Pairing issues with the Sony HBH-200 Bluetooth headset - General Accessories

I seem to be having constant issues with keeping the device paired. As far as the PDA2K is concerned it says the device is still linked. However, incoming calls will not ring on it or show the caller id. The device when powered on says the connection fails.
After doing a master reset on the HBH-200 and then repairing the device with the PDA2k I get it to work just once.
Anybody know any tricks here? Otherwise, I am going to return it.

Related

ALPINE Bluetooth handsfree profile only activates AFTER a call

Hi All
There is plenty of helpful bluetooth hands free advice in FAQs & searching the forums but nothing specifically for my problem:
My Alpine will pair correctly with bluetooth hands free devices (tried a few) but calls are not transferred to the bluetooth device until AFTER a call has been initiated. To ensure I can make or receive calls via the bluetooth device, I have to firstly make a call. The call doesn't even need to connect - I only need to start & end a call straight away to make the hands free profile active.
This means I need to fiddle about with the 'phone to activate the profile before I can drive off.
The bluetooth hands free devices work fine with other 'phones and the Alpine shows the same problem with whichever hands free devices I try.
Does anyone have any advice about how to ensure the hands free profile gets activated on the Alpine as soon as the bluetooth device connects?
Any advice would be appreciated. Thanks.

Bluetooth drops incoming call!! :(

Hey guys,
i was wondering if anyone was facing this problem... i have the Alpine 103BT in my car which has an inbuilt parrot bluetooth system. I have noticed that when someone calls me it shows up on the lcd on the headunit then immediately drops the call! it shows up as a missed call on my tp2... but when i call using this bluetooth system then it works like a charm!
Any idea what i can do to change this? Is there a setting i have inadvertently changed?
I would really appreciate this because this call dropping really defeats the point of hands free!
Elfangor
I've got the same problem.
Just look a few posts down the list and you'll notice my 'cry for help'.
So far though, nobody's come to the rescue.
I've been reading that our phones have a unique BT-implementation, so it could be down to a bug in that area. If more people show up having similar issue, we might know.
Until then: fingers crossed and hope for sombody to post a solution.
Great! its not just me then! I hope it gets sorted! it gets on your nerves after awhile!
That's putting it mildly.
This sucks big-time: when on a business-call you definitely don't want your headset to die in you. During any conversation, really, but blasting along the motorway it's the last thing you need.
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Your symptoms sound a bit different from ours so it could be a totally different problem.
We might need to be paitient until one of the experts has a simiral experience and dived into the software.
Until then, I'm baffled.
eidikos said:
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Click to expand...
Click to collapse
Come to think of it... i have a similar problem.. when i get an incoming call it stops the music and registers a call and just a few second later..i get the --------------, and then the music comes back...by the time i fish my phone out of the pocket ive got a missed call! havnt noticed any problems when im calling though.
i tried repairing the phone to the unit but same thing! not sure what else i could do
Similar problem (I think)
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
I've got exactly the same problem as the original poster. Mine's a vodafone TP2 with the standard vodafone rom. I've got the Alpine 104BTi. I can make outgoing calls ok but as has been described any incoming call will show the caller ID for about 1 ring and then it hangs up the call.
I've got a Jabra BT500 which works perfectly. I am wondering whether it may be the actual firmware in the Alpine device. If you look at the phone compatibility list on the Alpine website the TP2 is not listed. It worked fine with my Kaiser and this is listed as compatible.
I emailed their tech support and they said they are waiting for their customized version of the firmware from Parrot to be updated, possibly around September. I've noticed that for the Parrot standalone devices these all list the TouchPro2 as compatible, so maybe this will be fixed.
They did mention that the firmware update may only be available through the dealers. I'll keep an eye on their website. My current firmware version is 320.
I've read some other threads somewhere that people with the vodafone rom describe having problems with bluetooth that are fixed after flashing with a different rom so may turn out to be that.
Infuriating though.
It seems to be the poor implementation of the new BT stack
I have had similar problems to those described above, my Peugeot van has inbuilt BT (uses Parrot in implementation) which just misbehaves unbelievably including hanging up the current call if a new one comes in on call waiting, phonebook access is rediculously slow and buggy.
My Jabra BT8010 disconnects at random
My Jawbone disconnects very occasionally
The stack is full of bugs and HTC must know it - I reported it on their support system and firstly fobbed off, then they said they would look into it, then the log was auto closed - very convenient way to show they are meeting targets in resolving issues.
It is poor, poor and more poor. The new WIDCOMM stack looks great but doesnt really work.
Very poor for a flagship handset and they should sort something out
I went to an Alpine delearship who suggested what ukdoc was trying to do.. basically firmware update! Are you using a different Alpine website? Because the one i go to says coming soon on the page where software updates are supposed to be. I culdnt find any connection with parrot and alpine on the parrot website!
Basically what im asking is how are you going to be getting the firmware update and could you direct me towards it!
Many thanks Mate
Elfangor
rlsxda said:
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
Click to expand...
Click to collapse
FYI, I just upgraded the radio to "4.46.25.24 - HTC" (see http://forum.xda-developers.com/showthread.php?t=549939) and the handsfree seems better...not sure it's perfect, but it does answer and hangup now...
Upgrade Alpine CDE-104BTi firmware from 320 to 360
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
dsalter said:
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
Click to expand...
Click to collapse
I've just done likewise, and can also receive incoming calls at last!
Hi
I just tried updating the BT in my Alpine 104bti. The laptop connects to the headunit but the update tool don't find the connection, I've tried disabling the antivirus etc. But it don't see the connection but the connection is displayed on the laptop.
Any Ideas whats wrong ?
Cheers Gomez...
SOLVED
Tried again using a laptop with Xp on worked first time, Seems Windows 7 was causing issues.

