How do youi nstall CAB FILES on a IMATE PDA2K? I am using windows XP 2nd edition & I tried following IMates instructions but they do not install. There must be a correct way to install them. Thanks for any info.
copy the file from your computer to the imate, then navigate to the file on your imate and click on it.
I did that but it still does not install.
(Assuming on XP)
Start ActiveSync connection up
Goto to "My Computer" on PC
Browse to Storage Card (if you have one)
Browse to Storage (if you don't have storage card)
Copy the CAB Patch file there.
Now on PDA2K bring up File Explorer
Browse to My Device (drop down box at top)
Now Browse to Storage Card (or Storage)
You should see the file you copied.
Click on it.
Reboot manually (soft reset with Stylus) if it does not automatically.
Related
Hello,
I would like to know how can I extract the .cab files from an exe file that is an application installer (the exe should be run on the PC).
I think that the active sync saves a copy of the cab files, but I am not sure. If using activesync is the only way, it's fine, but I prefer a method that does not install the software first and it does not involve activesync.
Thank you,
Eran
Well it really depends on the application, there is not always one answer that fits all things.
You can try using a program like WinRAR and right click on the PC exe, you may see an option to extract the files, if you do chances are you'll gain access to the cab files. Things like the ROM updates work this way.
Sometimes this method doesn't work. Then you may need to install the program on your PC. You'll need to look on your C drive for the folder the program creates, generally this will be with in the C:\Program Files\ folder or the C:\Program Files\Microsoft Activesync\ folder. This folder can be easy or hard to find.
Another method is to set Pocket File explorer to "Show all files" (you'll need to tap and hold on the white space at the bottom of the page, and select this option from the menu that pops up.) Then go to \My Device\Windows\AppMgr\Install\ and wait for the file to appear here when you first install it. Note that in WM5 you are generally asked if you wish to install the program, DO NOT ANSWER THIS QUESTION instead go to pocket file explorer and look at the \My Device\Windows\AppMgr\Install\ folder your cab should be here, after it is installed it will be deleted from this folder and some times cabs are partly deleted in the install process. (it maybe necessary to install two or more programs at the same time to get a working copy of your program cab file.
DAH
Im pretty new here and just got my BA not tooo long ago...I used to be a trreo user now im hooked on my BA.
I see alot of software that comes in a form of a cab file...does anyone know how I can load that software on my BA? thanks alot!
hey mate and welcome!
if you put the cab file in your pc folder; you'll see that the description is "zip file"....that's because it's the only format microsoft recognizes...in a way its also true as the cab file is a compiled program ready for installation. what you do is DON'T unzip the file in your pc; rather cut/copy and paste it directly in your ba (via activesync or in your sd card). put it in a folder that's easy to find; say "my documents...personal" (or you can make your own folder to put in cab files). use your ba's file explorer and go to the folder...from there double click (via stylus) on the cab file and it will automatically install itself. btw, if you copied the cab file in your sd card you can also execute the installation there....no need to paste it in your my documents area.
if you're using wm2005; upon execution the unit will ask you if you want to install it in the sd card or internal memory....that's really up to you depending on the size of the file you're installing.
hope that helps
rob
thanks alot Robson.
Ive always looked past cab file programs b/c i couldnt install it. I hope this thread helps other newbies too. I searched and couldnt find an answer.
is there anyway that can install cab files direct from pc to ppc?
sorry for the late response; was in china for a week.
unfortunately, no. i don't think there's a way to install cab files via pc. if you do unzip a cab file; you'll notice that the files are something like:
0000124
009890
or something like that....can be as many as 20 lines of code...but scanning through the entire zip will not give you any .exe files which can be executed via pc. if you have a card reader installed on your laptop, simply copy and paste the cab file on your sd and from there install via your ppc
hope that helps
rob
Hi, I've read somewhere in the forum that is possible to use the ExtRom Autorun application to install the cabs you want after a Hard reset.
I have a question regarding that issue. Is it possible to change the config.txt file in a way that you can silently install apps not only on the main memory but also onto the Storage Card?
What I'm looking for is an autoinstaller of some kind...
Thanks in advance.
