Related
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
calvinljh said:
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
Click to expand...
Click to collapse
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
frrfba said:
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
Click to expand...
Click to collapse
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Yea we have.. go ahead and flash
calvinljh said:
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Click to expand...
Click to collapse
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
Hi Hdubli, can I have download link please,
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
TheEvilVirus said:
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
Click to expand...
Click to collapse
To correctly have a good "start" after first rebbot, keep pda disconnetcted from everything.
After calibrate screen, extrom install all the cabs in the rom and after reboot it works good everything.
Keep in kind that the rom is tested (in italian) for 3 weeks withou any problems, let us know if need help.
ciao
Everything works fine for me too now. Thank you for the ROM, great job. Love the new build, it's much finger friendlier!
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
bro, can upload original e100 rom ? pls help
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
TheEvilVirus said:
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
Click to expand...
Click to collapse
Bro, this is bug issue, never flash your ROM before you ensure you get your original WWE ROM as default.....
Most importan part, no one is response when my first post, and "they" always told to "flash it, any problem is advise". <--- this part is very funny.
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
TheEvilVirus said:
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
Click to expand...
Click to collapse
Are You using Xp, Vista or else?
Can You check if ActiveSYnc is disconnected when screen goes black (timeout on backlight)? Don't let that Windows Mobile adjust backlight but set it!
In my case never found this kind of problem, but I see in various forum that 6.5 build in some case goes with this problem, for example I got that situation with Vista and with original rom 21840 build.
Apologies for the slightly off topic post, but I don't suppose you guys know of any updated ROMs for the beTouch E200 do you? Would like to get an updated version of WM6.5 on this thing...
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
TheEvilVirus said:
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
Click to expand...
Click to collapse
Hi TheEvilVirus, can I know where you download the original WWE ROM?, I need as my backup too. thanks thanks.
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
TheEvilVirus said:
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
Just PM Me .
TheEvilVirus said:
Just PM Me .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
Today I had several reboots on my Desire. After the third I decided to do a hard reset.
Since rebooting the Android Market has been REALLY slow.
It will find apps and let me install them, however the screen doesn't change after the install - it keeps saying installing. The only way to remove the "installing" message is to reboot
I have tried several reboots, reflashed the stock T-Mobile UK ROM and I have formatted the SD card, but none of these have fixed it.
I get the same using WiFi or mobile internet (vodafone UK)
Anyone having the same issue, or got any ideas how to resolve it??
Cheers
Zippyioa
Delete please..
See below...
Try THIS!
If not then just wait as the Market on googles servers needs time to catch up with the diffrent build numbers changed, since a flash i belive
Mine took personally after everyflash at least a hour to start even working a bit.
EDIT: Maybe if it carries on being very slow, maybe something happened in the flash whilst in recovery, and has written some data to some bad sectors, causing this issue << only spectulation tho!
zippyioa said:
Since rebooting the Android Market has been REALLY slow.
It will find apps and let me install them, however the screen doesn't change after the install - it keeps saying installing. The only way to remove the "installing" message is to reboot
Click to expand...
Click to collapse
Thanks for the link, but I tried that already (after searching for this issue!)
It didn't resolve either issue for me (the slow market, or the installing issue) nor did other threads, hence me starting this one.
Any further help would be appreciated
Zippyioa
potter1984 said:
Delete please..
See below...
Click to expand...
Click to collapse
Please don't!
See above.....
zippyioa said:
Please don't!
See above.....
Click to expand...
Click to collapse
Lol, i ment delete my post
Then referred to my second post.
Soz for the confusion
Still having this issue.
I have tried the close market place and clear cache/data idea, but no joy
I have now re-formatted (after a factory reset and clearing storage in bootloader) but it still sticks on installing in market even though the app installs fine.
Please help!
Slow for me today as well, stock Desire.
Maybe give it a day?
Okay, its been a few days now and I am still having the never ending install and slow market issue.
Surely I cant be alone??
Hi all, I was trying to uninstall some of the softwares from my S3, I uninstalled some of them, those are some tmobile softwares. But I soon found out when I restarted my phone it just stuck at the "samsung" logo.I tried to install a rom to resolve the problem but odin just kept showing that "FAIL". I reinstall a clockworkmod.tar by using odin( I don't know why I did that...><). But when it finished and restarted again it could no long turn on again. Can anyone help me with this problem? I just bought the phone yesterday and I already went to exchange for a new one couple hours ago, no sure tmobile would let me exchange it again. PLEASE HELP ME!!!
