Related
I have had an XDA IIs for a week and the thing is *riddled* with bugs. A few that come to mind:
Add a new profile to connection manager and then add a 'modem' to that connection. Go and fiddle elsewhere for a while. Often when you come back to change the settings for that connection the 'modem' has dissapeared. (its still there, a soft reset will cause it to re-appear).
Take the unit out of range of your wifi while running an app that does nots of network activity, and you will have to do a soft reset in order to restore network connectivity. This occurs mainly with skype
WiFi Reception is **attrocious** my laptop will tell me that I have a full signal and the XDA IIs will barely register when at the same location. Even holding the damned thing 1 ft from the base station does not cause the signal indicator to head to maximum.
When you use bluetooth, for network access, all the stuff in connection manager gets reset.
Often, after setting connection manager to always use certain profiles, and then encountering a problem, you head into connection manager and find that your selections never stuck
VPN connections do not always stick when set, they dissapear from the menu.
I have tried for ages and failed to make a VPN connection over anything GPRS, WiFi etc. VPN was one of the reasons that I bought the device (access to home and work networks), but it just does not work. Additionally, the instructions with the unit offer no help about how to get it working.
The bundled O2 active stuff is very flaky. Take the end programs applet - it often crashes its self while trying to force an app that is 'not responding' to stop. The built in 'stop app' applet (which they burried in settings) seems to work but...
Getting an app in a not responding state is well easy - just use it normally! Messenger prog is the worst. Usually requires use of 'end now' option
IMAP support is very very bad. Its quite common for an IMAP server to not store mail folders in the root. In decent clients you can specify the root imap folder, not in pocket outlook, it ends up pulling the entire dir struct from your home dir!! I rebuilt the imap daemon on my linux box to compile in a default root folder. This solved the previous problem, but the imap support is not suitable for use away from wifi cause its so damned slow. It does not just look for new messages, and there is no way to tell it to do this. Also, when you send an item it ends up in the default sent items, not the imap sent items. Imho, the main reason to use imap is to keep your emails intact (be able to see what you sent from the mobile device from a desktop).
Outlook 2K3 on the desktop has the same issue btw, but at least that supports rules so you can put it right.
Billy wrote pocket outlook for connecting to an exchange server, which, I suspect only 50% of the devices purchaced will ever do. Pocket Oulook *always* starts pointing at the exchange folder structure, not your POP3/IMAP account, and there is no way to config this. Unessesary taps required. Why can I not DELETE the default exchange folders if I dont need them?
There are a load more issues as well... I currently do around 10 soft resets/day. My basis is that a wait of more than 10 secs means that the device has crashed. Perhaps if I was willing to wait 5 mins all the time for it to get its arse into gear then the number of soft resets could be reduced!
I shall have to create me a site with XDA IIs bugs on it. I suspect that most of these issues are also present on other devices using windows mobile 2003 so it aint just gonna be the XDA. MS will likely fix them, and then O2 will take years to make the fixes available to its customers.
To be honest, I wish I had stuck with a symbian based device.
Has *anyone* managed to get a IPSEC/PPTP VPN connection running either via wifi or GPRS???
Has anyone managed to get skype PPC working **reliably** Mine works OK if I sit next to the AP, but I might as well use the PC version if I have to do that. Moving further away causes skype to give up due to lack of bandwidth. WiFi also locks (no network access period) even though the PPC still indicates that it has a single from the AP. The only fix for this is yet another soft reset.
Some other stuff:
Refuses to connect to a network that is not broadcasting the SSID. In general, when you want to add a new box, you can set AP to broadcast SSID, it will then find the network, after it has connected, you can hide the SSID. For future connections from 'pre-registered' boxes, no SSID is required. Not so for the XDA IIs, refuses to connect to a base station that is not broadcasting an SSID, or in some cases, creates a new connection with the name "" (i.e nothing) (which again refuses to connect).
