Related
Update: The v2 resolves the "cannot add video track" with the camera app and the crashing with .3gp files.
ftp://xda:[email protected]/Uploads/Blueangel/WM5_ArcsoftMMSv2_From_Universal.CAB
Well it works, you need to have the second patched version from mamaich, and do a softreset after installing the cab..
For people with other devices just follow the instructions bellow..
----- OLDER STUFF BELLOW -----
Ok, here are the files
Unzip windows to \windows
My Documents to \My Documents
Then go to the messaging application if you don't have a mms folder create a new account with dummy users etc at the end on the type choose MMS (this is a hack and you should only have one account of this type)
Configure your mms as normal and your set to go..
There's some extra files that hymalaia users don't have, so when you are copying \windows you don't need to say yes to overwrite (but the files on the zip are newer than the ones on our BAs)
Bugs:
1) When you try to add a .3gp file or view a folder with .3gp files it crashes.. (I have overwriten my \windows files, you can try not to do that and see if it gets better)
2) You can't add a photo directly from the camera
If you get an error about buffer overflow just replace rcdll.dll with rcdll_original.dll also on the rars.
Update: Replace rcdll.dll from \windows with the one in rcdll.rar (After you install all the other rars)
Update: Install the .reg FROM MMS.rar and not from the other rars, using a registry editor (kilmist or tre work fine)
Thanks for the files. I have a few of questions though:
1. Have you managed to send and receive MMS using the registry setttings you posted?
2. Does everything message realted still function properly after putting in the registry settings?
3. Does it work like the old ArcSoft MMS client for 2003?
4. What do you mean by "there's something missing"?
Thanks in advance.
By something missing i mean that it doesn't work and theres more stuff needed :>
Ok, got it. Thanks again
Sorry, just curious on how you extracted the files and the registry settings. You think its still as before where it comes as a CAB in the extended ROM, and you think you can get the CAB file itself?
I got the files from a user at universal forum, and they don't have a way to open the extrom
Ok we have MMS working at Himalaya and at Blueangel
But there's some problems with the icon resolution, as soon as i patch all the dlls i'm going to post the files
ncruz said:
as soon as i patch all the dlls i'm going to post the files
Click to expand...
Click to collapse
Pls post the link here once ready
Re: [WM2005] MMS Client Inside WORKING!
i tried your steps, it did not show the mms configuration options still, and i created another account, as well not shown even complete all the steps.
kumar00455 said:
ncruz said:
as soon as i patch all the dlls i'm going to post the files
Click to expand...
Click to collapse
Pls post the link here once ready
Click to expand...
Click to collapse
Their ready check the first post
Re: [WM2005] MMS Client Inside WORKING!
Removed
Re: [WM2005] MMS Client Inside WORKING!
ncruz said:
khiann said:
i tried your steps, it did not show the mms configuration options still, and i created another account, as well not shown even complete all the steps.
Click to expand...
Click to collapse
Have you softreseted?
If yes, use this .reg file with kilmist reg editor, i think that's the problem, TRE complaints about a string too long
Click to expand...
Click to collapse
Same here, don't work even with the new reg file ...
Have you checked that the registry is changed?
The same for me... I have followed the instructions but when I wanted to create an MMS account and went through the wizard nothing "visually" changed. But apparently, the account exists somewhere inside because when I wanted to create another one (with the same name) thy wizard warned me that the account already exists... Any ideas...?
Remark: When I used the kilmist regedit I noticed that the default values (marked with @) weren't imported. I had to enter them manualy as REG_SZ values with 'Default' name... Could be that a problem...?
VavrinaL said:
The same for me... I have followed the instructions but when I wanted to create an MMS account and went through the wizard nothing "visually" changed. But apparently, the account exists somewhere inside because when I wanted to create another one (with the same name) thy wizard warned me that the account already exists... Any ideas...?
Remark: When I used the kilmist regedit I noticed that the default values (marked with @) weren't imported. I had to enter them manualy as REG_SZ values with 'Default' name... Could be that a problem...?
Click to expand...
Click to collapse
Do you see the Menu->MMS Configuration?
The only thing that changes when you add an account is that at the end you choose MMS instead of POP3 or IMAP (at step 5) fill something at the other steps, they aren't used
No... No at all... The menu doesn't contain such item...
Removed: see first post
Ok. It works... Thanks a lot for help. Because I did not see any MMS accounts previously I created two different MMS accounts... Is there any way to delete one of them...?
VavrinaL said:
Ok. It works... Thanks a lot for help. Because I did not see any MMS accounts previously I created two different MMS accounts... Is there any way to delete one of them...?
