OK here's a strange one. Orange SPV M2000 with Navman Smart ST V3 amd a Holux GPS cradle (which uses the com port on bottom of the phone so its hard wired).
Since installing I have been through a process of elimination to find out why the software reports NO GPS DATA occasionally, especially when it had to do anything that involves loading something, i.e. a speedcam warning or voice command approaching a roundabout. Tried the lot. Disabling ports/activesync etc.
Then one day it dawned on me that it wasn't happening on a long drive North from London. The only thing that was different was I didn't have the headset plugged in!
I've tested this over the last few weeks or so, and yes, headset plugged in means loss of data from the GPS intermittently.
I installed TOM TOM 5 from a friend and low and behold it seems to be doing the same. In TOM TOM you get the signal bars at the right and they go to zero every couple of minutes then spring back up. So its not software specific.
I would have thought the supplied headset was just a good old-fashioned 'feed to the speaker or feed to the earpiece' hard connection but it would appear not to be so.
So the question is, what is the Blue Angel doing when the headset is plugged in that it isn't doing when its not?!!!
....... tumbleweed rolls by........ signs creak...... saloon doors swing......
OK, ....I know, ...I know, ....if no one has posted it probably means no one knows the answer So I'll ask, does anyone use their Blue Angel with Navman SmartST V3 who could try this with the headphones to see if its a one off or a real issue?
As a test I installed TomTom Navigator and it does the same thing.
Any thoughts appreciated.
OK guys. I know I can't force a response so I'll post findings to date. For one reason or another, I have used Navman Smart ST V3 (now returned) a 'borrowed' version of Tom Tom navigator 5 and, in an effort to remain 'legit' a version of Destinator PN. All these exhibit the same problem so I can only presume that there is a hardware issue with the Blue Angel and my GPS port (port 1). Does anyone have a clue what the BA does when you plug in the headset that could cause such a problem or pehaps even a fix?
I have an XDA IIs with TomTom 5 and a wired GPS unit.
It doesn't exhibit this fault.
The headset (wired) works just fine. I have disabled BlueTooth to get reliable telephone performance, so I can't tell what that would work like.
HTH
Steve
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
There might be a connection here (no pun intended). For quite sometime, I was using an old SE637 phone and had it working flawlessly with my Garmin c550 GPS.
During an hour and a half trip yesterday, the Garmin notified me 3 times that the bluetooth connection with the Tilt was lost (the SE profile had already been removed from the Garmin). I never saw this message before with the SE. FWIW, the 2 devices are no more than 2 or 3 feet apart at all times, and neither of them are physically touched during the trip. I'm concerned that this might be an HTC problem. Any thoughts?
smonte said:
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
Click to expand...
Click to collapse
No one with an possible solution, or at least with the same problem??
Same problem here
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Fixed itself...
This seems now to have fixed itself - I had to enter the password twice in a row for some reason and then it worked properly. So now all happy...
Windows Mobile 6.1 rocks...
I have problems with my Bluetooth and the paired device in the car with almost every recent ROM.
After about 10 minutes driving with a connected phone, the Bluetooth shuts down on my Diamond. When I go to Settings -> ... > Bluetooth -> Mode -> Turn on Bluetooth is unchecked. If I check it again it connects again with the phone and about 10 minutes later it's off again.
I went back to the RUU_Diamond_HTC_WWE_EastEurope_1.93.479.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe. It's against my feelings, believe, etc. but I want to solve it .....
I installed Advanced Configuration Tool (3.0), went to Bluetooth -> Audio gateway power save and Disabled it. I did it because I was reading about suspended devices and power save features. I thought that the loss of Bluetooth is been caused by a saving power feature.
After a soft reset, the Bluetooth stays connected.
It's a start, but I'm not happy with it ... I would like to use cooked ROM's and optimal settings in the ROM.
There are other tweaks too in Bluetooth, for example the supported bitpool, etc. Perhaps those settings cause the shutdown of a connected Bluetooth device instaed of the power save feature.
Has anyone this kind of problems too with paired Bluetooth devices?
If so, would you like to help me to find the cause?
If not, can you describe what device you use (Jabra, TomTom, car radio, etc.), which ROM, which radio and extra tweaks?
