Hi Everybody,
I have an xda11 and have upgraded everything BUT i just cant get the bluetooth running properly all the time. could someone suggest something other than the obvious. I really screwed up my phone with bluetooth tools and their must still be something in the registry that is affecting my bluetooth. I have a hello2 headset which is fantastic. The problems really started with bluetooth tools. I have done several restores from my card but i think the problem is in the registry............anyways i love gadgets and you guys are the bomb.
ROM VERSION 2.06.00WWE
ROM DATE 06/14/04
Radio Version 1.18.00
protocol 1337.38
extrom version Sin.Merged v2.0
Hiya
Can you provide a few more details? Eg..
What OS?
Have you done a hard reset to refresh the device and still having BT issues?
What version of BT Tools did you install?
What exactly the issue with BT is: it stays on for a minute and then turns off / doesn't come on at all / any error messages?
Cheers
Ant
Thanks for responding
The operating system is
WM2003 second edition
version 4.21.1088 build 14132
Done a hard reset
The version of BT Tools was 1.1 (i think) but i did remove it.
and yes it stays on for a minute or it doesnt answer but it knows its on.
I just think ive screwed something up in the Reg. I have spb 2.5 , and a heap of programmes on it.
When doing a restore from my storage card - do i have to restore registry otherwise it would leave the "working" bluetooth after a hard reset.
I dont get any error messages-it just has a mind of its own. Also i cant answer another call while im on a call.
Sorry to be a pain..........if there is a BT stack i can download to overide this one-that wuld be cool or can someone tell me what dll's to delete so it fixes itself up????
Thanks again for your quick reply
Thanks for responding
The operating system is
WM2003 second edition
version 4.21.1088 build 14132
Done a hard reset
The version of BT Tools was 1.1 (i think) but i did remove it.
and yes it stays on for a minute or it doesnt answer but it knows its on.
I just think ive screwed something up in the Reg. I have spb 2.5 , and a heap of programmes on it.
When doing a restore from my storage card - do i have to restore registry otherwise it would leave the "working" bluetooth after a hard reset.
I dont get any error messages-it just has a mind of its own. Also i cant answer another call while im on a call.
Sorry to be a pain..........if there is a BT stack i can download to overide this one-that wuld be cool or can someone tell me what dll's to delete so it fixes itself up????
Thanks again for your quick reply
Hi all,
I have a strange problem: bluetooth manager works fine after a soft reset. I can my PPC the whole day and it will always start normally (read: the screen that shows BT shortcuts shows up). The problem occurs when I turn off the phone over night (flight mode). The next day I can't get the BT manager to show the shortcuts screen - BT can be switched on and off but neither the BT manager or the BT settings screen will show up (there is no error message!!!). After I do a soft reset everything starts working...
Has anyone come across this kind of a problem in the past? I couldn't find anything using search on this forum...
My device info is (DutchRetail ROM):
ROM: 1.40.00 WWE
Radio: 1.13.00
Ext ROM: 1.40.556 WWE
I have tried uninstalling almost all extra software that I have installed after a hard reset but the issue is still here.
Thanks for all suggestions on what else I can try.
Hi Poga,
Yep, I get exactly the same problem :-(
AndrewB
ROM (i-Mate) 1.40.00 WWE
Radio 1.12.00
ExtROM 1.40.176
Hi Poga,
Yep, I get exactly the same problem :-(
AndrewB
ROM (i-Mate) 1.40.00 WWE
Radio 1.12.00
ExtROM 1.40.176
Do either of you have Goodlink software on your device?
same problem no goodlink
Same problem but no goodlink software
I also get another funny problem where sometimes I go to connect to my bluetooth access point from my phone and it just has the little pie icon saying it's doing something, then it stops and it hasn't connected (the connection icon stays the same) and I can't make any sort of connection. It then does this everytime I try to connect.
I don't know how i fix it, but I combination of many soft resets various flight mode turn ons and fiddling it eventually works. It's very frustrating and it's happened on every software version. Right now i"m running 2.04.00. I have a CDMA from Telecom NZ running radio HA_01_151 right now (but I've tried other radios).
Somebody else had this problem I noticed but nobody replied to his posts.
I've got the same problem I hope someday that someone makes a fix for it. I run the XDA IIs BlueAngel 1.40.00 Asian O2 ROM WWE. =/.
Same problem here - only solution I had was to go into settings/memory and then stop all programs running - then the bluetooth manager appears without the need for a softboot..
Pain in the arse. :!:
poga said:
Hi all,
I have a strange problem: bluetooth manager works fine after a soft reset. I can my PPC the whole day and it will always start normally (read: the screen that shows BT shortcuts shows up). The problem occurs when I turn off the phone over night (flight mode). The next day I can't get the BT manager to show the shortcuts screen - BT can be switched on and off but neither the BT manager or the BT settings screen will show up (there is no error message!!!). After I do a soft reset everything starts working...
Has anyone come across this kind of a problem in the past? I couldn't find anything using search on this forum...
My device info is (DutchRetail ROM):
ROM: 1.40.00 WWE
Radio: 1.13.00
Ext ROM: 1.40.556 WWE
I have tried uninstalling almost all extra software that I have installed after a hard reset but the issue is still here.
Thanks for all suggestions on what else I can try.
Click to expand...
Click to collapse
cw6447 said:
Do either of you have Goodlink software on your device?
Click to expand...
