Bluetooth Headset and Power Off - Looses Connection - MDA III, XDA III, PDA2k, 9090 General

Hi
I have set my phone to be power off on 2 minutes.
So when I use my BT headset and it power offs in 2 mts I loose the connection to the headset and it returns 30 sec into a call which I am taking by using the phone.
Is there a work aorund or is there something I am doing wrong.
Dhruv
IPAQ 6315 : Gives otions on what I want to keep activated when phone is in sleep mode.

You may want to repost this in the Blueangel upgrading section too. I will watch this as I have a similar prob. 8)
dhruvkataria said:
Hi
I have set my phone to be power off on 2 minutes.
So when I use my BT headset and it power offs in 2 mts I loose the connection to the headset and it returns 30 sec into a call which I am taking by using the phone.
Is there a work aorund or is there something I am doing wrong.
Dhruv
IPAQ 6315 : Gives otions on what I want to keep activated when phone is in sleep mode.
Click to expand...
Click to collapse

Bluetooth drains batteries like there is no tomorrow, keeping it on during standby is a judgment call. I think Bluetooth *should* shut-down; standby mode is standby: it's not off, but it isn't on either.
I'm running the 1.40 ROM with the latest Radio ROM, I forget the number, 1.13 isn't it? Bluetooth does not appear to turn off; my blue LED keeps flashing, and when I click the power button again the connection isn't even registered as lost or reconnected.
Stupid question: Are you sure it isn't your headset going into standby?
Chris

Related

Xda2 could not be turned on after turning off for sometime

I have activated the advanced power feature where my xda2 will turn it off automatically after it is not used for, say, 3 minutes.
Initially my xda2 will turn itself on by an incoming call. However, after some time, my xda2 will not be able to turn on when there is incoming call. Furthermore, I noted that whenever this happen, I am unable to swith it on, even by pressing the Power button. Each time I have to perform a hard reset and that erase all the data in my xda2.
Is there anything that I could do to prevent this from happening? Right now I could only choose to turn off the backlight whenever my xda2 is not in used.
I would appreciate if someone could advise me on how to go about addressing this problem. By the way, I have upgraded my ROM version to 2.06.00WWE.

Power Problem

My PDA2k seems to be turning itself off even when in use :?
I use TomTom3 in the car, and even when the power is plugged into the bottom it was turning off ever few minutes.
I just took a phone call and when I has finished talking I noticed the screen had gone blank and pressing the red handset didn't bring it back, the power button did. (I do have screen lock on).
Having said that, thinking about it, I was watching TV progs on WMP on the way home and it never shut itself off once :?:
Anyone have any idea what is going on? Is this normal?
I have an o2 XDA2 S running TomTom 3 with the TomTom cradle. I occassionally find that the pda just turns itself off.
It doesn't happen all the time.
I have also found that sometimes during a call the pda turns itself off and I cant get it back on by pressing the handset key, just the on off button.
Cheers
Fatzzz
click start>settings>system>backlight . . in here you can change the time it takes to turn off in not touched the device, 5 mins max.... also if you click button lock in system settings, you can set it so that when it happens, you can tap screen and it comes back on again.... tho i prefer to keep that off, otherwise it may ring people while it its protective case.. :lol:
and going by all the software that is out for these xda's, you can prob find a programe /or hack to change it even longer if you need that!!!
But when it is on external power (plugged into the car using TT3), it shouldn't shut down at all. Aside that, when in use (when receiving a call) I wouldn't think it should shut down should it?
I have a seperate scren lock installed too. I found the built in one not enough. When it is in my belt pouch and I get a text, or connect to my BT car kit or something, it wakes it up. All of a sudden all the keys are being pressed (by the squeeze of the case) and all kinds of applications are opening!

Power setting dosn't work

My XDAiiS screen goes blank and drops the bt conection, (not very useful if your using your handsfree or getting directions from the TomTom navigator.). I have gone into the power setting and unchecked turn off device if not used on external power.
No effect
Cheers
K
I assume it might be something with the registery, either try soft-resetting and see what happens, or just backup your needed things and do a hard one .

[Q] Wifi drops randomly...?

This is getting really frustrating. I can't use my phone for anything.
It started a couple of days ago.. My phone started losing wifi connection but then connecting again almost immediately. My data network isn't great at home and that means, when the wifi drops nothing works.. I've tried everything I can think of.
The wifi doesn't turn off, it's set to never sleep.. It just disconnects for about a second, even when I'm using it.
Any ideas?
Does it only happen to your phone?
SMNE said:
Does it only happen to your phone?
Click to expand...
Click to collapse
Yes, my transformer stays connected and so does my pc..
Edit: Actually I had a weird problem where my transformer pad couldn't connect a couple of days ago. Nothing seemed to work and I think that is around the time this started happening.
Edit2: It seems it happens only when bluetooth is on...
I had the same issue and fixed by typing at the dialing keypad *#197328640# then press the menu button and choose WIFI then disable WIFI Power Saving Mode , after every restart you need to do it again
tantan911 said:
I had the same issue and fixed by typing at the dialing keypad *#197328640# then press the menu button and choose WIFI then disable WIFI Power Saving Mode , after every restart you need to do it again
Click to expand...
Click to collapse
I read about that and it's not really a solution to me. What bothers me the most is that it only does this when bluetooth is on.

What turns on a head unit ?

I have a 1 yr old LM px5 with boot issues.
I used to have on auto sleep but the damn thing would never wake up. Even pressing the on off button.
Now I have it on sleep after 1/2 or so which was a little better, and reverse cam worked if I have to re-start.
Once on it works and runs fine and has never turned itself off, so I dont suspect any lose power wires.
However I have briefly had issues with my canbus due to a faulty alarm unit. Since repaired but ever since steering controls have sometimes been erratic . That I can live with but its the not turning on thats the problem.
To me it seems like its (sometimes) not getting the 'turn on' command.
Can anyone advise please, because this unit 'should' work without canbus - yes ? If so how can I turn on without canbus, when its getting power.
It always turns off fine when I press the button but will never turn on just by the button. Even if car is running.
Answer: Whisper sweet nothings
Really ? ... ?

Categories

Resources