Screen Protectors - JASJAR, XDA Exec, MDA Pro Accessories

Hi Peep,
I am wanting to get a screen protector for my exec, does anyone know what the best protector are? I herd Martin Fields one were is the right?

Martin Fields, generally, are very good. You should also look at Brando. I have ordered one from www.expansys.com so should know by the weekend if it is any good.

Brando ultra clear are the best
The brando ultra clear protectors are the best.
I use the ones for the fujitsu Siemens Loox 720 they have the same screensize and fit perfectly!

Is this the Brando version: http://www.expansys.com/product.asp?code=125510
Maybe I'm blind, but expansys don't seem to show the make of their accessories in some cases.

For me, on Screen of my olds P800, P900, P910i, JAM and now on screen and cammeras of my JASJAR, I have a Martin's Field Overlay. In my opinion is the best screen protector.
Have Fun.

Do any of the above provide anti-glaring?

I have just installed a www.proporta.com screen protector. Absolutely brilliant.
On my XDA IIs it was good for the entire duration until I sold it recently.

gavinfabl said:
I have just installed a www.proporta.com screen protector. Absolutely brilliant.
Click to expand...
Click to collapse
Does it fit the screen perfectly? Some screen protectors leave a bit of space for easy replacement, but I prefer it to be exact.

tight fit, took 3 attempts to get right

The Expansys screen protector seems okay. Took a few goes but bubbles were less problematic than I expected. But using a sellotape to remove dust etc that has stuck to the sticky layer did not work as well on the Brando/Martin Fields protectors I have tried for other devices. It seems a bit thicker than other screen protectors I have used. Not sure I'll be keeping it though.

Thanks everyone.

FWIW, I emailed expansys a couple of times about the PocketPcTechs "WriteShield" anti-glare screen protecors and (eventually :? ) got a kinda curt reply with these 2 links:
http://www.expansys.com/product.asp?code=127386&asource=119353
this is the anti glare one
http://www.expansys.com/product.asp?code=125510&asource=119353
this is the normal one
regards expansys
Click to expand...
Click to collapse
I've got a PPcTechs AG shield on my XDAIIs - the difference over some of the others I've tried is amazing! No bubbles ,very smooth to write on and seriously impressive AG wise, diffusing even strong light sources. They are expensive, and it is about 1mm narrower & shorter than the screen but I'm not settling for anything less for my Exec.
HTH

this_mike said:
I've got a PPcTechs AG shield on my XDAIIs - the difference over some of the others I've tried is amazing! No bubbles
Click to expand...
Click to collapse
MY bro just wasted money on a Martin Fields protector as a pressie - fifteen quid including postage.
Not only was it incredibly finicky to take off the adhesive covering (all three of us came to the conclusion that they'd forgotten to add the covering before I took a surgical blade to it as a last resort) but I find it impossible to put on without bubbles, therefore my screen looks awful with it attached. Just dumped it in the bin there now. Just be careful folks, these things are a pain in the arse to attach perfectly, even for someone who paints eyes onto 1" high lead models!
I had to ask myself what's the point? The screen closes inwards for gods sake. Just gonna occasionally use my glasses cloth on it...

i've got the expansis ones and they fit A ok

i've got the expansis ones and they fit A ok

belfast-biker said:
this_mike said:
I had to ask myself what's the point? The screen closes inwards for gods sake. Just gonna occasionally use my glasses cloth on it...
Click to expand...
Click to collapse
All you need is one tiny piece of grit, picked up by static or from your pocket, trapped under the stylus. You'll instantly feel it cut into the plastic as you drag it across the screen. All over in a fraction of a second, and your resale value through the floor.
Click to expand...
Click to collapse

Ineedtoys said:
belfast-biker said:
this_mike said:
I had to ask myself what's the point? The screen closes inwards for gods sake. Just gonna occasionally use my glasses cloth on it...
Click to expand...
Click to collapse
All you need is one tiny piece of grit, picked up by static or from your pocket, trapped under the stylus. You'll instantly feel it cut into the plastic as you drag it across the screen. All over in a fraction of a second, and your resale value through the floor.
Click to expand...
Click to collapse
I'll put up with that - figure it's replacement in one year will cost about £100 to £150 with contract, so that'll be most of that coevered, even with a slightly less than pristine screen.
Click to expand...
Click to collapse

I just got my Brando screen protector today, and while it is clear, it is way too thick. I have to put a lot more pressure on with the stylus to get it to register, i'm going to have to chuck this one and get a thinner one.