Sorry for my bad English!
...Anyone?
Hi
You can use WinCE Cab Manager to edit your cab files and change the Default Install Dir.
Open the cab you want to edit and then in Default Install Dir make a new folder named Storage Card (if you want to install on Storage Card). In Storage Card folder create the subfolder for your cab app then save.
You can also create a especific folder or shortcut to be created on start menu of your pocket pc.
Then you just copy all your edited cabs to ExtROM and when you hard reset your pocket they will be installed on Storage Card.
coxrui said:
Hi
You can use WinCE Cab Manager to edit your cab files and change the Default Install Dir.
Open the cab you want to edit and then in Default Install Dir make a new folder named Storage Card (if you want to install on Storage Card). In Storage Card folder create the subfolder for your cab app then save.
You can also create a especific folder or shortcut to be created on start menu of your pocket pc.
Then you just copy all your edited cabs to ExtROM and when you hard reset your pocket they will be installed on Storage Card.
Click to expand...
Click to collapse
Will try that, thanks!
------------------------
Obrigado pela ajuda, vou testar e depois digo como correu!
i tried that, but, i still have a question: with wince cab manager, if I'm doing that @coxrui the application is still asking for the location of the cab installation. how can i install it directly to storage card without asking?
P.S. solved: you have to use hard-code paths to storage card.
hello guys! do you have any idea on how to run .exe/.msi files using an sd card? i cant synchronize my ba for the reason that i still dont have a usb cable for it. i do update my ba using cab files only.
i have many useful utilities but some of them are in exe format. how will i be able to run these files on my sd card?
AFAIK msi files are exclusively for the pc, if a mobile app is provided as a msi file, it needs to be installed through activesync or wmdc.
exe files are executables for windows pcs and windows phones, but if a program comes in a single exe file, it looks like a pc setup as well. but you can try copying it to the sd card and simply click it in the file explorer. if you get an error message, it is a pc program.
what you can do, is install activesync or wmdc (depending on your desktop os) on your pc and install the apps you want, on your pc. normally that would install them, the next time you connect to your cradle/cable. since you don't have one, you should track down the cab files. on windows 7 they are located somewhere in c:\windows\windowsmobile\. i believe on xp it would be program files\active sync\
usually those installer routines extract a cab file in one of those paths and copy it to the device to be installed then.
also, if you don't have the possibility to sync, you should make regular backups of your pim data, best done with:
dotFred's PimBackup V2.8 for WM5 and above Download (Mirror)
thanks sir. that would probably help me installing those exe files.
i really have a hard time maintaining ang pimping my ba without the usb cable. still waiting for my cable to arrive here.
but then again, thank you for the information you have shared with me sir..
How can I edit my cabs to change their default installation folder to SD/program files, for example, instead of their default installation folder which is usually somewhere on the device memory ?
I have got an app on my PC called WinCE Cab Manager. I used it to edit a cab file, changed the installation folder to \StorageCard\program files......but what it did was created a folder & subfolder on the device memory & named them StorageCard\program files
yassero said:
How can I edit my cabs to change their default installation folder to SD/program files, for example, instead of their default installation folder which is usually somewhere on the device memory ?
I have got an app on my PC called WinCE Cab Manager. I used it to edit a cab file, changed the installation folder to \StorageCard\program files......but what it did was created a folder & subfolder on the device memory & named them StorageCard\program files
Click to expand...
Click to collapse
Should it not be "Storage Card" - with a space?
go in the CAB information properties,
edit installation directory,
add folder "Storage card" on root
add program files there or whatever.
for files then keep "install dir"
-
remember that installing on sd is not standard install.
papo said:
go in the CAB information properties,
edit installation directory,
add folder "Storage card" on root
add program files there or whatever.
for files then keep "install dir"
-
remember that installing on sd is not standard install.
Click to expand...
Click to collapse
Yes. I did that & the result was that it has created a folder on the device memory called Storage Card & installed the app in a subfolder in that folder.
