Bluetooth on Qtek 9090 - MDA III, XDA III, PDA2k, 9090 General

I just bought a Qtek 9090 with Windows Mobile 2003SE. I then bought a Nokia Bluetooth headset HDW-3. they say it's meant to go upto a distance of 10 meters. I find the reception very poor even when the phone is on my belt strap on left side and the headset in my right ear! Does anybody have any experience with those devices? Is it my Qtek or is it the Nokia headset which has poor bluetooth reception?

There is a patch available, do a search on the forum.

After having installed the patch and soft reset it froze the today screen! I had to make a complete restore.

Bluetooth headsets and QTEK 9090
Yes - I tried with the BT headsets JABRA BT800 and Ericsson HBH-660 and the updated BT on the QTEK9090. Poor sound quality, no caller ID on the headsets and to press more than two or three times to make connection.
I believe in a very bad BT of the QTEK 9090 because both mentioned headsets work fine on other devices

Related

Orange M2000 - Jabra Bluetooth headset VERY crackly

Hello,
I have just upgraded from an XDAII to an Orange SPV M2000.
First impressions are generally quite good. One huge problem I am having though is that my Jabra 250 BT headset that works absolutely fine on my XDAII, works terribly on the M2000. The connection is incredibly crackly to the point of it being unusable.
The same headset works fine again when I revert it back to the XDAII. I have even tried turning off encryption on the M2000.
Is it possible that because the bluetooth software on the M2000 is completely different to that on the O2 XDAII, that this could be part of the problem?
Grateful for any advice.
Thanks!
Howdy,
I have the same probs with Jabra 250 and MDA III @ 1.6.1, Broadcom Build 1900.
up to 40 centimeters, everything is ok with a free line of sight :shock:
it still works up to some meters, but is indeed unusable. :evil:
bought it at MediaMarkt, so they'll get it back.
D'you think it's a headset problem or a general problem with the bluetooth on the phone.
I find that Activesync over bluetooth does not work at anywhere near the same range I was getting with my XDAII
Can you let me know if you have better luck with any other headset.
Incidentally, I note with the Jabra that when it is connected, you can click and hold down on the Jabra paired device and bring up the status which shows connection strength. It fluctuates greatly between the weakest and the "Just Right" marks - which might explain why it so crackly.
MY BT Headset experience
I have been trying out some BT Headsets for my MDA III T-mobile Austrian edition and here are the results:
Jabra BT 250: The connection was cracking the whole time even when the phone was next to the headset. It is really comfortable when using it. VERDICT: Not usable.
Ericsson HBH 35: No cracking, great sound quality but would stop working after few minutes of inactivity. Turning BT on the MDA off and then on would make it work again. VERDICT: Usable but the inactivity thing really bugs me
Motorola HS-820: The same problems as HBH35 although the sound quality was somehow inferior to HBH35. VERDICT: same as HBH35.
Motorola HS-810: Works well, less disconnection problems than HBH35/HS-820 but still unpredictible/unreliable. The sound was barely hearable in noisy envoironments due to the desing of the headset. VERDICT: only headset that works more or less OK with the MDA III's current BT Stack. But only usable in the car or in a somewhat quiet environment.
Overall, wait for the BT fix. I've returned all the headsets until I can use one without problems.
Thanks for your reply.
Is the BT fix going to be unique to the service provider or will it be a Broadcom generic fix?
For example, I have the Orange SPV M2000 - would I be able to use whatever fix comes out for the MDA III or do I need to wait for Orange UK to release a fix specifically for their flavour of Blueangel.
Thanks!
I've been living with this cracking sound from the Jabra (paired to my XDA2) for almost a year now!