Hello Everybody,
I live in madrid and there doesn't seem to be any available screen protector at the monent as the QTEK 9000 in Spanish was just released late november.
I heard that the screen protector of the HP6340 will suffice. Is this true? Are the screen's same size? If not, which older model PDA has same dimensions as the Universal?

Buy it on proporta.com i did it is great, i already had one with my BA and they are perfect.

Related

Screen protectors

I'm a big fan of Brando screen protectors. Unfortunately, they have nothing specifically for the Desire yet. Does anyone know if the protector for the Nexus One will fit the Desire? As HTC make both, is it the same screen?
I doubt it because the nexus one has touch buttons at the bottom of the screen which a protector would probably cover.
Well, I got my DuraSec screen protector today. Not as good as Brando in my opinion but a good stopgap. Two days from Germany - not bad.
NOW WHERE IS MY PHONE?? Looks like it will be another 12 days!
Didnt you order it from tmobile? or going to o2 with it?
Im also interested in screen protectors... nothing came in the box. And theres not even a pouch for it... Kind of worryed about taking it outside the house untill its safe
I guess it would be a few months before leather cases come out for it?
Or do the nexus cases work fine?
Someone told me this place http://www.handtec.co.uk/product.php/2803/htc-desire-screen-protector
I am considering buying it from there.
I'm buying my phone from Handtec so I have to wait. I did ask if they knew whether they would get the screen protectors at the sme time but they said they had no information from HTC. The HTC screen protectors for the HD2 came out some time after the phone and reports were not very good.
DursSec are one of the very few quality ones already available.
Hi,
Just ordered twin pack of official HTC Desire screen protectors from play.com.
£4.99, in stock Monday, del by Wed??
Good Times
DF
Datafanatic said:
Hi,
Just ordered twin pack of official HTC Desire screen protectors from play.com.
£4.99, in stock Monday, del by Wed??
Good Times
DF
Click to expand...
Click to collapse
norm2002 said:
Well, I got my DuraSec screen protector today. Not as good as Brando in my opinion but a good stopgap. Two days from Germany - not bad.
NOW WHERE IS MY PHONE?? Looks like it will be another 12 days!
Click to expand...
Click to collapse
Can you tell me the pluses and minuses of your screen protectors?
I've also ordered a cheap £4.99 double-pack if the HTC jobbies from Play, but I'm fully prepared to buy something else if they are too friction-y, or don't apply/fit properly.
setspeed said:
Can you tell me the pluses and minuses of your screen protectors?
I've also ordered a cheap £4.99 double-pack if the HTC jobbies from Play, but I'm fully prepared to buy something else if they are too friction-y, or don't apply/fit properly.
Click to expand...
Click to collapse
The plus of the screen protectors are self explanatory. They will keep your screen as immaculate as possible, while still retaining full functionality (but you knew that already)
