I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
I am looking a for a upgraded version if anyone can help... it would be great if there was a wa to get rid of the o2 custom stuff on the xda too i dont like that too much can anyone help
Acid
At the moment there are no updates for the XDA2i but there is rumours of one in the pipelines... if its true or not remains to be seen but we can only hope.
As for removing the customised crap just do a hard reset (you'll loose all your stuff) , press power + reset.
Then when its installing a box will appear asking "Personal" or "Corporate" user, choose the corporate option and enter the password "0506"
hi
at the moment the only newer rom from our factory rom is that of pda2k.. do a search for my posts and in there you will see where to get it and how to get past the country id error..
Danny-B- I didnt see the box will appear asking "Personal" or "Corporate" user it just says will customize my xda in 3 seconds and i cant do anything to stop it and i cant even uninstall the software it is linked into everything.. its really annoying and this o2 thing is just eating up memory and space... can you help
Acideax
I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
Are you sure you didnt miss it ?
Im sure it auto installs personal user if not selected within a certain time.
The best thing to do would be, Hard reset it, then just sit and watch it install till it gets to the choice point.
Another thing that might be slowing your device down can be the SD card if its over 512Mb , the XDA 2i sems to have a slight problem with them and slows everything down, well it does in my case anyway.
rom
my xda2 i spec.
rom version-1.11.00 wwe
rom date-01/27/05
radio -1.00.00
protocol-1337.39
ext rom version-1.11.923 wwe
XDA2i & WM2005 ?!?
HI !
I´m using the XDA2i / O2-Germany with WM2003SE..
ROM 1.11.01GER
Ratio 1.03.00
Protokoll 1337.42
ExtROM 1.11.132GER
I´ve tried to upgrade to WM5 but...
HimaUpgradeUt.exe 1.2.0.0
nk.nbf 1.50f
WM 2003 ROM Image Editor 1.4.26
the firste tries I´ve got ERROR: wrong device, so I changed the devicetype from PH10 to PH10C like written on start-settings-deviceinformations...
I´ve tried again...
I started HimaUpgradeUt.exe and after a few sec. the screen say´s "deviceinformations: XXX
XXX
ROM XXX
Image info´s XXX
.....
if I press UPGRADE the massage "don´t remove USB & power" appiers then a new screen with the status for the upgradeprocess....
BUT... after 20 sec. I always get ERROR 101 (connectionerror).
- any idea ?
The XDA2i does not support the leaked WM2005 it only works on the XDA 2
Although the devices look the same the internal hardware is different.
The XDA2i does not support the leaked WM2005
sad to hear that...
ok, thank you but do you know if it´s possible to get an upgrade in the future ?
do you know where the problem is? (Image ore Updatesoftware?)
???!!!
The problem is that the software (wm2005) has to be custom made to suit the hardware in the phone so ... HTC - the makers of the phone or O2 would have to "build" the software for the phone.
Its because all the correct drivers and such have to be correct for the device to function.
But you never know, it might be a possible upgrade in the future, youll just have to wait and see.
Upgrade for XDA2i
Ok, I´ve found an original Upgrade-Tool & the Rom-files from o2UK....
My next Problem is the Password to edit the nk.nbf to chage the Image...
I´m using WM 2003 ROM Image Editor 1.4.26
Xda IIi ROM v 1.10.124 (43.6MB) - english
AlUpgradeUt.exe 2.0.0.1
when I start the upgrade I always get the
"ERROR 120: COUNTRY ID ERROR".... that´s because I have the
o2 - Germany device...
Can somebody help me to findout the right password for the Rom-editor ?
[/b]
I have the sx66 (the box says country of origin says Taiwan)
Rom : 1.40.00 wwe
Rom date 3/10/05
Radio: 1.13
Protocol: 1337.35
extRom: 1.40.125
Bt model : sony Erickson hbh300
1. I can get paired using the hands free/setup but not the high quality
2. also when updated ext rom it seemed likes it worked but 5-7 TIMES A FILE SAID..."NOT ENOUGH DISK SPACE ERROR ERROR" POPED UP (IN THE MOBILE DEVICE/EXTENDED_rOM FOLDER when I copied to this folder it said the above)?? do I need to re-do this? HOW TO GET IT ALL INSTALLED?
3 Any other upgrades do you see I need??
Hello.
Can you please explain exactly what you were attempting to do with your phone? In order to help, we'll need you to be detailed in your description.
-Robert
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
I understand that you hadn't to hard reset the jasjar after upgrade it with this radio. Please confirm and if is any tricks to apply.
As you can see below, I have radio 1.04.10 installed. Anybody know the differences between these 2 loads?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
No tricks, no hard reset, just a normal radio upgrade...
Hello
Has anybody tryed this on the Xda Exec?
Regards
Gigino
ncruz said:
No tricks, no hard reset, just a normal radio upgrade...
Click to expand...
Click to collapse
I don't know what pocedure you guys use, because to me happens allways the same... have to hard reset it, upload the original ROM and following it upgrade to the latest radio...
Can somebody explain the complete procedure without having to hard reset it?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Where did this version of radio rom come from? Can anybody who has done the upgrade comment on the version? anything better or worse?
gigino said:
...
