Related
I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......
I have not tried it with BT GPS, but looking at what everyone else went through with their Headsets and bonding issues, I can defintiely attest to the fact that the new BT Stack on 1.72WWE works great! I have never had to re-pair my Jabra BT 250 since I paired it the first time two weeks ago. I have also been able to ActiveSync over BT without any problems.
Lucky u guys, when i did the update, i cant active sync through BT
first_major:
Try this attached document and see if it helps.
sheran_g,
Thaks alot, all i was missing was to do the active sync profile, your document helped me.
Thaks again
(some) GPS problems with 1.72 (and 1.66)
Victor said:
I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......
Click to expand...
Click to collapse
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Victor said:
..... I say yes .....
.... unless one tries "the old fashioned way" with BT GPS.
Click to expand...
Click to collapse
I can not remember that NO was an option. Do you mean this with the old fashion way???
Ronald
Hi guys
I'm guessing that the 1.7 upgrade is not avalable in Australia??? I cannot find it on the MyXDA website for download? is this update that you are talking about not for Australia/Asia?
Cheers...
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
You might need to download Adobe Acrobat Reader in order to view the file. You can find the Acrobat Reader here.
dont try dow view the file in IE
Download it first and THEN view it
This works for me
smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
With gozilla I can also not download the pdf, but with "save target as" it works.
@sheran_g
BTW Thanx for the post
Re: (some) GPS problems with 1.72 (and 1.66)
ronald2oo2 said:
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Click to expand...
Click to collapse
Are you sure this isn't TomTom's GPS Driver causing this? TT's GPS Drivers since v2.08 have locked the BT Com Port for exclusive access by TomTom and this prevents other apps from accessing a BT GPS. Solutions are either install v2.07 which was the last driver that did not do this or remove 'the Tomtom~GPS' entry which is the culprit, removing this removes the BT Com Port lock but does not affect the use of TomTom.
@ griffog
Actually I use TomTom ~GPS 3.03 which does not have this problem anymore! Anyhow I still (temporarely) remove the TomTom ~GPS driver and soft-reset when I test with Alturion.
But thanx for the tip.
BTW it does effect the use of TomTom for me! I guess you have a serial (non BT) GPS !?
Ronald
No I use BT GPS unit's exclusively. I'll have to investigate this as I have not heard that v3.03 no longer has this problem!
@griffog
I have this information from the Dutch PocketPC-club TT forum.
It is also consistent with what I see since the TT3.03 upgrade, even while my other GPS application (Alturion) is not working. If I run TT GPS and close it and then start Alturion the Blue LED of the GPS starts flashing fast (sadly I still get "no GPS found" however).
Ronald
:wink: remember you heard it first from me, the Premier GPS Resource :wink:
Excellent news! I've just loaded it up to test and you were right It's such good news that I've posted a front page news item, thanks
Indeed it was very good news.... but therefor also more disappointing for me that I don't get Alturion -my second GPS application- to work (on the eve of my holidays).
If you also use Alturion 5.3.1.4 (you seem in to GPS), can you share your configuration with me?
OS (1.66+?)?, BTHTools or WM serial BT profile? GPS? GPS config in Alturion? and anything else you might consider important.
I really need some new straws to grasp because I have no more ideas about what to try.
Ronald
Sadly Alturion hasn't made it across the channel. I'ce contacted them on numerous occasions for a review copy but never received a reply.
Another cool fix is the fact that you can now be connected through Activesinc using the cradle and at the same time now you can receive MMSs without a problem.
Before the 1.72 upgrade, you just couln't do that. :wink:
I installed TomTom 5 on my qtek 9090 and when I choose navigate to address there is no screen keyboard. I think it detected the external keyboard and therefore is not showing it.
Anyway to get the screen keyboard working ?? :?:
:idea: Try the following...
In register of PDA..
HKEY_CURRENT_USER\Software\Microsoft\Shell
Change..
HasKeyboard value from 1 to 0
To get to the register u can use the following app.
Registry Workshop from http://www.torchsoft.com
Install this on your PC and use file / Connect to register of mobile device
(Active sync must be connected to the device
Good Luck!
No luck
Didn't work
Changed > softreset >no keyboard
reinstalled >no keyboard
tt 4.4
I have the same prob with TomTom 4.4 and my Qtec 9090.