I'm hoping that as the ones from Play are the official HTC ones, they should be perfect for the job.
I'll let you know as soon as i get mine.
Regards
DF
I too have ordered the ones of play.com, they do look to be the official HTC ones, as they are sold at the HTC accessory shop for about £7.99, play.com usually cheaper.
Screen protecter would add that peace of mind tbh, atm i'm paranoid that i'll damage the screen (which itself can damage the screen ironically) - ie, dirty fingers, same pocket with keyes, etc - more chance of haveing a nice screen.
stopgap measure hd2 screen protector cut down to fit
I am worried too. I refuse to put it in my pocket! i put it back in the box when i am not using it lol
Raminder1992 said:
I am worried too. I refuse to put it in my pocket! i put it back in the box when i am not using it lol
Click to expand...
Click to collapse
Wow what have you got in your pocket? Diamonds? Keys?
If it's just a pocket lol you'll be 100% fine. Isn't it a glass screen neway? WOuld have to be a pretty harsh scratch. I'm sure I won't be buying a screen protector for this phone. I think i'll just buy a pouch for it and shall all be good!
OnlinePredator said:
Wow what have you got in your pocket? Diamonds? Keys?
If it's just a pocket lol you'll be 100% fine. Isn't it a glass screen neway? WOuld have to be a pretty harsh scratch. I'm sure I won't be buying a screen protector for this phone. I think i'll just buy a pouch for it and shall all be good!
Click to expand...
Click to collapse
Thank you
I am just worried you know lol
To be honest i have nothing in my pocket
Well i guess i am going to put it in my pocket today!
How would you clean the glass screen?
Raminder1992 said:
Thank you
I am just worried you know lol
To be honest i have nothing in my pocket
Well i guess i am going to put it in my pocket today!
How would you clean the glass screen?
Click to expand...
Click to collapse
Use a clean microfiber cloth
Screen protector from Amazon UK (not tried it myself):
http://www.amazon.co.uk/Vikuiti-DQC-160-screen-protector-Desire/dp/B003CAQAAY/ref=sr_1_fkmr0_1?ie=UTF8&qid=1269823681&sr=8-1-fkmr0
So which is better?
Play.com ones or Handtec ones?
What's the go with reducing sensitivity with the capacitive screens? I know with resistive anything over the top of the screen reduced sensitivity. I'm thinking of just getting a plastic case that slightly sticks out on the sides, meaning that if it was dropped on the ground, the screen won't touch the ground and only the edges of the case. Worked well for my Iphone.
OnlinePredator said:
What's the go with reducing sensitivity with the capacitive screens? I know with resistive anything over the top of the screen reduced sensitivity. I'm thinking of just getting a plastic case that slightly sticks out on the sides, meaning that if it was dropped on the ground, the screen won't touch the ground and only the edges of the case. Worked well for my Iphone.
Click to expand...
Click to collapse
I had a screen protector on my G1 and it didn't reduce sensitivity at all.

