Hey guys,
I searched here and at pdaphonehome. I know this has been discussed but can't find anything at all.
Anyways, I have an audiovox 6600 (rebranded Blue Angel, right?) bought from Bell Mobility (canadian CDMA provider). My main line is now with Fido/Rogers, as Edge is much faster than 1x.
Everytime I try to make the ppc see the phone as a modem, it says the service is not found on the phone and please enable it then retry again. I don't get it, since the V3 is capable of being a BT DUN modem for a laptop.
Are there any drivers I need to download to make it work on the PPC side of things?
I just went on http://asukal.seesaa.net/article/1031857.html
but that pretty much killed all my audio and I have no more BT wizard. Im back to square 1 (hard reset)
Anyways...any help would be greatly appreciated!
Related
Hi there, I currently am stuck to using the TMO UK 1.20 rom due to the fact the the WM5 Blackberry Connect client does not work on AKU2, but I noticed that TMO have taken out WCDMA in the drop down box in the phone options. The only things one can choose now are AUTO and GSM.
Any clues on how to get WCDMA(UMTS) back? Is there a registry setting that could be put in?
Following Buzz's installation instuctions I am stuck with these two items.
9. Activate Radio even without Sim in it saying something about no Sim)
15. Flash your original Radio ROM. Do not upgrade the bootloader until you restored an original radio rom.
I think I am just about there with number 15 (with the resource on this site) but can not find anything on #9.
I know a lot of people say that it is already unlocked, but it seems unlocked to a few networks.
Regards
hi, XDA Execs should be unlocked
Does it ask you to enter the unlock code if u enter another sim?
If it doesn't then it's unlocked as far as i know.
What makes you believe that it's locked to a few netwroks, maybe it's because you're trying to find a non-existent umts signal...
Turning the radio on means turning flight mode off (and for the purposes of unlocking you do that without a sim)
Hope that helps.
I take it the UMTS is another name for 3G. My BT account is a normal non 3G account. Is it a case that I need to alter some of the settings, the networks it lists are...
@VF-UK
@ O2-UK
@ Orange
Is ther anything I should try....
umm, what happens if you insert a non-o2 sim into your phone?
If it's continually searching for a signal, it might be trying to search for a dodgy 3G/UMTS signal
in which case try going to phone settings, then in the band tab , select GSM instead of auto or wcdma
In the worse case scenario, if/when you flashed the radio 0.00.00, you might have had some problem with your USB (See the unlocking thread)
Thanks for all your help.
I think I have now got to the bottom of this. The fact is that BT use the VF network. The phone logs onto this, so I guess this is normal. However the signal strength never gets above 2 bars, is this normal?
mrfirepro said:
Thanks for all your help.
I think I have now got to the bottom of this. The fact is that BT use the VF network. The phone logs onto this, so I guess this is normal. However the signal strength never gets above 2 bars, is this normal?
Click to expand...
Click to collapse
As far as i knew BT always used o2????
however....you got to upgrade you radio version after unlock is having probs.....
BR
agent003 said:
As far as i knew BT always used o2????
Click to expand...
Click to collapse
Not anymore, dude. BT sold BT Cellnet (now O2 plc) a little while ago, but now they have started their own mobile service again (called BT Mobile) BUT piggybacking Vodafone's network.
hey guys, newbie here
i went throught the forums but didnt really find an answer to my problem with the TP2
my TP2 looses connectivity to the network pretty often. even though it shows a good connection to the network and i have good signals, i cant make calls or send sms until i switch to Airplane mode and then back to Phone mode. i read on the board that this problem might be because of the phone trying switch between 3G and GSM, so as they suggested i made the default network band as GSM and im still getting the same problem. plus from the past few days, i have pretty much stopped recieving international sms, which can get pretty fustrating if your girl is in another country
also i been looking for a way to reset the network settings
just for info, i am still running the with the original WM6.1 that came with it. th only updates have been for the radio version (gps thing) and sms hotfix
ROM : 1.19.415.1 (51489) WWE
Radio: 2.46.25.30
the network im on is Etisalat (3G network)
any help would be really appreciated
anyone
Hello,
Im from Mexico, I just buy a HTC Touch Pro 2 Sprint version, Im going to use it with a GSM carrier (Telcel), everything is fine, but everytime I reset the device, when it starts it tries to activate Hands Free Activation, User Profile, but it displays an error: "cant connect to network" Error 1020.
How can I remove this? what is the use for that?
Sorry for the bad english, thanks in advance
the sprint tp2 is a cdma device but does support sim cards since sprint sells it as a "world phone".
So you can put a sim card in it, only problem is sprint has it so it blocks US bands. If the mexico carriers use the same bands as the US carriers then i'm not sure how to fix that. Maybe flash a custom rom?
as for the handsfree, i'm not sure but check the mini-USB connector on the bottom of the phone, see if the pins are alright and not busted/touching each other, also check the headphone jack and make sure nothing is in there.
The cellphone works fine with Telcel carrier, te problem is that when I softreset the phone, after loading touchflo3d, it tries (I suppose) to connect to Sprint webpage and update a user profile, but since I dont use this nor Im going to register, I want to know how to disableit or modify the registry so it stops trying.
Thanks for the help
Oh, I almost forgot, Im not using any handsfree device, I havent configure any.
hello All,
I got a AT&T HTC touch pro 2 (tilt 2) from my friend who had got it unlocked from AT&T as he got upgraded to a new phone. I am using a t-mobile prepaid on the touch pro 2. I have got couple of issues with it.
1. The UI responds very slowly.
2. The data connection icon displays E. When I called up the t-mobile customer care they response varies a lot. One says i need to unlock the device from AT&T and others says i will be able to use only Edge as its not a device provided by t-mobile.
3. The GPS doesnt seem to work. When ever i used Bing. It says that its not able to connect.
I have a request is there any customisable rom that would help in over coming these issues.
Regards,
Mahesh
Same here, but other way round
I have a T-Mobile TouchPro 2 I've been using an AT&T SIM in, and I can tell you exactly what's up- The ROM is probably trying to refresh stuff in the background and it's not working because it's expecting an AT&T SIM. Try another ROM. As far as 3G, not gonna happen. T-Mobile's 3G runs on different bands than the AT&T 3G. The T-Mobile SIM wouldn't even start up the phone if it wasn't unlocked. And I think the GPS settings might be wrong, try fiddling around with the COM ports in Settings, but make sure you make a note of what they were before. I'd recommend a custom ROM, not to solve the problems you speak of necessarily, but it runs a lot faster, and won't have all the AT&T bloatware that's kinda useless to you. Oh, and if you don't have Connection Manager setting everything up for you in your ROM, make sure you set your APN.