Hope someone comes up with a fix.
How is TT5, I was waiting to see if it was a lot better than 4.4 or much the same.
No I dont have the prob anymore. Changed to 0 rebooted and changed to smaller keybord in TT 4 and there it was.
Thanks DVB works fine and just in time for a 4 day weekend driving around up nth Holland. :lol: :roll: :wink:
How the HELL did you get TomTom Nav 5 so quickly?!?!?!
The upgrade was only released yesterday.
PLEASE EXPLAIN!!! :shock:
lydiachris
DVB4Free said:
:idea: Try the following...
In register of PDA..
HKEY_CURRENT_USER\Software\Microsoft\Shell
Change..
HasKeyboard value from 1 to 0
To get to the register u can use the following app.
Registry Workshop from http://www.torchsoft.com
Install this on your PC and use file / Connect to register of mobile device
(Active sync must be connected to the device
Good Luck!
Click to expand...
Click to collapse
This worked for 4.4, but not for the new 5 version.
I have made those changes and anything doesn't work....
has somebody been able to troubleshoot it??
greetings
Me too, Im gonna have a poke around and see if I can throw something into the mix.
:shock:
lydiachris said:
How the HELL did you get TomTom Nav 5 so quickly?!?!?!
The upgrade was only released yesterday.
PLEASE EXPLAIN!!! :shock:
lydiachris
Click to expand...
Click to collapse
Check the newsgroups :wink:
I have the same problem with TT5.
I have asked the fench support of Tomtom and they replied to me that there was no issues for this at that time.
It is due to the fact that tomtom developpers have made the choice to consider the QTEK 9090 or similars like a Keyboard PPC (like HP6500 or Treo 650) to limit the number of version... that's what they said ... :shock:
As the QTEK 9090 do show a virtual keyboard on Street Number search or on reg screens and not on Town or Street name sreens, i do think that there is actualy a bug on QTEK 9090. It is also disapointing to try to type a poste code search with the hardware keyboard as when i press the "Fn" key i got a nice "Ñ" or when i press the "Shift" i got a "Ò"...
I think we should send a lot of request to the Tomtom support to have a chance to see an update in a future relaese (It could be an option whithin the parameters for exemple...)
...
Hi,
It was even worse in my case (I upgraded my Rom 1.22.556 to 1.40.553 since release of new Dutch retail a few days ago):
- As already mentioned the Registry hack (see reply from DVB4Free) works only for 4.4 version and not 5.0. I am still looking for a work-around to get my on-screen keyboard back while I wanna type a location/street to navigate to.
- Despite the fact I am using TomTom bluetooth receiver, I can't get my Qtek9090 connected to TomTom as long as I select the TomTom BT icon in wizard interface. After a lot tries I figured out that it only works if I select the 3th Icon (general bluetooth receiver) and not the second icon (the small silver color TomTom BT receiver). Isn't this odd?
- My 'Navigate To' item in Contacts popup menu is gone for good. It was working on TomTom 3.07 (and even on 4.4 so far I can remember). But since upgrade to v 5.0 I can't navigate to someone's address from my Contact list.
regards,
- Avareh
on screen keyboard
DVB4Free, dude is there nothing you can do to fix this problem? I tried it on TomTom 4 and it worked fine, after altering the key from 1 to 0 it worked. I have an XDA 2s and now I've just installed TomTom 5 I can't navigate to anything!
Cheers!
Anyone had any luck with this yet?
Peter
Success!!!
pscomp said:
Anyone had any luck with this yet?
Peter
Click to expand...
Click to collapse
I have found that if you download the Great_Britain.postal file the Fn & Shift keys work ok so you can enter numbers
And also the added benefit of 7 digit postcodes, not sure about ppl who cant find a postal file for their own country though. But it worked for me so give it a try...
pscomp - I am new to all this :shock: , but just got tt5 and I also have a MDA III. Can you explain what you did to get the keys working.. Thanks in advance...not sure what you mean about the download etc...wherefrom and where too?
Hi,
I can't remember where I downloaded the file from. Ive tried to upload it but I think the ftp is down :? . But it looks like it may be here ftp://ftp.xda-developers.com/Blueangel/
All you do is create a folder called zip on your SD card and put the file in there. That is assuming you are using the Great Britain Map. I will keep trying to upload the file though.
