Related
For Those Who Wanted An iPhone ROM, Heres A CAB That Should Do Most Of What You Want.
Here It Is iPhone.cab
It Includes:-
Grumps - iPhone App
inphyy - iPhone App Configurer
A_C - Slide2UnLock
larna - iContacts
xelashiu - iPhone Dialer Skin
And A Welcomehead BMP That I Found On The Forum.
Hope It's Ok Not Fully Tested It Yet, Please Leave Feedback.
Cheers
Thx for the release?...are there any problems if I want to remove the CAB...in case I have some problems?
How is the response time of the OS after install....much slower than WM6 withouth this or...?
Regards,
Primoz
Pc78 said:
Thx for the release?...are there any problems if I want to remove the CAB...in case I have some problems?
How is the response time of the OS after install....much slower than WM6 withouth this or...?
Regards,
Primoz
Click to expand...
Click to collapse
Gooooood question!
I'd like to take look, just fer ****s & giggles ye know? don't wanna screw up my current install now. I'm in far too happy a place, ROM wise
Already tried it out...but it is useless for me...respons...like 3-5 sec after tapping a button...5mb less free RAM...this is too much for me..
Regards,
Primoz
All I can say is that the Dialer will not work correctly on 8252 with CIN 3.5.2. There are some alignment issues with numbers.
Also it's impossible to enter the settings for the skin and PHONE icon not linked correctly.
Best Regards
Why is this in the WM6 forum? Does the CAB only work on WM6?
It probably doesn't belong in this topic, but why don't we try and change that?
Would there be interest in making a WM6 ROM that looks and acts almost like an iPhone? I can see there being some disadvantages and no doubt a lot of people will miss the today screen, but there might be a few people interested none the less.
Maybe it would be better to keep it as an "iPhone CAB" with everything on it, so that users can try it and remove it quite easy?
What other programs would we need in the ROM do you think?
I'm thinking it would be good to try and embed Piscel Browser, or similar at least, so that you have the fancy finger scrolling on websites.
Maybe we could add the ringtones as well....
Percz said:
It probably doesn't belong in this topic, but why don't we try and change that?
Would there be interest in making a WM6 ROM that looks and acts almost like an iPhone?
Click to expand...
Click to collapse
Why not ! Could be fun to try at least, providing performance didnt render it unusable.
@Pc78
To Deal With The Response Times, Select Settings And You Should Be At The Configurator App, You Can Change The Response Times With This App.
@.VIBE
It Should Uninstall Correctly, As That Option Was Selected With WinCE CAB Manager
@dusank
Strange The Phone Link Works Fine On My Phone, Maybe Try It Again After A Soft Reset.
Cheers
Follow The Links That Are Posted In The First Post, For Information On How To Configure The Individual Apps.
Cheers
Does it include the filedialogchanger made by ??? which is posted with iConfig?
and could you write which versions of the apps in the .cab?
sorry, but im a little lazy atm so i havent downloaded it..
Problems with Dialer
This is my first post, can you put xelashiu WM6 version of the dialer in the cab file. because of the problems with key pad numbers lining up, otherwise great app Many Thanks
Oange SPVM3100
LVSW 3.30.2.1
GREAT CAB
Great cab, I was just looking forward to install a cab like these, but has only problem with the dialer, I hope can be fix. Thank you for the great work.
This CAB is very nice, but it was eaier to configure an iPhone theme using WAD with all the godies. Plus, you can put the icons wherever you want and add or delete them.
Unfortunately WAD is buggy and creates a soft reset from time to time. Other than that it's a nice app to play with!
I really like the start for this app... iContact is my favorite cause its a Stylusless UI. Now if everything else is ported it would be awesome!!! The dialer is a good start too but really needs work with simplifying it. It doesn't need to be that complicated and the look can be polished too. I'm willing to work on it with the developer if you need more of my feedback. I'm an interface designer by trade so please use me
I AM WILLING TO PAY IF SOMEONE WERE TO MAKE THE ENTIRE iPHONE OS AS A CAB OR WM6 REPLACEMENT!
Anyone else?
I'm a software developer with a fresh mind straight from Uni...so if anyone wants to team up let me know and I'd be happy to start on this project.
Slither I'm up for it!
I'll design the interfaces... You make them work!
Deal or No Deal?
Oh btw which direction would you like to go Cook our own ROM or CAB?
Deal
I like the CAB direction...btw I'm working full time so i'll dedicate time for the project mainly in the evenings and whenever I get time during work. PM me for design thoughts you have.
