Sandisk SD Wi-Fi and Dlink Access Points - General Accessories

Hi, Does anyone know if the compatibility issues between the SD wi-fi card and Dlink 802.11G/B mixed mode wireless routers/access points has been fixed yet? Namely the DL-624+, DWL-2000AP+, DSL-902, DSL-604 AirG+ family. I have the DWL-2000AP+ and have been trying to get answers out of sandisk and dlink with no joy. Apparently there are problems because the SD card needs to work in B only mode and the dlink kit only supports G only or mixed mode.
Has anyone on here go the SD card working with any of the dlink kit mentioned above and if so what settings do you have to make on the access point and within the SD card drivers?
I would like to get the Magician and the Sandisk SD card but if there are problems with that combination and my wireless access point I with probably go for the Blue Angel.
Cheers

mixed b/g is not a problem. ive got sandisk sd card and a adsl router mixed b/g and no problem to connect. try this solution: uninstall sandisk sd driver and install drivers from other sd card that has the same chip: www.socketcom.com. this driver is totally compatible and woks much faster than original one. i read that solution in a spanish forum on pda tsm500 (the same model as xdaII).
good luck

Thanks for the reply, do you know if people are now getting success with the Dlink wireless mixed B/G routers/access points?

Related

Programs can't find storage card

How do I get programs that are installed on my device to find files on my storage card? eg. I have Ms Pocket Streets installed on the device, but when it starts it opens a page which has a drop down menu for "All Folders". "All Folders" shows only folders on the device and not my SD card. This happens with all programs. As you can imagine my 1 Gig SD card is badly under utilized as I have to store all files in the device. I use to have a Nokia 9210, which occasionally suffered this problem, but a reset fixed it. Is there an undocumented reset to fix this? Or is it a problem with SD cards? Could I set up a shortcut to the storage card and if so, how do I do it?
I assume you can "see" the MMC card from File Explorer
I have an XDAIIs which refuses to recognise any SD cards at all, but will work happily with MMC cards
in file explorer, go to root....i.e. "My Device"
then you should see "storage card".....tap it and you should be off...
BAM!!!
good luck....
weasel said:
I have an XDAIIs which refuses to recognise any SD cards at all, but will work happily with MMC cards
Click to expand...
Click to collapse
Hmm im having these troubbles with MMC card, and got my Kingston Secure Digital 1024MB Elite Pro1 today, and haven't seen the problem so far.
And it's fast
Hmm im having these troubbles with MMC card, and got my Kingston Secure Digital 1024MB Elite Pro1 today, and haven't seen the problem so far
Click to expand...
Click to collapse
yeah, I know that SD is faster than MMC, but my XDA simply refuses to read any SD cards - and I've tried 6 or so
Damm, never should have wrote that message. My SD card just dissapered and had to do a Soft Reset to get it back........................
DAMM i'm getting tired of constantly having to reset it to use SD :twisted:
Rejoice - My SD_Card has come back
My 1 Gig SD Card is now recognized by ALL my programs. I'm not sure which changes caused it to come back, but here's what I remember I did.
1. I found a zero length file on the device called ignore_my_docs & I copied it to the root directory on my SD_Card.
2. I remapped my SD_Card & renamed it in Pocket Mechanic (Storage Folders - view & configure the storage card mount folders name)
and
3. I installed & uninstalled MVP movie player & "voila" everything was fixed.
You might think step 2 was the answer but I checked after this and the card still wasn't recognized. I have noticed that another 4k file has appeared in the SD Card root directory simply named dummy. I don't know if my PPC is trying to tell me something.
I'm guessing what actually fixed it is that the movie player had a playlist generator & I'm thinking that fixed the problem of the device finding the card, but your guess is as good as mine.
I'd certainly be interested in peoples view and if what I've done works on anyone elses PPC.
PS. Tried to FTP both v small files but FTP keeps rejecting :-(
I remapped my SD_Card & renamed it in Pocket Mechanic (Storage Folders - view & configure the storage card mount folders name)
Click to expand...
Click to collapse
What do you mean "remapped" the SD card, simply rename the moint point in pocket mechanic?
I'm sure I've tried renaming the moint point but pocket mechanic doesn't even recognise my Sd storage card. I'll play around some more
ANOTHER UPDATE
A colleague at work had the same problem. We transfered a powerpoint presentation to his storage card (1gig SD Card) and when we loaded ClearVue PPT viewer on O2 XDA IIs it didn't list in all folders.
I created a folder on the storage card called My Powerpoint and beamed "dummy" & "ignore_my_docs" to him we tried to transfer both to the root directory on his device, but it reported that "ignore_my _docs" already existed. I think it might be a hidden file.
So after transferring dummy into the root directory we reloaded ClearVue PPT viewer and My Powerpoint appeared in the All Folders list. We selected it and there was the presentation.
It works for me......
Hmmmm...
Well my problem has got worse...
I bought a new 1Gb MMC card since I thought my machine was not reading SD cards and it doesn't work!!!!!. My 128Mb card is fine, but I've reformatted the new card, sowrn at it, pleaded with it etc, but pocket mechanic doesn't even see it.
So I can not read any SD cards and only one of my two MMC cards, but all the cards read fine in my PC
GRRRR!!!!! :evil: :evil:
anybody got any ideas?
weasel said:
Hmmmm...
Well my problem has got worse...
I bought a new 1Gb MMC card since I thought my machine was not reading SD cards and it doesn't work!!!!!. My 128Mb card is fine, but I've reformatted the new card, sowrn at it, pleaded with it etc, but pocket mechanic doesn't even see it.
So I can not read any SD cards and only one of my two MMC cards, but all the cards read fine in my PC
GRRRR!!!!! :evil: :evil:
anybody got any ideas?
Click to expand...
Click to collapse
You may have already sorted this but...
I had exactly the same problem with my 1GB PNY SD card it read fine in my pc but not in my mda. I compared it to my old 256 MMC and noticed the card was a bit warped and the bit where the metal contacts are was a bit thinner. So (I know this sounds drastic :? ) I bent the card slightly :shock: (not too much pressure) which made all the contacts touch the relevent bits in the slot and it's worked ok since.
Hope this helps
I'll try anything - which way did you bend it? I presume convex with the connectors on the outside radius
Thanks
Chris
yes that was the way... But just try it both ways and stick it in.. Not too much though, just till you feel a bit of resistance.

