xda ............ error getting unlock code ... i need help - Upgrading, Modifying and Unlocking

hi
i have xda i have transfered xda unlock exe file to the phone but when i click on that file it gives me :error getting unlock code .....
i have unlock by this file many times before but now i am stuck
please help and tell me what could be the problem , phone details are below
rom ver:3.12.07eng
romdate:08.13.02
radio ver 4.06
protocal :32s54
regards
gsm killer

Re: xda ............ error getting unlock code ... i need he
gsmkiller said:
rom ver:3.12.07eng
Click to expand...
Click to collapse
This should be the problem.
The unlock tool requires the wmodem application. Or you can use the xda manipulator via serial cable....
HTH
Stefan

Re: xda ............ error getting unlock code ... i need he
hi
thanks for your reply
where to get wmodem application and how to install please i need instruction
and in how much time does xda manipulator reads info from the phone i tried for 5 min but still it says reading
regards
gsm killer
LumpiStefan said:
gsmkiller said:
rom ver:3.12.07eng
Click to expand...
Click to collapse
This should be the problem.
The unlock tool requires the wmodem application. Or you can use the xda manipulator via serial cable....
HTH
Stefan
Click to expand...
Click to collapse

Re: xda ............ error getting unlock code ... i need he
gsmkiller said:
hi
thanks for your reply
where to get wmodem application and how to install please i need instruction
Click to expand...
Click to collapse
If that was me,
I'd rather intall the 3.17 Eng or 4.01 Eng ROM either one cooked in Lumpy Stepfan Rom Kitchen http://lumpistefan.dyndns.org/ and load it with the help of a SD card + XDA-Tools.
Another possibility is to load the old Special Edition ROM which does the trick also but with less flexibility
Tanguy

hi
how to make backup in sd card ?
regards
g.k

Re: xda ............ error getting unlock code ... i need he
hi
please tell me how to make backup of the operating system on sd card and how to restore it back ..
thanks
regards
gsm killer
gsmkiller said:
hi
thanks for your reply
where to get wmodem application and how to install please i need instruction
and in how much time does xda manipulator reads info from the phone i tried for 5 min but still it says reading
regards
gsm killer
LumpiStefan said:
gsmkiller said:
rom ver:3.12.07eng
Click to expand...
Click to collapse
This should be the problem.
The unlock tool requires the wmodem application. Or you can use the xda manipulator via serial cable....
HTH
Stefan
Click to expand...
Click to collapse
Click to expand...
Click to collapse

gsmkiller said:
hi
how to make backup in sd card ?
regards
g.k
Click to expand...
Click to collapse
gsmkiller,
Two possibilities
1. Enter bootloader mode and navigate in the menu to copy elements you want to the SD card
2. Use XDATools to copy your ROM to the SD cards of directly to your PC.
This forum is full of posts about these two methods
I think there are some alternative methods but never tried them personally
Tanguy

Re: xda ............ error getting unlock code ... i need he
thanks alot
We have done successfuly made backup , now when we want to flash XDA developers serv12 rom to the phone it dones't connect the boot loader version of my phone is 5.22. Do we need ''''fixbroken bootloader''' to down grade the boot loader ?????.
regards
gsmkiller
gsmkiller said:
hi
please tell me how to make backup of the operating system on sd card and how to restore it back ..
thanks
regards
gsm killer
gsmkiller said:
hi
thanks for your reply
where to get wmodem application and how to install please i need instruction
and in how much time does xda manipulator reads info from the phone i tried for 5 min but still it says reading
regards
gsm killer
LumpiStefan said:
gsmkiller said:
rom ver:3.12.07eng
Click to expand...
Click to collapse
This should be the problem.
The unlock tool requires the wmodem application. Or you can use the xda manipulator via serial cable....
HTH
Stefan
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse

I think it is. But I'm sure at 80% only!!!
Actually, since it was not the case for me, I've seen posts talking about it but never ready it carefully to guaranty.
I recommend you search for the forum for absolute confirmation,
Unless some one would confirm?
Tanguy

