Develop Bugs

where is HKEY_LOCAL_MACHINE settings in MDA PRO ?

i need to change a key in HKEY_LOCAL_MACHINE. could you please inform with which software can i find this key in which WM5 folder or file ?

Google for Mobile Registry Editor
or search the forumes here for Registry Editor

I use this one..PHM Registry Editor
http://www.phm.lu/Products/PocketPC/RegEdit/
Cheers !

I use this one..PHM Registry Editor
http://www.phm.lu/Products/PocketPC/RegEdit/
Cheers !

ALL rgu to hv conversions are wrong!!! WHY?

Has anyone else noticed that the HV to RGU and RGU to HV convertors Suck.
None of them work properly and they throw load of errors up.
Below is an example of what i am getting:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
As everyone can see these are all wrong, when i try to process back from rgu to hv i get error messages, and the only way to get rid of the error messages is to do this:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
You have to manually site there pressing return all the way through BOTH registry rgu's
what is the problem with this. does anyone else get this?
I have been sat here for 3 hours trying to get all of the entries on separate lines.
there has to be a faster way of doing this?
are you seriously trying to tell my that JJ, Sleuth, Schaps etc etc all sit there for hours pressing return?
No i dont think so, so it is possible that someone can enlighted me as to what i am doing wrong
thanks
bennec83

Ive never experienced any errors with rgu to hv and voce versa conversions. I'm still using CORE's Kitchen!

Set 'Wordwrap' to 'off' when editing if using Notepad.

And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.

bernardryan said:
And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.
Click to expand...
Click to collapse
Right.
Never 'take for granted' every details.

make sure you have both .dll's present in the directory when you make the conversions (cereg400.dll & msvcr71.dll).
i had similar issues and found out I forgot to copy one of them althou everything "seemed" to work fine.
cheers,
dan

Somewhat related issue ... any help appreciated...
I'm trying to build a package for one of the apps I always use. I have been somewhat successful, but I see (when doing a WinDiff comparison on REG dumps before and after CAB installation), that there are several more Registry Entries created than can be gleaned from the CAB file. Several of these REG entries include a CLSID.
I used one of the online GUID generators to provide me with the GUIDs for the DSM and RGU files ... no problem.
But the CLSID entries already in my registry dumps obviously don't match this ID. So, do I:
1) make the CLSID entries in my RGU to match the ones in my REG dump?, or
2) make the CLSID entries in my RGU the same as the ones generated for my DSM and RGU files?, or
3) Change the GUID numbers on my DSM and RGU to match those of the REG dump?
Does it matter WHICH way I do it? Do my GUID numbers need to match the CLSID numbers at all?
Any help would be greatly appreciated.
Thanks a lot,
-pvs

(Updated 04.02.11) HIVE AND REGISTRY FILE EDITOR

Hive and registry file editor 2.0.112
A command line utility to work with hv files.
Full Unicode support, and more.
!!! WARNING !!!
Do not use CeRegEditor (cereg) to work with .hv !!!
!!! WARNING !!!
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
Release history:
---------------------
V. 2.0.112
+ Some changes.
V. 2.0.035
+ Extract hive to the .hvm text file.
+ Build hive from .hvm file.
V. 1.0.000 (Initial Release)

Don't need Unicode??
and I'm wondering whether the "REGEDIT4" is needed.

btxakita said:
Don't need Unicode??
Click to expand...
Click to collapse
Who spoke?
btxakita said:
and I'm wondering whether the "REGEDIT4" is needed
Click to expand...
Click to collapse
Yes.

NEW Release
V. 2.0.035
Added new functions:
+ Extract hive to the .hvm text file in Unicode format.
+ Build hive from .hvm file.
AnDim

AnDim said:
NEW Release
V. 2.0.035
Added new functions:
+ Extract hive to the .hvm text file in Unicode format.
+ Build hive from .hvm file.
AnDim
Click to expand...
Click to collapse
A dump question I'm sure, I started cooking recently and I'm wondering what I could accomplish with this application. In what scenario would I use it? Thanks, 12

Thanks. One problem I had w/ rgucomp is missing unicode support.