Hope this helps you
Yay, got the file uploaded.
All you should need to do is download the file, unzip it and then stick it in the zip folder on your SD card.(That is assuming you are using the Great Britain Map)..
ftp://xda:[email protected]/Uploads/
The file is called GreatBritain.zip
ekapco said:
I installed TomTom 5 on my qtek 9090 and when I choose navigate to address there is no screen keyboard. I think it detected the external keyboard and therefore is not showing it.
Anyway to get the screen keyboard working ?? :?:
Click to expand...
Click to collapse
same happens to me when I install 1calc
I bought a new TT5 UK BT kit that arrived yesterday.
I (obviously) have the ZIP file on the SD card and I still don't have an onscreen keyboard. The odd thing is, I'm pretty sure I did have an onscreen keyboard during the installation, as I used it to enter my "home" location.
I've logged a bug report with TomTom, if they come back with anything useful I'll let you know.
Q.
The GPS API gateway in I-Mate latest ROM (1.13.53 WWE) seems be missing.
If you search in JasJars help under the term GPS, you will be directed to [settings/system/GPS/etc.) but the latest JJ ROM does not seem to have it there, unless I'm missing something.
As result, I can pair a BT GPS, outbound it to P4, inbound to P8, but these ports can not be detectable by a GPS software who does not recognize these virtual ports.
Any advice ?
============
Saar
Registry Editor
In HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
The add a DWORD called "Group" and give it the value of "2" (dec)
Soft reset
You will find the GPS icon in Settings/Connections
GPS Applet back from the dark
Thank you tekflow.
Works, now I'll see if Destinator works as well...
=====
Saar
Something looks wrong with the BT GPS connection on the IMate JJ, latest ROM.
- After revealed the hidden GPS applet, thx. to Tekflow !! (why hide it, maybe cause it doesn't work ?)
- Paired 2 different BT GPS devices (RT RBT1000/GS BT-338) to JJ
- Chosen as Outbound Port - Com 4/Inbound Port Com 8 (not that otherwise possible)
- On GPS Applet set common virtual GPS port to Com 9
- Nav S/W (tried 2 different) actually DOES NOT recognize either BT GPS
On the IPaq 27xx, with a Beta WM5 and Widcom excellent and user friendly BT stack, all works like a charm..
Or maybe I am doing something wrong.
Pls help..
Thx.,
Saar
Hi Saar,
I read about this quite a lot looking to find a solution for the problem. It looks like the Destinator cannot see the required COM port in the list. Even when activating the GPS API with the registry it doesn't help.
For destinator there is a solution, for NavNGo I couldn't find one so if you know something I'll be happy to hear.
What you need to do is to open the file destinator.ini with HEX editor and manually change the COM port to the one you need (same one you created when you paired the device I guess it is 8)
and then it will work.
You can find further info here:
http://www.mtekk.com.au/forums/viewtopic.php?t=7600&postdays=0&postorder=asc&start=10
Is DestinatorPN looking fine on your device ? When I tried the menu was all messed up, maybe because of the VGA ?
I could only work with ver 3.0.75
by the way, I wonder why you don't post a question in pocketpcfreak you prefer writing in english more than your own language?
Sagi
Just been playing with this myself, connected my BT receiver to COM:8 and share this using COM:0, TomTom V5 sees both ports but only manages to talk to the GPS receiver on the physical port ie COM:8 not the virtual port COM:0.
Also can anyone explain why most of the COM port are unavailable when pairing BT devices.
And whats QCT Data Interface & RIL Port ? ?
Thanks
Destnator PN and WM5
Hi Sagi,
Thx. a bunch. Tried it to the letter with DPN..had a moment of hope, but it was a short one. Unfortunately.
I'm hanging out here, as I doubt if anybody could answer it on the local forums...you see... I'm usually the Q/A master..so if I don't know...well, you see my point...
Anyway, the problem with the "spread" menus has been fixed.. Destinator PN "X" menus look smooth on the JJ (it's a beta of the next version to come soon). I have inside sources..
However I've used a large part of my box of tricks to make DPN work on WM5, with MS GPS API, and BT Stack, but nada...:-(
Of course we could dig deeper into this, but I assumed somebody may already'd have a clue. That's why we're here for, no ?
