Please help me, my xda iis cannot connect to my office wifi network, after i enter wep key, the status showing 'connecting..' but then it change back to 'scanning..' seem like nothing happen. no error message or anything
This may help!
http://forum.xda-developers.com/viewtopic.php?t=25985&highlight=mt+wifi+guide
Related
I have been trying to login Messenger Live with Wifi...but it always use gprs instead when my connection is active...
and even my gprs is on...its times out..saying that i need to find a place for better connection and so on..
but why it doesnt connect directly using wifi??
Is there a way to fix the issue? it never happen with wm5's msn
Thanks again
Mike
when the gprs bubble pops up... press cancel.
then it uses wifi. problem fixed. why it tries gprs by default i would assume is due to mobile.
once i cancel works perfect over wifi until i move out of range.
I'm using Black 2.0 and changed the connection settings to 'Work network' (settings-connections-connection-advanced-select networks-my work networks) now I dont get the annoying gprs connection trying to start, just uses the wifi I have set up. Let me know how that goes.
dear all...thanks for the great help
falum...i did ur setup and i dont have the gprs pop up again...many thanks
but the other issues comes in...it often say that i cannot connect..(even when i was on gprs)...do you have the same problem beforee??
Im using the live version that is cracked (no time limited) that i download from here..im really confuse to which version i should get (since some said it expired)...
if its possible...can you direct me to the thread to the correct one??
Thanks again!
Mike
Ok.. now that ive had time to cool off, here is the problem.
I work at a University. On a laptop, connecting to the Wi-Fi is a fairly painless process. Its a secure network, so it requires us to use our credentials (ie, our network login/pass phrase) to even connect to the Wi-Fi. Note that when i say pass phrase, that means its farily longer than a standard password. My own is somewhere in the neighborhood of ~20 characters.
The problem with my Touch Pro 2, lies in the final process of connecting to this network, where it will ask me for this information (login, password, domain). I get about 6 characters of my password in, before it pops up a message saying "Unable to connect", as if it thought i was done typing and went ahead and tried to connect.
Heres more info.
Auth: WPA2
Encryp: AES
EPA type : PEAP
Ive tried using Portrait keyboard, Landscape keyboard, and hardware keyboard.
edited for more info.
Seriously? NOBODY else has had this problem?
damn
my touch pro2 has this problem,too
anybody help us
I have connected to 3 Wi-Fi' with passwords of 8-10-12 characters and have no problem so far. Try making sure wifi is off before connecting??...Tj
TrekkerJmm said:
I have connected to 3 Wi-Fi' with passwords of 8-10-12 characters and have no problem so far. Try making sure wifi is off before connecting??...Tj
Click to expand...
Click to collapse
umm.. then how will i see the network?
The issue is, in the way it asks for it. Its not something i can make a cert or something i can type before hand. Only thing i can do is try to connect, the Network will then ask me for a log in. If i manage to get it typed in, in time, i can save it and it will hold for a bit, until something happens like the network goes down. Which then, removes the saved log in, and i have to do the whole dam process over again.
No problem here and I use 20-character network keys on my WPA or WPA2 encrypted wireless networks (I manage or maintain several of my friends or clients networks)
Can you add and configure a connection to your network by pretending it to be a hidden network (non-broadcasting SSID)?
changing to hidden didnt work.
Ive also tried going into the Advanced settings, and on the LEAP tab, entering in my information manually, but when i do that and try to connect, it attempts to, then stops, tried to connect to a saved network that isnt in range, then stops like it didnt find anything.
LEAP - you need to configure to a domain network?
How did you try configuring for a hidden network?
Mesquire said:
LEAP - you need to configure to a domain network?
How did you try configuring for a hidden network?
Click to expand...
Click to collapse
Aye, we use a domain, and i have that info typed into it.
I just went though the network settings and check the box that it was a hidden network?
still having this issue. Trying to use the Enroll section by typing in my creds doesnt work, as it just tries to connect, sits for a second, then disconnects. At some point id like to try a cooked rom, but not gunna do that for a while (least till i read over it a couple more times) and even then can't guarantee the new rom wont have the same problem.
Any other suggestions?
bump-bump-bump
nobody know how to fix this hua
Anyone have any new info about this? i still cant type my password in fast enough..
Is their anyway to get it to WAIT for me to hit connect before actually trying to connect?
Hey guys, so im running the energy ROM on my tp2 and it works great, however I have problems connecting to secure wifi sometimes. WIFI Monster says I am connected, but Im really not. When i try to go to my comm manager and connect I get this message "Pocket PC Networking: Cannot obtain a server-assigned IP Addres. Try again later or enter an IP address in Network Settings."
