Related
I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements
...Ok, I have been on this for about 4 hours now and I am starting to get a bit annoyed.
I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think I should also have ‘Set as Wireless Stereo’ or something, but I don’t.
Please, has anyone any ideas?
Thanks, Harold Clements
Wirless Audio Hacks
I really could do with someone’s help!
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am unsure:
a) if this is a solution to for problem / PDA.
b) what a hack is and why is it needed?
Please can someone help!
I don't know wich kind of PDA you have, as you can see everyone here calls their PDAs by their HTC's code name (mine is a universal), go to look the pictures of all the PDAs, find yours and search directly inside there, it will be much easier for you to find an answer.
One simple comment, your PDA has to have the Bluetooth high quality audio (is called be some PDAs in this way), see if your PDA does contain such feature, you have to activate it if you want to hear stereo audio, generally when you pair your phones for the first time, your PDA will show you the option already ticked, if you haven't see it, chances are that something is missing in your bluetooth profiles, go to your PDA's specific part of this forum and read, with patience and some luck, I'm sure you'll find whatever you need to get your PDA's stereo audio to work.
Most of the cases, are just the lack of the profiles or even installing another BT stack.
good luck
Thanks...
Thank you very much for your advice / reply, it was very much appreciated. It seems that my PDA is a Wizard. I will indeed search that part of this forum.
Thanks again,
Harold Clements
I don't think your phone supports A2DP profile. Correct me if I'm wrong.
Neither do i know if his phone supports it, I use to have an Ipaq 6340, it suppose that it didn't supported A2DP but with an BT stack extracted from another PDA (don't remember wich one) it worked, it didn't worked very well, it dropped audio more or less each 30 seconds for 2 seconds, someone said at that time that was processor lack of power -I didn't agree with this-, but I did no further investigation.
As far as I've understood, the main bottleneck for stereo profiles (or any deamanding profile in BT) is the radio, of course, if We don't have access to the manufacturers good information, good tools, much time and even more will is very hard to find a solution to anything, most of us do not spend lots of time with this things -it's not easy for anyone with a "normal" life-, and I'm not complaining!
It's just fine for me, the whole thing it's quite enjoyable like this, some more time spent in this way and it would become a second work.
So, may us have fun and keep an excellent forum up.
haroldjclements said:
I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements
Click to expand...
Click to collapse
on the front page not 2 rows (at the moment) below this thread in really big bold letters
MOTO HT820 SKIPPING SOLVED! NEW FIRMWARE INSIDE!
which covers the issues and varioius fixes (if any) for most phones.
To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements
a hack is getting a device which dont support a feature to do it anyway
if htc dident make your device to support a2dp == bluetooth stereo
you maybe be able to get it to do it anyway using a hack
if any hacks works for your device
as it differs
bluetooth support is never support for all profiles bluetooth have
plus there are bluetooth version 1 - 1.1 - 1.2 and 2.0
haroldjclements said:
To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements
Click to expand...
Click to collapse
The zoia a2dp hack (zoa2dp.cap) is what you need, it will give you "Set as wireless stereo" but be prepared for pretty bad skipping, that has not yet been solved for all of wizards.
Also if you flash to a custom rom (Like Molski's 2.26 it'll have the patch automatically.)
I have read every post about MS bluetooth stack vs widcomm etc....
I know someone can build a cab file that will uninstall the MS one and replace with the newest widcomm stack.
I LOVE my universal but I carry TWO phones with me because the universal's connection via bluetooth is not PERFECT for phone calls like the blackberry (oh i fking hate the blackberry for everything else).
I REALLY REALLY REALLY want to use only my Universal but the static on bluetooth KILLS me because I am on the phone 10 hours a day.
