RIL.DLL - MDA III, XDA III, PDA2k, 9090 General

Please is it possible to extract ril.dll itself from Blue Angel?
I am fighting with it so long, and no luck.
Please any suggestions are welcome
[email protected]
Max

maxrfon said:
Please is it possible to extract ril.dll itself from Blue Angel?
I am fighting with it so long, and no luck.
Please any suggestions are welcome
[email protected]
Max
Click to expand...
Click to collapse
This DLL can be extracted using dumprom tool. But it is XIP, so it would not work after extraction and it would be rather difficult to analyze it with IDA.
You may look in extended ROM CABs, for XDA2 an updated version of this DLL was often located in extended ROM.

mamaich said:
This DLL can be extracted using dumprom tool. But it is XIP, so it would not work after extraction and it would be rather difficult to analyze it with IDA.
You may look in extended ROM CABs, for XDA2 an updated version of this DLL was often located in extended ROM.
Click to expand...
Click to collapse
i want ril.dll also,can you tell me how can i get it ? thank you......

Related

problem during cooking lvsw 0320

i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
zohaer21 said:
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
Click to expand...
Click to collapse
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
dont know if this would help you but take a lot here :
www.asukal.jp/hv_rom/hive2.txt
or simply use Make_HV, found it in the development & hacking thread.
First covert the hv file to rgu (which is simply REGEDIT4 Format) then make changes and convert it back.
qooqoo said:
i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
Click to expand...
Click to collapse
This is my little surprise
qooqoo said:
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
Click to expand...
Click to collapse
You don't need a .cab for this. The program that goes through Config.txt can handle XML files with registry settings directly. So, grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want. If I'm not mistaken, it's even available bundled with a Chinese ROM already. There you can edit the .rgu files from which the Registry will be created. This eliminates the need to read any of the .hv files. Worked very well for me! Also, since bepe's kitchen recreates the packet structure of the ROM, it's so much easier to understand which files and registry entries have a dependency or belong together. Highly recommended!
Cheers
Daniel
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
weird suprise
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
Why would that be a surprise? Is there more to this than meets the eye?
dutty said:
weird suprise
Click to expand...
Click to collapse
Indeed, I've been hitting my head against it for some days now...
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
himan,give us a solution plz, it is a so good rom, but i can't add anything i want.
tadzio said:
grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
Click to expand...
Click to collapse
thk u but i don't know how to edit a xml file, any suggestion?
tadzio said:
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want.
Click to expand...
Click to collapse
it is for CHT but not for CHS, there is a lot of CHT roms yet, cooked or offcial, but there isn't a official rom in CHS, a just want to convert 0320 vesion to CHS vesion.
I will be watching this thread.
Waiting for good news.
qooqoo said:
i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
Click to expand...
Click to collapse
I have the same problem...the LVSW 0313 version was fine...then the new LVSW 0320 won't boot..stopped at the subsplash screen...it is strange that the default.hv is there but doesn't seem to booting the file.
qooqoo said:
thk u but i don't know how to edit a xml file, any suggestion?
Click to expand...
Click to collapse
Any Unicode-capable editor will do. Personally, I use UltraEdit.
Cheers
Daniel
Please don't take offense, but I'm starting to think you got the ROM as it is..."protected" that's why all the customizations are done via AutoRun.exe and xml files.
i found that lvsw 0325 edition can be edit.
qooqoo said:
i found that lvsw 0325 edition can be edit.
Click to expand...
Click to collapse
Yes, 0320 can't be edited. But 0325 could. But you can't use the regular tools..you have to use the "more Storage" tool, then just manually copy the "default.hv" and "user.hv" from the "dump" folder, use the regular tool and covert it to .reg. Then you make modifications to the registry file, convert it back to .hv and copy them back to the "dump" folder..you can add files by just copying files into the "dump" folder..after you are all done with it, just continue with the "more storage" tool to make your new-os.nb