screen protector

Ordered this screen protector( http://tinyurl.com/24pks3g) on Mon. Hope it comes today since that is when I will be getting this phone. Anybody ever use clearfreak screen protectors before? Any good? I hope it doesn't look orange peely like the zagg on my g1.
just got my clearfreak yesterday but won't have the phone until 7/23
it feels thinner & more flexible than the zagg , and the cutouts are correct for the vibrant where the zagg has the cutouts for the i9000
larryccf said:
just got my clearfreak yesterday but won't have the phone until 7/23
it feels thinner & more flexible than the zagg , and the cutouts are correct for the vibrant where the zagg has the cutouts for the i9000
Click to expand...
Click to collapse
Just ordered a Clearfreak myself.
(And found the coupon CLEARFREAK4 for 30% off )
Satertek said:
Just ordered a Clearfreak myself.
(And found the coupon CLEARFREAK4 for 30% off )
Click to expand...
Click to collapse
Thanks for sharing the coupon! I just ordered one. It will probably get here before the phone does
Thanks, I'll be ordering one as well .
I'm thinking of picking one of these up.
I've used a Zagg on my G1 which was nice at first, but became real ugly after a while. I eventually removed it because it looked really gross on the edges.
How does this compare? I plan on only getting the screen cover, don't need the back covered.
Why is it cheaper on ebay? It appears to be the official clearfreak ebay account, but their prices are much better (even with coupon) than their website offers. What gives?
Any reason not to put this on my phone? What I liked about the Zagg was that I could just wipe it down once with my shirt and all the smudges were gone instantly. I also liked the smoother surface for gliding my finger. It seems without the Zagg my G1 screen had too much friction.
I've used lots of different brands of screen protectors and found the Invisible Shield to be my least favorite. They are a good product, I just don't like the texture of them - it's a personal preference.
I'm considering not using a protector on this phone, though. I always used a screen protector in the past, even on my clamshell phones, but the durability videos floating around are pretty impressive. Not sure if it's technically Gorilla Glass, but whatever they use, it seems pretty damned tough.
For those of you with a unit in-hand, how durable does that glass seem?
rembonjaski said:
For those of you with a unit in-hand, how durable does that glass seem?
Click to expand...
Click to collapse
I got mine yesterday but I am not quite ready to test the durability. Maybe a braver soul can help though.
BTW I am in for one from Clearfreak from eBay.
Also I don't recommend buying the T-Mobile screen protector, it doesn't cover the whole front, which on this phone is just weird.
I'm not sure about durability as I'm not willing to do any crazy test, but it's going to be hard going with a screen protector b/c the screen is just so nice to use.
That glass really does a nice job with fingerprints. Obviously they're still there, but the glass seems to reduce the effect and they aren't noticeable at all when you're using the phone.
I hear that most screen protectors make fingerprints more noticeable and aren't nearly as smooth.
yet but no matter how hard the glass, it will show degradation from windborne sand, grit etc, or grit/sand in your pocket, salt on your fingers etc
i've got watches with hardened sapphire crystals that i have to polish occasionlly with diamond grinding compound (same stuff used on optical lenses) cause the surface shows microscopic pitting, scratches etc
I've only every used clarivue protectors in the past. I liked them and I will probably post from them when available. Not sure how it will work with swype though.
Sent from my SGH-T959 using XDA App
hey when you get your clearfreaks on your vibrants, can you post how you feel about them. Im lookin for a protector for the captivate and am nitpicky about image quality and touch sensitivity.
I bought the T-Mobile screen protector and I'm not happy at all. It gives the screen a grainy look. I just ordered the Clearfreak one. Its $5.99 on Ebay sold by them.
http://cgi.ebay.com/CLEAR-FRONT-LCD...ewItem&pt=PDA_Accessories&hash=item45f40a3346
flexnix said:
I bought the T-Mobile screen protector and I'm not happy at all. It gives the screen a grainy look.
Click to expand...
Click to collapse
I second this. I removed mine immediately! It turns an amazing display into an average one. Looking forward to the clearfreak reports.
From looking at the eBay pic the ClearFreak doesn't have cutouts for the front facing camera. I checked the Zagg site and their's does.
BradBot said:
From looking at the eBay pic the ClearFreak doesn't have cutouts for the front facing camera. I checked the Zagg site and their's does.
Click to expand...
Click to collapse
There isn't a Front Facing camera for the Vibrant. The one on Zagg is a cutout for the i9000.
Ok I just installed the clearfreak screen protector, followed the directions on their video and and it came out alright I guess, not perfect though. I'm sure it will take some time too set in , but I can see some fingerprints even though I had them wet the whole time. hopefully it improves. When the phone is lit up you can't see any of the flaws and swiping through screens is flawless and very responsive.
I have include two pics, mind you these were take within 30 min. of installing it.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Update: After a few hours it has settled in quite nicely. The finger prints that I thought were there initially are now gone and is super smooth almost too where I forget its even there. Good buy!
the martin fields video had a nice tip for handling the screen protector without getting fignerprints on the sticky side
check the video on their website, but it was a simple idea - using two pcs of scotch tape on either side with half of of the tape not on the protector - gives the user a small "handle" area to use to hold the screen while trying to position it correctly on the phone
just a suggestion
badaphooko01 said:
Ordered this screen protector( http://tinyurl.com/24pks3g) on Mon. Hope it comes today since that is when I will be getting this phone. Anybody ever use clearfreak screen protectors before? Any good? I hope it doesn't look orange peely like the zagg on my g1.
Click to expand...
Click to collapse
I go to walmart get 3-4 sheets for about 8.00 and cut them to size, they work great.

Realook screen protector?

