Hi guys,
I've been playing around with my SPV M2000 for a few days now (great phone!), but one thing is still puzzling me. Is there anyway for me to mute the ringer when I receive a call?
I know I can just reject it, but that sends people to voicemail instantly, so they know I've rejected it... I just want to be able to mute it, but have it ring on until it automatically hits voicemail (similar to the "Silent" function on the P900/P910).
Anyone know if there's a shortcut that will do this for me, or possibly a 3rd party plugin?
Thanks in advance,
Chris
He he, i wonderdt about that also when i got my BA, and i realised today that you just have to move the sound control slider on the side down, thats it
LOL... I can't believe it was that easy, thank you so much.
Ha ha, me neither.
I also had a P900, so it just diddent occur to me to use the sound slider for this.
No, no way. Either there must be an option on screen, or using simillar as #3 on the P900 :lol:
Man these forums are the best ! In the past 24 hours I've found solutions to at least 3 problems (Smart Dialing, SMSes not being sent, and the silence call) that have been driving me crazy for the past month & couldn't find any clue on in the i-mate forums for my PDA2k. It really shows you how poor the manuals for these things are !
Thanks alot !
Related
Hello fellow Dash/Excalibur users!
So lately I've been getting quite a few annoying prank calls from a blocked number. These actually don't bother me too much except for when its the middle of the night :X So I wanted to create a profile where "unknown" (blocked) numbers wouldn't ring and normal calls with caller ID's would ring. For the life of me I can not figure out how to do this. It appears that on the Dash you can only have ALL calls as silent or ALL calls set to ring thru. Maybe someone knows a good program for this purpose.
Right now I have it set to completely silent when I go to sleep but it would be really nice to figure this out so that other people can still call me if they need to.
Thanks a ton.
PS- I'm running WM6 Beta on a T-Mo Dash if that matters.
eyeoncall.
Thanks! Works great.
Hi,
My first post here, hopefully an easy one.
I really hope i am just being stupid and over looking something simple.
I have an unbranded TP2 and i use a Pay & Go SIM in it.
this has not been a problem, everything works exactly like it should. my issue is that O2 insist on sending me notification messages after every text and call.
This wasn't a problem on any other phone as notifications came in a silent, or discreet message just telling the the amount of credit i have left. Now, on the TP2 it is a very loud and intrusive noise that echos around my next to silent office. i cannot find out how to change the tone to something a little less annoying.
I dont mind if i can only use the TP2 istalled tones, i can find something suitable. But i just don't want to turn off ALL of my notifications, just their tone
Thanks for any help
TM411
Start->Settings->Sounds and Notifications
thanks for the speedy reply.
I did look there.
I can turn off notifications/ event etc, or i can change tones to most kinds of notifications, EXCEPT for the "phone" notification.
I have checked through each of the availiable settings to change to see if that makes a difference, and i still cannot find it
Thanks
TM411
Seem to have a bizzare issue, my ringtone sound which is set on max is still quiet and there is no way i would hear it if i was outside, does anyone else have this issue?
Yes! Please search the forum you will get some topics about this exact issue
Yes I've missed 2 calls today because of that... it was in my pocket. (vibration was off though)
The good thing is you don't keep it in your pocket too much, 'couse it's an awesome phone...
zonkkk said:
Yes I've missed 2 calls today because of that... it was in my pocket. (vibration was off though)
The good thing is you don't keep it in your pocket too much, 'couse it's an awesome phone...
Click to expand...
Click to collapse
"Awesome phone".... and u missed 2 calls because u couldnt hear it....
I have it on order but i must say this loudspeaker issue start to worrie me ...
it seems that T-Mobile versions have some volume issues , ... there is some thread concerning that, ...many say that the generic phones volume is just fine ... people who reported that their volume is low here yours is T-Mobile right? not generic ROM?
malmosyd said:
"Awesome phone".... and u missed 2 calls because u couldnt hear it....
I have it on order but i must say this loudspeaker issue start to worrie me ...
Click to expand...
