Related
Hi All,
I can't decide which case to get for my XDA EXEC.
I would like to use it on my belt occasionaly, so one with a belt clip or loop would be preferred.
From your experiences, which case is the best to go for ?
Thanks.
The t-mobile 6315 case is the best I tried until now (my 3rd for the Universal). It is a holster type, as in, you carry it on your belt and take the Universal out to use it.
It is a surprisingly good fit, and it is very easy to take the device out and put it back in, at the same time, it is very safe when it is sitting on your belt.
The guy I bought it from at ebay has 2 left
http://cgi.ebay.com/NEW-HP-iPAQ-OEM...840044486QQcategoryZ15036QQrdZ1QQcmdZViewItem
And it costs you 1/4 of anything else you are going to buy out there.
Doesn't look like he ships to the UK though !
Does size matter?
atekant,
I looked up the dimensions of the iPAQ 6315 and compared them to the JasJar. Here they are:
iPAQ JasJar
118.872 mm 127.7 mm
74.93 mm 81 mm
18.542 mm 25 mm
So based on the demensions posted by HP and imate, the JasJar is larger than the 6315. Since I'm used to seeing demensions in inches/feet, I have no idea if these differences are significant. Do you find that the case is too small? Did you have to modify it? Because if not, I may end up purchasing one from www.casesonline.com, but get a slightly different color combo than the one you found on ebay. Thank you for any help.
This same guy has 52 under a different listing, very quick delivery BTW.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5771486213&category=15036#ebayphotohosting
weather, the fit is perfect, not tight and not loose, the Uni just goes in & out easily, yet the clip is tight on the belt. This is actually near identical to the HP case (larger one) selling for U$49 retail.
weatheryoko
I had the same questions when ordering it, and I was quite sure it would end up being too tight, but it is not tight at all.
The front, back, and the flip cover (with magnetic closure) is leather (I mean fake leather like substance, but not bad). The bottom, and the sides are elastic bands (about 1 inch wide) and have enough give to let the Universal slide in, and at the same time hold it tight enough.
You flip open the top and the case opens like a change purse would so you can slide your fingers in to grab the device.
I have stopped looking for a case for the Universal, that is how happy I am with it.
Thank you both....
Wow, that was a fast reply. Thank you. It sounds like I may the specific case that you bought (with the elastic bands on the side). So I might hold off on buying the one from casesonline. One last question..... Is there a slot to hold SD cards? Thanks again.
Has 2 slots. Go for it, best $12 I ever spent
I got mine yesterday. First when I open it, I felt as it seems it was made from not such a high quality material.
But when I try to use it, I was extremelly happy.
It was indeed made for the Universal! It fits very well, and very comfortable to put in the Universal and take it out. The belt clip is very nice as well. Finally, I reach the point where I can stop hunting for a perfect case for my Universal. I have tried few before: the original case that I modified with a belt clip, the metal case, and a PDA keyboard case. And this one is the best and I'm going to use it with my Universal from this point forward.
I feel upset with imate or HTC though, if they can sell a device with $1000 price, they should be able to include such a perfect case that only cost $5.
I guess this case is just perfectly made for Universal.
Some pictures of this case
Here are some pictures of my Universal case for the benefits of all of you. Like I said, it simply fits the Universal nicely. Look at the bottom cut, this allows you to take out the Universal easily. And I have no more problem with the stylus flying out when pulling the Universal out of the case (the problem with the original Universal case). Best value for the price ($5 plus tax and shipping, around $14) that you can get.
Does it have a belt clip or a belt loop? You missed taking a picture of the back. Please.
Hi,
strange that there is - still - no separate "carrying case" with a holster available for the i-mate JASJAR / Qtek 9000 other than cases offering complete insertion of the device thus being forced also to work with the device inserted.
Good news:
Expansys will be offering one, watch out here
http://www.expansys.com/product.asp?code=125516
Bad news:
It is EUR 53 here in Europe, which is quite a lot :-(
Second: Expansys is not really renowned for keeping the price it announces before availability of product, neither do they keep dates of delivery. (This product was first announced as "available before Christmas", then 23 Dec., then 2 Jan., now 6 Jan. in Europe, which is a public holiday in many countries here...)
Expansys says the manufacturer is "Premier Systems", though Google does not seem to know a manufacturer under this name.
Obviously this is just some fantasy brand producing for Expansys ???
Does anyone know who is producing this case or hides behind "Premier Systems" ?
(Strange enough that none of the big case manufacturers: Covertec, Krusell, ... offers such a case for the device.)
As my last PDA was an iPAQ 4700, for which I purchased the original holster case, I tried it out for my Qtek 9000 (identical with the im-mat JASJAR).
Almost fits perfectly
(Bad: Now my iPAQ, which is still a cute device, however lacking GSM connectivity, is "naked"...)
The 6315 is similar in size to the hx4700 afair, though I never saw the case one guy described here (attached photos a few posts downwards).
Ok, there we go. The back of the case.
Its a belt clip, not a loop. Very comfortable, its not moving around, not too lose, not too tight, just perfect.
Originally I was thinking to buy that XaX case as well, but its too expensive ($50?) and there is an opening on top intended for the headphone, but I dun like it considering if there is a rain drop into it, that's it.
Ok, there we go. The back of the case.
Its a belt clip, not a loop. Very comfortable, its not moving around, not too lose, not too tight, just perfect.
