Related
Hi,
I'm from Belgium and together with some friends we bought 3 QTEK 9090 .
They all seem to have te same problem ...
Occasionally, when answering the phone ,no sound is transmitted.
I can't hear the caller and the caller can't hear me.
Does anyone has the same problem ?
Is there a solution for this annoying problem.
We already tried with other simcards from other providers but that didn't help.
Rom version is 1.22 WWE
Thank 's for any suggestions
Greetz
Pesadilla
This problem is widely known, and no fix has been successful. You must reset your phone when this happens. Apparently, turning on and off bluetooth fixes it as well.
Even the 1.40 Rom still has this issue.
Thank you for your reply.
What I don't understand is that if the problem is known, why isn't there a solution coming from QTEK ?
They must be aware of this problem also.
Greetz
Pesadilla
TheLastOne said:
This problem is widely known, and no fix has been successful. You must reset your phone when this happens. Apparently, turning on and off bluetooth fixes it as well.
Even the 1.40 Rom still has this issue.
Click to expand...
Click to collapse
Hmmm, since I installed Radio ROM 1.10 I no longer have this problem (even with 1.40 ROM).
As soon as I have some time , I will try it out .
Thanks for your advice !
Greetz
Pesadilla
HappyGoat said:
TheLastOne said:
This problem is widely known, and no fix has been successful. You must reset your phone when this happens. Apparently, turning on and off bluetooth fixes it as well.
Even the 1.40 Rom still has this issue.
Click to expand...
Click to collapse
Hmmm, since I installed Radio ROM 1.10 I no longer have this problem (even with 1.40 ROM).
Click to expand...
Click to collapse
Um... i don't think that's vaild. I had the no sound problem with all my roms.. then... I installed 1.40... VOLA.. the phone functions again.. no "no sound" problem.... I was a happy camper for 2 weeks.... then... then.... then... 2 weeks later.. the problem came back... it came back and now it happens 2 twice a day.. just like before.
I strongy believe that is has somthing to do with the Bluetooth and the handfree profile .. cos.. when the no sound thing happens.. when u try to move the volume key up or down... there is minor sound coming from the phone speaker. Then.. when your phone is normal operation.. try using your Bluetooth handfree.. make a call... when the bluetooth headset is working normally, try picking up your phone and try to move the volume key.. the same patterns of sound comes from the phone's speaker...
Just my 2 cent..
My conclusion is that even if your Bluetooth isn't on, when a phone calls come in, the phone automaticy switch to the bluetooth headset profile and disable the speaker and mic on the unit.
Hi,
I have recently upgraded to WM 6.1 and tested various ROMs.
One problem I came across is that on a phone conversation my voice can hardly be heard on the other side
Did anyone encounter this? Any idea what it may be?
Turn off WOW EFFECTS in setting...
I don't think I ever turned WOW EFFECTS on (at least not intentionally).
Where would I find this setting?
as I told you, in settings...
the personal tab.
i also have that problem. been plaguing me for a long long time.
Try a few diff types of roms but make sure they have
1. Start up animation disabled
2. SetAcousticparam in their config file
these 2 are absolutely essential, else your phone voice would be low.
though mine is more or less confirmed to be a hardware problem. if you flash the official HTC asia rom and still get this problem. yeah your case is like mine i guess. other then that, if you find out something else, do lemme know
Sylpheed said:
i also have that problem. been plaguing me for a long long time.
Try a few diff types of roms but make sure they have
1. Start up animation disabled
2. SetAcousticparam in their config file
these 2 are absolutely essential, else your phone voice would be low.
though mine is more or less confirmed to be a hardware problem. if you flash the official HTC asia rom and still get this problem. yeah your case is like mine i guess. other then that, if you find out something else, do lemme know
Click to expand...
Click to collapse
1) done already
2) where is it?
ringtone volume is very low in 6.1 (19209).
well, with PDAViet Rom I don't have WOW EFFECTS in my personal settings. However, I did find in the Artemis forum a small cab to deactivate the WOW Effects.
Since I installed it the problem is gone!
unfortunately that doesn't work for me. i've tried mine with freshly installed cab files, even those from official HTC, with no WOW effects activated. still doesn't work.
Worst still it's a random problem. soemtimes it works, sometimes it dosen't... oh well..
do you have a2dp headset? I have PDAVIET ROM and bluetooth a2dp headset and every time i finish listening to music, turn off bluetooth i have no sound on my device. No alarms, reminders, ringtone, sms notyfications etc. Had this isue in Faria ROM too.