Click to collapse
The reason I am not worried is because I was out that day with lots of people around and there was lots of noise and vibration off. This happened to me often with my Nokia 6500 slide and my other phones as well. So that's why I am not worried.
Volume seems fine with me - if in a loud place then obviously you'll struggle to hear it in your pocket but that's when vibrate comes into play. SMS tone woke me up this morning so does the job for me
Gotta agree, im on t-mobile and mine seems really loud. So much so I had to change the default text to something quieter as i found it too loud. lol
I am on neither so going to send it back and get a replacement as i have two HTC Desire both configured the same, same software/firmware and i have tried both factory reset. All other functions seem to work fine on it.
The title says it all. My i780 does not give any kind of sound notification when the call ends for some reason (bad reception, opposite end hangs up etc). All the phones I owned till now have this feature. Many times I realize after minutes that I am talking to myself. I must ask the other end for confirmation every now and then when I have to say a lot or regularly check my screen.
Is this only happening to me? I have tried 4-5 cooked WM 6.5 roms from this forum since October 2009 when I got this phone. The same issue with all of them. Today I also updated my phone part. Still got the problem.
Is this a known issue? Is there a solution?
Thank for your help!
Its been 10 days!
No one else has this issue?
babylonx said:
Its been 10 days!
No one else has this issue?
Click to expand...
Click to collapse
This is no issue, just no sound binded for it.
Its ok,in WM almost all sounds,also like busy tone, incoming call, end of call , etc... are binded via registry. If its not binded, youl hear no sound =)
heineken78 said:
This is no issue, just no sound binded for it.
Its ok,in WM almost all sounds,also like busy tone, incoming call, end of call , etc... are binded via registry. If its not binded, youl hear no sound =)
Click to expand...
Click to collapse
I still have the same issue...even after regedits to bind appropriate sounds to CallDrop and NetworkDrop. No sound!
Hi,
I am a new member here and I currently own a HTC Touch Diamond.
I am planning on buying a new phone only months after buying this one mainly because of two issues:
- When someone calls me, the phone only starts ringing after a few rings on the caller's side. I have missed many calls simply because of the delayed ring so by the time it does ring, the caller has hung up. Weirdly enough there is no delay in the phone lighting up and notifying the user of an incoming call, it's just the ringing that is delayed, so obviously it can detect the incoming call accurately and it is just a firmware issue. Originally it would be delayed by about 5 rings, but after a few modifications I've done from some websites, I've managed to reduce it to about a 2-3 ring delay. Either case the delay itself is unacceptable.
- The ring-tone volume is ridiculously low. I have tried all methods available such as manually adjusting the volume through registry hacks, using an application called Diamond Tweak, etc, but it simply is not loud enough.
I was wondering if anyone has experienced these issues before and if there is a fix for them now. I did a lot of research into fixing this in the past few months and to no avail. I have now given up but given that this forum is so active, I figured I might ask for help here incase there is a solution that has eluded me. By the way HTC customer support is useless. They fail to even recognize the problem and almost always conclude with a response along the lines of "we've forwarded you issue to the technical team and will get back to you if a solution is found." I am almost certain that will never happen and I am extremely doubtful that they've even bothered to forward anything to anyone.
I was hoping as a last resort that this problem could be solved by replacing the Windows Mobile OS with Google Android OS, but it appears Android OS is still not fully compatible with the Touch Diamond.
Anyway, any help with this would be very much appreciated. Thanks!
Yeah, this is certainly a problem on stock diamonds. It's primarily caused by the speed at which the phone can access and render the phonecanvas, as well as the playing of a MP3 ringtone.
The low-hanging fruit is to use a [.wav] ringtone which is played natively in WM6. Also, if you're willing to flash a custom ROM, there are several that use optimized dialers (I made one) with better responsiveness. If you search, you'll come across a few:
GenY D2X
GenY D2The incoming call latency used to annoy me, it's why I initially signed up to xda, but it's something I haven't even noticed in quite awhile. I'll attach a [.wav] ringtone for you to try out.