BETA: Extended Artemis Kitchen for WM6.1

New extended Kitchen for Artemis
ARTEMIS_DEV_v2.1_Build_19199.rar
Related:
Extended Kitchen for Trinity
Extended Kitchen for Hermes
Extended Kitchen for Herald
Thanks to misar, FreePK for helping with this new set of tools!
About the Kitchen
Artemis base: HTC P3300 WWE 3.13.405.1
OS base: VF Kaiser UK 3.08.161.0 (Build 19199)
OEM Apps removed, but you need to clean up the OEMDrivers package
I did not do any changes to the OS, because it should be a clean base Kitchen for all of you
Full XIP editing supported by the Kitchen
New tool to merge all dsm files to one big file and delete all rgu's
I think the OEM package to SYS problem should be solved... but did not try it yet
How to use it
Requires Microsoft Visual C++ 2008 Redistributable Package
OEM and SYS can be used as known
The content of ROM\XIP will be used to create a new XIP section for the OS
You don’t have to worry about relocating modules... add/remove whatever you like and the new tools will take care of relocating modules or freeing RAM
.VM and .ROM is updated automatically
Actually this Kitchen runs in auto mode, which means you only need to run BuildNB.bat to create the ROM. You can change that by editing the bat files; made it this way, because I don’t use the options in BuildOS.exe
I consider this a perfect port of the new build to this device
Replaced all XIP SYS packages (I did not just changed coredll.dll to get the new build number)
There were also boot.rgu changes my MS, those have been added too
SYS is completely untouched
Read this for download:
All donations are very welcome!
I need to buy a new device, because this time my Trinity is gone forever and I cannot use my girlfriends Artemis without being killed (by mistake I deleted all contacts last time I used it for testing... she was not very happy about that )
When you are getting money for the ROMs you cook using my kitchen, I would really appreciate a donation.
I'm not talking about 50% of you incomes, but one small donation would be fair I think.
To download the Kitchen click at "All donations are very welcome"
!!! This was only meant for ppl never donated for these tools and expecting donations for ROM's created using my Kitchen !!!
Thanks to all those who have donated already!​
Happy cooking!
bepe said:
Could someone please try this Kitchen, cos I dont have any device right now...
http://rapidshare.com/files/88860516/ARTEMIS_DEV_v2.1_Build_19199.rar
Related links:
Trinity: http://forum.xda-developers.com/showthread.php?t=364634
Hermes: http://forum.xda-developers.com/showthread.php?t=363721
Click to expand...
Click to collapse
Thanks bepe will give it a try and let you know
I'm on it too.
TNX!
bepe said:
Could someone please try this Kitchen, cos I dont have any device right now...
http://rapidshare.com/files/88860516/ARTEMIS_DEV_v2.1_Build_19199.rar
Related links:
Trinity: http://forum.xda-developers.com/showthread.php?t=364634
Hermes: http://forum.xda-developers.com/showthread.php?t=363721
Click to expand...
Click to collapse
Thanks bro
What does this Ext. ROM contains? Will it be suitable with BB5.0?
meschle said:
Thanks bepe will give it a try and let you know
Click to expand...
Click to collapse
I CONFIRM IT WORKS - MANY THANKS BEPE - I MADE THREAD A STICKY
it works here too!
EazyVG said:
What does this Ext. ROM contains? Will it be suitable with BB5.0?
Click to expand...
Click to collapse
Sorry about that... did not see that the name might be confusing...
It means that this is a ROM Kitchen with an extension to edit/build XIP sections
To edit the XIP section was no easy task until now, so this means a little revolution for porting new build to our devices.
meschle said:
I CONFIRM IT WORKS - MANY THANKS BEPE - I MADE THREAD A STICKY
Click to expand...
Click to collapse
NikMel said:
it works here too!
Click to expand...
Click to collapse
Thanks to both of you, great that it is working, happy cooking
Thanks bepe
Nice and great tools for Artemis.
thanks you so much.
dheewatara said:
Nice and great tools for Artemis.
thanks you so much.
Click to expand...
Click to collapse
P' Dhee ,Could you please make a tutorial ?.
Many thanks to Bepe for making the new toy
I tried several times building a rom using the kitchen but failed. What I did was simply put in OEM packages and build the OS, got a nb file, then used htcrt.exe to convert it to a nbh for flashing. Everything seems fine during the flash. But when it restarts it dies in the first splash screen.
Any hint for this?
mypleasure said:
I tried several times building a rom using the kitchen but failed. What I did was simply put in OEM packages and build the OS, got a nb file, then used htcrt.exe to convert it to a nbh for flashing. Everything seems fine during the flash. But when it restarts it dies in the first splash screen.
Any hint for this?
Click to expand...
Click to collapse
First try if a ROM without OEM packages is working, next you need to add one OEM package after another... I'm sure there is something wrong with one of the packages.
You are using the wrong drivers.
Do you any drivers installed??
Did you fill XIP up?
mypleasure said:
I tried several times building a rom using the kitchen but failed. What I did was simply put in OEM packages and build the OS, got a nb file, then used htcrt.exe to convert it to a nbh for flashing. Everything seems fine during the flash. But when it restarts it dies in the first splash screen.
Any hint for this?
Click to expand...
Click to collapse
Great. Will come up with some cooked stuff soon
Regards,
Carty..
Built a ROM without addidng anything but a music file to reach 50MB limit but the ROM never passes the splash screen on device. The same happens with extracting and re-building of cooked ROMs even without editing. What am I doing wrong?
But when I extract and rebuild an OEM rom, everything works fine!
Regards,
Carty..
NikMel said:
You are using the wrong drivers.
Do you any drivers installed??
Did you fill XIP up?
Click to expand...
Click to collapse
Thank Bepe and NikMel a lot for your kindly help.
Should I keep the drivers in the kitchen, or replace them with the drivers from wm6.0? And how to fill the XIP? Sorry I am a newbie to the kitchen.
Most of the ROM do not include the rgu files.
You need rgu files to make your own rom.
Carty said:
Built a ROM without addidng anything but a music file to reach 50MB limit but the ROM never passes the splash screen on device. The same happens with extracting and re-building of cooked ROMs even without editing. What am I doing wrong?
But when I extract and rebuild an OEM rom, everything works fine!
Regards,
Carty..
Click to expand...
Click to collapse
the easyst way is to copy "OEMDrivers" map from wm6.
You should copy XIP files one by one from other rom and put it in a map with the same name.
mypleasure said:
Thank Bepe and NikMel a lot for your kindly help.
Should I keep the drivers in the kitchen, or replace them with the drivers from wm6.0? And how to fill the XIP? Sorry I am a newbie to the kitchen.
Click to expand...
Click to collapse
NikMel said:
the easyst way is to copy "OEMDrivers" map from wm6.
You should copy XIP files one by one from other rom and put it in a map with the same name.
Click to expand...
Click to collapse
Thx again NikMel, these hints should be able to get me going...
What is the map you guys talking about? Where do i find it?
Regards,
Carty..