Has anyone used Realook before? They have some on pre-order and will be avail 3/15. If it is good I'll probably put in a order. Thanks!
http://www.amazon.com/Motorola-Crystal-Premium-Protector-REALOOK/dp/B004QFKB7M/ref=sr_1_1?ie=UTF8&s=electronics&qid=1299478352&sr=8-1
bleuiko said:
Has anyone used Realook before? They have some on pre-order and will be avail 3/15. If it is good I'll probably put in a order. Thanks!
http://www.amazon.com/Motorola-Crystal-Premium-Protector-REALOOK/dp/B004QFKB7M/ref=sr_1_1?ie=UTF8&s=electronics&qid=1299478352&sr=8-1
Click to expand...
Click to collapse
Thanks for posting the link: I have been looking for it the last coupple of weeks! I had it on my Samsung Vibrant and in my opinion it is the absolute best screen protector out there!
i'm using the ones from Skinomi and its pretty much impossible to tell its on there if u get it on right =)
djkinetic said:
i'm using the ones from Skinomi and its pretty much impossible to tell its on there if u get it on right =)
Click to expand...
Click to collapse
Skinomi is like InvisibleShield and require a wet application? I want a normal shield protector that just a stick on. Is Realook a wet application too?
bleuiko said:
Skinomi is like InvisibleShield and require a wet application? I want a normal shield protector that just a stick on. Is Realook a wet application too?
Click to expand...
Click to collapse
ya but in my experience they last longer then just the stick on ones
djkinetic said:
ya but in my experience they last longer then just the stick on ones
Click to expand...
Click to collapse
My experience was just the opposite. My InvisibleShield kept peeling but my dry install screen protector was near perfect. I had the iPhone 3GS before the Atrix so I had a Power Support screen protector.
I just placed an order for Realook. I'll report in when I get it!
From the description, it is very similar to the Martin Fields protector which is slightly thick but strong and difficult to scratch.
I purchase this one early before the Realook was being sold:
http://www.amazon.com/gp/product/B004PDHS9Y
It also has good reviews from other Android phones and it comes in 3 pcs/pkg. I'll compare it to the Martin Fields.
i just bought skinomi ones for like 16$ :x
I think the Realook screens are some of the best out there. The surface feel of it is very good albeit not as slick as those anti-glare ones. They aren't the most anti-finger goo, but they're not any worse than any other screen. When the phone is off, and you look at the screen in just the right light and angle (usually 45deg oblique under a fluorescent bulb) you see a very obvious rainbow effect. Not very desirable, but is not visible at any other time so it's okay.
The protection is adequate (never really tested but it works for me). The fit is excellent. Its the regular stick on kind. No touch sensitivity impedance. I've been waiting for the realook one for the Atrix for a while now. Don't understand why it's so hard to just cut plastic sheets...
Best part is that they're not stupidly priced. $10 for 2. Good value.
My room mate got the otterbox case and it came with a screen protector also. I think its one of the best screens I've seen. It seems to be very very anti-finger goo. Gonna look into it.
So I got my Realook cover today so here is a short review:
The packaging came quite professionally and included the standard stuff you would expect from a premium screen protector: microfiber cloth, alcohol wipe for cleaning, and some applicator to aid in putting it on. Each protector was individually wrapped. So good so far.
Now the bad. Both protectors I received were slightly warped; this means that the protector is not very thick. When applied, the warp goes away and does not affect the adhesiveness. What really annoyed me was that they decided to cut out a hole for the front camera; that in itself is not bad, but they decided to cut a U-shape out to the edge of the phone instead of just a circle. This, to me, is laziness or cost-cutting. This cut leaves a part of my screen unprotected. The second issue is that the part around the speaker hole are slightly bent and bubbled, making the protector not stick perfectly on the screen.
See my attached photo for these two issues.
Overall, I would give this protector a 7/10. The protector also shows a rainbow hue when seen from an angle. This doesn't bother me too much, especially when the screen is on, but I expected more. All in all, for $11 bucks for 2, it's not a bad bang for the buck but I'll probably try a SGP. Does anyone have a reveiw for the SGP? Does it cover the camera hole?
the Skinomi has the same outline for the camera.. I think it's standard for our phone..
bleuiko said:
So I got my Realook cover today so here is a short review:
The packaging came quite professionally and included the standard stuff you would expect from a premium screen protector: microfiber cloth, alcohol wipe for cleaning, and some applicator to aid in putting it on. Each protector was individually wrapped. So good so far.
Now the bad. Both protectors I received were slightly warped; this means that the protector is not very thick. When applied, the warp goes away and does not affect the adhesiveness. What really annoyed me was that they decided to cut out a hole for the front camera; that in itself is not bad, but they decided to cut a U-shape out to the edge of the phone instead of just a circle. This, to me, is laziness or cost-cutting. This cut leaves a part of my screen unprotected. The second issue is that the part around the speaker hole are slightly bent and bubbled, making the protector not stick perfectly on the screen.
See my attached photo for these two issues.
Overall, I would give this protector a 7/10. The protector also shows a rainbow hue when seen from an angle. This doesn't bother me too much, especially when the screen is on, but I expected more. All in all, for $11 bucks for 2, it's not a bad bang for the buck but I'll probably try a SGP. Does anyone have a reveiw for the SGP? Does it cover the camera hole?
Click to expand...
Click to collapse
Trust me when I say cutting the U instead of the circle is better. With the circle, if they just punch it out, it warps the material between the speaker and the camera, and leaves a bubble. iPhone 4 screen protectors are bad for this. The AT&T official screen protectors do this too, and it works fine.
I will be putting mine and the gf's on tonight..
From Me