You first might wan't to post in the right forum. You have the t-mobile variant, so go to your community and get out of ours... Please
sq234 said:
Hi all, I was trying to uninstall some of the softwares from my S3, I uninstalled some of them, those are some tmobile softwares. But I soon found out when I restarted my phone it just stuck at the "samsung" logo.I tried to install a rom to resolve the problem but odin just kept showing that "FAIL". I reinstall a clockworkmod.tar by using odin( I don't know why I did that...><). But when it finished and restarted again it could no long turn on again. Can anyone help me with this problem? I just bought the phone yesterday and I already went to exchange for a new one couple hours ago, no sure tmobile would let me exchange it again. PLEASE HELP ME!!!
Click to expand...
Click to collapse
sorry I posted this in the wrong forum.....
sq234 said:
sorry I posted this in the wrong forum.....
Click to expand...
Click to collapse
If you see this post, you should just reflash your current Rom or any Rom will replace all the files you altered or deleted. Might undo all that you just did, but that's better than having a phone that doesn't boot.
Brandonrz said:
You first might wan't to post in the right forum. You have the t-mobile variant, so go to your community and get out of ours... Please
Click to expand...
Click to collapse
You do know they're the same damn phone right? The solution to they're problem would be the same regardless. You could always help. Haha go to your community. U should take ur own advice and check out androidcentral or something
Avoid the hassle if you don't get help and send it to sammy replacements are free. I bricked a few phones and called sammy and said it just stop working after update and they shippped a box to me to send my phone and they just sent me a new phone. One year factory warranty is free
Sent from my SPH-L710 using XDA Premium App
Did you flash the sprint cwm through Odin?
This doesnt sound like a complete brick. Odin is pretty smart these days and avoids flashing the wrong stuff. And the recoveries are interchangeable between the us variants. that wouldnt of caused a brick
billard412 said:
You do know they're the same damn phone right? The solution to they're problem would be the same regardless. You could always help. Haha go to your community. U should take ur own advice and check out androidcentral or something
Click to expand...
Click to collapse
Just if it's a known problem, or point him to the correct downloads to restore to stock instead of our community just assuming. And don't worry what I do. I always post in the right forums.
Sent from my SPH-L710 using xda app-developers app
I accidentally formatted everything from my phone. I was in CWM and I formatted everything, and now I basically do not have anything on my phone at all. After the LG boot up logo, the phone goes blank. I'm able to go into download mode. I tried following this method http://forum.xda-developers.com/showthread.php?t=2420219, I keep getting failed previousload() a few seconds after clicking the top left yellow icon in LG flash tool. Anyone have any idea whats going on or how to fix this? LG E988.
aisforadam said:
I accidentally formatted everything from my phone. I was in CWM and I formatted everything, and now I basically do not have anything on my phone at all. After the LG boot up logo, the phone goes blank. I'm able to go into download mode. I tried following this method http://forum.xda-developers.com/showthread.php?t=2420219, I keep getting failed previousload() a few seconds after clicking the top left yellow icon in LG flash tool. Anyone have any idea whats going on or how to fix this? LG E988.
Click to expand...
Click to collapse
Copy a compatible ROM to your memory card and start CWM to flash the ROM you have just copied.
Hope this helps.
Addicted2xda said:
Copy a compatible ROM to your memory card and start CWM to flash the ROM you have just copied.
Hope this helps.
Click to expand...
Click to collapse
Thanks for your reply, however i finally managed to solve the issue. I sideloaded a custom rom using adb. Phew!
aisforadam said:
Thanks for your reply, however i finally managed to solve the issue. I sideloaded a custom rom using adb. Phew!
Click to expand...
Click to collapse
What section did you find your fix in? My friend did the same thing to hers and I can't find the command line.
Sent from my VS980 4G using Tapatalk
cj2566 said:
What section did you find your fix in? My friend did the same thing to hers and I can't find the command line.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Hi I didn't find it in one particular section, I had to search everywhere, i spent a good 8 hours straight searching as I really needed my phone to work. I will try my best to start you off though.
I started here.
http://forum.xda-developers.com/showthread.php?t=2559200
Watched this.
http://www.youtube.com/watch?v=dWXHD7PlaQc
That's basically all you have to do. I did, however, run into plenty of issues along the way which is what took up all if not most of the 8 hours. What I did was google each and every issues that occured and I always found answers to it (with some added trial and error).
Here are some of the issues I faced while sideloading that you or your friend may come across.
''device not found''
''cannot read file''
Both of which can easily be solved by googling. I hope I guided you in the right path, feel free to pm me if you need anymore help.
aisforadam said:
Hi I didn't find it in one particular section, I had to search everywhere, i spent a good 8 hours straight searching as I really needed my phone to work. I will try my best to start you off though.