Samsung i780 kitchen - release 0.1 BETA

DEPRECATED VERSION: USE 0.2 BETA INSTEAD
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT=&quot]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Amazing Thank you very much!
inertiax3 said:
Amazing Thank you very much!
Click to expand...
Click to collapse
wheres the download link ?
Everything's online now!
Have a good time and let me know!
Thank you very much
And is it possible to use it for create a .bin flashable phone rom ?
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
tatoone said:
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
Click to expand...
Click to collapse
thats easy .. heres how to do it
fire up mirage on ur pc and chose the eboot+phone+pda option and select ur file ..
then dont connect the samsung to pc.. instead use file explorer on pc nd go to c and copy the three files to some other folder.. cancel the mirage on pc then
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
i was thinking the same thing.. ? if you try let me know too !
zohaer21 said:
i was thinking the same thing.. ? if you try let me know too !
Click to expand...
Click to collapse
I love your footer about the 8502 being a mistake. I also own one. what a dissappointing and relatively useless machine it is, and I can't find a buyer...
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
tatoone said:
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
Click to expand...
Click to collapse
That's interesting:
can you tell me exactly what rom did you use as a base?
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
Don't think you can.
In another thread, people were talking about a xip part needed to switch from wm6 to wm6.1
famusc said:
That's interesting:
can you tell me exactly what rom did you use as a base?
Click to expand...
Click to collapse
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
tatoone said:
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
Click to expand...
Click to collapse
No, I think there's a problem with payload update.
Thanks i will try it
where to get the part02.raw from ? i wanna work with dh4 rom ?
thanks
Convert Part02.raw to .bin
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Manchurian said:
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Click to expand...
Click to collapse
Thank you for using my kitchen.
First of all I ask you to use version 0.2 BETA: it contains some important corrections in conv3 tool.
Now:
1) Part02.raw is usually bigger than required. So we are interested into its shrinked size. I think that your 78512K bin file should be good.
In 0.2 kitchen it is explained how to check bin size is enough for new data.
2) It's not clear whether you'll have problem with a bin of a different language than raw file. As for my experience, I always got connection problem when I used a different language bin. You can try and then have a look at connection settings and at wifi Internet-Work settings. If you find no connection defined or you can't connect through wifi, than it doesn't work.
You should use a Dutch bin to be sure you'll have no problem.
Hope I helped you,
Bye
Hi, Thank You for your I780 Kitchen ,
this is first time i build a rom,
may i know that where can i found the file
part02.raw?
Thank You for reply =)