SGP - Steinheil Screen Protector now available

SGP has the screen protector for the xoom.
Steinheil Screen Protector
I'm assuming it's in stock if it's on the webpage.
IMO, this screen protector is way better than the Zagg one. I have one on my incredible and i love it. It's not rubbery and it feels just like the screen.
I've used their Screen Protectors and they are the BEST
Which one is the anti glare one's I have never owned a steingeil one.
brosenz said:
I've used their Screen Protectors and they are the BEST
Click to expand...
Click to collapse
Agreed! The best screen protectors there are. They simply disappear when they are on. Too bad i just ordered a Skinomi. Im going to order this SGP and return the skin.
polo2883 said:
Which one is the anti glare one's I have never owned a steingeil one.
Click to expand...
Click to collapse
If you'd just look around a bit more, you'd find that the Ultra Fine for additional $3 is the anti glare and is also matte.
Looks like it's the one I wanted. I was hoping for something like iFrogz anti glare screen protection I've been using on my iPhone which it totally rocks. Don't like the InvisibleShield, it's still glossy. =P
Thanks for the heads up, going to order one now.
I'm getting one of these. This is the closest thing to the Verizon branded version, which I loved on my Droid, but the XOOM version doesn't cover the entire screen.
I was planning on getting a Zagg using a coupon code from another member here, but decided to do some more research on that product, and have been on the fence about getting it. Now my decision has been made.
If anyone wants the Zagg code, let me know. I'll PM it to you. You have to use it before Friday, I believe.
I just ordered one. There is a coupon code to save 10% too: SGPVerizon
mystified said:
I just ordered one. There is a coupon code to save 10% too: SGPVerizon
Click to expand...
Click to collapse
I was just about to post that one as well. Ordered an Ultra Fine one with the coupon. 28.94 total.
Thank guys! I just ordered the Ultra Fine as well. I like the idea of matte finish to reduce glare. Glare is ridiculous on the Xoom. My nook is much better about reducing glare. Anyway, thanks again! Hope the protector doesn't reduce vibrance of the colors nor clarity.
Man, I hate how much reflection the Xoom picks up. Unless, you're in a dark room, it's hard to see the screen sometimes. I love the idea of the Ultra Fine SGP. I don't think I've ever used SGP, but I know they have a good reputation.
If anybody could post a video, or screenshots of the Anti-glare when they get it, that would be great! I'm just holding off for now because I want to know if it reduces the screen quality much. But looking at YouTube reviews of this on the iPad, it greatly reduces glare.
Here's a good video review of *cough* other tablet's SGP Anti-Fingerprint...
http://www.youtube.com/watch?v=HLUUqQHn68I
Good thing I waited to get a protector, because this looks like it's just the ticket.
Ordered the Ultra Fine.
They are indeed high quality but there are visible scratches from swiping on the one installed on my Droid X just three months ago. Is this typical? Thus far I have no scratches whatsoever on the VZW protector on the Xoom.
And this is from someone who is fanatical about taking care of my electronics.
Skydog said:
They are indeed high quality but there are visible scratches from swiping on the one installed on my Droid X just three months ago. Is this typical? Thus far I have no scratches whatsoever on the VZW protector on the Xoom.
And this is from someone who is fanatical about taking care of my electronics.