Click to expand...
Click to collapse
You're lucky ... always nothing for me.
VavrinaL said:
Ok. It works... Thanks a lot for help. Because I did not see any MMS accounts previously I created two different MMS accounts... Is there any way to delete one of them...?
Click to expand...
Click to collapse
Going to menu -> tools -> options you can't delete it?
OEM supplied by Schaps. This version already integrated in his last ROM.
Not like previous version, this version Profile Tab already work correctly. No need to do anything. I have use it for several days and I dont notice any notifications queue issue or wild vibrate at all.
But I do change the following:
-Installation directory change to \HTCHome instead of \Windows
-To get Brightness shortcut working, the same patch as previous version applied.
-The same patch applied to enable the Tab Setting through registry.
Other than that Nothing. Much better version than v1.5
Color version uploaded!!!!
If you are ROMcooker, download the htchome.dll for rom cooker .
Install sdkcert.cab if you have not done so.
There are about 100 pages of discussion about v1.5. Lets not repeat what have been discussed over there like: Clicking left most mail icon will take you to MMS, how to change music tab tolaunch HTC Audio Manager, and so on and so on. I dont plan to follow up closely on these thread as I think this version is very good already. Should there be any fix, change, etc please refer to the respective post.
Enjoy
Is this better than the one you had released with your kaiser skin?
Currently i am using that, is it worth me updating?
Thanks
Bennec, the one you are using is v1.5.xxxx. Very earlier and uncomplete version that has been tweaked to make it reliable enough to be used. This version is a new build with the profile tab working and additional features in the contact tab thatenable you to select what number ina contact for the speed dial. Definately worthed.
Can you post a version where the files do go in the windows directory? I want to cook this in, but not have duplicates.
TooSharp said:
Can you post a version where the files do go in the windows directory? I want to cook this in, but not have duplicates.
Click to expand...
Click to collapse
you can, just use windiff on the SYS and OEM folders of your kitchen, the dump folder is created by processing these 2 folders, so any file dups will be in there BEFORE you run buildos.exe.
add you package, then run windiff ont he SYS and OEM folders, it will find the file duplicates, and delete the ones that ARE NOT from your new package!!
bennec83 said:
you can, just use windiff on the SYS and OEM folders of your kitchen, the dump folder is created by processing these 2 folders, so any file dups will be in there BEFORE you run buildos.exe.
add you package, then run windiff ont he SYS and OEM folders, it will find the file duplicates, and delete the ones that ARE NOT from your new package!!
Click to expand...
Click to collapse
Maybe I should have been more clear.
When creating a rom, all files will be placed in the windows directory, if you need files in a different directory like the cab posted above you will have to use initflashfiles which just copy the files to a new folder, then you will have duplicates. I just don't want 2megs of photos in two spots.
Garphical Anomolies
@schen you need to swap some of the icons for my fixed ones!!
please Download this Original Icons Fix and add it to you package. 2 of the black and white icons (Music and People) dont react properly when you select them.
that link fixes them!! (it is not just yours, it is a common problem with all htc home plugins!!!)
TooSharp said:
Maybe I should have been more clear.
When creating a rom, all files will be placed in the windows directory, if you need files in a different directory like the cab posted above you will have to use initflashfiles which just copy the files to a new folder, then you will have duplicates. I just don't want 2megs of photos in two spots.
Click to expand...
Click to collapse
Your question makes no sense then!
When you COOK this in obviously you would remove the version you already have in the ROM therefore you would not have the duplicates.
Also if you just created an package out of the cab above you will get NO initflashfiles therefore the package will install to the windows directory!!!
bennec83 said:
Your question makes no sense then!
When you COOK this in obviously you would remove the version you already have in the ROM therefore you would not have the duplicates.
Click to expand...
Click to collapse
You still don't understand. My problem is NOT buildos failures. I don't want duplicates when the rom is complete. Any time you use a initflashfile you will have duplicates in the finished rom. That is what they are for. Again the problem is not with duplicates in the OEM and SYS. If you go back and check my posts you will see I helped you with this exact problem. I know how to create a rom!!!! What I don't know how to do is edit the dll file to redirect it to look in the windows directory for the png files. Hence why I'm posting.
bennec83 said:
Also if you just created an package out of the cab above you will get NO initflashfiles therefore the package will install to the windows directory!!!
Click to expand...
Click to collapse
Yes you do get a initflashfile that copies all the png files to HTCHome. See attached.
schen, installed & everything working fine, except for one, am unable to use the hardware navigational pad when accessing music tab, from there u can't proceed to go up, go to ff, rw or play button.
