Programme v 1.09 help! - Upgrading, Modifying and Unlocking

Downloaded this file to a new XDA windows '02 and the phone does't respond to syncing or navigating. Can't turn it off without running the battery down. Any ideas where to start? Any help would be appreciated. Thanks,
deuce52
I got it from a friend who said it was from XDA Developers, that it would update the RS to 4.21, the RUU to 3.17.03 and unlock the phone. Last night in RomKitchen I backed up the rom thru the bootlogger and warm booted and it works and syncs
now. It is still locked though.
ROM version A.30.09 ENG
ROM Date 01/01/04
Protocal version 324e2
Radio version R. 4.01

What is programme 1.09?
And...why three threads? Maybe delete the other two?

Programme v. 1.09 comes up when the update is started

Related

Vario 2 wm6 downgrade

I have a problem. I've installed the shaps 4.0 version wm6, my radio: 1.50.0.0
extRom: 3.60.20070822. And now i will to downgrade wm6 to my former wm5. It's from T-Mobile and so i downloaded: HER_TMDE_1211113_1050200_GER_SHIP
>ROM< but if I start it, it verifys the information on my HTC and a tri-color display appears. After some time the error comes: your phone isn't connected to the USB and so forth... I don't know what to do, maybe you can help me.
Greeting
use the custom ruu
I can't use it because i have a warranty. Can you give me the link of ruu wm5 t-mobile GER please?
mdavario2 said:
I can't use it because i have a warranty.
Click to expand...
Click to collapse
Not any more you don't if you flashed it with an unofficial ROM!
I hope you HardSPL'd it first...
Here is Mrvanx downgrade guide. Shipped WM5 ROM upgrades can be found in Hermes Wiki (which I can not access now due to some strange error). Your warranty is certainly void when you flash unofficial ROMs (of course if you hand it in for repairs with unofficial ROM installed), if you SuperCIDed your device and so on.... If you are not supercid and you can downgrade both windows and radio you should be ok. Be careful though - downgrading is quite risky.
Ok thanks a lot. One question more: is it normally that i'm unable, i have radio 1.50, to install other radio versions? I already tried to install 1.20 version but without succes.
The problem is that I can only install RUU_... ROMs and Radio, but I don't know why???
Secondly I didn't make SuperCID and HardSPL I only selected if I installed the Shap's ROM, how can I see that I don't have any warranty?

HELP: Cooked ROMS won't flash

I have Orange branded spv m700 and have unlocked and supercid'd the device using pof's tool. I then added HardSpl (Olipro 1.20). All appear to have loaded fine - phone is unlocked and Olipro shows up when put into bootloader.
So, the problem - every time I flash a cooked ROM (Ausdim, NiAx, FiNixNover...?) it won't boot past the first screen. I can rescue the situation by putting device into bootloader and flashing the official WM6 ROM (no radio, no ipl....) and it boots up just fine.
Can anybody help or at least point me in the direction of some good advice?
hmm... odd... can you list step by step what your procedure is for flashing the ROMs
I've done lots of devices - old XDA2i, SPVM600, wifes SPV M700 (unlocked, hard spl etc and flashed away!
This particular device shows IPL 0.50 & SPL 1.20 Olipro. It is unlocked (have o2 sim working in it), and should be SuperCid (I checked the box and radio shows as 1.16.00.00 - pof's patch I believe?). I also re-run HardSpl and Pof's unlock/supercid patch just in case it hadn't flashed properly.
I generally just download ROM and flash via RUU. Occasionally I get the device not responding error so I just re-run RUU from the bootloader screen.
Have tried WM 6.1 and 6.0 cooked roms but all show initial boot screen (numbers along bottom) next screen and then frozen, have waited and waited and nothing. Also, it would not flash back to Mozzers WM5 Orange UK ROM - same symptoms. I thought it was bricked, but the Dopod WM6 flashed perfectly.
Hope that helps - thanks for looking into my problem.
anybody please? por favor........
hmm.. i remember someone having a similar problem but it was some time ago..
two things to try just in case...
1) i'd manually go to bootloader (hard-spl) before flashing
2) Have you tried to flash from SD card? this method seems to provide less problems..
let me know how it goes..
A degree of success - managed to flash WM6 AX3L. All seems to be working. As I recall this is very similar to the official ROM and I used to use it last year because it is very stable. Think I moved on because of the missing email accounts problem. Will happily keep it if I can sort the email problem out. Never really had much fun with the hard reset after loading method - is there another/better way? Just wondering.
Also, now I have a "cooked" rom loaded perhaps it will stop being so sensitive.....!!
How strange! Have just flashed Akeo's new Diamond port ROM and no problems. Not only that, the ROM is FAB!!!

herm200 wont send text messages!