mini usb and micro sd card slot problem...need help plz

First time poster here. I've owned my htc excalibur for a 1.5 years now running WM6 Kavana (got instructions off of youtube). for about 6 months now, my micro sd card slot hasn't been working. I tried using other micro sd cards and still nothing. My card works perfectly fine when I put it into my laptop too.
The second problem is that when I connect my excalibur to my computer, I don't get access to it like another drive so I can't get my pictures off of it or load on new music or docs. I have windows vista on my computer (unfortunately).
Thanks for any and all help!!
Wow this is weird. I have none of the problems you face.. I don't get how the Micro SD card isn't working. I actually bought a new 2GB card on thursday, and it works just fine. Don't know if this helps, but I'm running the Rose rom, and I'm also using Windows 7 beta. Do you think your problem is related to your computer's/phone's settings? I think you have to enable Advanced network functionality. Again, I have no issues..
i used to get both of those screen's too but for some reason now it wont recognize the phone is attached. i can still charge it by attaching it to my computer but no drive recognition. can you explain the advanced network functionality please?
djkidd said:
i used to get both of those screen's too but for some reason now it wont recognize the phone is attached. i can still charge it by attaching it to my computer but no drive recognition. can you explain the advanced network functionality please?
Click to expand...
Click to collapse
On your phone, head off to Start>Settings>Connections>USB to PC>Check enable advanced network functionality. If that doesn't work, I don't know what will.