Touchscreen function (for all of the above ff, rw & play tabs) in music tab is working though.
thanks anyway.
TooSharp said:
You still don't understand. My problem is NOT buildos failures. I don't want duplicates when the rom is complete. Any time you use a initflashfile you will have duplicates in the finished rom. That is what they are for. Again the problem is not with duplicates in the OEM and SYS. If you go back and check my posts you will see I helped you with this exact problem. I know how to create a rom!!!! What I don't know how to do is edit the dll file to redirect it to look in the windows directory for the png files. Hence why I'm posting.
Yes you do get a initflashfile that copies all the png files to HTCHome. See attached.
Click to expand...
Click to collapse
Funny, i created the package and i didnt get that!!!
il have to look into the flashfile generator in using (im not using the core one that you are!!)
Thanks for the heads up and apologies for the confusion!!!
bennec83 said:
Funny, i created the package and i didnt get that!!!
il have to look into the flashfile generator in using (im not using the core one that you are!!)
Thanks for the heads up and apologies for the confusion!!!
Click to expand...
Click to collapse
No problem. Thanks for the help. Sometimes it's hard to convey what you are thinking in words, especially about something so confusing.
TooSharp said:
No problem. Thanks for the help. Sometimes it's hard to convey what you are thinking in words, especially about something so confusing.
Click to expand...
Click to collapse
Well then my answer to your question would be to remove the initflashfile, then everything would get installed to the windows directory and since you have no need for shortcuts, this would be fine!!!
been using this for a while and saw the new version a while ago. has option of more when u go to the 4 day detail in weather. fonts seem nicer and all. looks like a good upgrade to 1.5 Bennec83 irc bro
schen said:
OEM supplied by Schaps. This version already integrated in his last ROM.
Not like previous version, this version Profile Tab already work correctly. No need to do anything. I have use it for several days and I dont notice any notifications queue issue or wild vibrate at all.
But I do change the following:
-Installation directory change to \HTCHome instead of \Windows
-To get Brightness shortcut working, the same patch as previous version applied.
-The same patch applied to enable the Tab Setting through registry.
Other than that Nothing. Much better version than v1.5
I will create a separate Cab based on Schaps color version as well in a minute after a few try this cab with no problem.
Enjoy
Click to expand...
Click to collapse
Thank you for the new version, and tab setting is essential. Thanks again!
bennec83 said:
Well then my answer to your question would be to remove the initflashfile, then everything would get installed to the windows directory and since you have no need for shortcuts, this would be fine!!!
Click to expand...
Click to collapse
Just tried that. It doesn't work without the png files in the HTCHome directory. I guess we can't have everything.
The special dll for installing n Windows directory uploaded. Use that dll.
On the subject of weather plugin.
I am not sure why is there a need for a pre-configured xml file. Anyway, you need a gui to choose the city. Why not have a gui where you could enter the data which is stored on xml file. I suppose rather than sending an entire xml line when communicating with xml service, build an xml file base on the data entered via gui.
As I understand it, the DLL was just edited using a hex editor as \HTCHome and \Windows has the same number of characters, it sounds like it wasn't a decompile thing or something like that.
I'm not at home at the mo so I can't check but if you load the DLL up into a hex editor (winhex?) then replace all the \HTCHome text with \Windows, you should be good to go.
This is just my uderstanding though of what I've read in the previous....saga
Smiffy.
schen said:
The special dll for installing n Windows directory uploaded. Use that dll.
Click to expand...
Click to collapse
Thanks for the fix!!
I'm looking for a good editor (free preferred) that would run on the PPC. Word is fine for many things but I don't want to be restricted to the .doc, .txt etc file types (specifically I want easy access to skin.xml files for editing on the PPC).
Can you suggest a good editor? I'm having NO luck today searching for one. I was directed to PPC_Edit and it works fine EXCEPT that it will not browse outside the predefined file structure to where I saved the Skin.xml file
Or how do you change Word to see all file types?
Thanks,
NK
Do you mean a text editor. If so, you might look into Pocket Notepad, found at http://tillanosoft.com/ce/pnotepad.html. To see more files than the normal file dialogue box gives you (although it won't work with Word, Excel, or Powerpoint), look for the file dialogue changer. You need to have "gsgetfile.dll" in the Windows directory for it to work.
PocketNotepad did not work for me :-( And it does allow browsing all file structures.
The "DEL" anf Backspace do not work correctly on my PPC (WM 6 Maglite version on Axim X50V).
