Hi!
This morning my daughter stepped on my Brand new Qtek9090 and left af long crack in the screen... an of cause it doesnt work anymore :-(
I still have a Qtek2020 with a working screen, does anyone know if I can use the screen from the Qtek2020 on the 9090? And can I change it my self or is it better not to?
Thank you!
Peter
Related
Hello,
I bought an MDA III on eBay. Came with an English ROM.
Recently, the screen got smashed (was run over by a car). Thankfully, it seems only the screen was smashed and the phone/PDA is still okay. I can even still syncronize it with my computer. I just can't do anything else with it because the screen isn't visible.
My question... How should I go about getting this fixed? Is it possible to buy a replacement screen and fix myself? Is there a vendor that can fix for me? I would ask the origianl manufacturer, but it is German.
I'm attaching a picture of it to give idea of the damage.
www.pocketpctechs.com
Wondering if anyone can help me with this or has experienced the same...
I got a used XDA Orbit with a cracked LCD screen, when I booted it up the screen came on and was partially usable above the crack. I decided to order a new screen to fix it, and after putting the new one in the screen doesn't light up at all. I thought, maybe the new screen is bad, so I put the old screen back in but it won't light up either. Any ideas?
FYI I have experience in repairing cellphones and flashing and unlocking, etc., and I have learned ALOT from xda-developers (thanks all you guys, you are incredibly helpful, generous and intelligent!). I'm stumped on this situation, is there something I need to reset or a pressure/contact screw that needs to be in place before the screen will light up? I appreciate all responses!
I have exactly the same problem.
After case change from O2 Orbit to Artemis case the screen does not light up at all and there is nothing to see on it. The device boots normally and the touchscreen reacts under Activesync.
I changed to a new screen with the same result and also flashed the ROM with SD-method... the screen remains dark while the device works.
Maybe the antenna contacts of the backcase have all to be fitting, closin some "case open" detection circuit" so the device starts electric power for the screen?
Any help appreciated, love my P3300/Orbit.
Hello, I am from Poland, so please, respect my mistakes.
I have bought MDA Compact III. Everything is working, i have bought new LCD. The keyboard is fine, and light are working. If I touching the screen is working. The biggest problem is, that screen is all the time black...is not working. The AC connection is fine, charger as well. What is going on?? What is the problem?? and what is the solution !!??
Thanks for help...
Hi all,
my BA and me spent 5 nice years together, during that period I have changed 3 screens and had no other problems but recently BA suprised me (just few months after the last screen replacement) with weird problem.
Screen work, digitizer work but funny, it usually miss the place where I touch the screen 5 around 5 mm to the right, then I draw a note for eg and moving right line I draw lags after the stylus, after I start to draw to the left everything is fine. Up and down is fine too. If I align everything is fine for a some time but when I try it later its messed up again.
I tought that its software problem but after the hard reset nothing changed.
Is this problem familiar to anyone? Is it a time to change a screen again?
I dont believe that its worth, BA is rather old phone but I have previous screen with good digitizer and if you say that I should try to change a digitizer I ll try it (any manual for that? I saw just 4 contacts but covered with plastic and digitizer seems to be glued to the screen)...
Any ideas before I burry my beloved BA
thanks, best regards to BA community and special greetz to Chef Tony
ps
used to try to disassemble it, checked the cables - everything is fine (as long as I can see), they are connected nicely, beside that phone work fine, only problem is with the digitizer
Hello...friend, i got the same problem wit my Himalaya last time n guess what it works fine again after i put a small piece of paper between the phone n the battery..but unfortunately the charging port broken..
but i still have Blue Angel wit me wit no GSM problem..
hello guyz!
my samsung galaxy 3 i5801 display got damged recently!so i took my cell to local samsung cervice center! he said that the display screen is not available! so he replaced my damaged screen by a duplicate screen! the problem with this screen is it shows different colours when seen from different angles(basically its a TFT screen i guess)! this really hurts my eyes ! so i am planning buy a new screen where can i get one?
i search them on ebay and i found some!but i could not decide which one to get! all are for i5800 and mine is i5801 ! i guess it dosent really makes any difference! As i am not allowed to post urls please search "Display Screen For Samsung Galaxy 3 i5800" on ebay.com and tell me which one to buy!
Thank you!
How much did you spent on replacement LCD ?
Did samsung guys sold you a duplicate/non-company authorized screen, this would be the strangest thing I heard about any company service center.
I don't think you should be buying it off Ebay without knowing about details of screen and a couple of reviews about it.
I recently saved my Galaxy 3 as it suffered from non-functional touch screen and a broken volume button connector, had to fully dis-assemble and do the stuff to fix it.
ghpk said:
How much did you spent on replacement LCD ?
Did samsung guys sold you a duplicate/non-company authorized screen, this would be the strangest thing I heard about any company service center.
I don't think you should be buying it off Ebay without knowing about details of screen and a couple of reviews about it.
I recently saved my Galaxy 3 as it suffered from non-functional touch screen and a broken volume button connector, had to fully dis-assemble and do the stuff to fix it.
Click to expand...
Click to collapse
i mean to say that screen was a old one! he didnt had galaxy 3 display but a same size another display which was ages old
but i was really desperate at that time so bought it :/
thats why am asking you which display to buy and from where?
hey dude!!!! please help me out....... saw your previous discussion about your faulty touch screen and soft keys which is due to the problem in the digitizer...... me too experiencing the same problem in my i5801..... my lcd screen is fine and clear...... but the touch screen doesnt respond properly to the touch input neither the soft keys..... the problem started when the phone accidently fell in water...... but i had saved the phone by taking out the moisture some how...... from then this problem started...... everything works fine..... except this touch and soft keys...... got to see tat you have managed to repair it.... kindly tell me the solution...... please boss!!!!!:crying:
Raghsin said:
hey dude!!!! please help me out....... saw your previous discussion about your faulty touch screen and soft keys which is due to the problem in the digitizer...... me too experiencing the same problem in my i5801..... my lcd screen is fine and clear...... but the touch screen doesnt respond properly to the touch input neither the soft keys..... the problem started when the phone accidently fell in water...... but i had saved the phone by taking out the moisture some how...... from then this problem started...... everything works fine..... except this touch and soft keys...... got to see tat you have managed to repair it.... kindly tell me the solution...... please boss!!!!!:crying:
Click to expand...
Click to collapse
Hi are you still want to use your Samsung I5801? My phone(I5801) display got damaged. Please let me know. You can email me at "Sanjayforweb (at) gmail (dot) com