I started here.
http://forum.xda-developers.com/showthread.php?t=2559200
Watched this.
http://www.youtube.com/watch?v=dWXHD7PlaQc
That's basically all you have to do. I did, however, run into plenty of issues along the way which is what took up all if not most of the 8 hours. What I did was google each and every issues that occured and I always found answers to it (with some added trial and error).
Here are some of the issues I faced while sideloading that you or your friend may come across.
''device not found''
''cannot read file''
Both of which can easily be solved by googling. I hope I guided you in the right path, feel free to pm me if you need anymore help.
Click to expand...
Click to collapse
THANK YOU! This helps more than you know.
Sent from my VS980 4G using Tapatalk
So after a few months of using my google pixel 2 xl, while I was using it I randomly got a black screen with the message:
"Your device is corrupt. It can't be trusted and may not work properly.
Visit this link on another device: g.co./ABH
PRESS POWER BUTTON TO CONTINUE".
Now it happens every time I turn on my phone. :/
I Have tried doing a factory reset and it still appears.
My phone is not rooted, I have the official OS that I got it with it (updated it through the phone's updater).
The phone was purchased directly from the us google online store.
I've tried to contact their support but they didn't have a solution.
Please help me!!
almogsad said:
So after a few months of using my google pixel 2 xl, while I was using it I randomly got a black screen with the message:
"Your device is corrupt. It can't be trusted and may not work properly.
Visit this link on another device: g.co./ABH
PRESS POWER BUTTON TO CONTINUE".
Now it happens every time I turn on my phone. :/
I Have tried doing a factory reset and it still appears.
My phone is not rooted, I have the official OS that I got it with it (updated it through the phone's updater).
The phone was purchased directly from the us google online store.
I've tried to contact their support but they didn't have a solution.
Please help me!!
Click to expand...
Click to collapse
Sounds like one of those non harmful, annoying messages at boot up. Is your bootloader still locked I assume? If so, have you tried side loading the March OTA. I think sometimes during the OTA updater process that some files don't always make it to the system, which is why you get those messages. Is your phone still functioning properly??
Badger50 said:
Sounds like one of those non harmful, annoying messages at boot up. Is your bootloader still locked I assume? If so, have you tried side loading the March OTA. I think sometimes during the OTA updater process that some files don't always make it to the system, which is why you get those messages. Is your phone still functioning properly??
Click to expand...
Click to collapse
First of all thanks for the response!
yes my bootloader is still locked.
Badger50 said:
have you tried side loading the March OTA
Click to expand...
Click to collapse
How do I do that? ^^
and it seems like the phone still functions properly, but I guess only time will tell
almogsad said:
First of all thanks for the response!
yes my bootloader is still locked.
How do I do that? ^^
and it seems like the phone still functions properly, but I guess only time will tell
Click to expand...
Click to collapse
Just follow these instructions if you want to side load an OTA. It's really not that hard ??
https://developers.google.com/android/ota
Badger50 said:
Just follow these instructions if you want to side load an OTA. It's really not that hard
Click to expand...
Click to collapse
Thanks! I'll try that...
Do you think it might fix the problem?
Edit:
it says in the guide:
"find the appropriate driver for your device from the OEM drivers"
but I don't know which one is mine ^^
almogsad said:
Thanks! I'll try that...
Do you think it might fix the problem?
Edit:
it says in the guide:
"find the appropriate driver for your device from the OEM drivers"
but I don't know which one is mine ^^
Click to expand...
Click to collapse
Once you choose the proper OS version for your pc, and install SDK, when you plug your phone in, it should automatically update your device drivers :good:
And yes, there's a good chance it'll fix your problem. Never any guarantees with this tech stuff though
Badger50 said:
Once you choose the proper OS version for your pc, and install SDK, when you plug your phone in, it should automatically update your device drivers :good:
And yes, there's a good chance it'll fix your problem. Never any guarantees with this tech stuff though
Click to expand...
Click to collapse
Hey! It seems like it worked!!!! Thanks!!
I only wish I hadn't listened to the google support team , and hadn't done a factory reset to phone before lol they don't seem to understand too much about their phones, the guy told me he thinks it's just an add
Thanks again man!
almogsad said:
Hey! It seems like it worked!!!! Thanks!!
I only wish I hadn't listened to the google support team , and hadn't done a factory reset to phone before lol they don't seem to understand too much about their phones, the guy told me he thinks it's just an add
Thanks again man!
