i have a xda2, which hasnt got the gps stauts feature installed,
when i connect my working haicom gps via tt3, it keeps saying gps disabled, but there is no where to set it as there are no icons, i have looked everywhere, i think my xda 2 dosnt offer that feature or its corrupt, i have done a hard reset but nothing happens, ive been trying for ages reinstalling the s/w and all sorts..
or i can i reinstall all the operating system back on the xda??,
i need some proper advise so any info will be appreciated as im a non techie
cheers in advance guys
You have to disable the beam option under your connections.
This is in 99% the problem why you canĀ“t access the comport where your gps reciever is connected.
Also there should be an GPS icon under Settings. There you have to set it to COM1 and the Haicom reciever...
HTH
Stefan
i have disabled the infrared beam, but there is no icon or no where in settings regarding the gps, it was there originally but since i have been messing around with it, i can not see it at all, i have done a hard reset but that does not do anything
stricklygfunk said:
...but there is no icon or no where in settings regarding the gps ....
Click to expand...
Click to collapse
Search in your device after a file TomTom GPS.
Otherwise try to reinstall the application....
have also treid that, and i still cant find it,
looks like its going back to warranty repair
Related
I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......
I have not tried it with BT GPS, but looking at what everyone else went through with their Headsets and bonding issues, I can defintiely attest to the fact that the new BT Stack on 1.72WWE works great! I have never had to re-pair my Jabra BT 250 since I paired it the first time two weeks ago. I have also been able to ActiveSync over BT without any problems.
Lucky u guys, when i did the update, i cant active sync through BT
first_major:
Try this attached document and see if it helps.
sheran_g,
Thaks alot, all i was missing was to do the active sync profile, your document helped me.
Thaks again
(some) GPS problems with 1.72 (and 1.66)
Victor said:
I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......
Click to expand...
Click to collapse
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Victor said:
..... I say yes .....
.... unless one tries "the old fashioned way" with BT GPS.
Click to expand...
Click to collapse
I can not remember that NO was an option. Do you mean this with the old fashion way???
Ronald
Hi guys
I'm guessing that the 1.7 upgrade is not avalable in Australia??? I cannot find it on the MyXDA website for download? is this update that you are talking about not for Australia/Asia?
Cheers...
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
You might need to download Adobe Acrobat Reader in order to view the file. You can find the Acrobat Reader here.
dont try dow view the file in IE
Download it first and THEN view it
This works for me
smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
With gozilla I can also not download the pdf, but with "save target as" it works.
@sheran_g
BTW Thanx for the post
Re: (some) GPS problems with 1.72 (and 1.66)
ronald2oo2 said:
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Click to expand...
Click to collapse
Are you sure this isn't TomTom's GPS Driver causing this? TT's GPS Drivers since v2.08 have locked the BT Com Port for exclusive access by TomTom and this prevents other apps from accessing a BT GPS. Solutions are either install v2.07 which was the last driver that did not do this or remove 'the Tomtom~GPS' entry which is the culprit, removing this removes the BT Com Port lock but does not affect the use of TomTom.
@ griffog
Actually I use TomTom ~GPS 3.03 which does not have this problem anymore! Anyhow I still (temporarely) remove the TomTom ~GPS driver and soft-reset when I test with Alturion.
But thanx for the tip.
BTW it does effect the use of TomTom for me! I guess you have a serial (non BT) GPS !?
Ronald
No I use BT GPS unit's exclusively. I'll have to investigate this as I have not heard that v3.03 no longer has this problem!
@griffog
I have this information from the Dutch PocketPC-club TT forum.
It is also consistent with what I see since the TT3.03 upgrade, even while my other GPS application (Alturion) is not working. If I run TT GPS and close it and then start Alturion the Blue LED of the GPS starts flashing fast (sadly I still get "no GPS found" however).
Ronald
:wink: remember you heard it first from me, the Premier GPS Resource :wink:
Excellent news! I've just loaded it up to test and you were right It's such good news that I've posted a front page news item, thanks
Indeed it was very good news.... but therefor also more disappointing for me that I don't get Alturion -my second GPS application- to work (on the eve of my holidays).
If you also use Alturion 5.3.1.4 (you seem in to GPS), can you share your configuration with me?
OS (1.66+?)?, BTHTools or WM serial BT profile? GPS? GPS config in Alturion? and anything else you might consider important.
I really need some new straws to grasp because I have no more ideas about what to try.
Ronald
Sadly Alturion hasn't made it across the channel. I'ce contacted them on numerous occasions for a review copy but never received a reply.
Another cool fix is the fact that you can now be connected through Activesinc using the cradle and at the same time now you can receive MMSs without a problem.
Before the 1.72 upgrade, you just couln't do that. :wink:
Hello there,
Did anybody find out how to access the internal GPS of the HTC P3300 without using the GPSID (GPS Intermediate Driver)?
