On the whole I'm very pleased with my imate PDA2K, but I am wondering whether anyone else is experiencing the following problems
1) After the phone has been on for a few hours, sometimes you cannot send an SMS. Once you do a soft reset then text message sending is OK again.
2) I've had this twice now. I make a phone call and I get no dial tone. A soft-reset sorts this out again. This is after the phone has been on for a few hours again.
3) The machine seems generally sluggish in popping up the text box for text message received/message sent confirmations after the notification icon has appeared in the top line.
4) Wifi access can be flaky. My signal strength generally shows as poor and the range is a lot shorter than an IPAQ HX4700 I have also used. This connects everytime in every room of the house.
5) Does anyone find the yellow tinge to the screen annoying. The XDAII contrast is better although actual screen on PDA2K is better when you get the viewing angle spot-on.
I never saw these issues on my XDAII.
I'm using the latest ROM update (1.12.22), Radio (1.02.00) ExtROM (1.12.169).
I'm begginning to consider using a SPV C500 Bluetooh phone with an IPAQ HX4700 if I need GPRS internet - it has a beautiful screen - any comments.
I really want a "one-device fits all", but these little problems are making me re-consider.
Mike
i second everything you said
my PDa2K is the same
John
I don't have Pda2k but consider most of your problems related about first ROM and Radio Stack Version..All devices have some bugs
Then about the yellow screen,that is hardware related,I am sure it is made by another company then Xda2 screen.
Note: We all know XDA2 also had initially one type screen,then after some months they (HTC) have sell XDA2 with other type screen..
I find the tint of the yellow screen changes with screen angle and I find it quite annoying.
My bluetooth headset (jabra) that has worked fine on my XDAIII for the last year and my XDA1 (with dongle) before that keeps loosing it's connection with MDAIII - works fine for half an hour after a soft reset but then stops working again.
while i can live with most of the things you mentioned so far pretty well, i can't live with the fact, that mine turns on every time i receive a short message, or when someone calls me.. because turning on not only means showing me what's on the display (that'd be ideal) but it does also mean, releasing the key- and screenlock! so whenever i get a message from someone, i start tapping on my screen probably without knowing it (since it's in my pocket) and everything gets messed up, and if i'm unlucky i might even call someone or delete stuff...
is there any workorund for that? (i have postet this problem to the general discussion earlyer this day, but nobody seems to either care, share the problem or know a solution... )
other than that, i am rather happy with my investment ;-)
cheers
pascal
They used a yellowish screen for a reason, it is 'suppose' to be ALOT easier to view under direct sunlight compared to the Xda II which will be almost unviewable under sunlight. But i personally rather have the white bright screen of xda II, who looks at their pda under direct sunlight at it anyways u can just use ur head to block the sunlight.
Related
Tried various WM2002 or 2003 ROMs, and settled back on WM2002 as it seems more stable, but I still have a problem where the phone seems to turn off (no green LED blinking), and when you press the top button to turn on the PDA it is as though you have warm reset it. I think I might be missing calls because of this and will have to change the phone if this is the case. Now when I know I might be expecting an important call I have to keep checking the green LED is blinking! I also get periodic SD card erasure unless I write protect it! Overall it is a nightmare to use because of these two issues.
ROM versions:
3.17.03 ENG
ROM date 5/15/03
Radio 4.21.00
Protocol 32S54
Hi mate, my XDA does the same thing - I have upgraded my ROM too (see profile for version etc.). Best thing I can offer to you is that it resets when bumped or knocked (like if I put it down on my desk a bit too hard), the screen will go wierd and then reset. Don't know why this happens but I keep checking my green light for flashing too. My vibrate function no longer works wither. I plan on calling O2 tomorrow to follo up the issues.
Well, I had the same problem with my QTEK 1010, os 2002, until I downloaded a very good clock/alarm software: pTravelAlarm (make a google search for it). among its functions is a very good one which is Chime, (in alarm menu) it wakes up the device each one hour so it will not get stunned. Now I never miss a call. The only disadvantage is that it makes the battery lasts a bit shorter than before.
john banks, there must be something loose in your device, carefully disassemble it and check all screws inside, if all ok, I'm afraid you might have to send it to a repair shop.
after installing the SER 1.2 special version from xda developer, my XDA run smoothly and I can see the sender of SMS anymore
I know this topic has be address many many times and there are still no soluation to the problem.
So.. I want to make a poll to see how many user is experiencing this problem.