Hey u guys! Ive got a major problem on my tytn. I have a Crc's 10.something last ROM (WM 6.1) and a big BT problem. Ive got it "on" in the comm manager, "on" in windows, both beam options on and that option "allow other devices to see me". Well the problem is that the other devices can only see me if I have the PDA on! I mean, if it is in standby mode, other devices can't find me! It becomes a big problem when I turn on my BT headset and it cant find the phone =(. Is there a way to solve this? maybe editing something on the registry?
try installing schaaps config and turning off all the power save settigns
nothing m8. No can do! everybody else can find their Hermes in standby mode?
anyone know a registry tweak for this?
Solved by removing those saving power options in advanced config
Quit spamming the forums.
Spr0ckEt said:
Quit spamming the forums.
Click to expand...
Click to collapse
actually it didn't work. the bt doesn't go off when I put the device in standby, it takes about 3 or 4 secunds to turn it off... anyway I don't know what to do...help
Have you tried reflashing? I'm using 10.8 and it has no problems at all when it is in standby and a call comes in, or I start a call from the headset while the phone is still in standby.
If it worked briefly by changing the power settings, try doing that, then delete and recreate the partnership before doing anything else, that might work more reliably.
Yes, i already flashed 3 times! But all the ROMS come with power tweaks! My radio rom is 1.48.00.10 e I dont know if it has anything to do with... Its only the BT problem, i can receive calls and messages, everything works! Im using 10.8 either!
another thread!
you are a kind of hopless my friend
whenever you get any problem on your device, and before you try to understand what kind of problem you have, you open your mouth speechlessly, and you go directly "Hermes Mobile 6" instead of "Hermes Accessories" to post a new thread and ask a very sweet sweet question
Advice: UPGRADE -or whatever you may call it- to Nokia, SE, Sagem, Motorola or any non WM based device and forget about all these problems
That's the way it is - if it in standby, BT is off.
No fixes, patches or anything will sort it as that's just the way it is.
Sorry!
Lordsmiff said:
That's the way it is - if it in standby, BT is off.
No fixes, patches or anything will sort it as that's just the way it is.
Sorry!
Click to expand...
Click to collapse
Im not sure thats right because I also have an HTC Prophet and Wizard and they can both be discoverable on standby mode! If it wasn't a possibility then why should the blue led blink in standby mode?
Feel free to disbelieve me and waste your time searching for a solution.
You asked, and I answered.
What you do with the answer is up to you.
Lordsmiff said:
Feel free to disbelieve me and waste your time searching for a solution.
You asked, and I answered.
What you do with the answer is up to you.
Click to expand...
Click to collapse
i now see this is an all hermes issue that hasnt yet been fixed.
Although there are some registry tweaks. Does anyone know of a good one to force the BT to stay on even in suspend mode?
Hello!
I bought a Diamond for a few weeks ago, unfortunately it's not working very well. Suddenly at random the audio disappears, often when a USB cable is connected. The two solutions i've found is to listen to an mp3 song in wmp for more than 5 seconds, then the audio will pop and scratch and then work again. That works 2 out of 3 times, and the other times i have to do a soft reset. I upgraded the rom to 1.93.413.3 SVE (that is the swedish version), radio is 1.00.25.05, SPL-1.93.0000. I contacted HTC and after explaining that i've done a firmware upgrade, they told me that it is a hardware issue. I contacted my retailer, but they've taken over a month without any response. So my question now is, have anyone had any issues like this? Should i try other firmwares? Radio? If i do, can i easily restore everything back so that i can leave it for repair without them noticing? Is it a bad idea? If i brick it, i guess i'm screwed..
I know some of these questions are answered here, but i couldnt find anything about my sound issue, except some SMS sound issues, that is not the same problem i am experiencing though.. Also, if someone calls me when i have no sound, neither me or the one i am talking to can hear anything.
Thanks in regards
Johan
sounds like a Hardware issue, do anything you can to get in contact with the Vendor, Phone calls, emails anything.
try the attached driver + sound parameters.
taken from ATT_RAPHAEL_1.94.19971 ROM
It seems this driver handle 2 new audio setting files that were not present in the diamond:
FilterFile and PreProcessFilterFile
It is a new sound driver tested on my Diamond and working fine, less glitches, better sound but doesn't change the poor hardware HP unfortunatly.