[Q] Car bluetooth and Desire - Fatal exception

Dear all,
My HTC Desire is now 15 months old, and still works as new. No, better than new since it's rooted and faster.
Coming to the problems:
My car has a bluetooth feature to stream music from the phone, and to take and make calls. Bluetooth music streaming works perfectly, and I can skip songs using the car controls.
I am facing the following issues with the "Phone Connect" feature when I pair the Desire:
After any and every incoming or outgoing call is completed, I get a pop up on the screen which says "Fatal Exception..." and I can only force close from here. When I force close, the signal strength icon shows a cross and all connectivity is lost for sometime, including BT: car says "phone disconnected". After a while the signal strength comes back and BT can be reconnected.
So basically I have to repeat this process everytime I make or answer a call via the car BT feature. Needless to say, it's a PITA.
I am guessing this is a problem to do with the radio or kernel of the phone. Not sure which. Please confirm this, and guide me to a radio or kernel file which may solve this issue.
My second problem has to do with the phonebook feature of the car. It can pull the contacts, the recently dialled numbers, recently received numbers, and missed calls. Only in the Desire it doesn't.
The phonebook feature can only see the contacts in the SIM card.
The recently dialled, received, and missed calls don't work. Numbers only show up on the car list if I have made/answered/missed a call while connected to the car BT.
The only feature that works as it should is redial.
As I am told, all Nokia models work perfectly on the same car model, and since we own a 'smart'phone, not to mention an Android, we should be able to get it to work however we want it to.
Any fixes for this one?
Thanks in advance.
PS. If you want the exact error message thrown by the phone after taking/making a call, I can write it down and get back to you afterwards.
BUMP!
Please help, guys!

[Q] Sony xperia m parrot bluetooth pairing problem

Any advice?
Parrot Mki9100 hands free bluetooth system fitted in car and in good working order.
Have successfully paired new phone (Xperia M) with device.
However, Parrot screen states 'phonebook busy, please wait' continuously.
Have updated Parrot system software without success and factory re-booted this device.
Have tried allowing and denying access to phonebook, headphone etc. on phone but no difference.
Kit is paired with other phones without same problem.
Have emailed Parrot who states that it's a problem with phone.
I can use the phone but unable to use voice recognition system, i have to use manual 'jog' wheel and buttons to navigate through phonebook to get to correct contact.
Also, phone does not automatically connect when i start the car, i have to manually do this via the phone.
Any ideas on any settings or patches i can install on phone?
I am happy that its a problem with this make/model of phone as other are and can be paired easily.
any help much appreciated.
Mike
I occasionally fit these exact kits myself in my line of work (mechanic) and I've had no issues with them as I use my phone to test them out. Have you got auto connect setup on phone? Also the memory of the phone book on these kits is not large same with paired phones so it might not be able to get contacts due to lack of internal memory in the kit. Have you done a hard reset of the kit? Next one I get ill test and pm you my results and any tips I find
Sent from my C1905 using xda premium
I have a Parrot ck3000 and it does pair well with my M ss routed. The problem is that in a call (either outgoing or incoming) the communication is not stable: after a few minutes the bluetooth communication drops.
I've also used a number of apps such as MonoBluetooth, BTHeadSet, BTmono etc. without any result. Wifi, HFC and Stamina mode are not the cause. I'm about to give up !!!

Question Bluetooth Pairing failed

I'm currently trying to pair my SmartWatch and navigation device with the vivo. With the SmartWatch, Coros Vertix 2, it worked straight away.
With the Hammerhead karoo 2, however, the vivo is desperately trying to establish a connection.
Pairing works, the number code came up briefly at first, but it doesn't appear in the app, not even under the available devices in the BT settings.
Tried lots of tips, removing all paired devices and then restarting, activating/deactivating BT, restarting the navigation device etc..
Nix.
Anyone with an idea what the problem could be?
Solved the Problem with the Help of the customer Service of Hammerhead
Hard Reset of the Karoo and new Pairing wihthin Seconds.

Categories

Resources