Anyone has problems with 4.01.16? - Upgrading, Modifying and Unlocking

Hello,
I have tried this version and have serious problems - it seems it does not support my band 900/1800 and the Phone part of my XDA (Radio v.4.21) does not work. It is amazing because few minutes before it goes to hell it worked fine... Anyone can help me? Pleeeeaseeee

That's because it's for 900/1900 band phones. not 1800

Have you tried, entering bootloader, and set the gsm part manually to 900/1800 ???
Some peolpe reports, that their devices are set to 900/1900 after upgrading...
HTH
Stefan

How can I do that?

lumpi for future - please write which rom is for which band please

wuffi said:
lumpi for future - please write which rom is for which band please
Click to expand...
Click to collapse
Normally the ROM is not specified to a special band, so i can´t write it...
Stefan

lumpi please how to get to the bootloader and set the band?

wuffi said:
lumpi please how to get to the bootloader and set the band?
Click to expand...
Click to collapse
Take a look at http://wiki.xda-developers.com/wiki/ChangingBandsWithBootloader
All here at the site....

Hold power while inserting stylus in soft reset hole, once bootloader appears press the key below the antenna, choose from this menu.

yeah, changing the band in bootloader helped!!!! SO WARNING FOR FUTURE USERS!!!! DO NOT GO TO THE BAND CHOOSER MENU IN THIS ROM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (UNLESS U HAVE 1900 phone¨)
or for those having the same problem - in bootloader press calendar icon use the down button to go to GSM900/1800 and then press it again. wait until the bootloader reboots the device.... aaaand u.r. on the gooooo!

Italian Rom
Question to Lumpi:
Have you got also an adress where I can find romkitchen for an italian Rom for a Qtek 1010?

Related

i want original rom for T-mobile mda to be used on 900 freq

hi everyone
i want original rom for pw10b1. i ve installed special edition rom v1.1 but signals are not coming as it shows pw10a1 in device information and also gives me error while upgrading radio stack to 6.24.20. it is urgent plz
Installing special edition rom should not affect signal as it doesnt address the radio stack. Have you looked in bootloader to make sure 900/1800 is chosen in gsm.
Push reset button while holding power button, then push button below antenna, choose from there. Was the signal ok before installing the rom?
Thank u very much
That band selection process was in the bootloader and i didn know it. i selected the band from there and signals are alright now. Thank u once again for such a kind help