It neglected the physical Storage Card completely. My objective is to change the default install dir of all my cabs so when I use XDA_UC, it automatically install them to the SD Card. What XDA_UC currently does is semi-auto install whatever I put in XDA_UC/SD, meaning that it runs the installer & asks me to select where to install the app.
oh.. And other thing is, if your card is not plugged in/initialized when UC will start, it may just create a folder Storage Card and then initialize SD as "Storage Card2" ... happened to me pretty messy.
You can make cabs which don't ask to ask:
wceload.exe "%1" /askdest
but there is no param. for default=SD
http://forum.xda-developers.com/showpost.php?p=5090353&postcount=74
I reckon you need a wceload.exe replacement, or to make a mortscript to click on SD option every time for you.
Anyway advice on that link above, that SD apps usually don't need re-installing is right too
Other option would be forgot the cab. make a zip file of all files and reg file and use mortscript to import them.
papo said:
oh.. And other thing is, if your card is not plugged in/initialized when UC will start, it may just create a folder Storage Card and then initialize SD as "Storage Card2" ... happened to me pretty messy.
You can make cabs which don't ask to ask:
wceload.exe "%1" /askdest
but there is no param. for default=SD
http://forum.xda-developers.com/showpost.php?p=5090353&postcount=74
I reckon you need a wceload.exe replacement, or to make a mortscript to click on SD option every time for you.
Anyway advice on that link above, that SD apps usually don't need re-installing is right too
Other option would be forgot the cab. make a zip file of all files and reg file and use mortscript to import them.
Click to expand...
Click to collapse
It is easy to zip all my cabs in one zip file. How do I create a reg file & how do I import them with mortscript & what do I do after importing them ?
yassero said:
It is easy to zip all my cabs in one zip file. How do I create a reg file & how do I import them with mortscript & what do I do after importing them ?
Click to expand...
Click to collapse
you got it wrongly, the last option was not using CAB at all.
I don't know what you are trying to do. Hard to guess. Why would you want to install on SD on the first place?
In my case, I am placing maps and files which programs can only use from SD, I have them in zip and unzipping with 7zip which accepts plenty of arguments.
You know that CAB is something like zip. You don't need to use CAB and can have the same results. And if you creating those cab yourself, why not just create zips. And you have it compressed better too.
- what is reg? file containing registry entries. if you don't have any you don't need that.
- nothing to do after
- for files:
you place all files in folders in this zip file, starting with "Storage Card"
this will check SD card, if it's present and then unzip file "file.zip"
I have this file and 7zG.exe files in ROM-windows folder, but you can change that below.
for this script to run you need mortscript.exe and 7zip programs, they are free
==
SetMessageFont(17, "Tahoma" )
While( not DirExists("\Storage Card"))
SleepMessage( 99, "Insert SD card", "SD card missing", false, DirExists("\Storage Card"))
EndWhile
RunWait("\windows\7zG.exe"," x \windows\file.zip -y")
I am not that knowledgeable technically. I do not not create Cabs. All I am trying to do is figure out a way to have the cabs I have installed silently on the SD after I flash any new ROM. I place all my cabs on Storage Card in folder XDA_UC/SD. This is not a silent installation. It needs user intervention as on each cab installation, it prompts me to select where to install to (device or SD Card). I am very humble when it comes to reg files & stuff like that. I do not know how to write them or how to use them afterwards.
I have always wanted my settings saved aswell to be applied on the next ROM installation. Thanks to NRG, his ROMs come with Settings Export app that simplifies things but exporting all settings to Storage Card in folder XDA_UC & accordingly it is applied at new ROM installation.
why do you want to install to SD card?
What pda you have? Are you low on internal memory?
I only put an app on SD if I had less then 5MB internal free.
You should use your internal memory for programs as it's faster and better protected against lost clusters and unfinished writes.
And to use SD for personal data, as pictures, mp3 as it's easier to make backup of it and access speed doesn't matter there so much.
There is no reason keeping more then 5MB free of internal memory.
A time ago I put update of opera on SD, once when it crashed, it damaged file structures and I lost half of my data on SD.
You can have silent installs to internal memory.
-
Other thing is, as someone wrote before, for most of the apps you don't need to install again on SD card if they are still there. Before you reflash, backup
folder \windows\Start Menu and after reflash, copy it back.