Click to expand...
Click to collapse
Oh sweet! Glad to hear it my friend, well done. Now you can help others out with the same issue if it comes up :good: Yeah, the Google folks are kinda funny sometimes. The factory reset is their standard MO! And right, an add on the boot up screen....yeah that's funny! I'd be willing to bet most of them use iPhones!!??????
Badger50 said:
Oh sweet! Glad to hear it my friend, well done. Now you can help others out with the same issue if it comes up :good: Yeah, the Google folks are kinda funny sometimes. The factory reset is their standard MO! And right, an add on the boot up screen....yeah that's funny! I'd be willing to bet most of them use iPhones!!
Click to expand...
Click to collapse
How ironic! lol ???
Badger50 said:
Sounds like one of those non harmful, annoying messages at boot up. Is your bootloader still locked I assume? If so, have you tried side loading the March OTA. I think sometimes during the OTA updater process that some files don't always make it to the system, which is why you get those messages. Is your phone still functioning properly??
Click to expand...
Click to collapse
Thanks!! I also had this issue and following your suggestion to sideload the latest OTA, it appears to have fixed the problem.
I've been getting the same corrupt error on reboots on my xl 2(also not rooted), but I have not been able to get the latest OTA to sideload. It nearly completes but aborts last second and gives a Status 1 error. I'm not sure what I'm doing wrong here. Any help will be appreciated.
Got a similar run-around with Google support. When the factory reset was unsuccessful, they've recommended replacing the phone since it's under warranty, however they think replacing my virtually brand new phone with a refurbished phone is appropriate.
Apsel said:
I've been getting the same corrupt error on reboots on my xl 2(also not rooted), but I have not been able to get the latest OTA to sideload. It nearly completes but aborts last second and gives a Status 1 error. I'm not sure what I'm doing wrong here. Any help will be appreciated.
Got a similar run-around with Google support. When the factory reset was unsuccessful, they've recommended replacing the phone since it's under warranty, however they think replacing my virtually brand new phone with a refurbished phone is appropriate.
Click to expand...
Click to collapse
Are adb/fastboot tools the very newest?
Apsel said:
I've been getting the same corrupt error on reboots on my xl 2(also not rooted), but I have not been able to get the latest OTA to sideload. It nearly completes but aborts last second and gives a Status 1 error. I'm not sure what I'm doing wrong here. Any help will be appreciated.
Got a similar run-around with Google support. When the factory reset was unsuccessful, they've recommended replacing the phone since it's under warranty, however they think replacing my virtually brand new phone with a refurbished phone is appropriate.
Click to expand...
Click to collapse
Unlock then re-lock your bootloader(/s) maybe?
Great job guys, this solution with sideload latest OTA worked for me too with no need to unlock bootloader! :good::good::good:
I can confirm this working again. Pixel 2 XL with 9.0 and November security update.
Thanks!
I just had the corrupt message pop up (bootloader locked), and the sideload ota update seems to have worked!
michaelbsheldon said:
Are adb/fastboot tools the very newest?
Click to expand...
Click to collapse
I'm experiencing the same problem as Apsel, yes the adb/fastboot are the latest.
Error applying update: 15 (ErrorCode : kNewRootfsVerificationError)
E:Error in /sideload/package.zip (status 1)
Badger50 said:
Just follow these instructions if you want to side load an OTA. It's really not that hard ??
https://developers.google.com/android/ota
Click to expand...
Click to collapse
I know this is an old post but I'm having the same issue. Also cannot connect to pc due to, I'm assuming daughterboard issue this and previous pixel models have. I have been rooting phones since the S3 and am no virgin to the sdk. I tried to take it to ubreakifix which was a 4 hour round trip for me. I was told I would have to sign a waiver since the screen is glued to the phone and that was the only way to get to the internals. When I arrived I watched 4 bozos poke at the charging port for 20 min and then contradicting what I was told the night before over the phone that they were not comfortable doing the repair and then they tried to sell me a new device. I just got off chat with google and they want to charge me 270 dollars to fix even though I went to an authorized service center when it was in warranty. Will fastboot work over wifi?
Toolmighty said:
Will fastboot work over wifi?
Click to expand...
Click to collapse
'fraid not. Both the bootloader and recovery have stripped down hardware support, limited essentially to the display and storage. Neither has WiFi support that I know of, thus you have to use a USB cable.
I figured it out after I figured out how to fix the daughterboard issue w/o replacing the daughterboard. Verizon are some sneaky *^&$^s. Thx for the reply tho. I'm sure ur quite busy.