Again, thank you,
===========
Saar
No problems.
In the mean time you can use 3.0.75 it works fine with the tricks mentioned above.
When you have a perfect solution I'll be the first to try it. I like "Nehama" much better than TT5.
If you need another beta tester for the new ver on the JJ just let me know
Sagi
Thx. again.
In fact hex editing the ini fili causes the software to behave just as in your mail..... less actually connecting the GPS. I guess it's a starting point, I'll pass the info to our RD.
Regds.,
=========
Saar
im having the same problem
Hi Saar!
im having the same problem with Jasjar + navNgo using BT-338
for some reason the program cannot find the gps .
i tried contacting the guys at GPS&more to get support but still no luck.
Maybe you got more luck than me and can help me?
I've just tested with PocketStreets 2005 and that works allright with Jasjar and Globalsat BT-338 after unhiding the GPS in the controlpanel. I set the com port to 8.
Hoooowever... I have serious problems with getting the correct coordinates when using the wm5 gpsapi.dll (gpssample in wm5 sdk). The same sample works 100% with a wm5 qtek 2020 and wm5 qtek 9090.
Anyone noticed anything similar? Or know of a gps app that uses wm5 gpsapi?
/Cheers
JasJar GPS API
David K:
No solution yet, tried also with RBT1000 BT GPS. Outbound Port: Com4, GPS Program Port: Com 9. Same behaviour.
To further focus on the problem, we've uninstalled Destinator and installed a straightforward GPS monitoring App. (Vito Navigator 2). Auto scanning detects Port 9, but does not detect a GPS signal on this port, either from GS-BT338 or RT RBT1000. This excludes the possibility of a problem with D or NG apps.
This also seems to be a hint for a ROM/Hardware problem. I hope it ain't. We're also investigating with HW manufacturer. I'll update if resolved.
===============
Saar
This is very similar to TomTom, it can see the GPS COM port, but no data is received....
Maybe this is the eason why its been disabled ?
What I don't understand. seems as some JasJars do GPS OK while some other don't..
============
Saar
TOMTOM
Actually I use TOMTOM now (5.1)
The software can see all COM ports and it works great with my BT GPS set to COM8 (it does not need the GPS API at all and I can disable it)
Version 5 had same problems as D or NNG and couldn't see the port. the new BT GPS cab file that came with new version solved this problem.
I still believe that it is a D and NNG software issue that can be fixed
I'll be happy to hear any updated from the HW manufacturer when you have them.
SaarAvigour;
Do you have access to an EMTAC BTGPS? I have this working.
You'll need to know the paring key to get this working for the Bluetooth GPS.
I believe you'll only need to setup an Outgoing COM port, I used 8
Microsoft Pocket Streets can be set to COM 8 and it should work.
Only after the GPS has a fix will the second port work, I set this up to COM 6 Pocket Streets can work with either COM 8 or COM 6.
Note that I had to delete the Incoming port I setup to get this to work.
Hope this helps some.
1) Start (menu) | Settings | System (tab) | Bluetooth (icon) |
2) Check Turn on Bluetooth | on Mode Tab
3 Tap Devices (tab)
4 Tap New Partnership...
5 Tap name of found Bluetooth GPS device to select, then next
6 Enter 0000 as the passkey (four zeros) for the Belkin F8T051, 0183 for the EMTAC | tap next
7 You can rename the device on this screen only | Check Serial port | Tap Finish
8 Tap COM Ports
9 Tap New Outgoing Port
10 Select Bluetooth GPS from List of Devices | Tap Next
11 Select COM Port, try 0, 5, 6, or 8 | Tap Finish
Thx. Dah54,
Been abroad, seen your posting only now. I have a GlobalSat BT 308, but the principle is simillar. I got it all working with Destinator.
thx.,
=====
Saar
Destinator on JASJAR
Hi Saar,
Since lots of people are trying to get it work, and tried to help you, it will be nice of you tel explain how you got it work for all other users who are still struggling ??
gps
By all means, thought I did...sorry
Pair your GPS
Start/Settings/Connections/BT
Set GPS Serial Outbound Port to Com 8 (Com 4 possible, but was not detected by some specifically tested SatNav apps.)
