't do anything for this, other than possibly increase oscillation - sort of like driving over a bump in a sports car, then riding over it in an old Cadillac - you feel the hit more in the sports car, but it stops instantly, where the old Cadillac absorbs more of the initial impact, but sets the suspension in oscillation, bouncing up, down, maybe up, down again, eventually settling down.
If you've got some sort of specialized application like a drag car with a V8 and solid motor mounts that you want to record your run down the strip, you'll need specialized equipment. Standard cars don't vibrate, so you'll be fine.
Also, the stock mounts come with a disk backed with double-sided tape, so you could adhere it to the dash and suction-cup mount to that disc as an alternative to the windshield.
It's also the standard four-square-post mount, you can clip off the actual phone dock from the suction cup mount, to adapt to another mount, or you could fabricate your own, and still have the solid phone mount. By far, the ET4G or Infuse factory dock will hold your phone most securely, and without allowing for oscillation, more so than one of those grab-your-phone-via-foam-pads that has some play and give even tightened up.
In regards to an ultimate dashcam APP, I think a good work around for the screen being on issue is an app called screen filter. It allows you to super dim your screen to variable levels, and disabling is as easy as touching the active notification in the drop down. So, you could lower your brightness all the way, then find the right level in screen filter to where it's barely visible (youll need to be able to see a LITTLE so you can disable it...or else pull your battery lol.). It does work while in the camera app, I've done it before.
Sent from my SPH-D710 using xda premium
Less vibrating mount than this one
I found this video on youtube ... (Link its not available) search for ExoMount Vibration Test on you tube
it have some moments where the movie vibrate a bit.
Does any one have informations about a better dash cam mount?
or this its the best one?
Thks
I took a lot of inspiration for these projects from some of the stuff I saw posted around here. Like many others, I got tired of the lack of accessories available for the GN and built a few of my own. I was also too impatient to order and wait for the pogo pins that I should have been using for this project, so I used guitar string instead. :silly: Oh well....
The Wooden Desk Dock
This one was fun and It didn't take too long to build. Thanks to chopper the dog for his info in this thread which I used as I was building this. To put this together I used:
a couple pieces of scrap wood for the body,
a paint stirrer cut to size for the platform,
some 46 gauge guitar string for the contacts,
solder,
electrical tape,
a strip of 1/8 inch foam (on the left side. hard to see in the pic) to seat the phone snugly,
a few felt pads for feet,
and, an NFC tag to trigger landscape mode for the phone and it has been working nice.
Ideally, I need to get this thing sanded down a little more, get the tag hidden a little better, and maybe stain or paint it.
The Modified Verizon Car Dock
I'm pretty happy with the way this one turned out, but I'm not finished yet. For this one I used:
an old Verizon car charger,
some 46 gauge guitar string for the contacts,
solder,
electrical tape,
two 1/4 inch pieces of spray tube from a can of WD-40 (I used these as guides for the guitar string to slide through),
some CA glue to hold the tube guides in place (We'll see long this lasts...)
a small bolt, nut, and teflon washer,
a short piece of black wire (I used this to secure the power cord to the dock. It was the smallest, nicest looking way of doing it short of using a twist tie, blegh.)
an NFC tag to trigger landscape mode for the phone,
and a Razer sticker to hide my mistake of shaving too much of the back of that Samsung plate away too fast and melting the front (dammit!)
As you can see, up close it's not the prettiest looking job, but with the phone snapped in it looks just fine. I was a huge pain getting those contacts just right, but eventually using those tubes made it much easier. I carved out a section of the soft rubber inside, because it left a mess when I initially drilled through it. It made it really hard to line the contacts up.
I'm going to work on this one a little more today. I want to add a connector to make it possible to break the cord away from the dock and possibly make another cord with a USB connection on the end.
Adding the Connector to the Modified Verizon Car Dock
This was easier than I expected. I started searching around for supplies and found a couple of old cordless handset bases with just what I wanted, some kind of 90 degree connector. I pulled the receptacle from the board inside the base. Since we had multiple bases, I was able to grab two nearly identical plugs.