Right, now, if you have 2 wifi networks listed in PPC settings, it will sometimes sit there for ever failing to connect, do a soft reset and it connects.
Another one: you have two connections in the 'configure wireless networks' dialogue, one is 'connecting' other is 'unavailable'. The one that is connecting is obviously not gonna connect despite 100% correct settings, so I select 'remove' it does not dissapear!!!
If I had written this software, the user would see a dialogue box thus 'This network is connecting/connected, are you sure you wish to remove its settings?' Selecting yes, would either terminate the connection attempt, or terminate the connection and then remove the damned setting with no further agro!
In network settings, I often get some *stupid* status info. It sometimes says that my home network is 'available' when I am at work. Clearly it isn't, wifi does not travel 10 miles!
And some more:
Sometimes bluetooth fails to start complaining about insufficient driver space. I write windows KMD's all the time, I suspect its somet daft like a lack of available stack space, or stack recursion. Soft reset cures
Also, sometimes when I try to start bluetooth, I get a daft message saying that the licence for the bluetooth stack has expired!!! It then starts BT and all is OK.
All pretty in-excusable bugs for post beta software. This is MS's 4th attempt now at a mobile operating system and its still a bag of sh1te!
A PDA is supposed to be a productivity tool, not something that you have to put 4 hours into to save yourself an hour. When I pull the damned thing out I want it to do **exactly** what it says on the box.
Bugs in software are inevitable, but this just was not even tested - there are *obvious* bugs that should have been detected in QA and delayed the relrease date. I suspect most users will trip over these issues in the first few hours of use. The workaround for most is a soft reset - the blooming reset switch will be worn out in a week!
My advice: AVOID until they fix some of the bugs. Does O2/MS have a route for bug submissions? I'll write these up as formal bug reports with reproducers and send them off.
If it were not for the appeal of skype/skypeout (only with 10 metres of base station otherwise wifi dies, reset required!) then it would have gone back by now. Not of merchantisable quality imho.
I write C/CPP/Java software for a living, if I let something this bad out the door I'd loose my damned job!
And some more:
- If you reconfig your shortcuts (so you can find stuff!) Then the applets 'camera' and 'O2' always seem to copy themselves back out into the root of StartMenu-->Programs again.
Go into the find applet and get it to do a search that takes some time. Wait for it to get going and then click stop. PDA hangs. It does come back eventually (2-3 mins later), but remains sluggish until you do a soft reset. Trying to suspend while its hung just switches the backlight off!
Wish there was some kind of formal bug raising email address or somet.
Nigel
Agree with you
Got the Orange m2000 variant and have same issues!
wifi has week signal (got 3 overlapping base stations in one open plan office) and can only get 25% signal.
can get vpn connection to work but after a few mins gets bored and drops!
phone reception is poor
bluetooth keeps crashing
going to send back to orange and get a new nokia 6230 and dell pda. cant rely on phone which crashes 10 times a day
Richard
how did you get the VPN to connect at all??
My WiFi connection is marked as 'connects to work' which means that the VPN profiles setup under 'work' should be offered to me. I would expect that after I have wifi up and running, clicking the icon at the top would show:
'Work - Wifi'
Unfortunately, it refuses to show anything other than 'The Internet - Wifi'. If I could get it to connect to wifi using the 'work' profile then perhaps it would show me by VPN connections underneath so that I could connect these too, but it **refuses** to do so.
BBB
(BuggedBeyondBelief)
Nigel
More issues
Hi
I have been adding new bugs to my original post as I find them. Here's a couple more:
Sometimes (no real causer for this) When the WLan auto disables its self (set to 5 mins), I will head into the Wireless Lan manager, tick the 'Wireless lan ON' box and click OK.
It still stays disabled!!!
I then head back into the wireless Lan manager, and find that my tick did not stick, same result if I try again. The only way to get the Wlan back is to restart the damned thing.
Additionally, if I go into tools-->network cards from the wireless lan manager, it says that the Wlan is 'connected' it IS NOT connected!!!
This problem shows its self more when the 'Wireless lan Manager-->Settings Tab-->Auto Turn off WLAN if not connected' option is ticked but it will also do it without this.
Seems to be partially caused by poor wifi signal and having previously run an app that hammered the network.
Sack of [email protected]!
Nigel
u seem to be having a mare!
I've no probs with WiFi at all, none of the issues U raise have occurred, WiFi works fine all over my house (I'm tapping this in upstairs & my router is downstairs) & I've got the settings set for best battery life rather than strongest signal. In the hotels I've stayed in recently I've also had faultless WiFi!
A couple of the users @ work have had trouble wiv GPRS overriding WiFi but I put this down to TNBTK!!
I've also seen the lost modem settings problem(also cured by soft reset).
Bluetooth performance has been a touch hit & miss but fiddling in the advanced settings seem to help!!
I've not tried VPN as I'm actively moving us away from this @ work towas web based services. Just a thought though, isn't "connecting to the internet" what you'd expect to see? surely you are using an internet gateway to VPN onto your network?
One other issue I've had is a logon problem with MS sharepoint, I'm hoping to cure that next week by playing about with authentication on the server.
I'v got a route in to some technical contacts at O2 so I'll ask bout the bug reporting for U tomorrow.
Hi
Aye, fun and games at the moment, just like my hardware to do what it says on the box!
Have you tried Skype? I have a feeling that you too will suffer the wifi lock-up problems if you give skype a go at the extreme of your wifi reception. I dont think its skype's fault though, but rather just the XDA not liking what skype gets up to! I am not gonna complain if it drops the wifi connection, its the lock-up that requires the reboot that winds me up.
Most of the time, my wifi is OK as well. Many of the problems I have had are related to use of skype, and having setup the auto-off wifi setting (which is now off again).
You have an XDA IIs? Perhaps mine has old firmware? I certainly dont believe that this is hardware related. I intend to come up with some repeaters for the problems I have, at the moment, they just occur 'when they feel like it'.
>A couple of the users @ work have had trouble wiv GPRS overriding WiFi >but I put this down to TNBTK!!
I have had this with bluetooth, but not with wifi. I think this connection occurs while on bluetooth when using ports that are not passed by default by ICS on the windows host box.
>I've also seen the lost modem settings problem(also cured by soft >reset).
This one really winds me up cause there is no way such a bug should have got past QA.
>Bluetooth performance has been a touch hit & miss but fiddling in the >advanced settings seem to help!!
Apart from the stupid messages about kernel space when trying to start BT, and the daft popup box saying that the BT stack license has expired, the BT on the XDA IIs is one of the more stable implementations that I have seen. You would think that since BT is now around 5 years old, it would be 100% stable these days.
>I've not tried VPN as I'm actively moving us away from this @ work >towas web based services. Just a thought though, isn't "connecting to >the internet" what you'd expect to see? surely you are using an internet >gateway to VPN onto your network?
It seems that there are two main connection methods in PPC, work, and Internet. The Proxy and VPN settings are not available when connected using a profile that is associated with 'internet' they are only available when connected through a 'work' profile. Again, the documentation is very lacking in the manual. O2's idea of a 'work' connection is WAP to O2 active!! A 'work' connection can be made to allow internet connections by checking the checkbox under proxy servers.
The various guides that I have found all suggest using the same profile for 'work' and 'internet', and setting the checkbox under proxies to allow internet access.
The layout of the whole connections applet in PPC is just a mess - completely unintuative!
Anyway, whatever the correct method, I've tried the lot and cant get the VPN to connect!!
>I'v got a route in to some technical contacts at O2 so I'll ask bout the >bug reporting for U tomorrow.
Cheers!
Nigel
Just got a reply from O2 About Above Bugs!
Hi
Ammused the hell out of me since its obviously a standard reply! There are not hardware problems, they are software problems so exchanging the hardware when the software remains the same aint gonna help!!
Nutters....!
I like the unit, I dont want to return it, I just want then to be aware of, and then fix the bugs and release new firmware promptly. O2's idea, is that if user sends in a bug report that refers to the *software* the unit runs, offer said user a new unit with same software - must cost them a bl00dy fortune!!
See O2's reply below:
Dear Nigel,
Thank you for contacting O2 Customer Service.
Please accept my sincere apologies for any inconvenience that may have
been caused by this matter and thank you for your patience.
I am sorry to know your handset has become faulty within 14 days of
purchase. However, we if you wish to get a new phone, please return your
faulty phone in it`s original packaging using the returns label
provided. If you do not have the original packaging please reply to this email
and I will arrange for a jiffy bag to be sent out to you. Returning
your order is free as the postage is prepaid, however can I ask you
obtain proof of postage as this will assist us greatly in the unlikely event
that your order does not reach our warehouse.
Any money you have paid for your order will be refunded once we have
received your order, however this process may take upto 21 working days.
After this you can order a new phone. There are two ways to order a
product from O2 Online:
You can order directly from our website by clicking on the link below:
http://shop.o2.co.uk/shop/
Alternatively, you can contact our sales team on 0870 225 7879. Who are
available Monday to Friday between 8:30am and 9:00pm and at weekends
between 10:00am and 6:00pm. Calls are charged at National Rate.
Please ensure you have your credit or debit card at hand when ordering.
Before placing your order, please spend a few moments familiarising
yourself with our Online Mobile Terms and Conditions, accessible via the
following link:
http://shop.o2.co.uk/cgi-bin/o2uk/jsp/otherPages/Info.jsp?infoPage=Terms:Shop
Isn't it time to see what you can do with O2.
However, you can also visit your nearest O2 store to get your phone
repaired.
On visiting your local O2 store please take with you proof of purchase.
You should have received this when you originally placed your online
order, if you have not retained this then please contact us again
requesting "proof of purchase".
You can find your nearest store by calling 0800 22 44 77 or by clicking
on the link below:
http://www.o2.co.uk/business/buy/storefinder/0,,130,00.html
dont seems to have the problems you have stated additional i have very good signals over the macdonalds.... (a free wifi service for now) in Singapore and tried with hotels wifi do not seem to have any problems... even installed WiFiForum a Wifi sniffer compitable with IIs and seriously speaking... after installing the WiFiForum i seem to have better phone signals... the best sniffer ever.... For VPN never tried... note: i have pocket skype and it works flawless.... dont get the "locked to network" problem
problems?
sounds like a bad unit. I'm new at this and am really wanting the blue angel early next year but reading a lot of bad press. I still have my sharp gx 1 and am looking for a good upgrade, the blue angel seems to have just the features I want...but so many bugs I'm seeing. from yellow tinged screens to connection and software problems. Thing is...is it a new product issue, or a design issue in general, and does anyone know when these bugs will be fixed? I really don't want to jump and buy one on contract and then have problems...don't know what to do. suggestions?
wifi signal
If you will take down the wifi speed of the access point from mixed a + b to just a, it will improve the signal for the XDA and the coverge will be stronger.
Very very few AP's have A and B. A works on 5.4GHz. B and G is the usual combination since they are both on 2.4GHz. I get no increases in performance by switching my AP to B only, and besides, doing such a thing means that access via my laptop gets well slow!
Modern devices should be able to work with multimode AP's with zero issues. Unfortunately, it seems that not one manufacturer of WiFi gear can read, they all interpret the standards as they see fit (I believe on purpose) thus locking you into their AP and their client side cards if you want a reliable network. WiFi has been around for eons, it should work by now, its hardly rocket science.
And as for the abortion that is bluetooth....!
Nigel
Nigel,
Don't know if this is going to be useful or not - but I've managed to get VPN working on the IIs after reflashing with the newer i-mate ROM.
O2 seem to do some wacky setup that defines your 'work' connection as a connection to their O2 Active WAP service - this seems to screw up VPN connections somehow.
Anyway, it's pretty easy to setup once you start with a clean-ish ROM - but if you have problems/questions let me know.
Also, with regards to wifi - does you unit get a better signal when docked/connected to the mains? I'm not quite sure that the power-saving options are being implemented properly on the IIs's...
Chris.
Okay got bored reading your essay but that bit about the network cards dissapearing when u added a new connection is true! I could only get it to show once I hard reseted and also it used to turn on for a short while when I turned wifi on.... on the Wi fi strength meter I believe its a graphical fault rather than a strength problem also the strength will be affected by other thins i.e. more than one person using the wifi point. I have sent my XDA IIs back to my company in detest about the dissapearing network cards! and I got told in anouther post bluetooth is shot! and an update while be made (Cause i can't connect or see virtually any blutooth devices in range when my mates phone detects 20+) Oh and anouther thing about Wi Fi Strength... Your phone is small and theres less power so naturally u will not be able to pick up as strong as a laptop will in regards to the signal thats why they say blutooth only extends upto 10 meters on mobiles but upto 100 meters on a PC thats deliberate due to power consumption and stuff
Check out this wifi scanner it finds hotspots really quick and shows the signal strength and stuff I use it but be sure to EXit from it before using wi-fi as for sum reason it stops u using wifi untill u exit.. its still a quality tool tho and its freeware! I picked up sumones wifi router in there home (it was 3 floors up) from nearly 150 houses away!!!! Naturally i couldnt connect tho
Click here to download it I found 16 Wifi Points in my local ASDA! and 20 from work to home (1 mile)
XDA VPN woes
Chriscole
I'm a newbie and piloting the xda IIs for the bosses so forgive my naivety. I have had no joy with the VPN setup to connect to the email servers because like you, the wap gprs keeps getting in the way. i am at a loss how to get the VPN setup tp connect using the mobile gprs instaed. Anychance you could post the steps you applied to get this feature to work for others benefit? Also wher can i get i-mate Rom.
Answer gratefully anticipated.
olori :?
I'm a newbie here and after playing one of the games on my xda IIs it freezes and i have to do a soft reset. I've only had it 4 days not sure i want to try anything else on it
VPN and GPRS
Just a thought. I've tried several times over the last couple of years on several platforms to get a VPN connection over GPRS on O2 and I've always failed. Could it be that O2 block the socket on mobile.o2.co.uk? What I'm trying to point out is that this is not an XDA specific problem. I've tried using a laptop, a Clie PEG UX 50, and iPaq 5450 and an old palm VX over time and I've always failed.
I would definately recommend updating to the latest O2 ROM ...... BUT ...... make sure you use corporate mode (code 0506) so that the rubbish O2 software doesn't get installed.
Still testing but it seems far more stable.
bugs
Is there any way to take the o2 stuff off after the new ROM has been installed?
If you don't mind reinstalling any additional software/ringtones etc then you could just do a hard reset to get onto corporate.
Otherwise a search on this forum should reveal how to edit the registry so that the O2 rubbish doesn't load on startup.
the Data connection is turning on on a regular basis and I can't find any scheduled tasks set up to access the Internet, but some rogue program is? any ideas any one and/or any way I get find out what is causing this.
I have the same problem.. And I'm a little bit tired!
I wrote on this thread with no answer: http://forum.xda-developers.com/showthread.php?t=529622
I have a flat data plane but I don't like that PDA face things on his own initiative!!
me neither, I'm in charge - not my new toy! Lets hope someone helps us out this time round.
I had the same problem. In my case the 2 apps connecting to the net were Google Maps and Funambol.
itm said:
I had the same problem. In my case the 2 apps connecting to the net were Google Maps and Funambol.
Click to expand...
Click to collapse
Well, I don't use funambol.. And anyway: there are no program in task manamager! So: something is going wrong with manila..
I had the same 'problem', but my brother suggested to turn it off and on again. It did work as far as I could see.
I think it may be google maps causing this, but I'm not sure (and don't really care, since this 'solution' worked).
Any number of added apps can be doing this (Worldmate live is a bad one for example) or any apps still running and not shut down.
Obvious things to check first are:
Do you have automatic email check set?
Have you disabled auto-update in weather and stock quotes?
This drives me crazy too, afaik I have turned off everything yet it keeps turning on... A fix would be highly appreciated!
its the activesync...
turn it off, i mean, delete the settings and you'll be fine. activesync triggers automatic data sync, hence turning on the data connection
I use ActiveSync and don't have this problem. If it was ActiveSync, why would it cause the problem for some and not others ?
itm said:
2 apps connecting to the net were Google Maps and Funambol.
Click to expand...
Click to collapse
Well.. I tested all day.. And I can say that I solved the problem!!!
I think that last time I closed gmaps.. I answered in a bad way to the question about updating Glatitude..
So: Gmaps seemed close but it was updating my position on the net!!!
When i opened gmaps i could see my avatar in the map.. So i understand that it was still online..
So.. I think I've solved!
Anyway we need a "netstat" on pocket pc...
Thank you for your advices.
Glad you worked it out.
I put this in the developers forum a while back. Maybe someone smarter than me will work out a solution to this sort of problem:
http://forum.xda-developers.com/showthread.php?t=530634
As with the poster here. You will have an application that you have inadvertently set to autoupdate. The only thorough solution is to go through every program on your phone and check each setting meticulously. Alternatively. Back up your personal data and hard reset. Then reinstall your apps one by one, testing for an hour after each one. Eventually, you will find the offending app and can work on finding the setting in it to stop it connecting to the net.
Hi all,
the thing is there are dozen possibilities: activesync, alle gps-stuff, all auto-updates. So instead off looking up all these settings, you could also use the nodata.cab - works fine (phone need to be unlocked!)
greetz to all
Kjoere
thanks for all the posts, haven't checked for a while. I have checked everything and noting is set to auto update so very strange and annoying. Will try the nodata.cab - if I can find it?
DJ Palmis said:
Anyway we need a "netstat" on pocket pc...
Click to expand...
Click to collapse
Look at "TaskManager 3.1" that has a Netstat tab
Tom
download Modaco Nodata
frogfoot said:
Look at "TaskManager 3.1" that has a Netstat tab
Tom
Click to expand...
Click to collapse
Thank you! That is very interesting.
It also can be the build-in Facebook app in Contacts in manila. It has feature to automaticly update in 2 hours. At least, I had mine turned on as default.
The only reliable and "ultimate" solution is really Modaco NoData as mentioned above.
On the other hand not taking third party apps in count, basic traffic of HTC device is nothing to be scared of. Updates for weather, stocks and A-GPS are just few bytes in size... Obviously, GMaps, mail autocheck, Messenger etc. are different story, but none of these are started on their own... BTW, ActiveSync has nothing to do with Internet with one exception - Exchange mail sync, if you have any.
What you have to understand, is behaviour of the active data indicator (small G, E or H next to signal strength). If it's there does not mean, that any data are transferred at the moment. It just indicates opened data slot with current brodcasting tower in the cell. It could stay opened for hours after trasfer even just of few bytes. It closes usually only for two reasons - your phone switches to another cell (and has no reason to open data slot again) or the tower is busy and closes inactive slots to gain more capacity.
Except few rare cases in some coutries you're charged only for data transferred, not for time of the connection and therefore it doesn't matter. In Europe from 1st of July (some new EU limit) one Mb shouldn't cost more than 50 cents and with these basic updates you will NEVER reach it in one month...
Obviously, roaming is another story, but in settings of the standard services you can limit updates just for your country.