Click to expand...
Click to collapse
Yes, this is normal. I've had a Steinheil on my Incredible since May and there are multiple scratches but they're not unsightly. You have to take into account that you're not putting the Xoom in your pocket with various sharp/metal objects, so as long as your fingers and screen are relatively clean, you won't see those same scratches you do on your phone's protector.
I love Steinheil btw...
Nom Prophet said:
Yes, this is normal. I've had a Steinheil on my Incredible since May and there are multiple scratches but they're not unsightly. You have to take into account that you're not putting the Xoom in your pocket with various sharp/metal objects, so as long as your fingers and screen are relatively clean, you won't see those same scratches you do on your phone's protector.
I love Steinheil btw...
Click to expand...
Click to collapse
Thanks. That's why I asked -- I use a clean microfiber cloth to wipe regularly and it is kept in a case in my purse and never in a pocket. I was surprised at how easily it scratched from clean fingertips.
Oddly, I haven't seen a scratch yet on the VZW/Xoom and but expected to. Guess I am spoiled with Giottos AEGIS Pro LCD Screen Protectors for my DSLRs but they are made of German Schott glass.
Skydog said:
Thanks. That's why I asked -- I use a clean microfiber cloth to wipe regularly and it is kept in a case in my purse and never in a pocket. I was surprised at how easily it scratched from clean fingertips.
Oddly, I haven't seen a scratch yet on the VZW/Xoom and but expected to. Guess I am spoiled with Giottos AEGIS Pro LCD Screen Protectors for my DSLRs but they are made of German Schott glass.
Click to expand...
Click to collapse
Well mine's probably horrible compared to yours! I was also careful at first, making sure it was in pockets solely by itself, but after the first two or three scratches, I stopped caring. You got me thinking that I should put the backup that they sent on!
And on that note, only one comes for the Xoom, correct? I'm very obsessed about getting it perfectly laid without a speck underneath.
Nom Prophet said:
Well mine's probably horrible compared to yours! I was also careful at first, making sure it was in pockets solely by itself, but after the first two or three scratches, I stopped caring. You got me thinking that I should put the backup that they sent on!
And on that note, only one comes for the Xoom, correct? I'm very obsessed about getting it perfectly laid without a speck underneath.
Click to expand...
Click to collapse
Yes, it is a single protector but I wouldn't be concerned - they are not fragile and easy to apply. Just be sure to find a very clean, nearly dust-free area and wash your hands well before application. I usually keep a lens blower handy as well as a couple of pieces of Scotch tape. I place the tape on opposite corners for easier control of placement.
received the ultra crystal screen protector & just finished putting it on. quite simple to apply. love the clarity. will do the same on my wife's xoom tonite.
icedhot said:
received the screen protector & just finished putting it on. quite simple. love the clarity. will do the same on my wife's xoom tonite.
Click to expand...
Click to collapse
Awesome, can't wait to get mine!
icedhot said:
received the screen protector & just finished putting it on. quite simple. love the clarity. will do the same on my wife's xoom tonite.
Click to expand...
Click to collapse
Did you get the crystal or ultra fine? I ordered the ultra fine and hoping there isn't too much loss on viewing quality.

[Q] Moto X Screen Protectors ?

Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
I'm currently using the SUPCASE Screen protector that came with my case: has everything I need to get it on once and only once(even comes with a lint remover film). Looks and feel great. I don't know what you mean by 'gummyness though, the only screen protector I would describe that has a gummy-like feel(especially when I pinch with my fingernail is the Skinomi brands.
pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
JoeSchmoe007 said:
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.
Click to expand...
Click to collapse
I'll second these. I had the ArmorSuit and it was terrible. These are cheap, durable and don't negatively affect the screen.I've been using one for over 2 months and it still looks fine.
The screen protectors from Motorola are very good.
pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
I bought a couple of the Mimeusa.com glass screen protectors, one for my wife and another for myself. Installed mine first, its a little different installing such a stiff protector, luckily i was able to lift it back up easily a couple times to adjust the positioning.
The wifes I installed a couple hours after, and it felt like it gave me more problems. didn't want to get positioned right, but eventually I got it lined up well.
The next day it fell off in her car while she was driving and got covered in dirt and dust on the adhesive side.
Mine is still on, after 2 weeks of use;
The texture is awesome! i hate most screen protectors, but this is glass and feels so good to the touch. you hardly notice its there.
It hasn't taken and scratches, and it does feel like fingerprints are less noticeable than on the bare screen.
I don't have a case of my X yet, ordered a bumper from amazon, but its not here yet.
I feel that the protector gathers small fibers easily at the edge. there are a couple of very small fibers that have worked there way just under the edge of the glass. They are hardly noticeable, especially when the screen is on.
I have not seen any new accumulation since the first few days, so maybe its more prone to catching the fibers in the hours / day after installation. I would advise avoiding pockets for 24 hours after installing this product if you can.
I will probably use this screen protector until it chips/breaks/gets too scratched up, and then go naked screen for the rest of the phones life.
If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.
pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
Do you Google?
eksasol said:
If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.
Click to expand...
Click to collapse
That's very expansible for me i think...
I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete
pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0
Wingdom said:
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0
Click to expand...
Click to collapse
+1 on this stuff. Been using it on my last 5 phones in the family. Especially great since the wife and I usually are yearly on replacement devices
Sent from my XT1053 using Tapatalk
Disclaimer: I posted this in a couple other threads, but I wanted to try and post it where I know we've been discussing tempered glass screen protectors.
Here's some pictures of the redesigned i-Blason protector. As you can see, there is now a cutout for the proximity sensor. The corners also fit the Moto X perfectly (their old design fit perfectly too). Very happy I finally have a protector that FITS and where the proximity sensor won't be blocked! I liked the i-Blason until I had started having proximity sensor issues because I had dropped it several times, and it never once cracked, unlike the MIME, which cracked the very first time I dropped it.
pasta1234 said:
I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete
Click to expand...
Click to collapse
i have tempered glass on my moto X ( mimeusa.com/product/moto-x-ghost-glass-screen-protector/ ) since january.
it was very easy to install and the feel is wonderful. my only complaint is that when you drop your phone, it can crack. better a crack on the protector than a scratch on the device, right? my phone has been pretty suicidal lately, what w/ jumping off tables, so it has accumulated many cracks on the protector. i am replacing it (with same ghost glass) and also buying a bumper case ... that may make a difference in the life span of the protector.
this is my first glass protector and yes i like it. on previous devices i used zagg screen protectors and was VERY HAPPY with them, but when i ordered their protector for the moto X, i found that they must have screwed up on the device specs, as the film didn't even cover the entire viewing screen. UNACCEPTABLE! i will not go back to their products.
I had the MIMEUSA and was very happy with the feel of the MIMEUSA, but it didn't fit properly. The corners were too squared and extended over the screen. The edges were also suppose to be beveled to prevent chipping but mine seemed like they were beveled out, leaving a lip on the glass. This all led to the edges chipping and eventually a larger break.
I ordered the i-Blason to try it and am very happy. The fit is perfect, its quite a bit thinner than the MIMEUSA, and it feels just as slick and smooth as the MIMEUSA and the glass screen. I would recommend the i-Blason over the MIMEUSA. And the i-Blason is only $17 on Amazon making it about the same price as the high quality plastic protectors.
James4.0 said:
The screen protectors from Motorola are very good.
Click to expand...
Click to collapse
+1. The Power Support protectors are very good. Their 15% off right now as well, till March 21st.

Categories

Resources