12aon said:
A dump question I'm sure, I started cooking recently and I'm wondering what I could accomplish with this application. In what scenario would I use it? Thanks, 12
Click to expand...
Click to collapse
What exactly is not clear?

Thanks AnDim, this makes GSM -> CDMA SYS porting much easier.

AnDim said:
What exactly is not clear?
Click to expand...
Click to collapse
Well I think I'm starting to understand. As I always have had the luxury of initflashfiles.txt or app.reg and never edited the .hv manually. It was unclear to me why I would need this or what it would add to a kitchen that supports those features (initflashfiles.txt and app.reg)
So does this app have a function in such a kitchen, I mean is there anything I will need to do manually that can't be done otherwise or is this more like a general app so that the hives on any phone can be more easily changed?
Thanks 12

@AnDim, PMed you.

Have anyone used this program? It's not working well for me. I use it fo rgu to hv convert but when i compare the output hv file with cereg alot different files

prpetrov said:
I use it fo rgu to hv convert but when i compare the output hv file with cereg alot different files
Click to expand...
Click to collapse
!!! WARNING !!!
Do not use CeRegEditor (cereg) to work with .hv !!!

how does project folder need to be set up to build default and user hv's?
BUG: Default value is imported and exported incorrectly
If I convert an rgu which contains
Code:
@="one"
"Default"="two"
hvedit overwirtes the default value with "two"
Request: option to specify output file

selyb said:
how does project folder need to be set up to build default and user hv's?
Click to expand...
Click to collapse
HVEdit.exe <My project folder>
Don`t need to be setup. Rgu´s, packages.sof and so on, can be in any sub folders.
selyb said:
BUG: Default value is imported and exported incorrectly
If I convert an rgu which contains
Code:
@="one"
"Default"="two"
hvedit overwirtes the default value with "two"
Click to expand...
Click to collapse
Hey man .... Key name "Default" == Key name @
selyb said:
Request: option to specify output file
Click to expand...
Click to collapse
??? f.e.
AnDim

sorry, I misunderstood. Until now, I didn't know you could use "Default"=
selyb said:
Request: option to specify output file
Click to expand...
Click to collapse
What I mean is like
Code:
hvedit myhive.hv myhive.txt
so hvedit would export myhive.hv to myhive.txt

selyb said:
What I mean is like
Code:
hvedit myhive.hv myhive.txt
so hvedit would export myhive.hv to myhive.txt
Click to expand...
Click to collapse
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
AnDim

AnDim said:
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
AnDim
Click to expand...
Click to collapse
Hi,
thanks for this software it works great, if you now how to put this commands.
My experience was this:
D:\>hvedit.exe hive d:\hive
or:
D:\>hvedit.exe hive d:\hive\user.hv
I'm getting this:
(HVEdit) !ERROR: failed building DEFAULT hives.
When I copy HVEdit.exe and cereg400.dll to d:\hive and run this:
D:\hive>hvedit.exe d:\hive\user.hv
I'm getting this:
Admsoft (R) HVEdit Version 2.0.035
Hive and registry file editor.
(C) 2009 AnDim, XDA-Developers.
(HVEdit) Extracting user.hv ...
(HVEdit) Done! and only 21.kB of 69kB .hv file
When I run it on system.hv like this:
D:\hive>hvedit.exe d:\hive\system.hv
I'm getting this:
(HVEdit) Extracting system.hv ...
ERROR: C:\MacB\private\winceos\COREOS\filesys\reg\reghive\.\registry.c line 172: Reg: Invalid reghandle 0x20000a61
and 144kB .hvm file of 105kB .hv
I didn't mention it but I was trying to convert .hv to .hvm
Maybe my dump has got some errors in it.
Any idea what is wrong, why the user.hvm is so small?