I hope to grather enough data to see if it is a hardware problem or Firmware problem so that i can address to O2 regarding this issue.
I love my PDA/phone.. but... this issuse really bugs me cos i used the phone for business and it always happens when a important call arrived... :evil:
Pls, Lets Vote with your honest answer...
Derek
No problems here....
What i've experienced is that sometimes the ringing sound is very quite even though the volume is at maximum. I make a soft reset and everything's back to normal.
NO SOUND
I have also experienced the same. I normally have to do a soft reset to fix the problem. Seems its a firmware issue to me.
One more issue is that we need to disable the power off system setting after 3minutes.
If not, a phone call will be automatically ended after 3 minutes talking.
i have also experienced this problem. i had a important caller call me twice and i didnt hear my phone ring. it was also next to me. luckily, i had my backup phone with me when he tried that line.
agreed that we shouldnt have to soft reset to get back the ring tone functionality. i personally think its a caller id version problem, but thats my opinion cause its easier to fix. i just hope it isnt a firmware problem since i wont hold my breathe on O2 releasing a rom upgrade in my phone version.
im going to try some reg tweaks to see if it will help, once my main pc is up and running (currently moving). i just dont want to go back to an older rom because of a ringing problem. but it IS a big problem for most of us.
ps. sorry about the spelling mistakes and punctuations. im on my pda at a coffee shop.
Yup I have see the no sould on outgoing, no sound on incoming, reset does the trick for me. Also feel that the sound is low in general (even if set to max)
Ha.. i call XDA today in their headoffice in Singapore. The CS guy told me.. they know this issue and say there will be a new (Rom) or patch release very soon.
After seeing the vote result. I believe that the issue is do to software, not hardware.
I have a firend that design such product. he told me that it could be that DSP script is not written well. He said, the Echo Cancelling must be overflow causing the unit to manufunction. and after reset, the overflow will be clear out, so the unit function again.
I hope O2 is really releasing a new patch to fix this issue. If not, i think i am force to go back to my Sony Ericsson P910i or one PDA and one phone option.
i'm glad that O2 recognises the problem and not passing it on to other people. thanks for the information rcbear. glad you took the extra steps get them looking this way.
i hope "soon" means in a waek or two.
same problem
My ringer always works but sometimes, at least every other day. When someone calls me i can not hear them, they can sort of hear me, but the earpiece is dead. A soft reset fix's this problem. Is my issue related to the current issue dicussed in this thread? Thanks
Jeff
I have the problem
But I get it seldom and sporadically.
pda2k (out of the box)
ROM: 1.22.00 WWE
Radio: 1.06.00
Protocol: 1337.38
ExtROM: 1.22.162 WWE
AT&T/Cingular
Re: same problem
jeffro01 said:
My ringer always works but sometimes, at least every other day. When someone calls me i can not hear them, they can sort of hear me, but the earpiece is dead. A soft reset fix's this problem. Is my issue related to the current issue dicussed in this thread? Thanks
Jeff
Click to expand...
Click to collapse
Hi Jeffro01..
Welcome to the club.. :lol:
Derek
I don't seem to have the ring volume problem, but my phone will get into a state where it rings, I answer the phone, but there is no audio. In the six or so times it's happened, I haven't really determined if the caller can hear me. A reboot fixes it.
I can't pin down any one thing I do to cause it to get into this state, but it seems like a software/firmware issue.
I have this problem too.
I had to send my BT headset for repair for two weeks and noticed it did not happen during that time while it started again since I got my BT back.
When it happens (once to twice a week) I soft reset my SPVM2000 and it then is ok.
Also the BT Orange Switzerland patch makes the problem appear less often.
Phone ring problem got me twice today...
Both times, never heard three calls, but the phone still reports them as being missed.
Gotta be a solution for this or I'll be soft resetting every time I finish a call/use.
I had to send my BT headset for repair for two weeks and noticed it did not happen during that time while it started again since I got my BT back.
Click to expand...
Click to collapse
If so I have 2 questions for everyone who has this issue:
1, Do you use a bluetooth headset or any other bluetooth device (gps...)?
2, What is your current bluetooth version and build?
I have Bluetooth build 3900, and I'm using 1.33.
No probleme here
not using BT or WiFi.
Where can I find my BT version?
I don't also have the 3 minutes switch off pb, the PDA function switch off after 3 minutes but the phone remains operational. I often switch the PDA off myself whilst on the phone to save on batteries.
...Hi everyone! (1st post!)...
I get the dead-speaker in calls too...