PLEASE please help me. Fish
This file fix Blue Tooth
Bluetooth stack
I would second Fish's comments about the Univerasl and the Bluetooth stack. I have bluetooth in my car and it is great WHEN it works. When it doesn't work it takes a lot of tinkering to get the car to recognize the phone again. I'm of course not sure if the issue is on the Universal side, but Bluetooth turns it self off, so there is some kind of problem. I have tried different radios, currently 1.13 (tried 1.14 as well, but went back). I'm very interested in finding a solution (not using two phones), can you please provide some detail on what the CAB file does to Bluetooth?
Thanks,
Sven
Logout. said:
This file fix Blue Tooth
Click to expand...
Click to collapse
What exactly does this file fix/change ?
I've just installed the WM6 crossbow helmi_c version
do I still need this file ?
This is a Stack changer to change from MS BT stack to Cambridge Silicon Radio BT stack. Originally developed for Dell AXIM (about what I've found). Seems to work fine there, but need to uninstall/reinstall after every soft-reset because of a volume lock bug.
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=392&more=1
http://www.aximsite.com/boards/showthread.php?t=108767&page=1
UPDATE
Do not install this patch yet. It is over a year old.
Follow the development/information on Widcomm BT Stack instead. Following links
http://forum.xda-developers.com/showthread.php?t=279236
http://forum.xda-developers.com/showthread.php?t=285419
http://forum.xda-developers.com/showthread.php?t=285696
http://forum.xda-developers.com/showthread.php?p=1073003
SO this is a different BT stack then the original MS and the widecomm ?
Daelyn said:
UPDATE
Do not install this patch yet. It is over a year old.
Follow the development/information on Widcomm BT Stack instead. Following links
http://forum.xda-developers.com/showthread.php?t=279236
http://forum.xda-developers.com/showthread.php?t=285419
http://forum.xda-developers.com/showthread.php?t=285696
http://forum.xda-developers.com/showthread.php?p=1073003
Click to expand...
Click to collapse
True
reading the posts in the forum he linked:
12-12-05, 09:57 PM
I'd rather go with the widecomm BT
I installed the Hermes Widcomm BT stack on my Universal. Sound is great, but the rest is troublesome. We need a developer to fix the code for us so it works on the UNiversal .
Check my thread in UNiversal/accessories. Or move that thread over here please!
Daelyn said:
http://forum.xda-developers.com/showthread.php?t=285419&page=20
Tried out BT Stack change for Hermes patch/program.
TEST RESULTS ON UNIVERSAL WITH WM6 (Midget aka Helmi unreleased)
Sound IS great. But other than that, this program does not work very well on my device. Of course this is designed for Hermes but I gave it a shot.
Issues:
1:
Screen flickers (only when this BT is turned on).
Flickers really bad and unable to use device.
Fix: set the device to standby (power button) and wake it up again. Flickering gone
2:
Once BT is deactivated for a few minutes I can't start it again.
Fix: No fix found yet. Only a Soft-reset and directly activate BT works.
3:
I can't use my GSM/UMTS connection anymore. Trying endlessly. Even after soft-reset's I can't connect. WiFi works fine though.
Fix: No fix found yet.
4:
Unable to uninstall this program. Tried several times. I get to the "Soft Reset Device Yes/Cancel". I soft reset, program still there and working.
5:
Hard-Reset, complete setup with WAP, MMS, MAIL etc.
Installed Widcomm BT Stack again.
Soft-reset:
Screen flickering (fix)
No 3G/UMTS connection avalible anymore. Even when BT stack is completly shut down.
We need a specific one for our Universal. Who's up to fixing this for us?
KEEPING this post updated.
EDIT 06: 18:40 @ 21/01/07
Click to expand...
Click to collapse
Quoted from my A2DP/AVRCP thread in accessories.
Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.
xixfishxix said:
Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.
Click to expand...
Click to collapse
try this link
it may help
http://www.pocketpctweaks.com/pocketpc_tweaks/increase_bluetooth_volume
frz
Thanks for the info
I changed the channel in the registry of the device to channel 5 as suggested on that webpage. It was the same quality. I then tried a few other channels and the same results - connection quality still staticy.