Thank you AnDim for great software. It is quite difficult to find out utility for ce hive.
After use for a period I would to to report some small problem.
1. Long multi string was trimed. (Maybe fixed length variable in code) See Ex.
Registry key in my rgu file is
REGEDIT4
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt]
"DirsToExclude"=multi_sz:"\\mxip_initdb.vol",
"\\mxip_system.vol",
"\\mxip_notify.vol",
"\\mxip_lang.vol",
"\\cemail.vol",
"\\pim.vol",
"\\Documents and Settings\\default\\user.hv",
"\\Documents and Settings\\system.hv",
"\\Windows\\Profiles\\guest\\Temporary Internet Files\\",
"\\Windows\\Profiles\\guest\\Cookies\\",
"\\Windows\\Profiles\\guest\\History\\",
"\\Windows\\Activesync\\",
"\\Windows\\messaging\\",
"\\Temp\\"
After change to boot.hv and extract back to boot.hvm the Registry is as hereunder.
; Admsoft (R) HVEdit Version 2.0.035
; Hive and registry file editor.
; (C) 2009 AnDim, XDA-Developers.
;
;
; Source file: boot.hv
; Size: 28672 byte
; Hash: e9e4f2edd12c78eeed7aceeaea22c36f
; Boothash: 1ef4fb8f2b109c0757709e7f46c71a20
; Build tool: HVEdit v2.0
[HKEY_CLASSES_ROOT]
[HKEY_CURRENT_USER]
[HKEY_LOCAL_MACHINE\System\ObjectStore\RegistryUpdate]
"boot.rgu"=hex:1E,F4,FB,8F,2B,10,9C,07,57,70,9E,7F,46,C7,1A,20
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt]
"DirsToExclude"=multi_sz:"\\mxip_initdb.vol",
"\\mxip_system.vol",
"\\mxip_notify.vol",
"\\mxip_lang.vol",
"\\cemail.vol",
"\\pim.vol",
"\\Documents and Settings\\default\\user.hv",
"\\Documents and Settings\\system.hv",
"\\Windows\\Profiles\\guest\\Temporary Internet Files\\",
"\\Windows\\Profiles\\guest\\Cookies\\",
"\\Windows\\Profiles\\guest\\History\\",
"\\Windows\\Activesync\\"
[HKEY_USERS]
; (HVEdit) Done!
2.The size of hv file is larger than original. (This is not effect functional just file size is increase from 732kb to 744kb for instance.)
After investigate, there was extra length on data key which have length just fit 32 bits size. (Maybe when adjust cell size to fit 32 bits)
Hope my comment will be some benefit for you for next version.
Regards,

AnDim said:
Hive and registry file editor 2.0.035 (C) 2009 AnDim
A command line utility to work with hv files.
Full Unicode support, and more.
!!! WARNING !!!
Do not use CeRegEditor (cereg) to work with .hv !!!
!!! WARNING !!!
Usage:
HVEdit.exe <rgu>|<dump>|<hive>|<hvm> [-r] [<outputdir>]
<rgu> Build boot.hv from rgu file.
<dump> Build default.hv and user.hv from project folder.
<hive> Output hive file contents to the <hivename.hvm> text file.
<hvm> Build hive file from hvm file.
-r Don't insert *.rgu hash value to the hive.
Release history:
---------------------
V. 2.0.035
+ Extract hive to the .hvm text file.
+ Build hive from .hvm file.
V. 1.0.000 (Initial Release)
(C) 2009 AnDim
Click to expand...
Click to collapse
This seems to be JUST what I am looking for .... but I am having problems trying to use I suspect is simply a case of finger-trouble on my part, so will greatly appreciate any help available from AnDim or any other users who can point me in the right direction, please.
I think I correctly understand the command line syntax and have run HVEdit to unpack a default.hv registry file taken from a dumped ROM (Toshiba TG01). I then made some basisc edits to the resulting .hmv file and used HVEdit again to recompile back to .hv.
When the ROM is recompiled and flashed it refused to boot. So I went back and tried using HVEdit to convert to .hmv and back without making any changes. Same problem.
I have attached the .bat files i used to run for reference....View attachment 305797
I have been reading about a need to insert REGEDIT4 at the start of the file; have tried doing so but that just results in an error.
Any guidance will be greatly appreciated