Bluetooth Headset - Bad Sound Quality

Hello,
how can I improve the sound quality of my bluetooth headset?
I've tried several headsets of different manufacturers
(I work at a mobile phones distributor so I had some to choose )
and with also different phones.
Nokia, Siemens, Motorola... almost every phone worked well with almost every headset.
But with my MDA-III it's a nightmare
Every headset I've tried has noise and clicking sounds and only works acceptable within about 50cm
I' also updated my Bluetooth Stack to 3900 but it didn't helped.
It there any way to get my Headset (Jabra BT250v) to work?
Thanks in advance,
Dino
hmmm - have to admit I've been attempting to use an I-tech headset (the cheapest one with the "tie-clip" mic and a wired earpiece) and I thought the poor reception (but only with certain phone calls oddly) was the headset being cheap tat - not the phone!
Every headset I've tried has noise and clicking sounds and only works acceptable within about 50cm Sad
I' also updated my Bluetooth Stack to 3900 but it didn't helped.
Click to expand...
Click to collapse
I too run .3900 and radio 1.08 I always had the *VERY SAME* trouble that you describe here..
I tried Ericsson 600 and 660 heatdsets, and I bought an EpoX HS02-BT it works for well over 10 meters with any Nokia or Ericsson phone I tested, It even works 10 meters with "QTEK S100" - but my 9090 sucks in this area.
I wonder if my (and yours) 9090 is somehow defect.
ipzipzap said:
But with my MDA-III it's a nightmare
Every headset I've tried has noise and clicking sounds and only works acceptable within about 50cm
I' also updated my Bluetooth Stack to 3900 but it didn't helped.
It there any way to get my Headset (Jabra BT250v) to work?
Click to expand...
Click to collapse
Unfortunely I have the same problem , and I really need Headset for working .
I tried Radio 10 and 3900 stack with some slight improvements then I tried The Jabra 250V with a SonyEriccson of a friend of mine .... everything was perfect sound , 10 meters away , automatic answering and so on .. I guess is an other OS ,
the posts around here state the BT stack from MS is faulty , just wondering if other Smartphone with WM have the some problem
I'm just waiting for a piece of sw that takes all us out of this incredible fiasco !

Which bluetooth headset do you use?