[HELP] Please kindly advise on replacing files in XIP

Hi every gurus and chefs,
Thanks to creators of kitchens and tools, i have had so much fun in cooking my own rom. Thank you so much.
Recently, i tried to convert the 1.93.456.2 WWE ROM to CHS. I have managed to transform 99% of the ROM into CHS. but there is only one problem. When creating the rom using the diamond kitchen or kaiser kitchen, at the ending part, it will fall back to use os.nb within the ROM\ folder.
From my understanding, the OS.NB file is an extracted OS from the original WWE ROM thus, the boot.hv, boot.rgu and wince.nls is still the WWE version. how do I replace these files?
Another question would be, when dumping the official rom, the dump_XIP folder is created. what is the use of this folder? if i make changes to the folder, how to i merge them into a usable part for cooking?
i have did a lot of reading on XIP porting, big storage rom cooking and etc. i just can't seems to locate one which explains how to replace files in os.nb or merging the XIP folder to usable part.
Can any kind soul please kindly advise?
Thanks you so much!
You may want to have a look at ababrekars SYS and XIP porting guide in Elf section....
ruffruff said:
Hi every gurus and chefs,
Thanks to creators of kitchens and tools, i have had so much fun in cooking my own rom. Thank you so much.
Recently, i tried to convert the 1.93.456.2 WWE ROM to CHS. I have managed to transform 99% of the ROM into CHS. but there is only one problem. When creating the rom using the diamond kitchen or kaiser kitchen, at the ending part, it will fall back to use os.nb within the ROM\ folder.
From my understanding, the OS.NB file is an extracted OS from the original WWE ROM thus, the boot.hv, boot.rgu and wince.nls is still the WWE version. how do I replace these files?
Another question would be, when dumping the official rom, the dump_XIP folder is created. what is the use of this folder? if i make changes to the folder, how to i merge them into a usable part for cooking?
i have did a lot of reading on XIP porting, big storage rom cooking and etc. i just can't seems to locate one which explains how to replace files in os.nb or merging the XIP folder to usable part.
Can any kind soul please kindly advise?
Thanks you so much!
Click to expand...
Click to collapse
Hi,
1. You don't have to replace/port XIP from the ROM of the same device. Only do this if you want to port other devices' ROMs such as Kaiser to Hermes, Diamond to Kaiser, Raphael to Diamond etc. It will boot.
2. Just replace the wince.nls version in the SYS\WINCENLS_WWE with the CHS one you have.
3. Modify all the MUI files and registry as to point to your Language of choice.
4. The OS.NB is needed as the shell/container for your new cooked ROM because it's the requirement for using the Tadzio's tools. So, leave it as is.
5. Cook the ROM.
At least that what I did when doing my Hermes version long before.
Cyphol.
ruffruff said:
Hi every gurus and chefs,
Thanks to creators of kitchens and tools, i have had so much fun in cooking my own rom. Thank you so much.
Recently, i tried to convert the 1.93.456.2 WWE ROM to CHS. I have managed to transform 99% of the ROM into CHS. but there is only one problem. When creating the rom using the diamond kitchen or kaiser kitchen, at the ending part, it will fall back to use os.nb within the ROM\ folder.
From my understanding, the OS.NB file is an extracted OS from the original WWE ROM thus, the boot.hv, boot.rgu and wince.nls is still the WWE version. how do I replace these files?
Another question would be, when dumping the official rom, the dump_XIP folder is created. what is the use of this folder? if i make changes to the folder, how to i merge them into a usable part for cooking?
i have did a lot of reading on XIP porting, big storage rom cooking and etc. i just can't seems to locate one which explains how to replace files in os.nb or merging the XIP folder to usable part.
Can any kind soul please kindly advise?
Thanks you so much!
Click to expand...
Click to collapse
please correct me if i was wrong..
afaik, XIP part is the same for every language,
also in the end part of the building, you need os.nb only as a "template" to rebuild the new one... it wasn't really use the content inside...
normally, you need to copy all content in the dump_xip to the ROM\XIP directory...
to learn about the process of diamond kitchen (which is based on kaiser kitchen so i assume the tools are the same), i think you better use the kaiser ROM, and try to dump it.. and see what directories and files are generated...
in kaiser kitchen, to rebuild the rom you need 3 dirs, OEM, SYS, and ROM\XIP
cyphol said:
Hi,
1. You don't have to replace/port XIP from the ROM of the same device. Only do this if you want to port other devices' ROMs such as Kaiser to Hermes, Diamond to Kaiser, Raphael to Diamond etc. It will boot.
Click to expand...
Click to collapse
He would need to if he wants a different OS build. Or am I wrong?
pkoper said:
He would need to if he wants a different OS build. Or am I wrong?
Click to expand...
Click to collapse
of course....
pkoper said:
He would need to if he wants a different OS build. Or am I wrong?
Click to expand...
Click to collapse
Yes, that's right for the reason. If that's the only reason, why don't you replace the core.dll
thank you everyone for your advise.
looks like i just need more reading.
thank you cyphol, pkoper and teamee for your kind advice.
I have replace the SYS\wincenls_WWE folder with SYS\WINCENLS_0804. i believe this might be one of the problems. i will try replacing just the wince.nls within the folder instead of replacing the entire folder.
files which i have modified includes the boot.hv, user.hv, default.hv, boot.rgu, a bunch of other rgu as well. i might have missed out a few others. so i will check again.
thanks everyone for your kind advice. if there is any other suggestions or points to take note of, please kindly let me know.
your guys rocks! XDA rocks!