Request Response !!
Is anyone able to offer any assistance on this question please
Help will be much appreciated !
kevinpwhite said:
This seems to be JUST what I am looking for .... but I am having problems trying to use I suspect is simply a case of finger-trouble on my part, so will greatly appreciate any help available from AnDim or any other users who can point me in the right direction, please.
I think I correctly understand the command line syntax and have run HVEdit to unpack a default.hv registry file taken from a dumped ROM (Toshiba TG01). I then made some basisc edits to the resulting .hmv file and used HVEdit again to recompile back to .hv.
When the ROM is recompiled and flashed it refused to boot. So I went back and tried using HVEdit to convert to .hmv and back without making any changes. Same problem.
I have attached the .bat files i used to run for reference....View attachment 305797
I have been reading about a need to insert REGEDIT4 at the start of the file; have tried doing so but that just results in an error.
Any guidance will be greatly appreciated
Click to expand...
Click to collapse

[App] RGUber v1.21a, RGUOrder v1.4

Purpose:
This purpose of this VBScript is to process and organize data in RGU/REG files to remove duplicates, identify faulty entries, and move entries to ascending alphabetical order (the same way it is displayed in a registry editor).
Requirements:
Windows Scripting Host (included in most versions of windows)
rgucomp.exe and cereg400.dll located somewhere in your path (same folder as the script probably won't work if the script is run from another folder)
.reg and .rgu files are expected to be UTF-16LE with BOM
Usage:
Drag a .rgu, .reg, or .hv onto RGUber.vbs OR run "wscript.exe RGUber.vbs example.rgu"
Details:
When an rgu|reg file is specified, RGUber will:
1) create backup of input file
2) rename input file to boot.rgu
3) use rgucomp to convert it to *.hv
4) use rgucomp to convert new .hv to original rgu path\name
5) Reorder all keys in ascending alphabetical order and all values for each key in ascending alphabetical order with default value first
When an hv file is specified, RGUber will:
1) use rgucomp to convert it to *.rgu
2) Reorder all keys in ascending alphabetical order and all values for each key in ascending alphabetical order with default value first
Options
Open RGUber.vbs in your favorite text editor. All options are set at the beginning with (hopefully) meaningful descriptions.
Code:
'//Path to rgucomp (leave this as default if rgucomp.exe is located in your system path)
Const RGUCOMP = "rgucomp.exe"
'//Path to notepad, only needed if %OPENAFTER% is true
Const NOTEPAD = "notepad.exe"
'//The following options can be set to True/False or 0/1
'//Organize registry entries in ascending alphabetical order
Const REORDER = True
'//Open in %NOTEPAD% after conversion is done
Const OPENAFTER = False
'//Save any errors from rgu -> hv conversion
Const LOGERRORS = True
'//Save a backup copy of %INPUTRGU% as "%INPUTRGU%_Backup.rgu"
Const BACKUPRGU = True
Other info
If target file already exists, RGUber will ask if you want to overwrite.
Text files (the MS way) typically contain CRLF for next line. Output from rgucomp.exe contains many CRCRLF. RGUber removes the extra CR.
I have very few comments in the code. If requested, I will upload another copy with as many detailed comments as I can manage.
I tried to code this as efficiently as VBScript can possibly be. I kept getting errors when trying to run 'rgucomp.exe -b -nologo' so instead of running it directly, RGUber creates a bat file, executes it, then deletes it.
On my AMD Phenom 9600 with Vista64 and 3 SATA in Raid5, RGUber completes rgu->hv->rgu of 2084 lines in <3s
RGUber always saves output from rgu->hv conversion but deletes the file if there were no errors.
RGUber crashes on files with no reg entries (e.g. empty app.reg in an EXT package that does not add any registry entries)
Changelog:
v1.21a
Values are now sorted in alphabetical order for each key
v1.2
Replaced Organize function with one from RGUOrder
Lost ability to reorder values for each key (To be readded in next version)
v1.1
Fixed a bug with removing hashdata from output (RGUber would mix data from two keys under one)
Changed sorting algorith with a much faster one
v1.02
Added option to remove RegistryUpdate key from rgucomp output
Fixed a typo where RGUber was not removing the system attribute from input rgu files
v1.01
Fixed typo where RGUber was waiting for backup file instead of log file
Change 'Done' msgbox to one that shows beginning time and ending time
v1.0
Initial Release
RGUOrder v1.4
This script will only reorder the contents of an rgu without processing with RGUComp, thereby keeping comments and delete key entries. RGUComp/cereg400.dll are not needed to use this app.
Changelog:
v1.4
Fixed a bug where if the original rgu did not end with a new line then the last entry after being sorted would be lost.
Fixed two bugs where only the first 25 tabs and first 25 spaces would be removed before sorting (This did not affect data integrity or performance, but the checksum would be different each time you run the output back through RGUOrder until all the original tabs/spaces were removed)
Added code to prevent multiple entries of the same key from being reordered
Fixed other miscellaneous bugs/oddities introduced with v1.3
v1.3
Added code to add a delete key for each subkey of a deleted key so that when reordered, the key deletion isn't broken
v1.2
Fixed a bug where the last key processed was being concatenated to another with no CRLF producing an invalid rgu file