Cheers.
slither & and spidey
im excited to see what you guys will produce...
Sweeeeeettt!
I flashed to the htc release wm 6.1 but accidentally did a foreign version. I flashed it again with the US release and it works fine except the symbols E, D, X, W, S, Z, Q, and A are not working correctly. They input a different symbol.
I went to do the keyboard fix...
"Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal)."
...and the value was already 132105 (20409 in decimal)
I went ahead and changed it to 132104 and then back to 132105 but it is still not working.
Is there such a program that would allow me to easily re-map the keyboard?
Any help is appreciated!
schaps advanced config 2
Thanks!
I ended up just finding this fix a little further down the page...
"Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
scfreshy said:
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
Click to expand...
Click to collapse
FIXED sorry for clutter!
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
No it doesn't fix the problem, any other place in the registry do you know....? Thank you!!
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Greeee said:
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Click to expand...
Click to collapse
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
kareem9nba said:
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
Click to expand...
Click to collapse
Hi there,
I'm actually new to Smartphones, and the Tytn / Hermes was going cheaply online (ebay unfortunately), but the phone itself is excellent and is easy to use from back in my windows days.
Most is familiar, but seeing how far Windows can go before I want to switch to Linux.
Where would I get the ACT? Is it downloadable from here as a development tool, or is it online needing payments etc?
Thank you,
greee, u can get it at schaps website here: http://forum.xda-developers.com/showthread.php?t=317070&highlight=advanced
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Greeee said:
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Click to expand...
Click to collapse
Both should install on main memory.
Are you getting an error when the don't install?
So far kareem, i'm getting an XML output for the ACT, and for Pocket MSN it reports:
Setup Is Not a valid Pocket PC application.
With the ACT, i've no option to install, although the setup file I have was meant to be a cab file.
Thank you,
Scratch all that, got both PocketMSN and ACT installed today! For some reason the keyboard was in German, so switched that back!
Thanks guys!
Now got to find uber cool stuffs for my phone...
what's the value for an azerty keyboard
Which one works the best?? I've searched and haven't seen anything about it...
Thanks in advance!!
Mike
What's wrong with the default one? Anyhow, search for Wefi or Pocket Wifi Radar.
tried this yet????
pitguy3 said:
Which one works the best?? I've searched and haven't seen anything about it...
Thanks in advance!!
Mike
Click to expand...
Click to collapse
right here ...
Thanks!! Guess I wasn't in the right place....
You guys ROCK!!
NOT WEFI!
Many people had to hard reset after it messed up their devices, me included. Here I mean A LOT of people!
lol... I use wifi fofum... Link in my sig...
I prefer WiFiFo to Peek, because of the radar screen, but I haven't used it in a while (meaning a lot of roms back). Both are good.
wififififi
wififofum works great,
its a lot more sensitive than
the built in wifi scanner and
it also has a radar style thing
where it shows you the position of
the networks around you, unfortunately it doesn't
really matter because although u can see
a ton of wireless networks it doesn't let you connect to them.
Considering buying touch hd, but being able to use gpsdash2 is reasonably important for me. Does it work? If yes, does it work at full resolution? My present pda is a mio a701 and I use gpsdash2 with 1:25.000 maps for registrering botanical locations. Your feedback will be appreciated.
http://wimobi.com/gpsdash/overview.ppc2.php
mikdyb
Ok, so nobody seems to know gpsdash2. Is there anybody out there who would be so fantastically kind as to download and install the program and give me some feedback (I know it is a lot to ask)?
Gpsdash2 can be found here:
http://wimobi.com/gpsdash/overview.ppc2.php
I bought this software what seems years ago for my HTC smartphone (qtek 8310). At that time, it was way ahead of its time. Then, after one update, the developer went offline and never reappeared ever since.
At the moment, I am using Oziexplorer which does the job even better and is supported. Obviously, I now have a ppc (touch HD) and no longer a smartphone.
Conclusion: stay clear of Gpsdash2. It's dead.
Thank you for answering. You are right, of course, gpsdash2 has not been developed for some time. However, I would still like to know how it performs on touch hd, as it it is the program I am used to.
I had a look at Oziexplorer and that will be my alternative, if I cannot use gpsdash2. Does Oziexplorer utilies the full resolution of touch hd?
Doesnt boot on mine sry
mikdyb said:
Thank you for answering. You are right, of course, gpsdash2 has not been developed for some time. However, I would still like to know how it performs on touch hd, as it it is the program I am used to.