Related

HTC Diamond & SPL-1.40

First i want to say hello to all here on the forum. I just registered, did some research but i could not find what i was looking for.
My HTC 3700 have loader SPL-1.40.Olinex installed (Volume- & Reset)
Before i start try change my bootloader i want be sure i can reinstall the original loader (warranty), thats mean the one who is inside my HTC now or another one i can download from internet.
- is there a program that allow me to backup my actual bootloader to PC or ..
- can i download the original SPL-1.40.Olinex from internet, and if yes where can i find it ?
I am sorry if i start my topic with a request. I will keep searching on internet and hope i can find it
thank you for your help
ljazzo1 said:
First i want to say hello to all here on the forum. I just registered, did some research but i could not find what i was looking for.
My HTC 3700 have loader SPL-1.40.Olinex installed (Volume- & Reset)
Before i start try change my bootloader i want be sure i can reinstall the original loader (warranty), thats mean the one who is inside my HTC now or another one i can download from internet.
- is there a program that allow me to backup my actual bootloader to PC or ..
- can i download the original SPL-1.40.Olinex from internet, and if yes where can i find it ?
I am sorry if i start my topic with a request. I will keep searching on internet and hope i can find it
thank you for your help
Click to expand...
Click to collapse
Read and you will find the answer to your question. It is easy to find.
jmermel said:
Read and you will find the answer to your question. It is easy to find.
Click to expand...
Click to collapse
Hi John
i found this link
http://forum.xda-developers.com/showthread.php?t=335568&highlight=backup+htc+spl
but honestly i could not see SPL-1.40Olinex or how to backup from my HTC Touch diamond
i used the forum search for "SPL-1.40.Olinex" but honestly i could not find anything, i won't give up ...keep searching
thank you anyway
ljazzo1 said:
Hi John
i found this link
http://forum.xda-developers.com/showthread.php?t=335568&highlight=backup+htc+spl
but honestly i could not see SPL-1.40Olinex or how to backup from my HTC Touch diamond
i used the forum search for "SPL-1.40.Olinex" but honestly i could not find anything, i won't give up ...keep searching
thank you anyway
Click to expand...
Click to collapse
Try using the google search as its much better than here.
see the results of the same search in google
also check this out modmydiamond
@ljazzo1
bootloader is already patched. It seems that you either received phone with non-original bootloader or someone replaced original bootloader with patched version for you.
SecureGSM said:
@ljazzo1
bootloader is already patched. It seems that you either received phone with non-original bootloader or someone replaced original bootloader with patched version for you.
Click to expand...
Click to collapse
how do you know that my bootloader is already patched ? i have the SPL-1.40Olinex and not the Hard-SPL ........ can you help me to understand more?
thank you
ljazzo1 said:
how do you know that my bootloader is already patched ? i have the SPL-1.40Olinex and not the Hard-SPL ........ can you help me to understand more?
thank you
Click to expand...
Click to collapse
if it says Olinex. that means it has been already patched. olinex is one of the most respected users of this forum and that means you don't have the original spl. it means this device has been already patched with a spl provided by olinex. where did you buy your device?
thx for the answer. i bought my htc on internet. if so i can change and update radio and rom, is that correct?
what is the difference between Rom: 1.37.405.1 WWE and RUU_Diamond_HTC_WWE-ME_1.37.456.2 ... why *ME*, what ME means ?
No one can explain me which is the difference between Rom xxxx WWE and Rom xxxx WWE-ME ?
My HTC ist equipped with UK firmware
thx u

ROM update=network unlock???

Hello, I hawe a qestion, if I put a new ROM in my Diamond it will network unlock the phone??
kernelcpu said:
Hello, I hawe a qestion, if I put a new ROM in my Diamond it will network unlock the phone??
Click to expand...
Click to collapse
No
http://forum.xda-developers.com/showthread.php?t=414835
No No No
Ok, thank you!
Is there any free way to unlock it?
xdaking said:
No No No
Click to expand...
Click to collapse
One could always hope
Rom update will not unlock the device.
You can use code to unlock or if more adventurous, than there is software hare! maybe not free, or you can take a look on ebay.
Beware unlocking using software means:
Flashing Hardspl
Flashing Radio
and than you can do this.
This may have warrenty issues. with software you can unlock, CID and Security also.
Good luck.
Read the first sticky thread in this forum by OliPro....."Diamond Security/CID Unlocker"