NK
UPDATE: I rebooted the PPC and it works now. Wow ... self correcting software ...Cool
You could always connect it to a PC and use a PC editor to edit.
Alan
CKE (http://www.animaniak.com/cke/cke_main.asp) is the best text editor I have found for the PPC. It has syntax highlighting and many other useful features. Give it a go.
Cheers
Mark
***CHANGE LOG START
2009-09-23
- New:file preview (please note that cou can even preview manila encoded images inside cab file, since they are converter internaly!)
- in preview you can choose to extract manila file or PNG image.
- bug fixes, cosmetic changes... new bugs ...
- you probably realized that I publish versions I got at the moment - raw, not too much tested, relative big changes from day to day, version is detected by the pub date... so expect new staf soon...
- !!! IMPORTANT !!! Please download cfc.exe and put it at c:\windows\ "c:\windows\cfc.exe" !!! Download last version from http://forum.xda-developers.com/showpost.php?p=2798441&postcount=1 !!!
(without cfc.exe app won't be able to decode mailla images)
2009-09-22
**IF YOU HEVE BEEN HERE PLEASE READ THE WHOLE POST SINCE IT IS ALL UPDATED!!!
- "Cab Album" support:
A Cab Album is collected information about many Cab files in one place.
Application will here "create" a new Cab Album by scaning folder. (It is possible to include subfolders in search path.)
Since creating a "Cab album" could be time consuming (depends on how many files it has to scan),
collected information - an "Album" can be saved (in xml structured file).
So next time, you can just use the same information by "loading" a saved album from disk (without scaning again).
Creating album is the process that will
a) detact all *.cab files in scaning folder (and subfolders)
b) for each found cab, program will try to locate "_setup.xml" within .cab file and extract information about real / target file names and paths
c) all information will be collected to memory
After that you will be able to
a) browse an album by cab files (from the tree)
b) browse an album by target file names (also from the tree where these files are grouped an counted)
c) search / filter the album by target file names
Also you can
a) click on "save" icon to save the album.
b) double click on cab file (lef side - tree) to open separate window tith that cab info
c) double click on file on the right side to extract it on disk
2009-09-21
- new version suports drag & drop files (from windows explorer)
- small cosmetic changes
2009-09-19
- first published version
***CHANGE LOG END
DID you ever try to find some fine resource (manila file, bmp for phone skin ... or whatever), which you know you have seen somewhere. And you are sure you got it somewhere on your hard or stick or ....
DID you ever wanted to create a new skin based on a few existing skins in some cab files.
DID you ever ask yourself - what will that XY.cab install on my device? Will it remove parst of my customization that I don't want to be changed?
In case you didn't this app is probably NOT for you.
But if you DID then you probably know that
a) most cab extractors will NOT extract files with the correct filenames on your hard disk.
Instead of some "5acc5861_manila" that will be installed on your device, what you get on your pc is some file named "0CABA635.001".
The real target file name "5acc5861_manila" is actually set in _setup,xml which is part of cab file for mobile device.
b) it is hard to find all "5acc5861_manila" resources on your hard disk without decompression of all cab files, and fixing a problem described before - see a
What do you think about a new point of view - an "Album" view.
Album view will help you to "scan" your hard disk folders, searching for cab files, extacting information from them (without extracting cab files on disk), and collecting all important information in one Album list.
That's not all.
Since "scanning" or building an album could be time consuming, you can "save" the album (xml file structure) so next time you just open existing album and you got all information very quick.
You can search albums - for example "Assets*.bmp" will find all files located in album containing dialer skins.
With another few clicks you can extract found files on disk and use you favourite tools to view or edit them.
Prease note tha this application is extended version of
"[APP][v2009-09-17] Cab utility - RENAME cab content/files to normal target names" located at http://forum.xda-developers.com/showthread.php?t=561533
Requirements: .NET framework 3.5 on your PC
BTW: If someone know some good .NET library for converting / previewing or updating _manila files please do let me know.
Also if someone would like to use some of functionality of this app in other projects ... I will be glad if I can help providing details about my libraries.
I hope you'll like it...
Weeeeeeeeeeell
Awesome thank you!
UPDATE
Missing drag & drop support was anoying, so I add it to v2009-09-21.