16 GB micro SD card causing file explorer to crawl

i have a SanDisk 16gb micro SD card and recently it has been making file explorer crawl and crash when im trying to navigate my data. i tried using total commander to access the memory card hoping that it was just file explorer giving me a hard time and it is doing almost the same thing in total commander (it is slightly more manageable in total commander) this did not start happening untill a few weeks ago. is there a chance that a corrupted file would be causing this issue or possibly i just have the card too full up? (its not at capacity yet but it is about 1 gig away)
is anybody else having this problem or does anyone have some insight for me? any help is much appreciated.
Chances are it's only a Class 2 card. Those are extremely sllllllooooooowwwww.
rusreid said:
Chances are it's only a Class 2 card. Those are extremely sllllllooooooowwwww.
Click to expand...
Click to collapse
correct, it is class 2, but it used to be no problem whatsoever untill a week or so ago, anyone else got any clues?
It could be a combination of the fact that it's Class 2 and you loaded it to near capacity. I wouldn't think a corrupted file could do that, although I might be wrong. It could also just be a bad card. I've gotten a few that work fine for a couple days and then stop working completely. I would go with a higher class in the future (or a lower capacity Class 2 card).
Perform a CheckDisk/Scandisk(equivalent for your OS) on the card either via a Card Reader w/ an adapter, or connecting your phone to your PC in Disk Mode. Kind of fishy that it would happen all of a sudden. Flash media doesn't have noticeable file fragmentation issues.
You could also back up everything you have on the card, reformat the card, and reload everything back to it.
Hopefully this may help.
thanks for your responses, i will definately buy a higher class card in the future. how exactly do i perform that scan on my card though? i have an sd adapter so i can plug it directly into my computer. i use vista for my OS
sm0k3ydaband1t said:
thanks for your responses, i will definately buy a higher class card in the future. how exactly do i perform that scan on my card though? i have an sd adapter so i can plug it directly into my computer. i use vista for my OS
Click to expand...
Click to collapse
Plug the card into the adapter, and in file explorer on your PC, right-click on the drive that is the SD card. Choose "properties", then the "tools" tab. There you will see the option to "check this drive for errors"
And for future reference, this is the same procedure you would use to do a "chkdsk" on any drive connected to your pc. It will check for signs of defects to the physical media.

[Q] Galaxy 10.1 USB connection kit problem, USB sticks

I've got an GT-P7500, and it will not read any USB Sticks.
Using the Samsung connection kit.
tried with 15 different USB sticks, all FAT32 formatted, all sizes 1-16gb.
A friend uses a 4gb stick in a GT-P7510, i tested that one, didn't work
Other things like usb mouse works, but not usb stick.
Anyone got any suggestions ?
Wonder if there is something wrong with it.
How do you know it isn't working? What directory are you looking at? What does the notification bar show? Which connector are you using? Is USB debugging on?
Also this is more a Q/A...
I'm hoping this thread is still alive because I am having the same problem. @ajnindlo I'm using the standard Samsung USB Connector with a 8gb usb stick. I've tried with USB Debugging on & off and I get the same message. "Damaged USB" and asked me to reformat.
I am using a Mac BUT I did format the stick as a ms-dos fat format.
Please help...
Thank you
PS. I know this is more of a q&a place, didn't know where else to post and didn't find any other with this problem but here. Please redirect to correct location if you know of a solution. Thank you
Just i hace received my USB kit and it works perfectly, my USB has 16 g and i haven't do anything to work, conected and work.
Sent from my GT-P7510 using xda premium
I had a 32 GB sd card and it also wouldn't be detected by my Galaxy Tab. But, I plugged it into my phone, plugged my phone into the computer, formatted the sd card and when I put in my Gtab, it worked.
I got my connection kit today but its not working at all.
Got 2 adaptors 1 for sd card and 1 for usb connection they both dont work.
Got no status bar message or anything.
Do I miss something here?
Sent from my GT-P7500 using xda premium
one catch that I have realized is that for proper identification of the USB Stick, the tablet must be in english language.
My friend had a hard time figuring out why his tablet won't show up any notification when a USB Stick was connected, whereas mine shows the "My Files" app showing the storage folder and all the contents of the stick, joking around I told him that was because my tablet was in english and his tablet was not.
Anyway, Astro file explorer doesn't work with USB Sticks, Use ES File Explorer instead and look in /mnt/ folder for usbdrive , there should be your content.
Nope still not working. No files found.
Feels like my device doesnt support usb host.
Is that possible?
Sent from my GT-P7500 using xda premium
brieuwers said:
Nope still not working. No files found.
Feels like my device doesnt support usb host.
Is that possible?
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
Connect the usb stick, open ES File explorer and go to /mnt/usbdrive folder, if you can't find the folder (which is not on the sdcard) you need to configure ES File explorer to get out of the sdcard directory, the usbdrive folder is always present even if you don't have any usb drive connected
I had similiar problems with my 16GB P7510. It would only recognize any of my Sandisk sticks and a brand new PNY only at 30% of the time. The only stick it was reliable with was an ancient 256MB stick I had. I worked fine with my camera.
I ended up returning it for a 32GB P7510 and have not had any problems with any of the sticks. At the time I didn't think the tablet was defective but it appears it was.
Sent from my GT-P7510 using Tapatalk
Solution ???
drummerweed said:
I'm hoping this thread is still alive because I am having the same problem. @ajnindlo I'm using the standard Samsung USB Connector with a 8gb usb stick. I've tried with USB Debugging on & off and I get the same message. "Damaged USB" and asked me to reformat.
I am using a Mac BUT I did format the stick as a ms-dos fat format.
Please help...
Thank you
PS. I know this is more of a q&a place, didn't know where else to post and didn't find any other with this problem but here. Please redirect to correct location if you know of a solution. Thank you
Click to expand...
Click to collapse
I have exact the same issue, but it's strange, some SD has this issue, some don't.
"Damaged USB"
I found a trick, but it solved my problem only once: format SD card by a digital camera (Canon powershot) , SD was now recognized by Tab10.1
Putting some extra files on it by PC ... insert SD to Tab10.1 ... same issue again :crying:
Have tried several SD formats & sizes ... notting helps
Did someone knows a solution to solve this problem
GT-P7510
Android 3.2
Rooted, TASK 14 Rom
Try to reboot, it worked for me.
bar_rodoy said:
Try to reboot, it worked for me.
Click to expand...
Click to collapse
Correct ... but after a second or third time connecting same SD , issue returns
Have tried this, waiting for a while does helps time to time ... so I guess it's maybe "memory" or "kernel" (system) related.
It seems we have the same TASK14 ROM + Pershoot's kernel.
Strange things.
I made the test by unroot my device and went back to factory stock ... it look like the issue is solved for 90% ... it appears when you disconnect and reconnect to fast after the 1st disconnection .
usb not recognised
Nothing happens when i plug (several) usb sticks. /mnt/usbdrive is empty.
Any idea?
charging Problem
You must Check that Your usb Debugging is On or Not as it creates problems and this will be stopping You device from Accepting Usb Sticks..
I found that FAT 'sdCard's would mount , but that NONE of my NTFS sticks would mount
All my sticks are NTFS , so that was unacceptable.
rooted 7500 and 6800
Installed 'Paragon NTFS&FHS', from the AndroidMarket and all files now popup in 'MyFiles' when I insert the usb with the adaptor
I have the Samsung Connection Kit containing as USB and a SD adapter. The USB adapter works fine, but the SD adapter doesn't work at all. All it does is starting the TuneIn Radio app when it is connected. I uninstalled the app and now connecting the adapter has no effect at all. Any suggestions?