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
olliver said:
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
Click to expand...
Click to collapse
I have a CD70 too in a Opel Zafira.
This "comm manager" thing is interesting, but it looks to me like an Opel issue.
Can't you flash firmwares by opel?
Riel said:
Can't you flash firmwares by opel?
Click to expand...
Click to collapse
That's an option, but my Trinity (P3600) performed great with the same car. Will an upgrade solve my problems? I know one thing, it's not cheap either.
I tried it with different ROM's, but it still happens.
I tried it with different radio's, nothing changed.
Till today, I've got now the new radio (v1.05.25.BS14).
http://forum.xda-developers.com/showthread.php?t=432770
It has fixed the delays in GPS + faster GPS fix and more important fo me Bluetooth didn't stop today.
I'm sure 100% sure yet, but seems to be better.
I got something to complain too about the new radio. The radio signal is less strong than the .05 radio.
Same problem here
My Vectra is equipped with CD70.
Previously I've owned a Kaiser and the problem was solved by one of the 6.1 radios, bluetooth connection was rock solid.
Right now I have the same problem with Diamond - after every single phone connection, when I'll hangup, the phone disconnects CD70. When I'll try to reconnect manually using CD70 everything is fine.
I've noticed that the same problem exists when I'm using Nokia bluetooth headset - one call, bluetooth connection dropped...
I've tried following Diamond radios:
.05
.07
.08
.BS14
and two Raphael radios by Bepe:
1.03.25.18
1.02.25.11
Each Diamond radio behaves the same way. Each Raphael radio adds a bonus - random bluetooth connection problems.
Right now I'm back with .05, I think I'll look for the software I've seen once (can't recall the name) - it's a PDA application designed for connecting to the car bluetooth systems and it has been cerftified to work fine with CD70.
Use Jetware Mobile for htc-diamond.
jetware
That's the software I couldn't remember the name.
Anyway I gave it a shot and it gets even worse, I couldnt get the connection lasting longer then 2-3 minutes, totally unstable
Right now I got back to radio .08 - the bluetooth link is rock solid, I guess I'll just need to get used to reconnecting after each phone call
Same bluetooth system in my car, same problems as you guys.
To avoid the disconnections after calls you need to go, with 'Advanced Config' to bluetooth->Audio gateway power save, and switch it to disabled.
For me this little change solve the 'first' problem, but I have another one that I don't know how to solve: the aparently random bluetooth disconections. Sometimes BT is not disconnected in hours, sometimes in days.
I am also using Jetware Mobile, but i didn't feel any improve...
The random ones depend on the radio rom version - I was using .05 and it was rock solid.
I will try .16 with audio gateway started and with power save disabled as you advised - I thought about it earler but previously I tried to disable the power save without enabling audiogateway service
Well, we will see if it works or not.
Hi,
I also have a Vectra CD/70 combination, for 2 yrs now.
I had a HTC3300 and 2years i had not a single problem with Bluetooth connection.
Now i have a HTC Diamond Touch Pro and have the same problems you guys have.
I tried all your suggestions, radio's and so on with no good result.
The good news is .. its an Opel problem and it seems to be that a Bluetooth Firmware Upgrade is available from Opel Germany. I just contacted my dealer and next week he will Upgrade my bluetooth firmware.
I will keep you guys informed.
Hello,
had the same problem with my Opel CD70.
Using Jetware Mobile and limited the entrys who copied to the car to a max. of 5. Also disable the call lists. Now it works.
I think the Opel/Vauxhall Bluetooth Connection disabels if to many entries are copied to the car.
Hello,
any News about our Bluetooth Problem ???
I also have a CD70 from Opel and I cannot understand why my Diamond swich of Bluetooth after a while ?
Is it an Opel-Problem or does anybody now an Application which helps ?
Thanks a lot for Your help,
Stepos
Hi,
I am currently using BTrestore (http://home.casema.nl/rgschmidt/WM/Downloads/BTRestore_V_1_0_0_PPC.ARMV4.CAB). This utility checks the status of the bluetooth stack every 5 secs and (re)enables it everytime it's down. It seems that the 5 secs are short enough to keep the phone connected. It's not a real solution and unfortunately this tool is sometimes instable too, but it absolutely extends the connection time with the UHP.