Thank you very much for trying to help me though. Fish
xixfishxix said:
Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.
Click to expand...
Click to collapse
I'm also worried with the same issue, because I've exactly the same problem. But I don't think only altering of BT stack should fix the problem. My understanding is, something is also to be done in radio (rom) side itself. Because I was using a different radio rom last year at about May or June and my BT headset worked perfect. But I can't remember now about what build that was, because later on I've updated my radio to few other releases.
Radio rom has NOTHING to do with the Bluetooth or Wifi - It's ONLY the firmware for the GSM chip.
xixfishxix said:
Even with the new WM6 roms - I have tried ALLLLLLLLLL of them the bluetooth phone quality sucks.
I am using the new Pdaviet 2.0.03 (something like that) and i have tried
THREE different headsets
Jabra BT250v
Jabra BT500
Jabra BT500v
All have the same crackly sound issue. But with my blackberry (ass phone, i HATE it) the sound is PERFECT.
I am soooooooooooooooooooooooooooooooooooooo tired of carrying two phones with me - i can not live without my memory (or i mean the universal, which i use as my personal assistant). But my clients can not live with the quality of the phone call connection. Now if I do not use my bluetooth and hold the GIANT universal up to my head (kinda like a military field radio) then the clarity of the call is great.
It is the Bluetooth stack i am 100% sure of it.
OMG Helmi_c let me have your widcomm stack PLEASE I will even pay you for it.
Click to expand...
Click to collapse
We know the MS BT stack is crappy. I found out today that Helmi_c is developing one. But, still, this thread should be more about how to resolve the BT stack change (or just shut it until our friend Helmi_c finishes his school stuff and gets back to being the ROM-N3rd in need of more RAM that we all love so much) than bringing up more issues about the MS BT stack.
Thanks.
guys,tried almost all roms on my universal,some of them works a few days,after 3 months i flashed with the good old official rom,better and stable than all
anyway,the only reason for this waste of time was this a2dp issue,being not able to listen music to my motorokr(tested with 2 laptops and 2 htc,working great)
so i think is just some kind of incompatibility motorokr-universal(yes,i try all the a2dp hacks/registry editing found here
I've heard about a bunch of new roms (the BLACK and LVSW) that have somehow cleared up that nasty A2DP bug in the Microsoft BT stack that caused certain headsets to buzz and hiss with certain frequencies.
I'm wondering if anyone here knows how that works, what has changed in these new Roms? Are they updated bluetooth drivers from MS?
I'm wondering if we can't put together a new a2dp patch for other devices so that additional phones can benefit as well, without getting a whole new rom (similar to the way the initial Tornado A2DP patch was circulated around).
Anyone have any info?
Can anyone even verify that this is true? (I don't have a hermes, but I do have an i.tech R35 headset with horrible distortion from any windows Mobile device playing music... I'm just assuming what I've heard is true about new roms fixing it...)
The only change is to some registry entries, the HTCustom tool should work on most any phone. Black's config tool should work but sometimes crashes on other roms when you try to save.
I have got the same problem with my iTech. I think it is something related to the design of the bluetooth headset. Is anyone experiencing the same problem with a solution?
nope maybe your release is a bad bath?
My Hermes with the Black ROM works fine with my Jabra BT620s. Hands-free mode works flawlessly too.
porkchop83 said:
nope maybe your release is a bad bath?
Click to expand...
Click to collapse
No no no, this is KNOWN issue with the MS stack and certain Bluetooth headsets, including the R35.
Its not the headset.
Proof is that when paired with another device, IE a nokia, or PC running bluesoleil, it works just fine- no hissing, very good audio quality.
Also, tested on a Wizard using the Widcomm stack instead of the MS stack, and sure enough it works GREAT!
So, its clearly a problem with the MS Windows Mobile stack, and in fact it has been discussed in various forums here.
Shadowmite, are you sure its just registry changes?
Is there any way to find out what they are?