Any advice? How do I go about finding a suitable IP address? I tried to renew it in the Advanced options from the Comm Manager, but it didn't work.
Noob in need of some help please thanks!
is there anyway I can connect my phone the internet through my computer? that could partially solve my problem. I tried using internet sharing but it says you need to tmobile data or tmobile internet as the Connection source (ie not the computer)
khoyifish said:
is there anyway I can connect my phone the internet through my computer? that could partially solve my problem. I tried using internet sharing but it says you need to tmobile data or tmobile internet as the Connection source (ie not the computer)
Click to expand...
Click to collapse
Yeah...when you're connected via USB/Activesync you can use the PC's data connection on your phone, you just have to enable that option in activesync or WMDC, whichever you use. The option is just labeled "allow data connections when connected via USB"
Much thanks Sir Phunkee haha
khoyifish said:
Much thanks Sir Phunkee haha
Click to expand...
Click to collapse
No prob...it's something commonly not known with new users
On your original problem connecting to a secure wifi network...did it give you the screen where you enter your network password? And is this a network at your home, or..?
Gee, thanks! But the first time it did (its my home network). I set it up to automatically put the WEP Key in and it rarely pops up anymore. When I try to connect at my school it never drops, if it does, I went out of the range of the wifi.
Also, I just enabled the data connection and it worked. Sweetness!
I just reflashed my phone to the New Energy ROM and it connected to the internet first try. Hopefully this is a pattern
EDIT: Im not sure if I would liek to keep it this way because it was really glitchy :\ ugh
khoyifish said:
I just reflashed my phone to the New Energy ROM and it connected to the internet first try. Hopefully this is a pattern
EDIT: Im not sure if I would liek to keep it this way because it was really glitchy :\ ugh
Click to expand...
Click to collapse
Well at least you've proven that it's not a harware issue, and it's possible to get it to work. Before you think about flashing back to stock or another ROM, first go through all related settings and take note of what the NRG ROM set them to, it may just be matter of duplicating them all again when you get a ROM on there you're happy with
thanks for everything! its much appreciated.
Tried this with my home network. I've enabled data connection and used the HEX key to enter code successfully, but I always get error, "Could not locate remote server" when trying to connect to any website. Can someone please help me with this issue? Thanks.
Hey guys,
I have search the internet, but i cant find a fix for the following problem! Hopefully someone can help me!
At my university (University of twente) they use a 802.1x eap security, with TTLS, and pap as second authentication. I can connect to this network, but after a minute i cannot use the wifi connection anymore (so i cant go on the internet/market etc). However, the phone indicates that it is still connected!
Even weirder: when i turn the wifi off and on again, the phone reboots...
I have a Samsung galaxy gio, firmware version 2.3.4. Hopefully someone here has got a cure!
Greetings
Tychomen
Someone told on another thread that maybe you need to change regulating domain to another value on wifisettings -> advanced settings. Tell if it works, im also trying to fix my wifi problems with 802.1x networks!
At school e have the same wifi connecton mode, but I can connect without problems..
Sent from my GT-S5660 using xda premium
Out of the blue, my WiFi stopped working. I know occasionally this happens and is usually fixed by simply turning WiFi off then on again our by unplugging the router for about ten seconds, but neither of these methods is working this time. This is different, I'm stumped. (By the way I have the SM-P600)
So, the error message I'm getting is, "failed to obtain IP address", then if I click, "RETRY" I get an error message that says, "Network disabled because internet connection is too slow." Which doesn't make sense because all my other devices on my WiFi network have no problems connecting and have no speed issues.
Really, really frustrating. Any help would really be appreciated! Thanks!
The same problems occurs frequently with my tab P-601.
But I have to restart the tab and it works fine. I have to use mobile data for internet connection instead of wifi.
I appreciate any help.
Anybody else have this happen?
I haven't had this problem on my P600, but have had something like it happen on other devices. I think the issue is that Android will remember and avoid WiFi APs with a poor signal. When I am on the fringe of my home WiFi the signal is weak and my network gets blacklisted. To clear the blacklisting I have to force the device to forget the network, the connect again as a new network.
Couldn't detect WIFI
I updated the Android 4.4.2 and since then my tablet couldn't find my WIFI.
My phone and my computer found the network normally but my tablet just showed some of my neihbors' networks. I tried to restart the tablet and reset the router but didn't help.
Now I tried changing he router's settings through my computer and set the frequency to a higher value and now my tablet finds and connects to the WIFI normally!