I don't know which headset I should use with my MDA Pro.
I'm a Plantronics fan, but Jabra also makes good Headsets. What do you think about the new Jabra with LCDisplay? It would be a good complement to use the closed Universal.
Did anybody use this new Jabra?
What model Jabra? the BT800? That one has the number display for called ID. It's good. I did not think i'd get use to it, I prefer the older bt250 style, but it's not bad at all and supports voice dialing.
i got the jabra's BT800 and SE Akono HBH660.. i think i like the bt800 better
@ GM: Is the display a big helper? Does it only show the number, or ist it possible to see the name either?
I am using the Motorola HS850 and it seems to work very well with JasJar.
MBastian said:
I don't know which headset I should use with my MDA Pro.
I'm a Plantronics fan, but Jabra also makes good Headsets. What do you think about the new Jabra with LCDisplay? It would be a good complement to use the closed Universal.
Did anybody use this new Jabra?
Click to expand...
Click to collapse
Plantronics hasn't really released any new BT headsets. I'm still using my old M3000 with the MDA II. Try out Jabra since they seem to be the market leader for BT headsets.
bluetooth ...
i've used several BT headsets and the best ones i've used are from SonyEricsson ... I currently use both HBH-300 and HBH-608 and they both work fine on my XDA 2s ... the only thing i've noticed (comparing my XDA 2s with my SE P910i) that the bluetooth isn't as strong compared when i use them on my SE Phone... in comparison with other headsets, i think Jabra has been a good competitor as well as nokia ... i also have the O2 BT headset which is nice and small but the signal is really poor ...
C
I currently use an SE Akono HBH-300 and had an HBH-65 - they both work fine with my XdaII, though the 65 had crap battery life.
I am using the Oakley Razrwire glasses with my Jasjar 95% of time... Bluespoon AX 5% of time. BT has worked flawlessly on my Universal. I haven't had it drop connection not once.
MBastian said:
@ GM: Is the display a big helper? Does it only show the number, or ist it possible to see the name either?
Click to expand...
Click to collapse
number only
It's a shame that the JASJAR only sends the caller number to the headset and not the contact name.
I've tried my BT800 on my SE P910i and it displays the contact name when used on that device.
@ Triband81: Plantronics released a whole bunch of new interesting Headsets:
Voyager 510, with extended system für "normal" wired phones
Discovery 320
Discovery 640, only 9g, interesting charging solution
http://reviews.cnet.com/Plantronics_Discovery_640_Bluetooth_headset/4505-5_7-31515626-2.html?tag=top
I ordered mine yesterday.
The Jabra BT800 sounds very interesting because of the display. But it lokks very large on the photos.
i think the bt800 needs the handsfree profile instead of the headset profile w/c jasjar has to display the actual contact name (if you check out jabra's website, almost all ppcpe's are not compatible with bt800). its either jabra released a new firmware for the bt800 or we'll wait for a ROM upgrade for jasjar
rilot said:
It's a shame that the JASJAR only sends the caller number to the headset and not the contact name.
I've tried my BT800 on my SE P910i and it displays the contact name when used on that device.
Click to expand...
Click to collapse
I have been using the plantronics v510, and it works very well with the JasJar. This is the only headset that I used when I first turned it on, I had to turn it down a couple notches just because it was too loud. Great headset, I wanted the 640, but couldnt wait for it to be released.
Anyone does know how to redial via bluetooth headset (HBH 660)?
@ guido: Try a "doubleclick" at the main headset button.
Thinking of getting the bluespoon 5g, I have no use for it right now with IIs, Mini and car phone... But after getting the Exec, BT is a must I guess and 5g seems to go well with it ;P
My headset- HBH Sony ericsson 662. Can see phone Number, can use voidial and listen music via bluetooth with Jasjar
:wink:
question:
can someone tell me if on the Jabra BT800 i can see the display while i'm wearing it ?
thanks
decebal said:
question:
can someone tell me if on the Jabra BT800 i can see the display while i'm wearing it ?
thanks
Click to expand...
Click to collapse
Only if you have an eye in the side of your head! Sorry .... you can only read it before you put it on.
Kevin

what bluetooth headset to buy for pda2k?

pls i got jabraBT800 to use with i mate pda2k but it usually disconnects in sleep mood,is this problem related to imate or to the headset? and what headset is good with my pda2k?
I use a Plantronics Discovery 640 headset which seems OK.
Every headset I've tried seems a bit crackly (that's down to the BA I think) but the Plantronics certainly keeps the link up and it very comfortable to use. The kit has a whole range of charging options too, including an AAA cell charger.

compatible BT headset with S200 Qtek

could anyone tell me wich is a compatible headset with S200 Qtek?
http://www.plaisio.gr/productlist.aspx?catalog=22&category=69978020
i tested i.tech and Motorola H680 and both of them , when i make a call, my voice is transferd ok... BUT i cannot hear anything..
Please help!!
compatible BT audio headset
I have bought and tested on S200 two headsets (with audio-listen to mp3 or radio/with autoswitch audio and telephone calls vice versa):
Sony Ericsson HBH-DS200 you can plugin your own 3.5mm earphones
Sony Ericsson HBH-DS970 fixed earphones with replacable earbuds
Plantronics Pulsar 260 with replacable earbuds
Worked realy fine until now.
What works
I have tried about 10 different Jabra headsets, they all work, so go for them!
But I like my jabra I think it was 250 or 250v, it is really better than a lot of the new ones ofcourse, I bought mine new..
I use Sony DR-BT21G stereo headphone and can happily confirm they work well in both cases. The only issue with them is they occasionally cut out if your moving around/jogging etc, but thats bluetooth for you They work well when stationary.
If you need a A2DP toggle/switch rather than doing lots of clicks to connect them check out my polaris post below, the switch works well on my prophet
http://forum.xda-developers.com/showthread.php?t=422320

Categories

Resources