Dishe said:
No no no, this is KNOWN issue with the MS stack and certain Bluetooth headsets, including the R35.
Its not the headset.
Click to expand...
Click to collapse
Correct. I had that problem with my Vodafone V1640 (HTC Universal). Kind of solved that problem using the Widcomm stack patch uploaded by someone here. Go search for it.
richardlai said:
Correct. I had that problem with my Vodafone V1640 (HTC Universal). Kind of solved that problem using the Widcomm stack patch uploaded by someone here. Go search for it.
Click to expand...
Click to collapse
Yes, I mentioned that I had it working with the Widcomm stack on a Wizard, but I'd rather have a working MS stack for various reasons including the Widcomm stack's instability on certain devices, and more importantly, its not available on the Tornado and Vox (or any smartphone), which is my device of choice at the moment!
So, once again, does anyone know what these new roms do to "fix" the problem?
Its gotta be something I can re-create...
Dishe said:
Yes, I mentioned that I had it working with the Widcomm stack on a Wizard
Click to expand...
Click to collapse
Sorry, I missed that part.
I didn't notice that Bluetooth performs differently in custom ROMs on the same hardware. If it is true, the ROM creators would know what they have done. Try contacting them directly if no one else here knows.
Hello all, well recently I bought some Sony DR-BT20NX headphones under the impression they were the best, so onto the problems:
I'm using leos latest 0.5AKU WM6 Rom and when using them with the default Rom the bluetooth headset can control the music that is pause etc but the music plays for 1 second if that at the beginning of the song then its interference. Any ideas?
Using the Broadcomm stack included in the Rom that you can install after seems to sortany bluetooth problems involving audio but destroys the GSM and the radio crashes 9/10times on boot forcing a soft reboot.
Secondly I'm using on my PC/Notebook with a "Integrated System Solution Corp." Bluetooth dongle with BlueSoleil software provided, with this im able to control WMP like on my device, but I don't even get the second of audio - its completely dead audio wise apart from a dull hiss.
So after paying £60 I'm none the happier with bluetooth
Any help would be appreciated, thanks!
Ok quick update, bluesoleil version 3.2 fails miserably at audio.
Using 5.0.0.0 now and it works.
Whats annoying is I have to pay for this update because they gave me effectively crippled software.
Ok so thats the PC side sorted, just WM6 to go.
Edit:
My USB stick came with version 2.x of the drivers, and when upgrading to 5.x it says the BDID of the bluetooth is already registered. Duh It came with 2.x, oh damnit now I can't get 5.x. Why would a company not want my money
spicypixel
Have you tried only WMP or other players on your Uni? Try CorePlayer and PocketMusic, they also support AVRCP.
P.S. Using a HBH-DS970, no problems with sound... Only problems with WMP sometimes
Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!
dreamtheater39 said:
Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!
Click to expand...
Click to collapse
Jetware causes skips for me
Skwyk said:
Jetware causes skips for me
Click to expand...
Click to collapse
Do this and it will work just fine -
1. Install JET ware.
2. Start the utility, go to advanced options and check all relevant ones
3. On the main screen, click on "Turn on bluetooth". If it is already Checked, uncheck it and then re-check the option
4. Soft reset (Use PSShutXp or something which does a software reset. do not use the hardware reset button)
5. After restarting, make sure you freshly pair up your headset (Delete the previous partnership on your uni, and also do a factory reset on your headset)
6. Once paired, it should work just fine.
let me know if it works...also make sure you use the latest version (v1.31 i guess)
-San
Import this reg file...
Hi,
Import this .reg file, and it should work fine ;-)
San
dreamtheater39 said:
Hi,
Import this .reg file, and it should work fine ;-)
San
Click to expand...
Click to collapse
will this fix work for a uni with wm5
R 1.09.00
G 42.42.p8
D 1.30.107.wwe
Also if someone could point me towards an explanation
of what these mean cause yes im a nab/nube
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone