xda unlocker cab file - MDA III, XDA III, PDA2k, 9090 General

Sorry, but as a newbie. I've just downloaded the file, but what exactly do I do?? :?: :?

What are you trying to do? Unlock the SIM lock? Cos that wont work cos its not for that!
It's for unlocking the extended Rom on your phone!

SIM unlock for xdaiii
Aarghh!!! Any solutions for that????

If there was I would have an unlocked M2000 by now. Ring your Mobile Operator and ask them to unlock it, they may charge you for doing this but its as good as your gonna get at the moment.

Where did you get the xdaIIi unlocker cab file
if the unlocker you have is for xdaIIi, please tell me how to get it, I got a new Qtek 2020i yesterday, and I need the Extended Rom to be unlocked to be able to install some language programs.

Related

UK orange SPV M2000 unlocking...

Yeh i have a SPV M2000 on UK orange network, is there anyway i can get it un-locked without having to pay for it, and without damaging it or permanently locking it???????
any help or info would be awesome!!! thanks :?:
ok so ive kinda found there is no where i can get it for free, i mean you cantblame a guy for trying, we all tryin to get the best deals huh?
so anyway, wat is the best way of doin it...can you get a programme that you run on it to unlock it, or is it an unlocking code, cos when i put a sim from another provider it askes for an unlocking code????
M2000 unlocking tool...
there now is a way to get it free...here it is
http://forum.xda-developers.com/viewtopic.php?t=24779&highlight=

Please HELP! Newbie

Hi All
I have a T-Mobile MDA Vario and have unlocked it so I could use my O2 sim card. However even when I set my GPRS settings for O2 I still cannot connect. Is there something else I have to do to allow my o2 sim to use GPRS?
I really would appreciate the help guy's
Thanks in advance
Apple
Ok can I ask where I can get an O2 Rom from? I have looked everywhere and I can seem to find it. I would really appreciate it.
AppleCake said:
Hi All
I have a T-Mobile MDA Vario and have unlocked it so I could use my O2 sim card. However even when I set my GPRS settings for O2 I still cannot connect. Is there something else I have to do to allow my o2 sim to use GPRS?
I really would appreciate the help guy's
Thanks in advance
Apple
Ok can I ask where I can get an O2 Rom from? I have looked everywhere and I can seem to find it. I would really appreciate it.
Click to expand...
Click to collapse
you can find the ROMs at the XDA FTP site. Here is the link to a tutorial on how to connect to the FTP site :
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
You will find the O2 ROM there.
Cheers!
Hi Jorgee
Thank you so much for the info.
I dont mean to be a pain, but is there any instruction for installing a new ROM? I have used the unlocker to unlock both SIM and CID already so do I just hit the .exe file and run it?
Thanks again
Apple
Re: Cheers!
AppleCake said:
Hi Jorgee
Thank you so much for the info.
I dont mean to be a pain, but is there any instruction for installing a new ROM? I have used the unlocker to unlock both SIM and CID already so do I just hit the .exe file and run it?
Thanks again
Apple
Click to expand...
Click to collapse
Sorry, but I have a Universal and never had my hands on a MDA Vario. But for me to upgrade my Universal, I just run the ROM update IF it is the same ROM brand. If it is not same brand, meaning a T-Mobile ROM to O2 ROM, I don't know how to doit for the MDA Vario . Sorry
If i was you i would just do a rom update. To do so click here -> ftp://xda:[email protected]/Wizard/Roms/Qtek . Download RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe. Then click on that -> http://forum.xda-developers.com/viewtopic.php?t=33796 sign up and download lokiwiz - HTC Wizard Unlocker v0.2b from the first post. Unrar the file. Copy Enablerapi.cab to ya phone and run it and wait for it to finish. Then make sure ya phone IS connected to ya pc via active sync and Run Lokiwiz.bat ON YA PC. Type c then press enter. Ya phone should then soft restart. Ya phone is now unlocked. Again make sure ya phone is connected via active sync run File: RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe. Follow the instructions and DONT unplug ya phone.
By the way be carefull when updating rom, as if it is not done correctly ya could bugger ya phone up!
If after your keyboard layout is incorrect go here -> http://forum.xda-developers.com/viewtopic.php?t=39725 and download reg wizard.
As for GPRS setting i only know the settings for o2 sorry.

How to upgrade to wm6 with htc-620 free.

My excalibur is not original locked, i want to upgrade to wm6, but when i try to upgrade, i got a message error `[244].
Is not possible to upgrade if the phone is not a t-mobile dash?
Thanks
Run the installer again once you get that error message. Should be fine.
i think doesnt works, the same message error; invalid model....
thanks
Ahhh, invalid model ID! Sorry, I must have misunderstood... You need to download the bootloader upgrade first.
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Run that and then try upgrading.
I don't know where that bootloader downgrade came from but whoever did it deserves a medal.
Allowed me to go from T-Mobile WM6 back to HTC s620. Without it, I'd have been screwed.
-Mc
same result
with spl-1.11 upgrade only same result, id error.... any solution?
Thanks a lot.
Hi,
as far as I know the only way is to unlock your phone with http://www.imei-check.co.uk
Newchurch
fernandet1 said:
with spl-1.11 upgrade only same result, id error.... any solution?
Thanks a lot.
Click to expand...
Click to collapse
if this Update SPL 1.11 also doesn't work you'll have to unlock with IMEI-check and do this steps
but my pne is free
my phone is free, i have shop without any operator, original unlocked.
Thanks
it coud works with the modifid update with imeicheck?
I have modified these two parameters, but i have not unlock code because my htc-620 is original unlocked.
thanks in advance
The unlock which is necessary is to set the phone in "engineering mode" so that it accepts every ROM. This has nothing to do with SIM or net lock.
IMEI check sets your phone into that mode to remove SIM/net lock.
So it's a 2in1 unlock.
So even your phone accepts every SIM you have to unlock it to this engineering mode with IMEI-check. ATM there is no other known method to do this.
then, i need to send my imei to imeicheck to unlock in order to access to the engine mode?
Thanks!!

SPV E600 to WM6 T-mobile ROM help??

I have been searching the net and the forums on help how to do this. Most of what I have found is specific for the HTC and T-mobile dash models, but not seen anything for the orange SPV E600.
I have unlocked the phone with Dashv2unlock program I bought, and tried "RUU_Excalibur_SPL-1.11_UpgradeOnly" and then tried "RUU_Excalibur_TMO_US_1.22.531.4_4.1.13.34_02.79.90_Ship"
Both of these give me a INVALID ID error.
I am suspecting my phone has only been SIM-unlocked (I can use my O2 sim card), but not CID-unlocked? I thought these programs do both?? Do I need a separate program to CID unlock?
Is this a problem specific to the orange SPV E600?
What am I doing wrong????
You phone is CID Locked,
Unfortunately, there's still no free way to CID Unlock an Excalibur, CID Unlock your phone here (USD 38.00):
http://www.imei-check.co.uk/
da_mayhem said:
You phone is CID Locked,
Unfortunately, there's still no free way to CID Unlock an Excalibur, CID Unlock your phone here (USD 38.00):
http://www.imei-check.co.uk/
Click to expand...
Click to collapse
original poster said he/she bought the Dashv2unlock program !!! ... which is a free program that works on the "PAID" UNL file for the specific IMEI ...
http://www.imei-check.co.uk/dashunlock.php
therefore ... I think that the unlocking procedure wasn't done correctly ...
just my $0.02
UnicornKaz said:
original poster said he/she bought the Dashv2unlock program !!! ... which is a free program that works on the "PAID" UNL file for the specific IMEI ...
http://www.imei-check.co.uk/dashunlock.php
therefore ... I think that the unlocking procedure wasn't done correctly ...
just my $0.02
Click to expand...
Click to collapse
LOL, that's what i get when i don't get to read and understand the query.
I agree, unlocking procedure wasn't done correctly.
Thanks guys. I actually went through www.imei-check.co.uk before, and as you correctly pointed out I bought a .unl file specific to my IMEI code, went through the screens just like shown on the website but although my phone will now take my O2 sim, it is still giving me an INVALID ID.
Has anyone succesfully done this with an SPV E600??
Is there a step missing somewhere? I read somewhere about having to run the unlocker program twice, which I have tried with no luck still.
Yay it works!
Ok, just to update.
I managed to update my rom to with the "RUU_Excalibur_HTC_RUS_1.24.411.1_4.1.13." rom instead and this was without having to flash a bootloader to begin with.
So if there are any SPV E600 users out there, the above rom works VERY VERY WELL.

Help: Several questions about unlock

Hi every one, my phone model is HTC Hermes 8525 locked to Att. Now it is in original box with Windows Mobile 5. I want to unlock it first. I have read articles on this BBS and aware that if I want to do future Rom flashing things I might need both SIM and CID unlocked. At same time I found several unlock code provider on Ebay.com. Now the questions come up.
1) Is Unlock code got via Ebay only for SIM unlock, or it is for both?
2) Is there any risk for such kind of unlock code for my phone? What's the worst outcome for using unlocker software downloaded here?
3) If I don't unlock my CID, can I still upgrade my phone with WM6? What specific ROM of WM6 shall I use?
4) Any other suggestion is welcomed, Ad's also.
Thanks a head
bopomofo said:
Hi every one, my phone model is HTC Hermes 8525 locked to Att. Now it is in original box with Windows Mobile 5. I want to unlock it first. I have read articles on this BBS and aware that if I want to do future Rom flashing things I might need both SIM and CID unlocked. At same time I found several unlock code provider on Ebay.com. Now the questions come up.
1) Is Unlock code got via Ebay only for SIM unlock, or it is for both?
2) Is there any risk for such kind of unlock code for my phone? What's the worst outcome for using unlocker software downloaded here?
3) If I don't unlock my CID, can I still upgrade my phone with WM6? What specific ROM of WM6 shall I use?
4) Any other suggestion is welcomed, Ad's also.
Thanks a head
Click to expand...
Click to collapse
Hi and welcome to xda-developers forum!
1) I think this "unlock code" will provide you an ability to disable/re-enable SIM Lock/Operator Lock, not CID Lock (as it's platform specific and required to flash unofficial ROMs)
2) The worst is device will become brick. But it could occur only if you download and flash wrong ROM.
3) No, if it's unofficial. If HTC provided a WM6 update to Hermes (I don't remember), it could be flashed.
Good luck
respond
i just got that phone, i found a guy on youtube for the sim unlock, it worked for my phone , now it runs a tmobile sim card ya. not sure what cid a nd all that is, on youtube most people dont give details on how to get things done but there is the one guy for the sim. next i upgraded to wm6 using a google search and deciphering through all the bull****, then i used xda for wm6.1. it all worked and i dont know **** so u should be fine, if you know how to unzip and do things with files and alwas look for exe. extentsion, that ones usually money, im trying to upgrade to 6.5 but im getting errors, first time im having propblems, so let me know anybody, about that. good luck
What phone do you have?

Categories

Resources