Although the internal GPS works fine for me with many programs (TomTom, Pathaway, Fugawi, VisualGPSce, etc.) I did not find a way to program the internal GPS using any of the common GPS tools (such as SirfTech, Aplsirf, CeMonitor, GPSTweak, etc.). In particular I'm very interested in enabling/disabling the SN and the SBAS Mode.
I'm guessing that programming the internal GPS via the GPSID is not possible (or not supported) while it might be possible by accessing the hardware GPS directly. However, I don't know how to do so...
During my investigations I found out the following details:
Based on the MS GPSID Reference the HTC P3300 must have a plug'n'play based internal GPS receiver, as there's no valid registry key found in the corresponding HKLM/System/CurrentControlSet/GPS Intermediate Drivers section.
Looking into the HKLM/Drivers/Active section for a suitable pnp GPS driver I only found COM3 (SerialGPS.dll) which for me seems to be the corresponding hardware driver for the internal GPS. However, accessing COM3 always fails for me with any program.
Does anybody know how to get COM3 (SerialGPS) to work?
Or does anybody know how the GPSID talks to the internal GPS and why I can't do it directly (or how I can do it directly too)?
Any help and discussion is higly appreciated.
Thanks, GeenZ.
Have you tired to delete the gps driver in registry, and after a softreset tried to access direct on com 3 ?
pklein90 said:
Have you tired to delete the gps driver in registry, and after a softreset tried to access direct on com 3 ?
Click to expand...
Click to collapse
I already have tried disabling the GPSID. This can be done either by the GPS control panel or directly in the registry by setting the key HLKM/System/CurrentControlSet/GPS Intermediate Driver/IsEnabled to "0".
The effect was that the virtual GPS COM port from the GPSID (COM4) was no longer available, but COM 3 still did not work.
Does deleting and softreseting make a difference to disabling?
How could I "completey delete" the GPSID in the registry?
Thanks, GeenZ
I'm interested in this too since I've found reading from COM4 using CF 2 is really buggy and hangs the device. I wanted to see if talking directly to the GPS instead of the intermediate driver would speed things up a bit.
Hi,
As I reported in this Thread I did not find any solution to get direct access to the GPS port.
GeenZ
indiekiduk said:
talking directly to the GPS instead of the intermediate driver would speed things up a bit.
Click to expand...
Click to collapse
it would also probably solve the problem of M650 users stucked with a different firmware version of this internal GPS which doesn't work under wm6
If you would take a look at my following thread
it explains the problem.
Alot of people think they cant connect to the GPS device, but actually it is connection but just nog receiving data the right way.
Slovek said:
If you would take a look at my following thread
it explains the problem.
Alot of people think they cant connect to the GPS device, but actually it is connection but just nog receiving data the right way.
Click to expand...
Click to collapse
Thanks Slovek
Should we Thank HTC for this great feature ?!
Already had contact with them, initially they put this up as a 'feature' but about a month ago i received a short list of questions regarding the GPS module. so i hope their going to change this.
Hope so
at least for the "perennity" of this device !
Hi there,
Is there a way i can test if the gps chipset on my new p3300 is working properly?. I installed Iguidance but it will never get a fix although it does auto detect the gps port . I ran quickgps over wifi and despite downloading the latest fixes, Iguidance fails to get a fix
I am looking for any freeware appz which can just tap into the gps receiver and start spitting some data so i can be assured its not the gps module but Iguidance. Something like a gps viewer which displays the # of sats, lat n longitudes etc.
I appreciate any help I can get as I have only 2 more days before i can get this device exchanged.
Thanks in advance!~
btw, I am running Wm6 using B&b3.7 rom
Search on google for visualgpsce.
Bye
Grab a copy of the TT GPS Driver 2,06 from here http://www.pocketgpsworld.com/modules.php?name=Downloads&d_op=viewdownload&cid=13 install that as it is an application in its own right.
Fire up the application on the Artemis and select the GPS tab in the application Use the following Settings:
Top drop down box "NMEA 0183v2 9600"
Second drop box "COM4"
Make sure the two sliders in the middle of the screen are to the right, then check the grey/ blue box top left, return to the "Status" tab and take the unit outside, you should see some activity and get a position fix after a couple of mins - Mike
Thank you guys so much..
After running the app, i got 12 sats in view and 7 fix. So w00t, the gps chip is working.
Now to figure out whats wrong with iguidance
Thanks again...
Not too sure about that app as I have not tried it (yet) - does the GPS hardware actually start when you fire up the application - if you can configure it to use COM4, Baud 9600 do so and try it again. The indication the GPS has fired up is down to the LEDs on the device, once started it will flash orange to signify its in use. If this doesn't happen you might need to look into using Fransons GPS Gate to present a virtual GPS port to the application - Mike
Well, I do see the orange light blinking when Iguidance is running but still sees no sat's.