TekTonik said:
try the attached driver + sound parameters.
taken from ATT_RAPHAEL_1.94.19971 ROM
It seems this driver handle 2 new audio setting files that were not present in the diamond:
FilterFile and PreProcessFilterFile
It is a new sound driver tested on my Diamond and working fine, less glitches, better sound but doesn't change the poor hardware HP unfortunatly.
Click to expand...
Click to collapse
Can you provide instructions on how to use and what to insert where in the device (diamond)
TekTonik said:
try the attached driver + sound parameters.
taken from ATT_RAPHAEL_1.94.19971 ROM
It seems this driver handle 2 new audio setting files that were not present in the diamond:
FilterFile and PreProcessFilterFile
It is a new sound driver tested on my Diamond and working fine, less glitches, better sound but doesn't change the poor hardware HP unfortunatly.
Click to expand...
Click to collapse
Hi TekTonik,
I have tried these drivers on my Diamond but it crashes whenever a sound plays. I copied the contents of the OperatorPKG folder to \Windows then replaced the wavedev.dll. I also added the new keys into the registry (FilterFile, PreProcessFilterFile and AcousticFile).
Are you using a cooked ROM with these drivers or did you update them manually? If so, any ideas what I am missing and also which ROM/Radio are using?
Would it be possible to post your registry settings for HKLM\Drivers\BuiltIn\WaveDev please?
The reason why I am trying these drivers is in a hope to fix the infamous sound lag which you can read about here:
http://forum.xda-developers.com/showthread.php?t=412065
Cheers
gardin said:
Hello!
I bought a Diamond for a few weeks ago, unfortunately it's not working very well. Suddenly at random the audio disappears, often when a USB cable is connected. The two solutions i've found is to listen to an mp3 song in wmp for more than 5 seconds, then the audio will pop and scratch and then work again. That works 2 out of 3 times, and the other times i have to do a soft reset. I upgraded the rom to 1.93.413.3 SVE (that is the swedish version), radio is 1.00.25.05, SPL-1.93.0000. I contacted HTC and after explaining that i've done a firmware upgrade, they told me that it is a hardware issue. I contacted my retailer, but they've taken over a month without any response. So my question now is, have anyone had any issues like this? Should i try other firmwares? Radio? If i do, can i easily restore everything back so that i can leave it for repair without them noticing? Is it a bad idea? If i brick it, i guess i'm screwed..
I know some of these questions are answered here, but i couldnt find anything about my sound issue, except some SMS sound issues, that is not the same problem i am experiencing though.. Also, if someone calls me when i have no sound, neither me or the one i am talking to can hear anything.
Thanks in regards
Johan
Click to expand...
Click to collapse
Hi.
I am also having the same problem. bought a new set, but there is no sound in standby after about 10 minutes. whatever i do, the music player, screen taps, sound settings - still there's no sound.
the only solution is a soft reset - but that too, works for ten minutes, and then again the unit goes deaf n dumb.
Have tried the thread above (to remove the lag), but still, no improvement.
is there a solution to this problem? can anybody guide me? please?
gardin said:
Hello!
I bought a Diamond for a few weeks ago, unfortunately it's not working very well. Suddenly at random the audio disappears, often when a USB cable is connected. The two solutions i've found is to listen to an mp3 song in wmp for more than 5 seconds, then the audio will pop and scratch and then work again. That works 2 out of 3 times, and the other times i have to do a soft reset. I upgraded the rom to 1.93.413.3 SVE (that is the swedish version), radio is 1.00.25.05, SPL-1.93.0000. I contacted HTC and after explaining that i've done a firmware upgrade, they told me that it is a hardware issue. I contacted my retailer, but they've taken over a month without any response. So my question now is, have anyone had any issues like this? Should i try other firmwares? Radio? If i do, can i easily restore everything back so that i can leave it for repair without them noticing? Is it a bad idea? If i brick it, i guess i'm screwed..
I know some of these questions are answered here, but i couldnt find anything about my sound issue, except some SMS sound issues, that is not the same problem i am experiencing though.. Also, if someone calls me when i have no sound, neither me or the one i am talking to can hear anything.
Thanks in regards
Johan
Click to expand...
Click to collapse
I have exactly the same issue on my SonyEricsson Xperia X1. I really wonder if that's a hardware issue. What I also figured out: When you do the WM Player workaround have a look at the reception indicator. When the sound comes back my reception is lost for a short time. It seems to me the phone module performs a reset.
No Sound on Diamond
I have the exact same problem, and also in my case it only comes back after playing a music file for more than 5 seconds. Has anyone found a solution yet?