JAF for using exec

At present I have not a Universal resources, I think it has damaged part and then boot, so there is a way to use JAF reload bootloader for it?
huu tien said:
At present I have not a Universal resources, I think it has damaged part and then boot, so there is a way to use JAF reload bootloader for it?
Click to expand...
Click to collapse
READ the Wiki
orb3000 said:
READ the Wiki
Click to expand...
Click to collapse
Thanks,i see it

Unlock gio

My brother wants his gio unlocked (sim unlock) is there any to do that free
Sent from my GT-S6500D using xda premium
You should always check the stickies first, but here's some help
http://forum.xda-developers.com/showthread.php?t=1397120
Sent from my jelly bean
http://forum.xda-developers.com/showthread.php?t=828534
Peteragent5 said:
http://forum.xda-developers.com/showthread.php?t=828534
Click to expand...
Click to collapse
That's for galaxy 5....
Sent from my jelly bean
This method worked for me.
If your phone is already rooted it is really simple. I can also advise to use the Hex editor mentioned in the post XVI32 is freeware and works good. Sometimes some hex editors have a different searching engine and then the advice in the post wouldn't work.
Ok guys thanks i succesfully rooted and unlocked 3 gios :good:
Sent from my GT-S6500D using xda premium
Hmm i've tried to unlock my Gio but ended with SIM locked since the code didn't work for me.Can u guys help me extract the right code?
Thanks
alexfreakyy said:
Hmm i've tried to unlock my Gio but ended with SIM locked since the code didn't work for me.Can u guys help me extract the right code?
Thanks
Click to expand...
Click to collapse
Perhaps 07024947 will do it for you
nAFutro said:
This method worked for me.
If your phone is already rooted it is really simple. I can also advise to use the Hex editor mentioned in the post XVI32 is freeware and works good. Sometimes some hex editors have a different searching engine and then the advice in the post wouldn't work.
Click to expand...
Click to collapse
I've tried to unlock my Gio but my eyes burned. Can u guys help me extract the right code? I couldn't find it...
Thanks in advance
can someone tell me wich would be my ulock code???
nikanta said:
can someone tell me wich would be my ulock code???
Click to expand...
Click to collapse
Interesting, it says there is no code (00000000000) for me when I checked it.
Harakhti said:
Interesting, it says there is no code (00000000000) for me when I checked it.
Click to expand...
Click to collapse
tryed entering 00000000000 and it says unsuccesfull...any other ideas??
can i install any custom rom as it is right now(locked)??
i am already rooted
McFerr said:
I've tried to unlock my Gio but my eyes burned. Can u guys help me extract the right code? I couldn't find it...
Thanks in advance
Click to expand...
Click to collapse
Your code is 47460696.
nfribeiro said:
Your code is 47460696.
Click to expand...
Click to collapse
Same here tried to find the code for several hour until the eye went numb...Cam some one help! Please!
Same problem
Same problem here. Can't find the code
It worked for me, thank you very much!
Anyone help me with my code bml5?
nikanta said:
can someone tell me wich would be my ulock code???
Click to expand...
Click to collapse
Anyone help me with my code bml5?
I already test 61315793 and nothing.
Any help me?
I apreciate that,
please help me too
Hello. I updated my software from the meniu with the original samsung firemware of my gio and at final I got my sim locked. I tried installing cyanogen mod and many other android, but still the same thing->sim locked... I extracted the bml5, but I can't find the code. Please help me :crying::crying::crying::crying::crying:
Help finding unlock code...
Can someone tell me which would be my unlock code???
Thanks !!
:silly:
I finally found the code... 40975830:cyclops::fingers-crossed::laugh:
Unlock my galaxy gio
Who will help me i need 8 digit code for this IMEI: 359904044504611. Thanks