Click to collapse
I do and I have the same problem. I've been suspecting that it may have something to do with that because when I reset and I can start the manager just fine before I start Goodlink, but after I start goodlink it's a pain. Once, I tried to start BT manager then it didnt... i forgot all about it then suddenly some 11 hours later it just popped up by itself. Goodlink had been running continuously.
Any ideas???
I sometimes have the same effect.
What I usually do to resolve it (without soft reset):
- I installed PocketNav (kills programs which run in the background)
- I select 'Close all but Ative' in PocketNav
Then the Bluetooth Manager works again.
Hope it helps.
A
This is due to memory limitation in WM2003SE. When it finds that the memory is not sufficient it wont run Bluetooth Manager or Wifi. I had this problem a lot until i have shifted to WM5 which has more than 100 mb when the device starts. I guess that is why M$ has built WM5 for that reason and also for persisten storage of course.
The "memory limitation" is indirectly the problem. The Goodlink, which is more than three times the memory hog as any other 3rd party app out there, is the direct problem. I could write a college discertation on the amount of bugs in this awful software. And yes, it is good for push email...but at the expense of everything else that is good about these multimedia devices we own. The typical "close-when-you-tap-the-X" software utilities don't shut down Goodlink on my device even though they successfully shut down every other software I own (over 40 titles). So I have to use MemMaid to kill its process. But Goodlink will restore itself in a matter of minutes as it ventures out to the server looking to synch mail, calendar, contacts. If there was ever a reason to bring back public hangings, it would be for the Goodlink windows OS development team.
I don't really see any issues with Goodlink eating my memory. Then again, I've converted from a strictly fun user to a strictly business user so the whole gaming and multimedia thing doesn't quite do it for me anymore.
Steiner,
I tried PocketNav to see if it would truly close GoodApp.exe. Although it does seem to shut the application down, the 6+MB exe still is open in memory. Using MemMaid it shows that it never really closes.
I also didn't have the Goodlink software installed . My solution to the problem was: I installed the Sprite Backup software and set it to automatically restart my PPC @ 6 am after creating a backup. So in a way, this problem was very benifical to me - I now have a fresh backup of all the software every morning and the device reboots every morning without my intervention (no BT errors, no WiFi errors, etc).
poga said:
I also didn't have the Goodlink software installed . My solution to the problem was: I installed the Sprite Backup software and set it to automatically restart my PPC @ 6 am after creating a backup. So in a way, this problem was very benifical to me - I now have a fresh backup of all the software every morning and the device reboots every morning without my intervention (no BT errors, no WiFi errors, etc).
Click to expand...
Click to collapse
Good idea!!! :lol:
Hi, I'm a new user of Jasjar. It is also my first Windows Mobile device.
I have two questions:
1) Why my JasJar is so slow? I mean I made an Hard reset this morning, but nothing change. I think that a device like that can't need 20 second for turn the screen on, and another 8/9 seconds for change from Landscape mode to vertical mode.
I have installed only the resco today plug in and the resco registry, for tchange the layout of the qwertz keyboard.
2) Any news for the italian rom upgrade? I see that in the ftp section there is a file named ROMITA-TIM. how to instal it? is safe to instal it?
Many Thanks
9090 Rom 1.40.00 WWE ExtRom 1.40.150 radio 1.13.00.
I had an accidental Hard reset when i had meant only to do a soft reset.
I had the 9090 working perfectly for years and have lost the programs that I updated it with.
I have found LED Off and GB-SOFT tweak for the GPRS but have lost all the others including the Contacts Button from my phone pad.
Can someone send me in the right direction for the cab file to replace the contact button and a link to any other software we used in the old days.
Also I still remove the BT file unless using TomTom with a BT GPS so I dont get the "Dont hear the other side" prob when using it as a phone.
Was this ever fixed?
Thanks for the help
Steve
Found it, it's called Mamaich Telephone Extension and it adds a Contact button to the blank button on the phone keypad.
Only prob is it wont install because it says I have an unregistered version of NaturalInstaller. File is called SetupFL.exe .
Any idea's? Mamaich website wont load.
Prob solved
Managed to unpack the CprogHook.WM2003_2577.CAB file from the installer packaging and now have my Contacts button back on the phone pad.
CprogHook.WM2003_2577.CAB
Hi,
could u email me the CprogHook.WM2003_2577.CAB ?
[email protected]
thks a lot
I have a hateful problem, when i power on my hermes, and try to synchronize to Windows Live, the phone hungs, the same to sending sms, showing the screen of the lastest aplication that i use, and freezing the screen, foring to reset, i have triying flashing with diferents versions of roms, and the problem persist in each instalation, also flash my radio with diferents version but i dont have resolve the problem, try to fix bad blocks, but nothing bad, my spl es 2.10 olipro, any help is welcome ...
I'm having almost the same problem on my Cingular 8525. I can connect to a WPA/TKIP-secured WiFi network. IE is able to open Web pages over a wireless connection. However - after approx. 10 minutes tops, the PDA hangs, the backlight goes off and the PDA only responds to soft reset.
I've tried the WiFi driver patch mentioned in the FAQ, and it almost bricked my WiFi and Bluetooth. Thanks God SKTools have an option of restoring replaced system files from ROM - I did such a rollback for the driver files and now my PDA is at least back to its original state.
My configuration is:
OS ROM - wm6.premium.v2, dated 4/17/07, OS Version 5.2.1236 (Build 17741.0.2.1)
AKU 0.2.1
Radio: 1.41.00.10
Protocol: 3274.7020.18H
I'm on the verge of reflashing the device with the original WM6 ROM from ATT, but would prefer to avoid the flashing if possible, as I am an absolute beginner to this.