Unhide your GPS Control Panel (still a mistery why some OEMs decided to hide it, and others not to)
Use a Registry Editor
Go to HKEY_LOCAL_MACHINE/ControlPanel/GPS Settings
Unhide the GPS Control Panel by modifying from (1) to (0)
Confirm by exiting and saving (OK button)
Your GPS Control panel will feature now, in its all grace, in Settings/System
There's another modification suggested,that will put the pannel under Settings/connections, but why change the original setup
Set your GPS Virtual Port
Start/Settings/System/GPS
Leave Hardware as ("None")
Set Programs to Com 8
Save and Exit (OK)
Soft Reset
Probably a reason to lots of failures. Suspectedly, the GPS control panel makes changes to registry. No SR, and changes are non active.
Works for me with various SatNav apps. Here, case closed....
Saar
Hi All,
I have a i-Mate PDA2K-EVDO with the following specs:
ROM:2.03.00 WWE
Radio: HA01_140
Ex ROM: 2.03.11 WWE
Currently with eXpansys FSE9 Car Kit (Includes integrated GPS reciever) URL"http://www.expansys.com.au/product.asp?code=124312", with ALK (Travroute) CoPilot Live 5 for PPC.
The issue that I am having is that when the phone is docked in the car-kit all call functions work fine (except for volume being a little low, but that may be spk position), however I cannot get the GPS software to communicate with the reciever. I am not sure whether the com-port that is used to communicate with the reciever is only being half-opened (or not remaining open).
I have tried modifying the selected COM settings and am currently using (COM 1, 4800) which appears to have some communication with the device. When the unit first is powered-up the GPS recieving light is on (steady) and when GPS location is established the light starts flashing. I have installed GPSInfo (for WM5) and am able to scan ports to establish COM1, 4800 as the connected port. When I then press the "Cold Start" button the GPS reciever resets, and then goes through the re-establishment phase, but no GPS data is being parsed.
To top things off, I did manage to get the CoPilot software to work for all about 5 mins. So I am thinking that this may be a port issue (or something with the reciever).
Can anyone provide some help with the following:
1 - A utility that can check com port activity, and see what is happening at this level.
2 - Some insight as to what other programs may use the same ports as COM1 - As I believe that it is serially emulated as a COM.
3 - Any other insight would be greatly appreciated.
Thanks in advance.
pro-integrator said:
Hi All,
I have a i-Mate PDA2K-EVDO with the following specs:
ROM:2.03.00 WWE
Radio: HA01_140
Ex ROM: 2.03.11 WWE
Currently with eXpansys FSE9 Car Kit (Includes integrated GPS reciever) URL"http://www.expansys.com.au/product.asp?code=124312", with ALK (Travroute) CoPilot Live 5 for PPC.
The issue that I am having is that when the phone is docked in the car-kit all call functions work fine (except for volume being a little low, but that may be spk position), however I cannot get the GPS software to communicate with the reciever. I am not sure whether the com-port that is used to communicate with the reciever is only being half-opened (or not remaining open).
I have tried modifying the selected COM settings and am currently using (COM 1, 4800) which appears to have some communication with the device. When the unit first is powered-up the GPS recieving light is on (steady) and when GPS location is established the light starts flashing. I have installed GPSInfo (for WM5) and am able to scan ports to establish COM1, 4800 as the connected port. When I then press the "Cold Start" button the GPS reciever resets, and then goes through the re-establishment phase, but no GPS data is being parsed.
To top things off, I did manage to get the CoPilot software to work for all about 5 mins. So I am thinking that this may be a port issue (or something with the reciever).
Can anyone provide some help with the following:
1 - A utility that can check com port activity, and see what is happening at this level.
2 - Some insight as to what other programs may use the same ports as COM1 - As I believe that it is serially emulated as a COM.
3 - Any other insight would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there,
Not too sure if this'll help but with TomTom 5, you need to disable incoming beams on the Start\Settings\Connections\Beam to enable the Hard-Wired GPS to be read..
Try it and let us know the outcome..
Cheers!
Still No Good
Hey Mr Philly,
No luck with the Beam Settings. I even went as fas as Hard Resetting the device :x as Active Sync to Exchange stopped working this morning....
Any other ideas?
Thanks again for your response.