I took delivery of my first SPV M2000 a couple of weeks ago; it had a few problems, one of which was that the speaker would be dead occassionally when making or answering calls requiring a soft-reset to resolve. I initially thought this might be caused by the device not correctly recognising external hardware had become disconnected - handsfree/BT/car-cradle etc. - but it did seem to be at random.
Orange replaced the device last week; and by day 3 without using any handsfree/cradles etc. and BT and WiFi not even enabled (much less paired/connected); the dead-speaker problem reappeared.
I'm not going to bother chasing Orange about this issue on its own (this device doesn't exhibit any of the other problems I had with my first); as it seems to be a pretty common problem that's going to require a software update to fix. Needless to say when I read that HTC have written a fix I will be on Orange's back to make a fix for their ROMs public. (dreaming?).
Just FYI, both the initial device I was supplied and the replacement have the same software versions (in my sig).
Regards,
Rob.
I circumvented (temporally fixed) the ringtone problem by setting the default ringtone to "None", and also set the phone to vibrate. Then Re-enabled MS Voice Command to announce all incoming calls. The only problem is, the voice isn't loud enough in noisy places, but it does the job in the office or semi noisy environment. I guess this will have to do until a verified fix comes along our way.
I have a SPV m2000 with the latest rom from orange, the first problem i had was when you go to reply to a text you sometimes could only send 70 char. before you had a 2nd text, but that was sorted by this site by turning the use assci code off, the onlt other problem is this -
Sometimes when i go to make a phone call, i dont hear a dialing tone, but after a few seconds it starts counting up like in connected to the call. The person im ringing says that they got the call and they could hear me but i didn't reply. This has happened many times now, it seems to be after its been a long time since i restarted the phone, e.g in the morning etc
I was just wondering if anyone else had ths problem?
Silent Calls
I had this problem from day 1 with my M2000, and I had to soft reset to clear it. Recently updated Radio to 1.13 and Bluetooth to 3900 and problem hasn't re-occured. Of course this may be a coincidence... :roll:
Turn on BT and leave it on, even if you don't use it. This worked for me.
Sometimes when i go to make a phone call, i dont hear a dialing tone, but after a few seconds it starts counting up like in connected to the call. The person im ringing says that they got the call and they could hear me but i didn't reply.
Click to expand...
Click to collapse
There is a huge thread on this somewhere with a poll (survey) in it. Last time I checked around 76% of owners of this handset have the 'no sound in call problem' to some degree.
My old BA did it 2-3 times a day. My new one with 1.13 radio ROM does it less often, but the problem still remains.
If you are really unhappy, and need a reliable phone you obviously wont want the BlueAngel again! Take it back to where you bought it. They will try to deny it is a known problem and at best give you a new Blue Angel. My advice is to find the thread on here, print all 10 pages of it and take it to where you bought the phone. They won't be able to deny it with the evidence right in front of them. Make sure you show it where the public can see/hear so they have to try and talk their way out of it in fornt of an audience
I did this to prove that the whistling screen was a known common problem, not something caused through my neglect and so I was entitled to a new handset under my warranty, not just a new screen (Everyone said the problem came back despite a new screen as the problem is with the circuit board)
As I remember, about 1 in 6 Blue Angel users will end up with a whistling screen after owning the device for a month so you probably have that to look forward to aswell.
My 1.40 iMate ROM may have helped too.
Read the wiki and upgrade to wm5. Problem has not happened for me in months.
I have a problem that more people seem to have, according to the search. I couldn’t find the “audio” tab in my Bluetooth-settings, so that didn’t help me.
The problem is as follows. After 1 day the sound on my compact III mutes, including vibration. Sometimes it's after 12 hours, sometimes after 2 days, there's no distinct pattern to be recognized. Also, it doesn't seem to matter if you use the phone or not, since it sometimes is alright at night and the sound is muted the next morning. This is for all sound-events (warnings, incoming call notifications, messages, mp3 etc), however, you can make a call without any problems and hear what the other person is saying. Once you’ve hard-reset the device everything is back to normal.
It does get annoying however, since I regularly miss calls due to this bug.
I had the same problem on my Vario in the past. So I’m guessing it’s somewhere in the software I use, but apart from Total Commander and TomTom6 I haven’t installed any third-party apps.
Yup i've been having a slight problem with the sound. I thought it was like the endless knackered M500's that orange used to send me which had speaker failure after about 10minuites! (Swear they kept sending me the same 2 faulty phones - I had 5 in 5 days once!) But a play in the bluetooth seems to get it working again.