i flashed wm6.1 tnt to my hermes a few days ago and it worked like a charm, for a week atleast, till yesterday when it started delaying sending text messages, since texting is what i do all the time, it got pretty irritating, i thought it might be congestion from my service provider so i called em up and lodged a complaint, however when i shifted my sim to a nokia the messages started going fine, now thinking it might be a rom problem i flashed the official htc 6.0 rom but it had the same problem and then i downloaded crc_r11 rom which is the best one ive had as yet, it worked fine for about half a day and now its started giving me the error, 'text message cannot be sent' and that too after like a minute or two of trying to send it, shifting the sim to another phone fixes the problem... does anyone know a solution to this? my ipl is 1.04 and spl is 1.40 olipro
right now im downgrading to wm5 to see if that fixes the problem but i really loved crc v11
could this be a radio rom problem?
Yes. what radio are you using?
best practice is to flash with your carrier's shipped rom, and then upgrade/downgrade radio and then flash with crc's which I love too!
guess what. i just went into device information to check which radio rom version i have and.... its all blank! no rom version no radio rom version no protocol version no rom date! in the next window that has information on memory and colours etc theres a load of random characters. i mean nothing readable. and in the outgoing and incoming call timer fields it says 'unknown'
whats going on :s
i just hard reset my device
got this
radio version
1.48.00.10
See how you get on with your Radio showing up now. If you want to change make sure you follow the guidlines in the WIKI as upgrading the Radio is the most dangerous thing you do with your phone. (unless you take it high board diving with you... )
which radio rom version shud i use then in your opinion?
i just downgraded my phone to the stock vodafone rom that it came with and the radio rom version is 1.32.00 however the wm6.1 roms are 1.48 as i told u before, shud i install them new windows and then downgrade the radio rom?
i tried what zocster said, flashing vodafones wm5 rom downgraded my radio rom to 1.32 and then i upgraded to crc 11 and the radio rom stayed the same so all systems go till now
thanks guys!
d3aded said:
i tried what zocster said, flashing vodafones wm5 rom downgraded my radio rom to 1.32 and then i upgraded to crc 11 and the radio rom stayed the same so all systems go till now
thanks guys!
Click to expand...
Click to collapse
Glad able to assist let us know how you get on.

Help!! - Can't Upgrade anything on my Diamond

Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)
I get EXACTLY the same... i've tried everything (except a hammer) to fix it.
I'm running
Rom: 1.37.707.1 wwe
Radio: 1.00.25.03
Proto: 52.26a.25.09h
I'm also using Vista 32
(all fresh out of the HTC box)
http://forum.xda-developers.com/showthread.php?p=2338991
Are you running Vista X64 coz i had the same error in it ..
try to flash it with xp!
udayrulz said:
Are you running Vista X64 coz i had the same error in it ..
Click to expand...
Click to collapse
... Running Vista Ultimate 32bit, but not sure if that will make a difference...
I will try to get hands on XP computer tonite....
You can always try running the RUU update utility in WinXP32 compat mode.
What Hard SPL ar eyou using???.... usually the problem...
you will need Developer edition if the ROM is not signed.
developer edition worked for me on Vista 32. Thanks guys!
OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.
Monty Burns said:
OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.
Click to expand...
Click to collapse
Yeah, but for me the problem still is to get ANY HardSPL on the Diamond in the first place.
I was trying to put HardSPL 1.38_Signed to the phone...
Adwinp: thanks for the advice, but did not work either...
As far as i can tell, this may be a problem with the USB driver from the Windows mobility center software...
I will try on real XP and give you feedback tomorrow.
thanks guys.
Doctor_Who said:
...
I was trying to put HardSPL 1.38_Signed to the phone...
...
Click to expand...
Click to collapse
The developer edition i.e. unsigned worked for me.
I am currently going through the stages in the wiki VERY closely. Dont know if they will work :/
Doctor_Who said:
Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)
Click to expand...
Click to collapse
I had the exact same problems. I tried every possible combination of Hard SPL and ROMs. Here is what worked for me in the end (no problems since):
1. install newest .Net 3.5 on windows PC (don't know if this has anything to do with my problems but after installing everything started working fine)
2. install Unsigned HardSPL (developer edition): http://forum.xda-developers.com/showthread.php?t=400950
3. install chosen ROM / Radio ROM with RUU (Rom Updater Utility): http://forum.xda-developers.com/showthread.php?t=396073
After flashing a ROM the device makes a hard reset so you should backup your data first! http://forum.xda-developers.com/showthread.php?t=299705
good luck!
Finally it worked, also thanks to all who replied in this thread.
So i like to share my experience in this:
1. first i downloaded all SPL and Radio i could find, then i looked for GER language Rom. Quickly decided for DPT V2.
2. First attempt to flash failed completely on a Vista PC (32 Bit Ultimate)
3. Back home, moved all the downloaded files to my XP SP2 PC..
4. Noticed: DiamondCustomRUU would not start in XP, got error message saying "... could not be initialized", so i tried the standard RUU instead, with the shortcut of manually putting the PDA into Bootloader mode...
5. Sucessfully flashed HardSPL 1.38 on the Diamond, and the device rebooted with Hard reset.
6. Next i tried to upgrade Radio to .05 Version... Failed, stuck a 0%
7. Changed SPL to 1.40 (Unsigned), now the Radio could be flashed. Seems that Radio Files are Unsigned?
8. Flashed DPT V2. Success.
But still wondered about the unsigned Radio file...
Again, thank you all
-------------

DIAM200 and ROM Upgrade

Hi
I successfully upgraded my Wizard, Hermes and TyTNII in the past but it all seems v confusing for the Diamond. All posts on xda seem to refer to Diamond other than the 200 version, which I got on TMobile UK.
I think I successfully upgraded to HardSPL - when in bootloader mode, it reads SPL-1.38.OliNex (it used to be SPL1.37.0000)
Is there any restriction as to what Radio and Rom I can upgrade my device to? I used the signed version of SPL, if it helps.
Please don't ask me to "search", I have just done that for days but there is no one place with all the info, I used modmydiamond.info thing but I got stuck at 0% having followed the instructions, and as I said there seems to be no advice at all for DIAM200 series. I also attempted to upgrade the radio to 1.00.25.05 - I seem to be running 1.00.25.03 as I write - I got stuck at 0% and went into the recovery mode, so no luck all round... What is the problem? Could someone tell me what the official TMobile UK Radio version is? Not sure if mine is the original one or the one I attempted to upgrade to.
thanks
see.
my.
sig.
seriously. if you had searched you would have found this. this has been asked incredibly often by an insane amount of users. well as i said. see my sig.

Categories

Resources