I'm not sure if this relates to your app but I have a small question:
If a dumped a rom (raw, not kitchen type) and removed several apps/programs but did not clean the registry (very tedious), will this help me clean it up (remove dead paths, etc)?
And if so, how will it know just by dragging the .hv file? I mean how will your app know if a registry entry does not have the app/program included in the rom anymore?
Please forgive me if my question does not relate to your app

There is no way for my app to know, it isnt that smart
It would take an extensive app/database to know which keys are related to which apps.

Thanks for this post

updated to v1.1
v1.02 had a bug in the code which removed hash data from output which made it mix data from the key before it with the key after it
If I ever get around to updating again, I will use hvedit instead of rgucomp

I get an error.
Script: D:\RGUber.vbs
Line: 136
Char: 2
Error: File not found
Code: 800A0035
Source: Microsoft VBScript runtime error
Any reason why?
I attach the file i want to sort alphabetically.

I have no idea
It worked for me with no problem (file attached)
Please tell me the location of RGUber.vbs and of 51329f91-0017-4364-bcff-e032c5d45b01.rgu

Great application bro!!
Only limitation is that I have to put reg400.dll and rgucomp in C:\windows

c_shekhar said:
Great application bro!!
Only limitation is that I have to put reg400.dll and rgucomp in C:\windows
Click to expand...
Click to collapse
yeah, I tried to get around that but I didn't find anything feasible with vbscript :-/
Actually, they don't have to go in C:\windows
I reinstall windows regularly so I keep as many apps portable as I can. I have a bin folder on another partition that I add to the system path variable after a new install for stuff like this.

selyb said:
yeah, I tried to get around that but I didn't find anything feasible with vbscript :-/
Actually, they don't have to go in C:\windows
I reinstall windows regularly so I keep as many apps portable as I can. I have a bin folder on another partition that I add to the system path variable after a new install for stuff like this.
Click to expand...
Click to collapse
can you elaborate this a bit more. Because I too would like a similar arranfements...

My C:\ partition has Vista64
My F:\ partition has all my documents, downloads, music, movies, etc and a folder F:\bin\
F:\bin contains >100 downloaded command line programs and vbs scripts that I have written including
RGUber.vbs
lame.exe
rgucomp.exe
cereg400.dll
FixVTS.exe
faad.exe
nuerecmod.exe
Tag.exe
find Advanced System Properties (I can't remember how, it's different for XP/Vista/7) go to the Advanced tab and hit the Environment Variables button
Under system variables, scroll down to 'Path', double click it. This defines your 'system path'. It contains a list of folders separated by semicolon ";". At the end, add a semicolon and the path to the folder you want to add (e.g. ;F:\bin) after that, hit ok. XP may need to reboot to reflect the change but I'm not sure. Vista and 7 are affected immediately.
With this setup, you can open a command prompt in any folder on your computer and type "RGUber.vbs xyz.rgu" and it would work as if all the files are in that folder.