I had a look at Oziexplorer and that will be my alternative, if I cannot use gpsdash2. Does Oziexplorer utilies the full resolution of touch hd?
Click to expand...
Click to collapse
I am not sure. It does occupy the full size of the display but the templates you call upon are not 800x480. I don't think it makes a difference as you don't need this sort of resolution with oziexplorer. The maps are actually processed by the software in multiple resolutions, which allows to have crystal clear displays as you zoom in and out. Seing is believing: test it and you'll forget about gpsdash2.
Hope that helps.
ive just tried this on dutty 3.3 XT rom and i get FRamework error? sayin to reinstall.
any ideas why this wont work?
Let's have a look at
HTML:
http://www.vitotechnology.com/en/products/smartnavigator.html
VITO SmartNavigator works on Blackstone without problems and looks better than gpsdash2.
Problem solved
Thank you all for your replies. Did not get any real feedback on the functionality of gpsdash2, but you gave me some alternatives. Went ahead and bought the touch hd anyway (what an instrument!!!), and after trying both gpsdash2, your suggestions and a couple of other gpsprograms, I came to the following conclusions:
1. Gpsdash2 works to a certain degree if you change screen resolution to vga before installing and before using. However, I am not able to access all menus, so that dosen´t really work for me.
2. Tried Oziexplorer and it is obviosly a wonderfull program. For my needs it is overkill (I don´t need all those functions) and it costs real money. I´ll will certainly keep it in mind should my needs change.
3. Had a look at Vito Smartnavigator, and it would probably have done the job. However, it worries me that the program dosen´t figure on Vito homepage and I had to download from some random site. So what about development and even more important, where to buy a license?
4. Tried some freeware programs and ended up with Terracrosser, http://terracrosser.com, and it does excatly what I need and no more. I have to use sattelite photos instead of 1:25.000 maps, but the program downloads and saves them automatically from google with precise geographical calibration, and I can get the equivalent of 1:6.000 maps if I need it. So a lot less work for me.
Again, thank you all for your contributions.
mikdyb
Terracrosser
I have been using terracrosser and it is wonderful. Best thing is, it is a freeware and I can download goolge maps or yahoo maps (both map and satellite images). It is really easy and I can download selected region. I have maps of places I visit frequently and I add new maps if I am visiting new places. It also works with gps and also gives speed.
The user interface is not so touch screen user friendly when it comes to scrolling the maps. But not a big problem as map scrolling is seldom needed when you have gps. Also the program is under development so lot of new features are being added.
Hi So I used to have a touch HD (still do but selling) and have brought a TP2 (arriving soon) and I want to make good use of the keypad.
The first thing I want to do is play on some emulators what are some good options? I have narrowed it down to fpsece and morphgear, are they the best? any others?
Is there anything else cool the keypad gives me that I couldnt do before? I was thinking an app which allows me to connect to my pc/ps3 as a blutooth keyboard would come in very handy does this exist? If not can anyone point me in the right direction to make this myself - I know my way around C# and wm development but never done anything with bluetooth or emulating hardware.
Many thanks
badasschris said:
Hi So I used to have a touch HD (still do but selling) and have brought a TP2 (arriving soon) and I want to make good use of the keypad.
The first thing I want to do is play on some emulators what are some good options? I have narrowed it down to fpsece and morphgear, are they the best? any others?
Is there anything else cool the keypad gives me that I couldnt do before? I was thinking an app which allows me to connect to my pc/ps3 as a blutooth keyboard would come in very handy does this exist? If not can anyone point me in the right direction to make this myself - I know my way around C# and wm development but never done anything with bluetooth or emulating hardware.
Many thanks
Click to expand...
Click to collapse
Well there IS a WM app that will do that for both PS3 and PC, it's called MobileRemote1.1...but it seems that it's not working right on the TP2 as of yet. So, if you're skilled enough to fix that issue, there'd be some grateful people here I'm sure Info in THIS thread.
Now what you can use in the meantime, at least on your PC (no PS3 support yet) is an app called gremote, which gives all kinds of remote PC control options, over BT or wifi. Basic version is free, full version is paid. http://gbmsoftware.com/
Thanks for the info on the apps. If I can get some good info on making this type off app I will give it a go.
badasschris said:
Thanks for the info on the apps. If I can get some good info on making this type off app I will give it a go.
Click to expand...
Click to collapse
No prob, good luck! My name is on the list of those who would love to get a full BT keyboard profile on here for use with the PS3 etc