sections=1 problem? - Upgrading, Modifying and Unlocking

I found "sections=1 not allow update" error in XDA II bootloader 1.06 when I update to another language version image, who can tell me what this error code means? thank you!

Related

SX56: Unlocked 2 from AT&T. 1 from T-mobile won't let me

Hi!
Well i'm new in this forum. Thanks to the ones who are viewing this.
This is what happened:
I brought 3 Siemens SX56 from the US. 2 locked to AT&T (windows 2002 installed), one locked to T-mobile (windows 2003 installed).
As the bootloader was originally 5.22 for the three of them, I did the typical unlock supplied by XDA DEVELOPERS (replacing the original flash with the XDADEV flash and running xdaunlock.exe)
That worked fine with both AT&T units which are already unlocked.
However the T-mobile one refuses to give me the unlock codes when i open xdaunlock.exe (error getting unlocked codes)
For what i've been reading, this is most likely because win2003 was installed in this one and i heard it's harder to unlock. But that's just what i heard.
Could anyone help me unlocking it?
I really appreciate!
Thanks!
Nicolas.
Ps: you can contact me to [email protected]
:x hi, thanks for xda unlocking software. i can't seem to unlock me xda II. i have the new XDA 2i.
Read:4, ooFF ( o meaning square)
Failed to do magic
search this forum for steps on downgrading ur rom to 2002 or even better is to just load the XDA-Developer rom onto it and it'll unlock it. then after that switch back to your original rom
remember to use xda tools to backup ur original rom on ur computer first!
Reply
Thanks a lot for your response
I already did that. I downloaded the roms from the at&t sx56 and loaded from sd card. The reason i did this is because the xda developers rom wouldn't let me run the upgrade with ppc2003 on it (a usb connection error was displayed)
I installed the 2002 ppc software and after that, i upgraded directly via ActiveSync.
Still i could not get the unlock codes (same error: error getting unlock code).
That's why i need help. Thanks!
interesting havent heard that one before.. have you tried downgrading to another t-mobile 2002 rom and then after that installed xdadev rom? or maybe downgrade the bootloader?
hi
i have same problem as nikoleman
i have a T-mobile pocket pc (i think it is WM2003 beta)
Pw10b1
rom version:4.00.16 ENG T-Mobile
with wallably 5.22 bootloader
i downgrade the bootloader to 5.15 and
the rom to 3.17.03 ENG cooked in kitchen
now infrared is not working and still get error getting unlock code
any help plz
yep
in fact that's the only way it would let me do it.
I backuped rom from the at&t ones and writed it to the t mobile. Then upgraded to XDA DEV special edition and it still throws me the "error getting unlock code" error.
Do you know why might this be?

xda1 pw10b1 hangs at startup

hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance
Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent
You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.
You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.
my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members
hi
if someone want to know how i successfuly repaired it u can ask me
RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09
RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.
What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx
After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks

Is it possible to CID Unlock via the Manual Bootloader?

Is it possible to run some type of application that would CID Unlock through the manual bootloader for Tmobile Dash? Or maybe a way to manually do it?
It has been suggested on this board that if you use the "upgrade only" rom in the ftp, then you can flash your phone with the roms available without cid unlocking your phone. I have tried everything with the information received from the helpful people on this board, but it seems that the methods suggested work on some Dash phones but not others. Give it a go, I haven't bricked my phone trying yet. Good luck.
When I try the UpgradeOnly ROM, I get the same error as everything else. ERROR 300: INVALID UPDATE TOOL... any ideas? I thought I remembered seeing somewhere that you can add /something tag when you execute the file in DOS to circumvent this error but I can't find where I saw that.
Interesting, I haven't seen that error yet. Mainly I get Invalid vendor id for the upgrade only rom.
Does nobody know the answer to this question? Moderators? Or does anyone know how to circumvent that error?
same mess on the htc rom
I have now tried for 3 hours but i get the same error message. My T-Mobile Dash is unlocked, so all I am trying to do is make it a clean HTC 620 ROM.
Does anyone know how to help us???
thanks
Darrell
tackettb said:
Interesting, I haven't seen that error yet. Mainly I get Invalid vendor id for the upgrade only rom.
Click to expand...
Click to collapse
the invalid vendor id message that your getting is telling me that your phone is still CID locked. you have to CID unlock then run the update util then it will allow you to load the HTC ROM.
basically put -
IMEI-CHECK.com
38 bucks
Done
CID unlock
Any idea how to unlock the CID?? i got the invalid vendor ID error...
TRy this :
http://forum.xda-developers.com/showthread.php?t=329605

How to upgrade to wm6 with htc-620 free.

My excalibur is not original locked, i want to upgrade to wm6, but when i try to upgrade, i got a message error `[244].
Is not possible to upgrade if the phone is not a t-mobile dash?
Thanks
Run the installer again once you get that error message. Should be fine.
i think doesnt works, the same message error; invalid model....
thanks
Ahhh, invalid model ID! Sorry, I must have misunderstood... You need to download the bootloader upgrade first.
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Run that and then try upgrading.
I don't know where that bootloader downgrade came from but whoever did it deserves a medal.
Allowed me to go from T-Mobile WM6 back to HTC s620. Without it, I'd have been screwed.
-Mc
same result
with spl-1.11 upgrade only same result, id error.... any solution?
Thanks a lot.
Hi,
as far as I know the only way is to unlock your phone with http://www.imei-check.co.uk
Newchurch
fernandet1 said:
with spl-1.11 upgrade only same result, id error.... any solution?
Thanks a lot.
Click to expand...
Click to collapse
if this Update SPL 1.11 also doesn't work you'll have to unlock with IMEI-check and do this steps
but my pne is free
my phone is free, i have shop without any operator, original unlocked.
Thanks
it coud works with the modifid update with imeicheck?
I have modified these two parameters, but i have not unlock code because my htc-620 is original unlocked.
thanks in advance
The unlock which is necessary is to set the phone in "engineering mode" so that it accepts every ROM. This has nothing to do with SIM or net lock.
IMEI check sets your phone into that mode to remove SIM/net lock.
So it's a 2in1 unlock.
So even your phone accepts every SIM you have to unlock it to this engineering mode with IMEI-check. ATM there is no other known method to do this.
then, i need to send my imei to imeicheck to unlock in order to access to the engine mode?
Thanks!!

Error 300 Invalid Update Tool

Hello
Can anyone help me?
I was trying to upgrade my orbit but the phone is blocked.
The only thing that is able to do is to go on bootloader screen and nothig else.
I tried to upgrade but i am receiving the message ''ERROR 300 INVALIDE UPDATE TOOL''
Any idea ?
Thanks

Categories

Resources