Thanks a lot bro!!!
I am grateful...

I'd really like to use this, but unfortunately I get this error regardless of the app.reg I drag onto the script:
Script: C:\RGUber\RGUber.vbs
Line: 232
Char: 3
Error: The system cannot find the path specified.
Code: 80070003
Source: (null)
Thanks if you can advise.

Quetzecotyl said:
I'd really like to use this, but unfortunately I get this error regardless of the app.reg I drag onto the script:
Script: C:\RGUber\RGUber.vbs
Line: 232
Char: 3
Error: The system cannot find the path specified.
Code: 80070003
Source: (null)
Thanks if you can advise.
Click to expand...
Click to collapse
Hmmm... this line asks the system for what is in the %temp% variable and attempts to change the working directory to the result.
Open RGUber.vbs in notepad and go to line 232
Modify
Code:
WSH.CurrentDirectory = WSH.Environment("SYSTEM")("temp")
to
Code:
WSH.CurrentDirectory = "C:\RGUber\"
then try again

Works great after your fix, selyb. Thank you for this useful app and your many helpful contributions to the Kaiser forums.

Quetzecotyl said:
Works great after your fix, selyb. Thank you for this useful app and your many helpful contributions to the Kaiser forums.
Click to expand...
Click to collapse
Yeah, I may relocate from Kaiser forums to Rhodium. I have an AT&T Tilt 2 in the mail to me ATM

Grats on getting a Rhodium. Found a question after using it for a while. This is just one example of such behavior, but why does:
Code:
[HKEY_CURRENT_USER\Software\HTC\TaskManager\ExclusiveList\System]
"CMBandSwitching.exe"=dword:0
get turned into:
Code:
"CMBandSwitching.exe"=dword:0
How do I make it regard CURRENT_USER keys?

Quetzecotyl said:
Grats on getting a Rhodium. Found a question after using it for a while. This is just one example of such behavior, but why does:
Code:
[HKEY_CURRENT_USER\Software\HTC\TaskManager\ExclusiveList\System]
"CMBandSwitching.exe"=dword:0
get turned into:
Code:
"CMBandSwitching.exe"=dword:0
How do I make it regard CURRENT_USER keys?
Click to expand...
Click to collapse
I had this problem with an earlier version. If you are using v1.1 then please attach the original rgu/reg. I have tried and I can't seem to reproduce it since I fixed it already.

Please, replace rgucomp with hvedit . I really need your help because rgucomp doesn't work for me . Thanks in advance .

tomcug said:
Please, replace rgucomp with hvedit . I really need your help because rgucomp doesn't work for me . Thanks in advance .
Click to expand...
Click to collapse
why doesn't rgucomp work? I would be surprised to learn that hvedit will work when rgucomp won't.

trying to use mortscript to delete directory..

hi guys,
sorry if this is not the correct place for this post..
This is in windows mobile on my HTC HD2.
I have been trying to use mortscript to create a little batch file that I could click on to remove the \Android folder and all of its contents on the root of my \Storage Card
i made this file called removeandroid.mscr
and here are the contents of that file:
******************************************
DelTree(Android)
RmDir(Android))
Message("The Android Files Have Been Deleted")
******************************************
Now, when i ran it, it deleted just about every file that was contained on my \Storage Card....
can someone help me with the syntax please ?
this file will reside on the root of the \Storage Card
possibly it might be with forward slashes in front of Android like this ....
******************************************
DelTree(Android)
RmDir(Android))
Message("The Android Files Have Been Deleted")
******************************************
the * symbols are just here for this posting, they do not reside in the file.
thanks for your help.
kevin rea
palmdale, calif.

Deltree probably did not like that you did not have a clear path to what to delete.
Try
Code:
If( DirExists("\Storage Card\Android"))
DelTree("\Storage Card\Android")
RmDir("\Storage Card\Android")
Message("The Android Files Have Been Deleted")
Else
Message("The Adroid Folder Was Not Found on Storage Card")
EndIf

Thanks very much Rory !!
Kevin Rea