I even upgraded to V3.01 and same issue. Also tried Franson gate app and no luck.
I could try tomtom since that appz does see the sats and gets a fix ( tried it using a free US map) but i am having trouble loading the N.A+canada map since i don't have the cab file for it just the extracted map files which Tomtom HOME will refuse to load unless its a cab file i believe
Off to google to hunt on instructions on how to make cab files...
last time i checked iguidance v3 wasn't compatible with the artemis.
Oh ic. I did come across a couple of posts reflecting the same .
Oh well..I loved the map loader feature of Iguidance. Sad to see its gone in the upcoming V4.
Anyways I got tomtom running.. i was suppose to have the maps in the root folder of the memory card not in a sub-folder !
can anyone help me plzz
when i use google map USE GPS it says no gps reciever found
and when i use tomtom 7 it says same sort of thing and according to my little knowledge it is gps inbuilt mobile isnt it can anyone help me answer this plz if there is wrong with my blackstone plz let me know how to fix it. plzzzz
When you start TomTom click on the box to the bottom right to bring up status summary, then click on the bar to the right that says staellites, choose configure, slect "other nmea gps receiver" slide baud rate to max (115200) then select "Com4"
Job done
If you have like me installed VOIP, try this one:
To solve the problem just rename file /windows/dnsapi.dll to for example dnsapi.dll_bck and make soft reset or turn off and on your device.
There will be created a new file with the same name and you can delete the old renamed one. Then the GPS working properly as well as VoIP. Good luck...
Thank you
Thanks for you help but still just make me sure plz blackstone got inbuilt gps or not??? are you people talking about anything else.. coz i tried both of above options but no still when i use google man it says no gps ... bla blah blahh
and in tomtom 7 it says no singnal and when i force it says you may be inside building.....
hi
u need to go to Tomtom setting. First go to windows setting , click external gps to define your port com as 4, and the rate: 9600 etc, then start tomtom, go to setting, choose gps setting, then select external gps receiver (not sure, i forget tomtom!) choose the right rate and port come, 4 and 9600. then it should be working! if it still not working, try google it! good luck!
and the google map thing, forget it, it wont work and take data from Gps, as far as i know, all it uses gps is to identify ur current postition!!!! then it use 3g to download data just like when u use google map on ur pc!!! careful the data costs!!!
Hi Guys,
finally my new (german) Rhodium arrived today.
All is fine except the GPS module.
It seems deactivated and I have no idea how to activate it.
Google Maps doesn't work, GPS settings are gray and the GPScyclecomputer sais GPS it off.
Any idea what to do?
Thanks
Duke
In Google Maps under menu-options do you have windows manage the GPS settings?
Hi,
thanks for your reply.
The menuentry for the GPS settings is gray and unavailable.
The winmo GPS settings don't accept any chances at the hardware tab, hardwareport setting is none, i think thats because of the internal device?
Duke
My Touch pro 2 GPS also don't seem to work.
I have a dutch version of the TP2.
The HTC GPS Tool isn't able to get a fix.
TomTom 7 Isn't able to get a fix.
Its set to com 4-> None -> 4800 -> Let windows manage.
Is this perhaps a problem with other then english roms?
After a hardreset all works fine.
Needed about 20minutes for TomTom 7 to get a fix but finally it has one.
I have performed several hard resets with the 1234 okay and still no luck with the GPS I think i'm going to caal htc
I called HTC Netherlands.
They said TP2 is only compatible with Copilot 7.
Also they said to set it to com9 with a baud rate of 9200.
I'm unable to set it to a baud rate of 9200 it switches back to 4800.
So still no luck with the gps. I'm a little bit disapointed with the support.
I keep you posted.
I did contact the HTC support, too. They advised the hard reset.
Did you go out for a walk trying to get a fix? Did it for me.
You also should run QuickGPS to download current satelite data from the internet, and then get out, to a park maybe and give it time. Could be up to 30minutes!
Good luck!
load of crap if someone tells you that it's only compatible with Copilot. GPS chip will work any software as long as they are compatible with each other. TomTom 7 works just fine in TP2.
After a 100km drive with TT 7 still not able to get a GPS lokation with the internal GPS. Its set to COM 4 witha baud of 4800.
The Parrot T3200 easely finds 8 active GPS satalites.
I keep you posted.
It worked for me straight off with Live Search, no need to change any settings. Maybe Orange got something right for once?
Have you tried GPSTest (http://forum.xda-developers.com/showthread.php?t=360477 and many other places round here) that should help show what is going on.
Gordon
I tried that tool with diffrent settings.
It sees some red dots in the Satallite tab. But is also unable to connect to a satalite. Whilst with my parrot T 3200 it connects with the HTC GPS Tool.
Still the GPS and radio was not working after the WiMo 6.5 Upgrade.
I Called HTC and my touch pro 2 has been shipped to a repair center.
They replaced the motherboard and its working perfect now.