I have a Tilt 2 from AT&T running Windows Mobile 6.5. I got it in October.
Sometimes my phone's clock will get behind, displaying a time that is an hour or more off. This morning, for example, I had the phone's alarm set for 9am. I woke up at 10am. When I looked at my phone, the clock displayed 8:30am. I power cycled it and it displayed the correct time.
My apartment has lousy cell reception, and I often have no signal at all when inside. Does this phone/OS rely on the cellular network to know what time it is?
Has anyone experienced similar behavior? Does anyone know if there is a fix for this?
I don't think I can trust my phone to wake me up until I find a way to fix this.
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
The phone does rely on the network to keep time updated.
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
orb3000 said:
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
Click to expand...
Click to collapse
I don't sync my phone with PC, and I don't have any push notifications activated.
The phone does rely on the network to keep time updated.
prjkthack said:
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
Click to expand...
Click to collapse
Turned off auto-updates as you suggested. Now we wait and see. Thanks for the suggestion.
__________________
Clock falls behind, can't find the automatic settings
For the second time now, I experienced the same problem, where my clock on the Tilt 2 was behind. This time it was during the night and it was off by about 3 hours, and even missed the date change. The first time it was something around an hour. I don't know what's worse, because with the long time you know it's wrong when it's light outside and the time says it shouldn't.
The phone wasn't hot either, so, as far as I know it wasn't busy doing something else. The cell reception was fine here, and I was not syncing. To correct the problem, I looked for the setting to automatically set the time, based on the network. It's not off by precisely one or more hours, so it doesn't look like a timezone itself. Note that I have TouchFlo disabled, and I use the Windows 6.5 Today screen, so it might be a bit different. I looked through several settings beside the clock, but can't find it. Unless it's one and the same of course.
Any idea what could be causing this? Thanks for the powercycle tip.
I disabled what prjkthack said, I needed also to disable the sync option from Sense. This works for 'My Location' but screws other world clocks. Looks like a sort of 'base' clock is set wrong...
i have this issue with the tp and the hd2 both with energyrom.
att tilt 2 clock and date off when updated to new stock rom
hi iam having the same problems with my time and date being wrong everytime i softreset. the minutes usually always seem to be right but a couple hours off always and then you have to go in and manually set the clock. i also had to set the date when i softreset. i tried the my location button, didnt work. also called htc and talked to someone who said the time did have to be set manually, but i really dont think he knew what he was talking about. and it should have exact time from network and sat/gpr connections or even wifi? stange
Interesting. It appears that we might be fighting two different problems then. One that is a timezone offset (i.e. the minutes are the same, but the hours are off), and a full stall of the clock (with the time being off a random amount of hours and minutes).
clock advances one hour every night
Hi,
I have a similar problem with my clock: every night the clock advances one hour. If I do not correct the time, it will be two hours in advance after two nights.
This is since the night, where the daylight saving time ended.
Can anyone help?
I've had my phone over 6 months and two days ago it started having issues with keeping the correct time...
Odd indeed.
Maybe it's ATT causing the problem?
Go into Settings/Personal/Phone, then click the GSM/UTMS services tab. Click on "Time Synchronization", then Get Settings. If the "automatic change time zone & clock" box is checked, uncheck it.
That turns off the synchronization of the Tilt2's clock with the cell network, so that you can synch the time yourself. There are some third-party programs that will let you synch off a NTP server or the phone's GPS receiver -- I use Julien Schapman's Time Synchronizer.
It's not a att thing. I have the same problem since last week. I'm in Argentina and a couple of years ago we had daylight saving time. And the last year we had it we must change it on december 27th (the day it started to change in my phone in 2010. Now everytime i activesync with my pc it advaces 1 hour.
It's really annoying. And fyi my setting have disable automatic change timezone and clock!!
