Problem with Gprs - MDA III, XDA III, PDA2k, 9090 General

I have a PDA2K italian language with the ultimate ROM.
When the problem occures it is normaly after the GPRS connection has been disconnected for a while, then when connecting again, I get the error "Cannot Connect". The only way out of this is to soft reset or turn ON then OFF "flight mode" (restart radio).
Help Me!!!!

This thread has your anwser
http://forum.xda-developers.com/viewtopic.php?p=129402&highlight=#129402

Sorry Cruzzer but I have not understood as to install patch the my Italian it is not good..... thanks

Hi, I have a WIND SIM and a don't have problem. recently I installed latest Radio (1.13), and no problem found.
Did you try to see detail in 'G icon' and try to 'disconnect' before change connection type?
When you request a new connection, do you change APN?
Ciao, ho una SIM Wind e non ho problemi, neanche con l'ultima versione Radio.
Hai provato a vedere se rimani connesso e provare la disconnessione prima di effettuarne una nuova 'tappando' l'icona G?
Cambi APN quando fai una nuova connessione?
Fammi sapere
Ciao

Related

Anyone using Qtek9090 and Wind in Italy?

As I said in another thread, my phonecalls are frequently interrupted by short breaks. It's an annoying problem as sometimes I miss whole words.
I sent my device for repair but nothing changed.
Recently I swapped my sims (I use a Vodafone sim too, usually with a Nokia 6600) and it seems the problem disappeared.
Anyone having similar problem?
I use my iMate PDA2K (blue angel) with the wind SIM and i don't have problems like your, my ROM version is the 1.40 WWE. Maybe depend of the GSM signal in your place, i live in Firenze and everything is fine. Also with TIM SIM there is no problem.
giovani!!!! maledizione anch'io uso wind ed ho una frega di problemi.... il più odioso è che se ho acceso il wireless, e dopo magari mi sgancio dall'access point ...le telefonate parto arrriva ma niente audio, e dopo devo resettarlo, un mio amico con tim problemi non ne ha
dalamario said:
I use my iMate PDA2K (blue angel) with the wind SIM and i don't have problems like your, my ROM version is the 1.40 WWE. Maybe depend of the GSM signal in your place, i live in Firenze and everything is fine. Also with TIM SIM there is no problem.
Click to expand...
Click to collapse
It may be but I'm not sure. I had no problems with lots of different phones using Wind. The signal strength is full, I live and work at no more than 400mt from a Wind BTS...
ugoloneilboia said:
giovani!!!! maledizione anch'io uso wind ed ho una frega di problemi.... il più odioso è che se ho acceso il wireless, e dopo magari mi sgancio dall'access point ...le telefonate parto arrriva ma niente audio, e dopo devo resettarlo, un mio amico con tim problemi non ne ha
Click to expand...
Click to collapse
Same problem reported when using BlueTooth, due to the improper use of the hands free profile. When the problem happens, try to turn on and off the BlueTooth and see if it solves the issue.
--- Italian ---
Lo stesso problema si verifica quando si usa il BlueTooth, dovuto all'improprio uso del profilo mani libere. Quando il problema si verifica, prova ad attivare e disattivare il BlueTooth e guarda se si risolve.

Updating Problems

Hi Guys,
I have this problem:
My bootloader of HTC P3600 ITA with latest WM5 ROM is:
TRIN100 IPL-5.50
TRIN100 SPL-1.07.0000
the radio hardly attach the line... it is always in searching.
sometime with some reset it goes.
I've tried to update the RADIO ROM but at 7% it always says that the image is corrupted (i have downloaded 5 times ad have the same problem)
so i would like to try with the Dopod ROM so i have to flash the HARD SPL Oli but this also says me that the image is corrupted and to check the update utility.
how i can solve? pls help me!
I have solved the problem of image corrupted and tried to flash my wm5 ROM with the RADIO updated versione 1.46.00.11...
at the end i had a "command line time out" error and i had to reset the device.
no update written.
is like i can't overwrite the radion ROM.... can someone help me?
Thanks
You have need of this program.
Si infatti grazie! l'avevo trovato facendo ricerche.
Dunque il mio problema è questo:
Dove abito prende solo in UMTS (niente GSM) ed il mio 3600 non aggancia proprio la rete con la TIM (con 3G e Vodafone va benissimo).
Andondo circa 300 metri pi lontano del mio palazzo inizia a prendere benissimo e funzia alla grande!!!!
inizio a chiedermi se è TIM che ha problemi con i ripetitori UMTS (visti gli ultimi continui blackout magari qualcuno si è "fulminato")
cmq volevo provare a mettere su la ROM data in dotazione da TIM (magari ha qualche ottimizzazione particolare)
cmq ho su la RADIO 1.46.00.11 che dici va bene o torno alla 38?
Grazie sei uno dei pochi che mi ha risposto.
BYe

GPRS connection

Hello pipl !
Many times a gprs connection automatically start due to email or weather and so on.
There's a way to disable this automatic connection?
Ciao ragassi!
Spesso mi parte in automatico il collegamento gprs, causa email o aggiornamento meteo.
Si può eliminare (disattivare) questa funzione?
Hello, we can close this unnecessary thread: Ervius 3.04 WM6.1 based has this command.

Diamond in 3G MODE the line falls after 2 minutes around

Hi, my diamond with different ROM, also that of Bepe 0.95, when it is in 3G mode, with different dialers (H3G Italy and Vodafone Italy) later around 2 minutes of conversation the phone call is interrupted.
Perfect in GSM mode!
Has someone had similar problems?
problem H3g
ciao anche io ho un diamond di 3 e mi sembra che perda spesso ilsegnale di 3g.
una cosa tu hai provato ad installare tom tom?
macxi said:
ciao anche io ho un diamond di 3 e mi sembra che perda spesso ilsegnale di 3g.
una cosa tu hai provato ad installare tom tom?
Click to expand...
Click to collapse
Please post in english. You're on an international forum...

aiuto errore 262

ciao a tutti, innanzitutto complimenti per il vosto lavoro... però ora mi serve un aiuto.. non riesco a installare nessuna rom, avevo gia fleshiato una volta, ora monto la rom originale 2.03 con olinex 1.40 ma non riesco ad installare cmq nussun'altra rom.. connetto il pda, (DIAMOND) avvio Unsigned-Hard-SPL-Diamond-OliNex, arrivo alla schermata update e poi mi diventa lo schermo del tel tutto nero, activesinc si sconnette, la barra del pc rimane sempre a 0 e dopo un po di minuti mi da errore262... aiutatemi... anticipatamente grazie a tutti...
Google Translation​" hello to all, first of all congratulations for the work vosto ... But now I need a help .. I can not install any rom, I had already flesh once, now monto la rom original olinex 1:40 to 2:03 but I can not install none rom cmq .. I connect the pda, (DIAMOND) start Unsigned-Hard-SPL-Diamond-OliNex, arrival to the screen update and then I become the screen of the phone all black, activesinc it disconnects, the bar of the pc is always a 0 and after some of I errore262 minutes from ... help me ... thanks in advance to all ..."
Maybe someone wanna take a crack at this.​
hello and thanks for the help imatrix, I have done everything as the guide with matty but then I have the same problem ... 262 error .. instead if reinstalling the rom olinex 1:40 I upgrade succeeded. but equally I can not change a rom
which cooked have u tried to install?
how did you install it? via ActiveSync or Internal Method?
I tried to install any rom and I tried to install only with active sync, the other does not know

Categories

Resources