ril.dll from diamond needed

Hi, I try to make my own dialer, I will like to get ril.dll from diamond, any ideas??
javiles said:
Hi, I try to make my own dialer, I will like to get ril.dll from diamond, any ideas??
Click to expand...
Click to collapse
Just dump a diamond rom....
Here you go.
This is from the latest (1.93) official ROM.
Thanks a lot, now I am trying to load that dll in visual studio 2008 but doesn,t load , may be is a xip dll and no solution???
Maybe this helps. More I couldn't find.
ril.dll was in the SYS folder, rilphone.dll in the OEMDRIVERS folder.
javiles said:
Thanks a lot, now I am trying to load that dll in visual studio 2008 but doesn,t load , may be is a xip dll and no solution???
Click to expand...
Click to collapse
load it in what way?
iXiR said:
Maybe this helps. More I couldn't find.
ril.dll was in the SYS folder, rilphone.dll in the OEMDRIVERS folder.
Click to expand...
Click to collapse
You have send ril.dll again, could you send me rilphone.dll to try that?
Thanks
javiles said:
You have send ril.dll again, could you send me rilphone.dll to try that?
Thanks
Click to expand...
Click to collapse
'rilphone.dll' is in the zip file too.
javiles said:
You have send ril.dll again, could you send me rilphone.dll to try that?
Thanks
Click to expand...
Click to collapse
I found your rilphone.dll was hidden D, don,t work also.
Thanks
javiles said:
I found your rilphone.dll was hidden D, don,t work also.
Thanks
Click to expand...
Click to collapse
I have downloaded IDA PRO, and it opens the dll , I can see all the functions but i don,t know how to make a new dll with all this info, this soft only exports to idb extension
I am not a programmer, so I can not help you further.
If there is something I can do, just let me know ...
javiles said:
I have downloaded IDA PRO, and it opens the dll , I can see all the functions but i don,t know how to make a new dll with all this info, this soft only exports to idb extension
Click to expand...
Click to collapse
uh, it is nothing that can be automatized. you need to understand assembly, need to understand how it maps to C, then you can reverse engineer the DLL's functionality, then use it properly from a C/C++ program.
but maybe you just need the RIL SDK, google for it

Categories

Resources