HKC G1000

Hi!
Does anyone know where to find ROMS for HKC G1000 (DUAL SIM WM6)?
Many thanks!
i have one. they sent it to me coz i complained about noise being picked up by phone1. tried reflashing, but still the same problem.
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
THOMYROS said:
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
Click to expand...
Click to collapse
There is Icon with green tree in Settings menu - search for it!
Hkc G1000 hard reset
Hi,
i have the same problem, i have installed a program now the phone is blocked in the windows boot up screen.
Did you solve the problem?
Could you help me please?
Thanks
try this
3 key press together for re-start:
G2 (Dial sim card 2 key) + Camera key (on the right side, near the on/off key) + on/off key.
9rinder said:
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
Click to expand...
Click to collapse
hi, can i have it? please provide a link for download. thanks... hopefully it will solve my noise problem on phone 1. thanks...
can you post your rom versions?
mine is Under Device Information: WM6_HKC_G1000_VER_07
Hkc G1000
Thank you very much Pranix,
it worked ,
but only after take off the battery for 15 min. and with G1 button at place of G2.
I'm also interested to have the Rom (just in case
If you can provide a link it will be much appreciated.
mine is:
ROM: WM6_HKC_G1000_VER_07
RADIO: PPC_DMDC_RIL_01.01
PROTOCOL: W8.5P8.4
DRAGONFLY: DV17-MODULE-VER-07.12.2
Just a curiosity: this pda it supposed to have 64 Mb of ram, but on "about" i read only 43,74 Mb,
it's your the same or not?
Thanks again
we have the same version.
http://uploading.com/files/G05UZJ16/HKC G1000.rar.html
hopefully someone here can modify and update it to wm 6.1
how's the sound quality of your phone?
i have a problem with phone 1, it picks up alot of ambience noise.
difficult to hear the other person you're talking to.
if you put your hand over the mouthpiece, and also the earpiece, it creates a feedback sound.
no problem on phone 2.
Hkc G1000
Hi Pranix,
thanks for the rom file after i'll ask you how to flash it.
My phone works good both sims, your, sounds to be an hardware
problem, since you told that you have flashed the rom.
The set of the microphone for the sim 1 is too sensible, and when you put the hand on the micro, it cause what is called "larsen effectc", that happend when the sensibility of the microphone is too high and trigger a feedback from the earphone that cause an annoying whistle .
In an italian forum, I heard about an engineering code to write down in the
china phones with WM6, that allow you to set some hardware features
of the phone including the sound level, I don't know if this is possible also with our phone. but it worth a try.
I'll go to ask in the forum and if pertinent, i'll post you the answer.
Bye
hi,
the procedure to flash is in the rar file that i have uploaded.
just open the text file.
hope you can find some way to minimize the sensitivity of microphone setting for phone 1.
regards,
pranix
Hi Pranix,
he say that the code "engineer mode" it is available only on the china phones with the RTOS operating system, and in some motorola and Nokias,
but he say that maybe it is possible to change the parameters set on the windows registry, with a pc program like CeRegEditor.
Connect the phone to the pc, start CeRegEditor, make it read the registry, click on unlock (if not you can't save the changes), after that you have to look where are located the keys regarding the audio, and see if modifiyng the key value you can solve the problem.
I will look further if i find some else solution
good luck
i already tried editing registry however still the same.
maybe i was editing the wrong registry. hehe
i just hope that 9rinder gets to post his rom here
Pranix said:
i just hope that 9rinder gets to post his rom here
Click to expand...
Click to collapse
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
9rinder said:
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Click to expand...
Click to collapse
hi,
can you post your rom details?
i downloaded the rom, it seems your rom & my rom are the same.
i checked the date & time stamp, its identical.
i also asked my contact at hkc, still no new rom since i asked for it sometime june.
how's the audio quality on your phone 1 & phone 2?
can you hear the calling party clearly?
oxyjo said:
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
Click to expand...
Click to collapse
i've actually tried editing those registries before however still the same.
the question here is that do we have one or two mircrophones?
coz if only one, then there must be a setting somewhere to adjust phone 1 & phone 2. phone 2 sound is better than phone 1.
if two microphones, i cant find the settings as there is only one setting to tweak.
Hello. I have one of this PDa.
Mine has this ROM:
ROM version:WM6_SITRONICS_SD106_VER_05
Radio version: CYNTHIA850_DMDC_RIL_01.01
Protocol version: W8.5P8.4
Dragonfly Version:CYNTHIA850 TF-DV17-MODULE-VER-07.16 Feb 18 2008 13:02:06
Do you recommend me to update?
Is any way to "extract" its original ROM?
And is any way to "edit" any of your roms to change the language of the OS?
Thanks

Softbank X04HT ROM (USIM nag screen removed)

