Develop Bugs

Cannot enter bootloader

I have a small problem. My phone will not enter bootloader. I am trying to upgrade the rom to Schap's however I can see which IPL and SPL versions I currently have. The problem is that my side OK button does not work.
Any help would be greatly apprecieated.

Try this:
http://wiki.xda-developers.com/index.php?pagename=GetDeviceData

markafreeman,
Thank you very much for the link. I have been search all over for that.

Your welcome, if that doesn't give you the information need unzip this file and copy the exe to your device then run it and it should take you into bootloader mode.

[SOLVED] Enable all options in debug tool make device go always to bootloader mode.

I enabled all the options at debugtool and now it goes always to bootloader.
Any idea how can i make my device boot succesfully to os ?
I try set 14 0 but nothing.
Can i change that values via bootloader command prompt ? I search all the forum there is no info about that.
Thanks

Someone to provide some help please ?

Someone to provide some help please ?
Also when i execute the boot command it just shows up the TOUCHdiamond bootsplash screen but the info to the left cornel is not show up and stops there.

lapator said:
I enabled all the options at debugtool and now it goes always to bootloader.
Any idea how can i make my device boot succesfully to os ?
I try set 14 0 but nothing.
Can i change that values via bootloader command prompt ? I search all the forum there is no info about that.
Thanks
Click to expand...
Click to collapse
I saw your PM - this is fixable, but please tell me which SPL version you have currently

I finally fix the Auto Boot problem thanks to cmonex. He just send me a bin file and flash it via bootloader.
The bootloader that i had was Hard Spl 1.93 Olinex.

if anyone else has the same problem, then you can proceed in two different ways
- if you have MFG (1.40.OliNex) bootloader, then via mtty or qmat, simply issue the command "eraseconfig" (without the quotes)
- if you don't, then I can send you the mentioned bin file, after changing the backup CID setting to yours in it. let me know in a post or PM.
conclusion: before playing with debugtools, make sure you have MFG bootloader as it is much easier to fix it that way.

htcupdate.zip

hi, I need to return to stock for warranty purposes, but my problem is everytime I try an ruu it gives me a usb error, so I am trying to use the manual method where you extract the rom.zip rename it and put it on the storage then in bootloader mode the phone automaticly finds it and updates.
so my question is what do I need to rename the rom.zip?
in the bootloader it says "loading HTCUpdateZipName Image..."
so what do I rename it to HTCUpdate? I don't know
any help would be much appreciated

Secure Booting Error! Cause: boot certification verify

Good day mate. My brick phone is F460S variant. I got this error when I tried to go back to Lollipop using Lg flash tool 2014, it got stuck on 5% and remove usb cable and start again, after that I got this error Secure Booting Error! Cause: boot certification verify.
No download mode
No recovery
anyone can help me please?:crying:

anyone?

You have triggered the downgrade QFUSE. There is nothing you can do apart from trying to unbrick it like it was dead, but that's not guaranteed to work. You should have researched more before attempting this. My prototype doesn't have a QFUSE, so i am free to downgrade via TOT to kitkat or lollipop.

西村大一 said:
You have triggered the downgrade QFUSE. There is nothing you can do apart from trying to unbrick it like it was dead, but that's not guaranteed to work. You should have researched more before attempting this. My prototype doesn't have a QFUSE, so i am free to downgrade via TOT to kitkat or lollipop.
Click to expand...
Click to collapse
What does QFUSE mean?

anmino said:
What does QFUSE mean?
Click to expand...
Click to collapse
I second you on this. I just uninstalled MultiROM and got the secure booting error. Depending on the ROM you have, find a bumped kernel and flash it. Most of the kernels on XDA are pre-bumped unless the developer states so. Boot into recovery, tutorials on the internet, then flash the kernel and voila.

if you can use twrp or you're able to flash, use mr_bump.zip: https://mega.nz/#!DNwhRBrK!Ki6zIzXca0KjPShi6L2oaCYIr0CkmH8sEymEt-0Q3ys
oh sorry, I didn't see "no recovery".

HardStyl3r said:
if you can use twrp or you're able to flash, use mr_bump.zip: https://mega.nz/#!DNwhRBrK!Ki6zIzXca0KjPShi6L2oaCYIr0CkmH8sEymEt-0Q3ys
oh sorry, I didn't see "no recovery".
Click to expand...
Click to collapse
Yes, no DOWNLOAD mode and RECOVERY mode.. Anyone have an idea how to fix this?

anyone?

Hello, i got the same probleme and i've trying a lot of things but not resolved..
My phone is a LG G3 Beat F470s..
Please help us..

Dowblnload adb and fastboot drivers
Download laf.img for your device
Download LG Drivers
Get you G3 to fastboot mode. Hold volume up and connect it to PC
Open fastboot and adb folder in PC, ctrl+shift+right click and open cmd. Type fastboot devices...if ur device is listen then proceed, if not u did not do something cotrectly...if yes just flash laf img to your G3 and voila

I remember me that I was in the same situation:
No TWRP, no download mode, so i have use in pat this thread:
https://forum.xda-developers.com/showthread.php?t=1752270
And an other that i haven't found again (xda thread), in some lines:
=> download the last img file from: https://eu.dl.twrp.me/d855/
=> no download mode available so no possibility to flash manually twrp file from an LG Flash Tool
==> so setup an adb connexion to the phone, cp command to copy the img file on the sdcard or where you want
=> command: "flash recovery twrp-2.8.x.x-xxx.img" (https://www.xda-developers.com/how-to-install-twrp/
=> if it's as worked, you could reboot manually in twrp, make again the partitions if needed and flash any ROM.

"Start Up Failed" after flash

Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of ​​what to do?
Tks!

riickseven said:
Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of ​​what to do?
Tks!
Click to expand...
Click to collapse
Download Your Latest ota zip from
https://mirrors.lolinet.com/firmware/moto/channel/official/
then flash via rsd lite that will fix your phone and reset it

Help download
motorola/aljeter/aljeter:9/PPPS29.55-35-12-3/a0b9b:user/release-keys