Paul.[/quote]
Paul, you mentioned specificaly that you loaded GPS Info (for WM5) is this the OS you have on the device? if so the GPS applet in the control panel / connections tab might need playing with - BTW I should have mentioned as its a wired GPS unit leave the Receive all beams OFF on this device - Mike
Interesting Point
Hi Mike,
Thanks for joining in on this thread.
I have disabled beams on the device.
THe GPSInfo app loaded was WM5 although I only have WM2003 SE. I have searched through multiple ng's to find a 2K3SE version, but all seem to point to the new version.
This was also the file provided my the distributor of the car-kit & cradle. The GPS unit is integrated into the Car Kit, so that is what i refer to as hard-wired (opposed to GPS).
As for the applet, I do not have a GPS applet in the connections section :?:
Can you provide any more informationon this point.
Thanks again,
Paul.
Disregard it then, I thought you might have loaded up a 2005 OS by chance , this has no bearing on the problem on your device - more thinking time required - Mike
Re: Still No Good
pro-integrator said:
Hey Mr Philly,
No luck with the Beam Settings. I even went as fas as Hard Resetting the device :x as Active Sync to Exchange stopped working this morning....
Any other ideas?
Thanks again for your response.
Paul.
Click to expand...
Click to collapse
Hi Paul..
Apologies.. I also need more thinking time.. :lol:
If I think of anything else, I'll get back to you..
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
-TXTman can't capture sms
-AE Button Plus broke "end call" key when i remapped it to end programs
-Replacing IE_Short.lnk with task manager command causes internet explorer to open simultaneously with task manager
yeah no threaded sms programs will catch the messages. that's my only gripe right now.
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
aauspitz said:
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
Click to expand...
Click to collapse
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
countfloyd said:
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
Click to expand...
Click to collapse
I've run an Application Unlock on my S620 and I've managed to install Blackberry Connect but, like you, not getting any mail.
I've given up and gone back to the German WM5 rom. After a couple restarts of the device, the blackberry connet top banner doesn't even show up on homescreen anymore!
I'll wait till rim gets their act together on WM6.
J
Hmm...I am going to give this another try.
I realized that I couldn't get emails on my device, even after putting the WM5 rom back on, because I hadn't sent a "service book" from rim's blackberry site. That did the trick. Gonna, reload WM6 and give it a shot!
J
Bah, no luck getting this thing to connect or run reliably let alone get emails...
how do i go back to my original .. windows mobile 5...
if anyone is using WM6 on the Dash...
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
and if it does change it to "headset" automatically could you please tell me if you are able to change your profile to "normal" while the bluetooth headset is still connected
Thanks in advance
streetx613 said:
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
Click to expand...
Click to collapse
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
McHale said:
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
Click to expand...
Click to collapse
well yeah it would seem that way but when i have my bluetooth headset connected... sometimes i want my phone on silent/vibrate and other times i want it to play sounds, and i hate having to go and edit the headset profile manually to do this, just changing the profile would be a lot more convenient.
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
McHale said:
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
Click to expand...
Click to collapse
no for bluetooth, you can't change your profile unless you disconnect the headset
I noticed that none of the MSN pre-installed software that was part of WM5(MSN IM, Hotmail access, etc) is on this version. When I attempt to set up my messaging to receive hotmail, I get an error stating: "could not find pmsnlauncher". I've looked around and found a download of the pocketMSN software, but it must be 'activated' for ~$20. It does mention (msn website), however, that if the software is 'pre-installed' no activation is necessary. This leads me to believe that the MSN software is simply not part of the BETA rom.
Anyone else notice this? Any thoughts?
msn is now windows live.
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
uhhh... tpc works just fine for me... i'm using 2.0 beta 4 of tpc, but other versions should probably work as well. make sure your phone is completely app unlocked, or you will have problems. that includes the 0000101b policy entry in the registry.
i'm the creator of tpc, so if you have questions about it feel free to message me.
does "right menu" work on WM6?
Sling player works with WM6 beta
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
I found this over at the sling community forum. I can confirm that it Sling player mobile is now working with the install of the DLL only cab auto install.
Use the link below and go to the March 10, 2007 post by wpbear.
http://www.slingcommunity.com/forum/thread/18903/Windows-Mobile-6.0-incompatible/