You can find / download new version in fist post
cablib error
I get an error when opening a cab-file:
FileLoadExeption
Could not load file or assembly 'Cablib, version 10.3.0.0 ... or one of its dependencies. This application has failed to star because the application configuration is incorrect. Reinstalling the application may fix this problem. (Exception from HRESULT:0x800736B1)
cc62 said:
I get an error when opening a cab-file:
FileLoadExeption
Could not load file or assembly 'Cablib, version 10.3.0.0 ... or one of its dependencies. This application has failed to star because the application configuration is incorrect. Reinstalling the application may fix this problem. (Exception from HRESULT:0x800736B1)
Click to expand...
Click to collapse
Yes in some systems you can get this error. On my laptop I have no problems but on my home PC I had exat the same error.
What I did to solve this problem is to replace version of CabLib, and also I put 2 dlls in the same folder where is application.
You can find CabLibFix in additional attachment in first post. Just put those files in the same directory (replace existing CabLib + additional 2 new files).
Please do let me know if that helps
Could not load file or assembly 'Cablib
Please note that v2009-09-22 should fix problems with error "Could not load file or assembly 'Cablib.." on some systems.
"FIx files" are included in that version, so I removed "fix..." archive.
However if you still have problems please do let me know,
thanks
v2009-09-22
v2009-09-22 works like a charm.
Thank you again
v2009-09-23 now has image / text preview + info about manila type of file (xml, SQLite, Lua_Script, Mode_9 ...)
Also you preview manila IMAGE files (decoded using cfc.exe to png)
The only inconvinience is that I manage to hardcode path to cfc.exe ( "c:\windows\cfc.exe").
Sory!
Error on win64 with an 'any CPU' build
Hi
We are using your CabLib.dll v2009-09-23 to load cab files inside our c# application. It works really well, except for one case.
When we build the application for target 'any cpu' and then install on a windows xp64 machine, we get an error message:
System.BadImageFormatException: Could not load file or assembly 'CabLib, Version=10.3.0.0, Culture=neutral, PublicKeyToken=5c838b77b53f84a0' or one of its dependencies. An attempt was made to load a program with an incorrect format.
File name: 'CabLib, Version=10.3.0.0, Culture=neutral, PublicKeyToken=5c838b77b53f84a0'
Everything works fine when we change the target to 'x86', but that then causes problems with our test suite. The 'Any CPU' build only fails in x64 machines.
I was wondering how you build your DLL and if you have any ideas to help us fix this problem.
Here's my config:
Microsoft Visual Studio 2008
Version 9.0.30729.1 SP
Microsoft .NET Framework
Version 3.5 SP1
The build and test is on an xp64 SP2 machine.
-- update --
I've also found that aiCabExplorer.exe has the same problem on my win64 machine. I see you are including the 32 bit C run time DLL's which you provide in the release - that appears to be the problem, as the OS is trying to dynamically link against the 64 bit version of MSCOREE.DLL, KERNEL32.DLL, OLE32.DLL and OLEAUT32.DLL and doesn't like mixing them up.
So the solution, I think, is for you to build without explicit dependencies on the 32 bit libraries. Is there any chance of getting a version like that?
Thanks,
Mark
Hi,
I use this app all the time.
Super duper.
Thank you very much.
Keith
Seems great Gonna try it
Hi,
I want to share small PC tool - FindDup. I have made it several years ago, as I wanted to know how much disk space is wasted by exactly the same files.
The main feature of this program - it compares all the files in given folders binary and it can found duplicates even if the names of files are different.
I use it now to optimize size of my ROM.
For example - you can see there are 298 junk files, total wasted size 1,56 mb in dumped Mega OEM packages.
HOWTO use:
1. Add folder to "Look in" list. You can use drag'n'drop.
2. Select "Search \ Start" from menu, or click "Start" icon on the toolbar.
3. If there are duplicates - you will see them in a list.
Known issues:
1. It looks like it cannot save result to file under XP. I have made it for Windows 2000 and I need to find sources to fix this...
Download link: FindDup
thanks!
just started cooking, will try to find duplicates on my rom!
Be careful. This tool just give you information. You must to know how to use this information.
For example: Ervius Kitchen copies all the files to "temp" folder. It's OK to have duplicates in temp and for example SYS.
But if there are duplicate Manila resources in dump folder, may be you can edit HTCHomeSettings.xml to reuse one file and delete other.
serfer222 said:
Be careful. This tool just give you information. You must to know how to use this information.
For example: Ervius Kitchen copies all the files to "temp" folder. It's OK to have duplicates in temp and for example SYS.
But if there are duplicate Manila resources in dump folder, may be you can edit HTCHomeSettings.xml to reuse one file and delete other.
Click to expand...
Click to collapse
yes,thanks. just want to have a look if there are duplicated files in some packages, not to delete everything your tool will find.
steph