Has anybody tryed this on the Xda Exec?...
Click to expand...
Click to collapse
I've been using radio: 1.06.00 since Tuesday or Wednesday without problems. Hasn't fixed nor broken anything as far as I can see.
Radio 1.06.00 was issued as part of the recent German MDA update.
[No message]
Yes, ist working, had to do the update several times, like 10x, before it was installed, soft reset ......and.....IT'S ALIVE
thanks
Thanks, ncruz! the radio upgrade on my MDA Pro worked flawlessly on the first attempt. My device information now shows:
ROM version: 1.13.69 WWE
ROM date: 10/12/05
Radio version: 1.06.00
Protocol version: 42.37.P8
ExtROM version: 1.13.162 WWE
I was hoping the radio would solve a couple of issues I've mentioned on this thread:
http://forum.xda-developers.com/viewtopic.php?t=38876
but, unfortunately the wireless manager and bluetooth issues still persist.
Hi,
Removed SD and SIM cards.
However, as with my all Universal previous ROM upgrades (only Radio till now), I got several errors (114; 150;...) till succed. About 15 and long attempts.
Did you experience a similar problem?
Could it be related with device bootloader version (mine is v1.00). Does someone has a newer one?
Between some attempts and errors, I need to 'soft reset' or 'cold boot' in order to get a different error, and finally a succesfull attempt.
I've a Qtek 9000 with a TMN SIM (Portugal) and it works fine after upgrade.
Just in case, I want to give up in future similar operations, does someone knows how to get rid of the bootloader? Does an Hard Reset resolves? Is there any other way?
Error 114: Radio ROM update error
Error 150: ROM upgrade utility error
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Tuningszocske said:
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Click to expand...
Click to collapse
I've noticed 2 times now (with hard resets between) that sometimes when I receive a call, my Contacts open and I can't close them. I can click the Start menu and run another app but then Contacts is brought to the front again. After enough clicking to close Contacts, the upper right corner quickly alternates between "OK" and "X" and I end up having to soft reset.
One thing that I did do differently is that I performed a soft reset prior to O2's extRom installation. Are there any 'fixes' in their extRom that I might need to manually install?
I'm thinking about going back down to 1.04.00 as I didn't have this problem prior. But I'd rather not downgrade.
I'm down?grading to 1.04.10 now....
Re: Radio 1.06.00 Upgrade - borged
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Re: Radio 1.06.00 Upgrade - borged
eappel said:
....I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
Eric
Click to expand...
Click to collapse
It's looking for a serial (not available on Universal) or USB connection, so you'll need to connect to "ActiveStink" via USB cable. The "Serial" will normally change to "USB" when you plug USB in.
Unfortunately, I've never tried it with an *un-partnered* device stuck in bootloader mode - hopefully somebody else has.
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Can u let me know whether i can upgrade on dopod 900 in singapore or this upgrade is restrict to a particular country.
cheers Taurus
can be used for Dopod 900 also...
the radio update is for all models of HTC universals...
Re: Radio 1.06.00 Upgrade - borged
eappel said:
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Click to expand...
Click to collapse
You have to instal complte original ROM, the one that came with the phone,
just conect the phone with usb, start upgrading your phone, and wait for 20 minuts to be done
thats how I manage to fix mine 8)
I Removed the Radio 1.06.00!
I had a lot of problems with Messagin. I losed all my internet account/Configuration, my SMS ....
It was a problem with the Radio 1.06.00"
I am currently trying to upgrade my Rom from the standard O2 version to the XDA-DEV Special Edition.
I have done this many times before on other XDA 2i's however this one doesn't seem to like communicating. Activesync with syncronise all folders and connect quite happily however when i try to run the Special edition Rom setup MS-DOS box appears verify version and reports unknown internal error. then when the setup software starts it verifies your system requirments, you select next and then it reports the following in a GUI Box.
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is connected properly.
To try and get arount this i have put the XDA in Bootloader mode and then run setup but still comes back with the same error.
Any help or ideas would be appreciated
ROM Version 1.11.00 WWE
ROM Date 01/27/05
RADIO Version 1.00.00
PROTOCOL Version 1337.39
ExtROM Version 1.11.171 WWE
XDA-DEV Special Edition is a rather old rom only! for wallaby devices
Thats weird as i have had it running on a himalaya in the past. Is there a ready made upgrade rom for an XDA IIi available. Bored with the O2 one, to many restrictions.
then you are the first i ever heard about who have portet a rom from 1 pda device to another
Thaks for that, I have found one of PUGS with the O2 stuff stripped out.
See how it goes with that one.
Many Thanks
Hi,
i was using xda2s, with WM5 (old-build) and several months ago, unaware follow this link:
http://forum.xda-developers.com/showthread.php?t=274505
(I think this is the point the problem occur).
somehow, i have managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
Radio: 1.12.00
ExtRom: 1.40.923).
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error: (see attachment)
Error 100: Model ID Error 25-N-10-N-N
then trying to run with MaUpgrade, it seem work, but no upgrade at all.
(see attachment).
Desperately seeking the solution..
Need help.
Thank you very much.