Hi,
I cooked my first rom of Softbank X04HT with annoying USIM nag screen removed.
*** This ROM includes OS only ***
For unlocking issue, please see here:
http://forum.xda-developers.com/showthread.php?t=414835
Other Mods:
- Sample Pictures, Wallpapers, Videos and Musics (.wmv) have been removed from the rom.
I didnt do many mods on this rom.... because I don't know how to...
Other Mods that I want to do if someone can help me:
- Remove all the default weather location (not from the full list, but the selected cities)
Finally, for people who want the mods, please PM me and keep the link for your own use. And don't forget, this is my first cooked ROM (by newbie) and use it as your own risk.
Thank you.
so it has all the jap imes?
how do we try this out?
can other coutry' diamond use this rom?
I think so... you can send me msg to have a try
send me PM and I will send you the link if you want to try.
This rom can be uesd on my diamond.my diamond is Traditional Chinese verson.
it can run,but can not make a call .
hailin.yu said:
it can run,but can not make a call .
Click to expand...
Click to collapse
I have tried this ROM too, thanks to Sky Man:
1) yes it can run on any CID unlocked Diamond
2) yes it can make calls. I had exactly the same problem at first. You have to go to the phone/band settings: by default, it's set on 3G only. U've got to change this according with the service available where you live (automatic, GSM, try and see which setting works better for you)
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
riri22 said:
I have tried this ROM too, thanks to Sky Man:
1) yes it can run on any CID unlocked Diamond
2) yes it can make calls. I had exactly the same problem at first. You have to go to the phone/band settings: by default, it's set on 3G only. U've got to change this according with the service available where you live (automatic, GSM, try and see which setting works better for you)
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
Click to expand...
Click to collapse
thanx,now i can use the phone.
riri22 said:
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
Click to expand...
Click to collapse
Thanks for your message.
There could be a chance that your radio doesnt work with my ROM (actually, the rom from Softbank). Since I didnt do any tuning or mods on the settings, and I have no problem of using the ROM, therefore, I guess the problem could be radio (Im just gussing)
Other people who used this rom pls comment on it ~
Thanks!
Sky Man said:
Thanks for your message.
There could be a chance that your radio doesnt work with my ROM (actually, the rom from Softbank). Since I didnt do any tuning or mods on the settings, and I have no problem of using the ROM, therefore, I guess the problem could be radio (Im just gussing)
Other people who used this rom pls comment on it ~
Thanks!
Click to expand...
Click to collapse
thanks you for your rom. may i know your using radio is what? i didn't meet the sleep problem,but it often doesn't answer. i dont know why, maybe the Chinese ime i installed?
hailin.yu said:
thanks you for your rom. may i know your using radio is what? i didn't meet the sleep problem,but it often doesn't answer. i dont know why, maybe the Chinese ime i installed?
Click to expand...
Click to collapse
Im using SPL-1.40.OliNex
Sky Man said:
Thanks for your message.
There could be a chance that your radio doesnt work with my ROM (actually, the rom from Softbank). Since I didnt do any tuning or mods on the settings, and I have no problem of using the ROM, therefore, I guess the problem could be radio (Im just gussing)
Other people who used this rom pls comment on it ~
Thanks!
Click to expand...
Click to collapse
My Radio: 1.09.25.23
My SPL: 1.93 Olinex
SKy Man san,
great!
Thank you very much. your ROM is very good. have not discovery any problem.
BR
ylyu
Dial up connection
Hi, this ROM works well except softbank dial-up connection. It seems that this ROM doesn't have any connection setting. Do you know how I can restore softbank connection setting? (I'm using softbank USIM)
htakahasyd5 said:
Hi, this ROM works well except softbank dial-up connection. It seems that this ROM doesn't have any connection setting. Do you know how I can restore softbank connection setting? (I'm using softbank USIM)
Click to expand...
Click to collapse
After you flash the rom, the softbank setting should be already there and you cant do any modification on it... Im using the same rom with softbank sim card.
i cannot use the Dictionary and the word game.
is the rom missing sth?
calkelvzeee said:
i cannot use the Dictionary and the word game.
is the rom missing sth?
Click to expand...
Click to collapse
the additional data is in the cd-rom which comes with the phone when you buy it. it's not in the rom, and you have to install the data from the cd-rom.
Why does Japanese roms only say 3G and not H? The Japanese ROM i tried only had 3G, but all the wwe roms I tried show H.
riri22 said:
I have tried this ROM too, thanks to Sky Man:
1) yes it can run on any CID unlocked Diamond
2) yes it can make calls. I had exactly the same problem at first. You have to go to the phone/band settings: by default, it's set on 3G only. U've got to change this according with the service available where you live (automatic, GSM, try and see which setting works better for you)
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
Click to expand...
Click to collapse
i'm trying the x05ht rom in the US on my HTC FUZE(Raphael) but i seem to have the USIM nag on mine too. i was wondering how you removed it from the x04ht rom? maybe you can remove it the same way on the x05ht rom too? i greatly appreciate it!! thanks!!