I also have the exact problem above on my diamond. Actually, I feel HTC is really not responsible for their product. Their diamond has been released more than 3 months, till now, still no positive feedback to this.
I AM REALLY DISAPPOINTED ABOUT THEIR ATTITUDE. IF I CAN CHOOSE AGAIN, I WILL NOT BUY ANYTHING ELSE FROM HTC.
I also got this problem
Hope someone can find out whats doing it, i doubt its a hardware issue
mee to
sadly it also happend to me, but I think it happend when the batery y less that a 50 %
I don't understand htc spirit : make a phone with an awfull HP sound !!! what did they do with theyr diamond ? playing chess ? or phoning , really a shame !
jr_daza said:
sadly it also happend to me, but I think it happend when the batery y less that a 50 %
Click to expand...
Click to collapse
nope, with a full battery also
l have trying to find a android rom that Bluetooth and earpiece dose work for our touchpro2 and no answer so far.could someone tell me whether i can find it in roms from xda or neopeek now, or we have to wait?
sharemoon55 said:
l have trying to find a android rom that Bluetooth and earpiece dose work for our touchpro2 and no answer so far.could someone tell me whether i can find it in roms from xda or neopeek now, or we have to wait?
Click to expand...
Click to collapse
BT doesn't work currently on the RHOD. Hopefully soon, just don't hold your breath.
This isn't meant to replace WinMo at this stage. Read, have fun with it, read some more... Pretty much every single major issue has been reported.
..........
I want to contribute to this thread, I am a longtime user of Android on the TP2, I donated to the project when we got sound working.
Basically, I am keeping my fingers crossed for bluetooth to be the next working feature. I can get by without the camera, and the power management, for me at least is fine because I can plug my phone in all the time.
However, my job requires me to be on a bluetooth headset a lot, especially while driving, so that is my only hangup for not using Android 24/7 .
I will reiterate.
This isn't meant to replace WinMo at this stage (maybe never). Don't expect it to be able to.
arrrghhh said:
I will reiterate.
This isn't meant to replace WinMo at this stage (maybe never). Don't expect it to be able to.
Click to expand...
Click to collapse
I have more issues with WinMo than I do with Android, it has replaced WinMo for me personally. The only time I run WinMo is if I need a hands free device.
sizeth3 said:
i have more issues with winmo than i do with android, it has replaced winmo for me personally. The only time i run winmo is if i need a hands free device.
Click to expand...
Click to collapse
then go buy a vibrant or hd2
arrrghhh said:
BT doesn't work currently on the RHOD. Hopefully soon, just don't hold your breath.
This isn't meant to replace WinMo at this stage. Read, have fun with it, read some more... Pretty much every single major issue has been reported.
Click to expand...
Click to collapse
Hi aarrrghhh
Is there an idea when BT would be available/ready?
jonners59 said:
Hi aarrrghhh
Is there an idea when BT would be available/ready?
Click to expand...
Click to collapse
When it's fixed? Until someone with the knowledge steps up and takes the time to troubleshoot it...
Problem is, devs are just like us - they want to work on things that interest them. So until BT is a priority for a dev, it won't get a lot of attention. Seems a lot of focus right now is on framebuffer/graphics performance and battery life (panel init).
There was a lot of work on the camera as well, not sure where that stands - someone was able to get a functional preview on their phone tho.
Basically if you don't have the knowledge to fix it, don't ask when it's going to be fixed. These things don't just happen... Someone has to work at it to get it up and running.
New XDAndroid user, first time poster,
I've been searching through all these threads like mad, and I've discovered that there is NOT, nor is there likely ever to be, a BT working build for Rhodium. I get that, and view the XDAndroid builds as a godsend anyway. Android kicks WinMo's ass, BT or no.
I've also found that there's a buggy headset workaround (that I haven't gotten working yet) but I plan to keep trying. My question is (and I keep searching the threads but I can't find it answered) - does the headset workaround let you use a wired headset to make phone calls? I mean can I both hear and speak through the headset?
Thanks!
bndtdog said:
New XDAndroid user, first time poster,
I've been searching through all these threads like mad, and I've discovered that there is NOT, nor is there likely ever to be, a BT working build for Rhodium. I get that, and view the XDAndroid builds as a godsend anyway. Android kicks WinMo's ass, BT or no.
I've also found that there's a buggy headset workaround (that I haven't gotten working yet) but I plan to keep trying. My question is (and I keep searching the threads but I can't find it answered) - does the headset workaround let you use a wired headset to make phone calls? I mean can I both hear and speak through the headset?