[Q] WiFi issues with Sd-HC-card

Hello,
I have a weird problem. Today I inserted my new Samsung microo SDHC card 16Gb into my iconia a101. Now I have the problem, that I am not able to connect to my Wifi, when the card is inserted. When I remove the card I do not have any connection problems at all. Maybe anyone has a solution to this.
thanks in advance and kind regards Akku
That's strange. Here's a possibility... maybe the antenna connector popped loose and is making intermittant contact. I know that the antenna connects relatively close to the SD card slot, so it's possible that it loses contact when a card it inserted. In the link below, aznmade disassembled his A100 due to a wifi problem, so you might want to follow his walk-through to see if something's loose.
http://forum.xda-developers.com/showthread.php?t=1368446
Thanks for your quick answer,
but that's most probably not the problem. When I remove the card, connect to my router and then reinsert the card, the connection stays stable. I also tried other sd cards, but all showed the same behaviour except one. The card I am able to use is a faked china 8gb sd card. Faked means that it is a 2gb sd card, but shows as an 8gb. That means if you write more than 2gb data to it you will override existing data.
regards Akku
Have you tried reformatting it with fat32?
Sent from my MB860 using XDA App
Sure. The card itself is recognized by the tablet and R/w is possible. But the wifi refuese to connect when the sd card is inserted.
It seems to be a general problem - if you look for reviews on amazon, some buyers have the same problem... very strange...
According to the Acer Support with the update to 2.004.02 (A101) the issue should be resolved... any feedback on this?
Change the channel!!!
I had the same problem. I was on the road for a couple of weeks and purchased a PNY SDHC 8g for my a100. Didn't have a problem until I walk in the door at home. Then wi-fi started connecting and disconnecting. I fired up the hotspot on my Razr and bingo the a100 liked that much better than my net gear router. So I compared the configuration of my Razr to the Netgear Router and found that the router was set to auto channel. I changed the channel to 1 and a100 connected and was very happy. I am sure there is issue with the addition of the SD Card installed but it certainly isn't a hardware issue so keep the tools in the tool box and try checking the router config.
What another forum found was that it depends on the type of SD card - I have a Trancend SD - no problems - the same tablet with Sandisk SD - no connection... whatever that means

Categories

Resources