Maybe bullock can tell us if the carkit upgrade solves anything...??
I also created a ticket at HTC, but they refuse to troubleshoot user specific issues. They told me they only look into issues if they get enough calls from different users and to keep an eye on the update site (they seem to be able to solve issues without knowing what the actual issue is...). So I would encourage everyone here to create a HTC ticket for this issue. I still think it is an HTC issue: a bluetooth stack should never go down without any user intervention.
Good luck!
BTrestart and Jetware Mobile doesn`t help, my Touch diamond disconnect again from Opel CD70 and swiched off Bluetooth !
Can anybody help ?
Sorry guys, the OpelDealer is still "searching" for the Bluetooth upgrade.
After several phonecalls maybe next week (1st week of Febr) it will be made available to the dealer.
Like i said ... i willl keep you informed ... still have this lousy problem !!
..does anybody use the new Rom 2.03 ? Any difference ?
I also asked my Opel-Dealer for an Update of UHP, next week I 'll get new Information....
... well guys I had my CD70 updated !! I am/was very sceptical because the only thing they did was a re-install of the Language of the Navi System with a version 2005 CD. I asked if that was all to correct my Bluetooth problem .... the (smiling) answer was YES.
I have it now for 24hrs ...... and Bluetooth is still on )
I will let you know the result after a week !!
..i can't beleave it works with a 2005-update ! Great !
My Opel-Dealer is still busy in selling 10 Opel Corsa every day (..the magic word is "Abwrackprämie") , so I'll have a date there next week...
When I bought my Vectra the dealer had also to reinstall the Language-CD, maybey it was the wrong version....
...... Sorry guys ......
This update DOES not do the magic trick !! So we have to find another solution
who has the right idea ??
Hello Everyone,
I have a Note 3 Neo 7500Q ( Turkey Version). I am overall satisfied with the phone, but when I try to connect to my multimedia car kit via bluetooth, I have problems. It pairs up with the kit, but neither my nor the other parts voice is transmitted. I tried to every way without luck. Does anyon else has or had the same problem? Is there a way to overcome this issue? All kinds of help is appriciated.
I use the BT car kit all the time, with no issues whatsoever. My unit is a Parrot MK9200 or something. It is 4 years old, can't remember the exact model number. Phone calls, music streaming etc. works fine.
Here are a few suggestions you might try:
1) When I had the Parrot initially, 4/10 the phone was failing to connect over the Bluetooth. I upgraded the Firmware of the Parrot. Ever since, no connection issues. Check whether your Bluetooth unit has a FW update!
2) When the phone pairs with the car the first time, it asks for permisson to access the Phone book, logs etc. Mark "Always yes". That might be your problem.
Hello
I'm facing the problem that the bluetooth connection to my cars multimedia unit is a big mess since 2020.
But not only when connecting to the cars BT. Every BT connection will randomly asks for permission to the contacts or messages...
The phone will not store this information correctly anymore. My car is an 2020 Opel and sometimes it says that the bt connection can't be established, but it actually plays music over this connection and phonebook is also transfered.
I have the pixel 3XL since it came out and it is completely stock non rooted or something like that (I'm to old for this stuff as a daily driver )
So, did google mess the driver up that it will not work correctly anymore? Or does someone know what's going on in the device?
Daimonion1980 said:
Hello
I'm facing the problem that the bluetooth connection to my cars multimedia unit is a big mess since 2020.
But not only when connecting to the cars BT. Every BT connection will randomly asks for permission to the contacts or messages...
The phone will not store this information correctly anymore. My car is an 2020 Opel and sometimes it says that the bt connection can't be established, but it actually plays music over this connection and phonebook is also transfered.
I have the pixel 3XL since it came out and it is completely stock non rooted or something like that (I'm to old for this stuff as a daily driver )
So, did google mess the driver up that it will not work correctly anymore? Or does someone know what's going on in the device?
Click to expand...
Click to collapse
Have tried different ROM's on this Pixel 3 XL so I completely understand the Bluetooth issue. Have grown to rely on turning off Bluetooth before using the passcode; kind of helps with the new ViPER4Android FX,
Since using ScorpionROM, haven't had any Bluetooth issues. Maybe give it a shot and see if it helps