[Q] Korean Version SHV-370K - ROM/GroupPlay/ChatON

Hey people,
I recently purchased a Korean variant of the S4 Mini. The model is SHV-370K. To my findings, its equal to the main version I9195. Is that correct? I do have the NFC chip installed. My question is, can I flash an official ROM like the ones used in the I9195? I have to much KOREAN language apps and I dont think I am prepared to root it. If I can flash an official ROM on this via ODIN?, will I still be able to get the OTA? My current version is 4.2.2. And checking on Sammobile I have the latest. The Korean stuff is just to much of a hassel and I am not sure if I will even get an update. Can I flash an official ROM and not lose warranty and root?
My second question is that I cannot make Group Play work on 2 of these S4 Mini's. They just dont connect. It says Network Lost and sometimes failed to join group. I've tried working it over with NFC and Wifi Direct. Normal gallery pictures and everything send easy, just this app that I really really want to use. Would be great if some one would help me.
My last question is that ChatON keeps giving an Error while checking for push services. I have tried everything. Changed networks, tried Mobile Networks. All my apps are up to date, even the annoying Samsung Push Service. Any help would be greatly appreciated.
Thank you so much people.
Have a great day.
Oh and I think its Carrier Branded? Cuz it has this Olleh writen on its back cover?
So ChatON and Group Play is working after they have been updated most recently. I did update them before but they dint seem to work. The current updates work good. Any one about the ROM issue? Would love some help <3.
ThuGzta said:
So ChatON and Group Play is working after they have been updated most recently. I did update them before but they dint seem to work. The current updates work good. Any one about the ROM issue? Would love some help <3.
Click to expand...
Click to collapse
you can only use a korean K rom, or a modify rom for the K version, otherwise you can brick your phone.
kms108 said:
you can only use a korean K rom, or a modify rom for the K version, otherwise you can brick your phone.
Click to expand...
Click to collapse
But isnt the offical ROM like France one flashable on this phone? The K Rom. Hmmm.
ThuGzta said:
But isnt the offical ROM like France one flashable on this phone? The K Rom. Hmmm.
Click to expand...
Click to collapse
you can try it.
kms108 said:
you can try it.
Click to expand...
Click to collapse
Eeek. I would like something for sure. Will continue my research. Thank you so much for replying. Would love some other opinions too, would be a great help for me.
Hi guys,
Have you found any solution to this problem? I'm also an [almost] happy owner of a Korean-branded S4 Mini and as USSD codes don't work, was told that firmware needs to be changed. But this being specifically a Korean phone, I'm not sure other ROMs out there will even be 100% compatible.
Thanks,
Vit
ervit said:
Hi guys,
Have you found any solution to this problem? I'm also an [almost] happy owner of a Korean-branded S4 Mini and as USSD codes don't work, was told that firmware needs to be changed. But this being specifically a Korean phone, I'm not sure other ROMs out there will even be 100% compatible.
Thanks,
Vit
Click to expand...
Click to collapse
you have to enter it's secret menu, and insert the password, each network has it's own password.
kms108 said:
you have to enter it's secret menu, and insert the password, each network has it's own password.
Click to expand...
Click to collapse
Thanks, but I don't think I have to enter a password, since other phones work without it. Unless it's somehow phone-specific, but my operator reps would probably have told me (instead they just said the firmware needs to be changed). What secret menu are we talking about? perhaps aI could investigate. At any rate, if there someone has managed to flash the Korean version of the phone with a more "universal" firmware, I'd like to know. Thanks!
ervit said:
Thanks, but I don't think I have to enter a password, since other phones work without it. Unless it's somehow phone-specific, but my operator reps would probably have told me (instead they just said the firmware needs to be changed). What secret menu are we talking about? perhaps aI could investigate. At any rate, if there someone has managed to flash the Korean version of the phone with a more "universal" firmware, I'd like to know. Thanks!
Click to expand...
Click to collapse
This secret menu allows you to modify the network, frequencies and other stuff, each korean service privider has it's own password.
try typing this on the dialer.
319712358
kms108 said:
This secret menu allows you to modify the network, frequencies and other stuff, each korean service privider has it's own password.
try typing this on the dialer.
319712358
Click to expand...
Click to collapse
it asks for a password. I tried 0821 but it doesn't seem to work
ervit said:
it asks for a password. I tried 0821 but it doesn't seem to work
Click to expand...
Click to collapse
the password is network related
kms108 said:
the password is network related
Click to expand...
Click to collapse
I found the password on a Russian forum, it's 774632. But I don't see where in that menu I can enable USSD
ervit said:
I found the password on a Russian forum, it's 774632. But I don't see where in that menu I can enable USSD
Click to expand...
Click to collapse
you don't need the menu for the ussd, korean version has their own set of ussd, they are different from the international version, some are the same , but most are different.
kms108 said:
you don't need the menu for the ussd, korean version has their own set of ussd, they are different from the international version, some are the same , but most are different.
Click to expand...
Click to collapse
Please forgive me as I'm a total noob, but after your last reply it hit me: we're probably talking about different USSDs. I meant that my operator USSD codes didn't work, the ones that I send to find out my remaining balance and to also enable/disable services etc. (e.g. I would send *444#2#1 to find out my remaining balance), not the phone's own USSD codes (like the service menus etc, e.g. the IMEI check with *#06#). Operator USSD codes just don't work - the phone either sits trying to connect for a few minutes (locking the phone down during this time), or just says that the signal is too weak. So I guess I do need to install a different firmware to fully unlock it.
Thanks for trying to help though, I'm learning new stuff!
ervit said:
Please forgive me as I'm a total noob, but after your last reply it hit me: we're probably talking about different USSDs. I meant that my operator USSD codes didn't work, the ones that I send to find out my remaining balance and to also enable/disable services etc. (e.g. I would send *444#2#1 to find out my remaining balance), not the phone's own USSD codes (like the service menus etc, e.g. the IMEI check with *#06#). Operator USSD codes just don't work - the phone either sits trying to connect for a few minutes (locking the phone down during this time), or just says that the signal is too weak. So I guess I do need to install a different firmware to fully unlock it.
Thanks for trying to help though, I'm learning new stuff!
Click to expand...
Click to collapse
Mate I have the same problem here. The USSD codes just dont work. My balance check does work though. All I have noticed that USSDS that need two steps dont work. Example to transfer credits, I type *456# and in return it should ask me what number I need to transfer my credits, but it just doesnt work. I have tried the menu but no idea what that is all about. Still cannot find what to do.
Secondly I met some one at the forums who has the same device as ours. HE said installing Cynogen Mod is working and it doesnt effect us having a model of SHV something. LOL. So I dont know if I should go ahead and flash a custom rom. I would rather flash an official rom but no one is helping here and I cant seem to find any. Like maybe we could flash an english rom from UK. Something official like the normal I9195 have! Not some korean ones.
New Update.
Hey people! I just got an OTA update and all I see new is a Google Drive icon. The update is still on 4.2.2 and not 4.3. It was about 96mb of file size. How can I take out the changelog and read what bug fixes it brings?
hello
how to do I move from SHV or change the CSC code?
for now getting only the Korean pop up messages.
Want to change to Australia CSC code.
deepudips said:
how to do I move from SHV or change the CSC code?
for now getting only the Korean pop up messages.
Want to change to Australia CSC code.
Click to expand...
Click to collapse
I've read about CSC Select app (on google play market), but I think you need root for this to work. I'm not an expert on that though.
Please write here if you manage to get any results (even if negative).