Thanks!
Click to expand...
Click to collapse
Kinda OT for this thread, but try it out - let us know if it does work. I want to say it does, but I don't have a wired headset to test with.
I also never meant to give the impression that BT will never work. Just that it's not actively being worked on (to my knowledge) and won't really get the attention it deserves until a lot of the other work going on right now settles down. It's one of those things, devs work on what they want to work on... sure it sounds selfish but they're doing this for their own personal interest - not because someone else really wants the feature.
So that's the unfortunate truth. Until a dev takes an interest in fixing BT, it's not going to get fixed. Either you can gripe about it not working (which really isn't useful, and I'm not saying you are or you're the only one complaining....), or jump in and try to help!
Doesn't sound selfish at all. Devs needs to do what they're interested in doing. Devs donate their time and skills for fun and for the good of this community, not for some guy who complains that they didn't magically turn his winmo phone into a fully functional android. You want android, buy an android. Anyone who complains about the lack of BT doesn't get this.
Still can't get the damn headset working, but that's my issue. I'll keep reading and working on it.
bndtdog said:
Doesn't sound selfish at all. Devs needs to do what they're interested in doing. Devs donate their time and skills for fun and for the good of this community, not for some guy who complains that they didn't magically turn his winmo phone into a fully functional android. You want android, buy an android. Anyone who complains about the lack of BT doesn't get this.
Still can't get the damn headset working, but that's my issue. I'll keep reading and working on it.
Click to expand...
Click to collapse
if you want the headset to work, put "snd.force_headset=X" into the startup file and replace the x with a 1 for the usb headset and a 2 for the 3.5mm headset. After that, go to you phone in wm and call your voice mail with the headset in the phone. While still in the call, boot into android. It should work for music but i haven't tested calling. Unfortunately, if you do this, then the speaker wont work.
kdub94 said:
if you want the headset to work, put "snd.force_headset=X" into the startup file and replace the x with a 1 for the usb headset and a 2 for the 3.5mm headset. After that, go to you phone in wm and call your voice mail with the headset in the phone. While still in the call, boot into android. It should work for music but i haven't tested calling. Unfortunately, if you do this, then the speaker wont work.
Click to expand...
Click to collapse
Thanks kdub! I've been trying this with 3.5mm headphones, but can't seem to get it working. What's weird is, every time I go back to the startup.txt the snd.force_headset=2 line is gone, and I know I put it within the quotes.
It may have something to do with the advanced settings I put in when I boot XDAndroid. The startup.txt also seems to be different depending on those features, so maybe it rewrites it or something?
bndtdog said:
Thanks kdub! I've been trying this with 3.5mm headphones, but can't seem to get it working. What's weird is, every time I go back to the startup.txt the snd.force_headset=2 line is gone, and I know I put it within the quotes.
It may have something to do with the advanced settings I put in when I boot XDAndroid. The startup.txt also seems to be different depending on those features, so maybe it rewrites it or something?
Click to expand...
Click to collapse
If you use the startup utility, it will rebuild your startup.txt every single time. I think there's a checkbox somewheres in there to enable a manual startup.txt...
arrrghhh said:
If you use the startup utility, it will rebuild your startup.txt every single time. I think there's a checkbox somewheres in there to enable a manual startup.txt...
Click to expand...
Click to collapse
Ah, I suspected as much. Will report back if I get this thing working...
Success! Thanks everyone. By the way, by using this workaround and a cheap piece of hardware called a Bluetooth Adapter (Cardo BTA II), I was able to get Bluetooth on my Rhodium with XDAndroid running. Awesome!
Edited to clarify - the headset workaround DOES work both ways, so you get audio out and audio in.
bndtdog said:
Success! Thanks everyone. By the way, by using this workaround and a cheap piece of hardware called a Bluetooth Adapter (Cardo BTA II), I was able to get Bluetooth on my Rhodium with XDAndroid running. Awesome!
Click to expand...
Click to collapse
Ha, I guess those that really need BT now have a workaround... even if it does involve an additional piece of hardware, haha. Seem actual BT is just around the corner (no promises )
Sounds good but on my rhod100_de i'm not able to activate bluetooth. When i hit it in the settings it only grays out, says "Activating..." for some time and than goes back to previous view (white text and not checked). So there seems to be a little more work for me . I think in about a half year we have a real good android running on our Devices and can kick winmos ass
@Bieka
Nobody said that BT is working. He used an "Klinke Bluetooth Adapter". ^^