problem in Jackos S3 WM6.5 21913-Sense 2.5 ROM

Dear all;
I have HTC touch pro 2 u.s. cellular mobile and i installed the ROM below and the phone is not complete the boot process after the update. The screen is hanged at the stage of "Touch pro2" image.
[ROM][01.08.2011][WWE]Jackos S3 WM6.5 21913 + Sense 2.5/2.1|TF3D2.1
Chef - Jackos
SYS Build - 21913
Build date - 05 November 2011
Notes: Only WM6.5 ROM still using Sense 2.1/TF3D.
How to solve this problem??
Best Regards...
mstfysn said:
Dear all;
I have HTC touch pro 2 u.s. cellular mobile and i installed the ROM below and the phone is not complete the boot process after the update. The screen is hanged at the stage of "Touch pro2" image.
[ROM][01.08.2011][WWE]Jackos S3 WM6.5 21913 + Sense 2.5/2.1|TF3D2.1
Chef - Jackos
SYS Build - 21913
Build date - 05 November 2011
Notes: Only WM6.5 ROM still using Sense 2.1/TF3D.
How to solve this problem??
Best Regards...
Click to expand...
Click to collapse
Start with a task 29, and then load the stock rom. If you can do that then perhaps your phone is not bricked.
Here is a link to the US Cellular shipped Rom. Let us know how it works out for you! Just keep trying, I have not bricked a device yet! =]
RUU_Rhodium_W_WM65_USC_WWE_2.01.573.3_signed_RS2.18WV_NV1.63_15075_Ship_SMS2016.exe
wizardknight said:
Start with a task 29, and then load the stock rom. If you can do that then perhaps your phone is not bricked.
Click to expand...
Click to collapse
Thank you very much for your help. i started a task 29, but i still have the same problem. the device can't complete the boot process and stopped on the "htc quietly brilliant" splash screen.
how to solve this problem.
Thanks
mstfysn said:
Thank you very much for your help. i started a task 29, but i still have the same problem. the device can't complete the boot process and stopped on the "htc quietly brilliant" splash screen.
how to solve this problem.
Thanks
Click to expand...
Click to collapse
Did you read the task 29 thread? You know there is no OS after you do the task 29, correct?
Did you try to load the stock rom after you completed the task 29?
wizardknight said:
Did you read the task 29 thread? You know there is no OS after you do the task 29, correct?
Did you try to load the stock rom after you completed the task 29?
Click to expand...
Click to collapse
Thank you very much for your help. could you please tell me how to load the stock rom.?.
Thanks...
mstfysn said:
Thank you very much for your help. could you please tell me how to load the stock rom.?.
Thanks...
Click to expand...
Click to collapse
Tink already provided you a link to the rom in this thread.
If that is to far above your head then you really should read a lot more before trying to flash a phone.
Here is a basic flashing thread for doing it without a pc. Link
Or the thread here.
wizardknight said:
Tink already provided you a link to the rom in this thread.
If that is to far above your head then you really should read a lot more before trying to flash a phone.
Here is a basic flashing thread for doing it without a pc. Link
Or the thread here.
Click to expand...
Click to collapse
I loaded the stock rom successfully. But this ROM consume the battery fast (the battery life is 4 hours without using the phone) So i want to change the ROM.
mstfysn said:
I loaded the stock rom successfully. But this ROM consume the battery fast (the battery life is 4 hours without using the phone) So i want to change the ROM.
Click to expand...
Click to collapse
Good job! I am glad that it is working for you now! That is strange that the shipped rom is having such a negitive impact on your battery life. Feel free to flash one of the many custom Rom's that are freely available. Have a blast out there!! =]
TinkerbeII said:
Good job! I am glad that it is working for you now! That is strange that the shipped rom is having such a negitive impact on your battery life. Feel free to flash one of the many custom Rom's that are freely available. Have a blast out there!! =]
Click to expand...
Click to collapse
Thank you very much for your help. i read this post http://forum.xda-developers.com/showthread.php?t=550540 and i made a request for "Rhodium Hard-SPL" in the site http://support.htc-unlocks.com and i am waiting for their reply.
Thanks very much for your help. Really you are very good people. and i am happy for your assistance...
mstfysn said:
Thank you very much for your help. i read this post http://forum.xda-developers.com/showthread.php?t=550540 and i made a request for "Rhodium Hard-SPL" in the site http://support.htc-unlocks.com and i am waiting for their reply.
Thanks very much for your help. Really you are very good people. and i am happy for your assistance...
Click to expand...
Click to collapse
Did the unlocking program not work for you? If that is the case then you will have faster feedback if you email the addresses listed on the error screen of the unlocking program.
wizardknight said:
Did the unlocking program not work for you? If that is the case then you will have faster feedback if you email the addresses listed on the error screen of the unlocking program.
Click to expand...
Click to collapse
I used the Hard SPL mentioned in the post "Rhodium-HardSPL_V2_00R3.exe" and after activesync successfully done the Hard SPL gives me an error on the PC "[error 260: connection]" and the phone give me a warning "This package is not intended for your device type!!! High chance of bricking!!! Exiting now".
how to solve this problem.
Thanks...
mstfysn said:
Thank you very much for your help. i read this post http://forum.xda-developers.com/showthread.php?t=550540 and i made a request for "Rhodium Hard-SPL" in the site http://support.htc-unlocks.com and i am waiting for their reply.
Thanks very much for your help. Really you are very good people. and i am happy for your assistance...
Click to expand...
Click to collapse
Awesome! You are welcome for the help. Remember that your device is a RhodiumW and not a Rhodium. The post that you linked to there first was for a Rhodium. The process is similar though. You can read about the process here for your device. Also, you can download the unlocker at:
hspl-unlocker-rhodium-w-hardspl-rhodiumw-hardspl_v1_10r3_100hspl.zip
TinkerbeII said:
Awesome! You are welcome for the help. Remember that your device is a RhodiumW and not a Rhodium. The post that you linked to there first was for a Rhodium. The process is similar though. You can read about the process here for your device. Also, you can download the unlocker at:
hspl-unlocker-rhodium-w-hardspl-rhodiumw-hardspl_v1_10r3_100hspl.zip
Click to expand...
Click to collapse
Thank you very much. Now i run the RhodiumW-HardSPL_V1_10R3.exe and it is successfully run. So what the suitable ROM can i load for my phone. Please, Remember that my device is RhodiumW not Rhodium.
Thanks
mstfysn said:
Thank you very much. Now i run the RhodiumW-HardSPL_V1_10R3.exe and it is successfully run. So what the suitable ROM can i load for my phone. Please, Remember that my device is RhodiumW not Rhodium.
Thanks
Click to expand...
Click to collapse
It sounds like you have a CDMA TP2. I would sugest that you read the forums at PPC they focus more on CDMA roms.
http://forum.ppcgeeks.com/cdma-tp-development/
Now I would sugest the Energy rom myself. Lots of people like it. I am running an android rom, but I would sugest you get the hand of WM first. You can run the android rom from and SD card, but if you want to load it from internal nand memory it is much more complicated.
+1 Wizardknight. I would check out these two threads for two excellent Roms:
Energy Rom
Sharkie405 Rom
You are welcome for the help. Thank you for the 'Thanks'. =]
TinkerbeII said:
+1 Wizardknight. I would check out these two threads for two excellent Roms:
Energy Rom
Sharkie405 Rom
You are welcome for the help. Thank you for the 'Thanks'. =]
Click to expand...
Click to collapse
Thank my friends . Now iam downloading ENERGY.HERMAN.29022.sense2.5.Cookie.2.0.jul.04 ROM. I hope it will installed successfully on my device and solve the battery negative issues related to stock rom.
pray for me.
Thanks...
mstfysn said:
Thank my friends . Now iam downloading ENERGY.HERMAN.29022.sense2.5.Cookie.2.0.jul.04 ROM. I hope it will installed successfully on my device and solve the battery negative issues related to stock rom.
pray for me.
Thanks...
Click to expand...
Click to collapse
You don't want the Rom for Herman, you want the Rom for RhodiumW... let me see if I can find a copy here.
Failed. It gives me error message [error 244]: invalid model ID.
how ca i solve it?
Best Regards..
mstfysn said:
Failed. It gives me error message [error 244]: invalid model ID.
how ca i solve it?
Best Regards..
Click to expand...
Click to collapse
That is because you are trying to flash a Rom not intended for your device.

Categories

Resources