The other annoying thing is that if you leave the power management at the default settings then occasionally the screen blanks without being able to get the backlight on again - so now I have to manually turn of the screen. Stil aint much of a problem - ive had a normal days use, 2 hours of radio play, bluetooth and wi-fi on all day and still have 35% battery - wehay!
Hopefully there'll be a patch soon to sort out he glitches.
I forgot to mention I had the exact same problem on my mda Vario also. I always thought it was a problem with that specific piece, but apparantly not.
Could it be the vibrate.cab that I'm using to produce vibrations when you use the phonepad? Or should I really do some further research in the bluetooth-department?
Same problem here.
Phone becomes completely silent after 9 hours in standby mode.
I need to reset it to get back sound
Does someone know what is going on here ?
Please advise. Thank you.
I seem to experience no problems the past couple of days (fingers crossed). I used the 'speed up your WM5' tweak where you set the Glyphcache to 32768. After I reduced it to 16something the problems seem to have disappeared.
I noticed that this problem happens when for example email is automatically checked during night. If email comes in (and is not read immediately) the phone will start notifying in background.
Notifications are kept and only a program like "check notifications" will delete them manually. But still if you delete them, the phone then needs a reset
to work properly again.
This is not a memory issue, it has to do with the notifications.
I do not know how to solve it.
I love my orbit but there are certain things I want to find out if they can be tweaked/changed.
1, can you modify the registry to use a bluetooth headset for audio on media files being played back through tcpmp ?
2, is there a way to return the phone automatically to the today screen after finishing a phone call ? I hate having to manually shut the screen after a call all the time
3, is there a way to improve the camera quality, its pretty poor ?
4, I use resco file explorer and on the today screen the icon for the battery has started to dissapear at random times, any ideas ?
5,when you finish a call you have the number on the screen, is there anyway to set the scroll key to go through the call history on that screen as opposed to having to go into the call history menu ?
Already reading on the loudspeaker distortion and loudspeaker while using tom tom have been helpful.
thanks. anyone feel free to add any niggles of your own you may have.
the answer to all these is:
buy something else.
wow what a constructive post...
constructive and realistic. Thanks.
1. I thought that was the whole point of A2DP, I don't use this so no real idea. Search "btaudio" and start from there.
2. Mine does this after a few minutes anyway. Otherwise just press the red call end button again. The fastest time you can force it in the settings is 1 hour.
3. It is possible the software could get updated in the future which may make some difference, but to be honest the camera is a bit of an extra thought anyway, phones never beat real digital cameras. don't just snap on default settings though, but good lighting is essential for a half decent shot.
4. Personally I reduce the amount of today plug-ins as much as possible, I don't like them or trust them. If it's the battery monitor itself that is important to you, check out this http://forum.xda-developers.com/showthread.php?t=270751&highlight=battery+status and here http://forum.xda-developers.com/showthread.php?t=263951&highlight=battery+monitor
5. No
6. Don't buy another device
thanks for that, at least some people have sense, I know BTaudio lets you playback the TT voice through a standard headset, wondered if it would do the same for media as opposed to buying a a2dp headset. thanks for the response anyway
So few artemis users on this forum says something, hermes.
Just get on with the rom HTC please.
eh ?
Hi Amino, I always seem to make dumb posts.
What I Meant was, if you consider this site as a whole, then the artemis appears to be an unpopular device. People have love hate things with it. All the active artemis threads are moans. I love mine but it also really pisses me off when it lets me down, which I personally put down to the shoddy rom and why I am waiting for wm6 before I attempt to change the shipped rom. Whereas the Hermes is already running wm6 and got gps and 400mz and a very busy forum.
Yes I am right, I always make dumb posts.
uniqueboy said:
Whereas the Hermes is already running wm6 and got gps and 400mz and a very busy forum.
Click to expand...
Click to collapse
But the Hermes doesn't have GPS.
The only reason that I put up with the Storage Card corruption problem on the Artemis is that it's about the only device with built in GPS that's worth considering.
You are right Philip, GPS is not working yet on hermes but, having read some of the threads they are only short of an arial. Maybe I need one of those eten things.
Trust me Uniqueboy if u want GPS that works DO NOT buy an Eten!!!
They take ages to get a gps lock even when driving with them in a cradle on a nice day, the connection also drops out quite randomly and often takes a good few minutes to reconnect. As you can imagine this is particuarly annoying when using TomTom in an unfamiliar area!!