[Q] Radio chipset

Hello,
How can I localise the radio chipset on the bord ?
best regards
If you mean radio (gsm), it's located in Qualcomm SoC (processor, radio, etc... in one chipset).
Why do you need location?
What is problem?
Hello,
T thought that it was a separated chipset
I can't make a call
When I dial a number, it opens the screen calls it "call in progress" then 2 seconds after it cut "End Call".
However, the 3G connection works.
Best regards
Did you try to change settings?
http://androidforums.com/desire-hd-support-troubleshooting/296826-htc-desire-hd-call-problem.html
http://androidforums.com/htc-desire/155297-cant-send-recieve-calls-texts.html
Hello,
Yes I tried every things in sittings menu, I tried another reader SIM card, The same SIM card works correctly with another DHD, I tried a custom ROM, I tried another flex cable.
NO changes
Did you try to turn off wlan and try it again?
Or to turn off 3g?
If you use custom rom you don't now nothing because they can have a problems for some devices.
The best rom for testing is the latest stock shiped wwe ROM installed from ruu (not from hboot).
You can download it from here:
http://shipped-roms.com/index.php?category=android&model=Ace
Hello,
I do flashing the RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe,
before doing a custom rom install.
I do several tests without 3G nor wifi.
I tested the *#*#4636#*#* : phone information to fix GSM only.
I am in test with a stock rooted rom (DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00.zip), I have all time the same result : no calls in or out possible
Thanx
Did you try this?
http://ma.juii.net/blog/manual-htc-desire-hd
TF85 said:
Hello,
How can I localise the radio chipset on the bord ?
best regards
Click to expand...
Click to collapse
Unsupported bands? Mine worked in all of the places I've been in Europe.
Just to make sure try a different SIM ( with different network - preferably 2G sim as most 3G cause haywire. )
If not then flash a radio FOR WWE as it may be outdated.
Sent from my HTC One using Tapatalk
XDA_h3n said:
Unsupported bands? Mine worked in all of the places I've been in Europe.
Just to make sure try a different SIM ( with different network - preferably 2G sim as most 3G cause haywire. )
If not then flash a radio FOR WWE as it may be outdated.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I don't understand why people don't read the whole thread. It's just 8 short posts.
This turns out that you write something just because you have to.
But you aren't the only one. And that's sad.
Gussta said:
I don't understand why people don't read the whole thread. It's just 8 short posts.
This turns out that you write something just because you have to.
But you aren't the only one. And that's sad.
Click to expand...
Click to collapse
Well, to be honest tapatalk sends me to the first unread post; therefore I couldn't read the post that you flashed a WWE RUU.
However, I'd think you should flash a radio specific to your region as their could be difference to the WWE. But I don't know if this would work as they're device dependent? But it's worth a shot.
Though, accordingly to your posts you've tried many software troubleshooting and checking the flex cable. I wouldn't know anything else...

Categories

Resources