I don't know what to do
Cheers and happy new year
Ignacio
I'm in Argentina too, and having the same problem as Ignacio. The only thing I can add is that my Tilt2 started having this problem right after returning from Uruguay, which by the way, they are one hour ahead of us. My girlfriend has the same phone but she did not activate it while in Uruguay and she is not having this problem.
I really doubt it is just a Sync problem. I've tried every possible configuration and nothing. I wish it would be that simple.
We need a good chef for this one...
Regards
Fito
Offical fix: http://www.htc.com/europe/SupportViewNews.aspx?dl_id=1070&news_id=851
Or just install a ROM that doesn't have this issue (included this fix).
Hey guys,
I just flashed my T-Mobile Dash Black with EVO's latest WM 6.5 ROM
However, I can't get the time and date to sync automatically via the network
Can someone help me out?
Did this work before with the old ROM? I have never seen this happen actually on any of my devices. Usually they are time-synced from the PC via the AS connection - which only happens if you establish a partnership and not in guest mode.
I've seen this happen on other phone models after flashing to a rom not provided by your carrier. For example, I once flashed an old Samsung phone that had Tmobile ROM to a generic Samsung ROM that had more features. The old ROM would sync the time with Tmobile whenever phone was reset or at regular intervals (I have no idea what intervals, 24 hrs, 1 week?). The new ROM, in spite of having entered all the correct settings for GPRS/WAP and selecting 'automatically update date/time' couldn't synchronize.
I suspect there's some 'magic code' carriers have in their ROMs to enable this but I haven't been able to find any info regarding this since I flashed that phone back in 2003! I purchased a Samsung SGH-720, a tri-band GSM carrier unlocked phone that also couldn't sync the date/time in spite of enabling the option.
Since you're running a modded ROM you'll have to rely on a third-party time sync app. There's a freeware one by SKTools called TSync. It's nothing fancy and won't automatically sync - you have to manually run the app but it works! I changed my date and time to incorrect values and TSync corrected both. Maybe someone else can recommend a good time sync app, preferably free
Two caveats - First, it doesn't know how to initiate an internet connection on EDGE/GPRS - it will give you a 'resource not found' error. Use IE or whatever just to establish a web connection, exit, then run TSync and it will sync with various NIST time servers. They can be edited with the included TSynccfg. Second, you obviously need to have a data plan. With the carrier provided roms no data plan is need to sync date/time.
I would really like to know how the carrier roms time sync - I used to have a Moto Razor V3 that would automatically sync and this was before I had a data plan!
Actually, my problem was fixed after I rebooted the phone.
I've noticed that with 3VO's 6.5 ROM you almost need to reboot the phone everytime you change certain phone settings and/or certain UI settings.
Which is nothing more than an inconvenience, buts it fixed now.
Thanks for the replies.
There is a weird problem that I have been facing after updating to official OxygenOS vs5.0.1 from Nougat through OTA. The phone seems to access Internet by itself.
Before and after every update, I clean Cache for proper installation. However it came to me by surprise when I saw page long Privacy Agreement which says it will access everything in my phone even if you are not part of " User experience program" whether you keep it ON or OFF.
So now the problem is.. every night when i turn off Data and WiFi, the phone seems to somehow access Internet as I see new mails, FB updates, New Whatsapp msgs in Notification every morning. And Toggle and WiFi still OFFFFF !!! After checking the time, updates only between 5AM to 7AM. The phone still access Internet between these hours and this is happening the day I installed OTA 5.0.1 and Agreement which is mandatory to accept. The " User Experience Program" is turned OFF. After this Incident, I have restricted background data for most of the system and user apps. No Special Data access to any application. Still the problem is same. Only the day when I woke up early the other day to check if Data is ON again at 5-6AM. It wasnt and no access that day but other days its same.
Is anyone else experiencing the same?? My phone is not rooted and no bootloader unlocked..!!
This is a serious matter for all Oneplus users as we have bank and personal details in phone. Let me know if anyone else facing this issue.
This only effect those on oem software which I figured most would avoid by now with all the times they have been caught.