I have a dead Qtek with bootloader 6.22. Windows CE does not load.
I tried the XDARit with the Bootloaedr fix for 5.17 and seems not work on the 6.22 veriosn.
Any body could tell me where can I find a bootloader patch (a diagnostic) for Version 6.22 ?
Related
i need solution for unlock my qtek , it's like spv E200
version 4.20.0
radio 1.12.00
Rom
operateur : 1.7.10.4
fabricant 1.11.10.0
microsoft 4.20.133490
it's locked to a french operator
thx in advance
Goto www.modaco.com ...
i didn't find anything in this website*
my qtek is 8060 and i need unlock
plz help
Hello,
This is an old smartphone, and the unlock simunlock is possible.
3 differents ways have been developed to simunlok the e200 :
- one software called "unlock.exe" which give the unlock code
- one software called "unlockc.exe" which modify the Rom directly in the smartphone
- a patch wich modify the .NBF before the upgrade of the e200.
I do not have the soft at my office but I can send it.
Bye
You can find it on modaco forum too.
Or http://www.spv-developers.com/
__________________
hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
Hy I have a Qtek S200 Sim Loked in Vodafone Spain and with Windows Mobile 5 in spanish.
ipl: 2.15.001
spl: 2.15.001
gsm: 02.19.21
os: 2.15.3.30
I beleive is G4. I try to do Sim unlock with:Touch Unlock, Lokwiz,
HTC Hermes, WST, Artemis Touch but it didn't work with any of this programs
I try to ulock with HARD SPL but when i run the program the Smart phone disconect from the PC and the program give's me an error. I try also copiing Cert SPC and Enable Rapi in the phone instaling them , replacing itsutils.dll in windos directory and then lunching Elf Unloker but allways the file with the code is empty. Please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hi,
Actually i m using AximX50v Japanese wm2003 version.
I want to upgrade to Wm6, but i am a very frightening if my pda become to brick.
From as your advice firstly,
+download WM05 A01
but after download
there are 4 files
WM50_B_A01_X50v_WM5_ENG.nb0
WM50_B_A01_X50v_WM5_ENG_nb0.crc
For OS
WM50_K_A01_X50v_WM5_ENG.nb0
WM50_K_A01_X50v_WM5_ENG_nb0.crc
"No suitable image found" is message afterward
Must i have rename myself like
For Boot Loader
DiMa_B_A01_X50v_WM5_ENG.nb0
DiMa_B_A01_X50v_WM5_ENG_nb0.crc
For OS
WM50_K_A01_X50v_WM5_ENG.nb0
WM50_K_A01_X50v_WM5_ENG_nb0.crc
RIGHT???
How to upgrade to wm05 A01 firstly, where i find correctly version
any body help me
I possible can you reply me by mail
[email protected]
Thanks so much
THINH
Hi everybody,
Before I ask you a question I would like to tell you that i searched in our forum for this question so many days but what I found doesn't help me.
So I will be thankful if someone take the time to answer me:
I have a HTC artemis and I cannot make it work again. In fact, I never flash it before and it was a gift for my birthday. I tried to flash it with a rom but the problem that I can't use the activeSync. the PCC doesn't work and only I can use the bootloader. Then I tried to use the USPL because the original rom is locked but it doesn't work because the USPL works need a connction with activeSync to The PC too .
I don't know what I could do?? please help me
The configuration of my HTC:
IPL 3.13.0001
SPL 3.13.0000
OS 3.13
GSM 02.94.90
Rom 3.13.406.1 FRE
Rom ext: 3.13.406.102
Thank you very much ...
Hello,
Please, there is no answer? I m in very bad situation and I'd like to do something to my HTC Artemis.
please help..
hi,
please my question is:
- can I use USPL without activSyn and using only the bootloader mode?
- if not, how can I flash my HTC artemis directly using bootloder?
My problem is that my actual rom is locked and I can't connect it to my PC with the activSyn.
Please heeeeeeeeeeeeeeeeeeeeeeeeeeelp
I had the same problem with my i-mate jam. You should download another flash update tool and try it again. It worked for me.
Hi,
finaly someone replies for me. Thank you.
Please how can I know the original ROM for my phone? using this configuration can someone know it:
The configuration of my HTC Artemis:
IPL 3.13.0001
SPL 3.13.0000
OS 3.13
GSM 02.94.90
Rom 3.13.406.1 FRE
Rom ext: 3.13.406.102
A Final question: can i flash this original ROM without activSync? it means using bootloader only?
thank you a lot..
Houssem
pleeeeeeeeeeeeeeeease help