Then I removed the fixed car charger from my dock and found a suitable place for the receptacle. I soldered the wires in place and fixed the receptacle in place with a zip tie.
I think the zip tie was the best way to go. It's a little tight under the samsung cover.
I used the plugs and spliced them onto to the verizon car charger and a regular usb cable. For anyone who's interested, the wires inside the verizon charger are red (5v) and green (ground).
After a little testing, I decided the receptacle needed another zip tie and a round of CA glue to hold it in place. Here's the finished product. I'm very happy with how it turned out.
I also have another problem I need to work out. I use my 12v socket in the car for my bluetooth receiver. I need to figure out a way to power both in a small compact way. I've seen those 12v socket splitters and I will not put something like that in my car. What do you guys think about trying to fit both of these into one package?
I had a lot of fun working on these over the couple days. Let me know what you guys think
Well done, I like the look of the chunky wood dock. Although like you said sanding it down would make it look better.
Thanks jonny. I'm thinking a dark stain on it would look nice. I want to replace the platform with something a little more durable as well.
Yea I dont blame you. It doesnt quite fit with the look of the rest of it. Perhaps if you have any more of the wood you used you can use that and just cut a really thin piece to use as the platform.
I live in canada, and therefore, have to deal with below freezing temps. The issue I have right now is trying to find a car mount that does not utilize that cheap plastic tab in the middle of the sgs2 to hold it in the mount. I have purchased 2 different types on ebay, and both have had that tab snap off due to the cold weather making the plastic brittle. Does anyone know of a product somewhere that has that clip either on a spring hinge, and one that uses a metal clip that wont break in cold weather?
colinlinton said:
I live in canada, and therefore, have to deal with below freezing temps. The issue I have right now is trying to find a car mount that does not utilize that cheap plastic tab in the middle of the sgs2 to hold it in the mount. I have purchased 2 different types on ebay, and both have had that tab snap off due to the cold weather making the plastic brittle. Does anyone know of a product somewhere that has that clip either on a spring hinge, and one that uses a metal clip that wont break in cold weather?
Click to expand...
Click to collapse
I used to own a classic Mini, anyone that has owned one will tell you there is not really any protection inside unlike a modern car.
I used a exogear - exomount in it over winter (-6c for a week was the lowest where I live) and no cracking/snapping or loss of suction.
Its a really great mount, someone posted up about it in here somewhere and Ive loved it ever since.
Here, in Poland, i had a maybe similar issue, the temperatures get from freezing cold to melting hot, always any holder gets broken or just falls off from the window due to the temperatures deforming the sucker. Now im using a Spiderpodium and i can totally reccomend it, if you got a vent near enough to allow you to see the screen without any trouble then that might do the job for you. As an additional pros the vent with air conditioning keeps the phone cool all the time. About a traditional car mount then you could maybe try a universal mount, phone doesnt need to be squeezed into such so there are zero parts that could break off.
Hi,
im using this product ordered from eBay, this is by far the best holder i had, and i tried about 4:
http://www.ebay.com/itm/Universal-C...685656?pt=PDA_Accessories&hash=item27c9391418
didn't try it in a cold weather. i live in Israel and i bought this product this summer. during summer the temperatures can get to close to 40 degrees in the place i live (probably higher inside the car).
in a few occasions my car was in direct sunlight all noon, when i got back to the car the suction cup was a little bit loose, but after a few moments when the car cools down the suction cup is strong again.
it can be rotated 360 degrees, it doesn't wobble and make noise during driving and the suction cup is very strong, never fell of the windshield.
Why not get a proper mount for your phone ? I'm using a Brodit one and it's very tough even when offroading (not mounted on windscreen, but mounted with screws). It fits and holds the phone just great.
All variants for the S2 are here, there's even an adjustable one in case you use a skin case.