Originally I was thinking to buy that XaX case as well, but its too expensive ($50?) and there is an opening on top intended for the headphone, but I dun like it considering if there is a rain drop into it, that's it.
Thanks very much for the pictures.
Piel Frama - sweet!
my piel frama case just arrived in the mail today - very nice!! it retails for around €60 - or you can buy it brand-new on ebay for €40like i did
here's the link, i'll see if i can attach some pics as well!
http://cgi.ebay.de/Piel-Frama-Leder...841638524QQcategoryZ38994QQrdZ1QQcmdZViewItem
merry christmas
dennis
and here's another picture - this case covers the keyboard (on my old psion a few of the keys were rubbed blank from usage, and i've seen that problem reported on mda III's as well. plus you can leave the device in the case while using all t's features! :lol:
Hi all, does anyone know where to get T-Mobile case in Europe?
Thanks
t-mobile case
@stric
if you are talking about the case that came with the original mda profrom t-mobile, you can have mine, if you cover s&h! let me know if you're interested!
merry christmas
dennis
Hi, no I ment the case for HP 6340 which is being sold on ebay (but only in USA ). Thanks anyway.
Marry christmas and happy new year to all of you
what do you guys think?
I just got one and it fits wicked !
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=9704622961&rd=1&sspagename=STRK:MESE:IT&rd=1
I purchased the same item last month, its branded T Mobile, but a good fit. It has elasticated sides so would probably be suitable for other PDAs, I can also use it for my Sharp Zaurus SL-C760.
You may want to shop around on eBay as I purchased from a US seller for £7.99 including delivery although it took 3 weeks to arrive.
Mike
yeah I realised that these ones were a little more expensive but they are in the UK so easier to trace etc. and plus mines arrived next day, so I was well happy
In North America?
Does anybody know where I can purchase a leather case like this one in North America?
I've been looking for a case for my Universal that is the same as the Qtek case. Not a skin but a belt holster that has a magnetic clip for closing but the Universal slides out completely when taking it out of the leather case -- oriented on your belt horizontally.
Is this what you're looking for?????
http://cgi.ebay.com/NEW-LEATHER-CAS...708156343QQcategoryZ15036QQrdZ1QQcmdZViewItem
This is the one I use for my JasJar. Great carrying case. I purchased mine from this seller (In fact I bought two). Works great. Good seller. JasJar fits right in.
Best deal in my opinion.
Good luck.
Take a look at this company, the Brando cases are considered one of the best cases to buy.
Flip Case
http://shop.brando.com.hk/bwdopod900leathercasef.php
I've bought 4 of my cases over the years from this company, although they are based in Hong Kong I have never had any problems with the service.
The delivery has always been within a week to the UK. I bought the side opening case last week from them and I'm very pleased with the quality
Side Case
http://shop.brando.com.hk/bwdopod900leathercases.php
Hope this helps.
I have to agree about BRANDO. I have bought several cases from them and they have always been very fast at delivery and courteous. Once i had a faulty case and after an email and photo of the problem they immediately replaced it!
Their screen protectors are also amazing, ive been using them on an A920, A925, A1000, SX45 and now my Exec.
The case from the first post is EXACTLY like the case that cme with my HP Ipaq H6340. I used it for a while until i hanged it for a krusell.
If any of you guys want a source and dont trust ebay, try HP.COM and look in accessories for the H6340/6315
Brando end-latch case
Actually, I ordered the Brando case that opens lengthways. It's not too bad, some small alignment issues with the openings in the leather...
I just realized that I like the JasJar without anything attached so I'm looking for cases that it's slides out of completely. Maybe I'll get a silicone skin for it so it's more tactile but after using my Brando case for awhile, I definitely want one that I can remove the JasJar from completely.
I must admit, the Brando case looks nice and feels good other than the alignment issue. Delivery was fast and service was good.
What I'm after is a nice holster style case like this one from Sena. Does anyone know if a JasJar will fit into this case??
Cynic64 said:
What I'm after is a nice holster style case like this one from Sena.
Click to expand...
Click to collapse
You might find the Krusell Horizontic case suitable, but you'll need a PDA Large (code 94108 or 94113) and they're a bit of a dog to get hold of in the UK.
Brando vs Krusell
Yeah, I'm in Canada having real issues finding a distributor that carries the Krusell case.
And why am I looking for the case after buying a Brando?
Because the Brando sucks. After the second plunge to the concrete that my JasJar took because the metal screw holding it to the swivel swivelled right out (!), I've given up on the Brando.
It's crap. Your better to go with another case. Speaking from experience and one scraped up JasJar.
Re: In North America?
Dan Feeny said:
Does anybody know where I can purchase a leather case like this one in North America?
I've been looking for a case for my Universal that is the same as the Qtek case. Not a skin but a belt holster that has a magnetic clip for closing but the Universal slides out completely when taking it out of the leather case -- oriented on your belt horizontally.
Click to expand...
Click to collapse
Check this out. Says they ship to the USA but not sure where they are based. I have this case myself and it is very good.
http://zxpro.com/catalog/product_17...00_Holster_style_Case_Horizontal_cat_681.html
Dave...
the best Ive seen to date is the Piel Frama... expensive, but you get what you pay for ;-)
I've notice a lot of these cases for the universal, the edges are actually expose. You drop your universal and an obvious damage will be visible. The case that came with my Exec was crap, so as the other cases from O2. i have to agree, Piel Frama is the best one i've seen and the price is pretty quite expensive. :?
I have to say, I have a Krussell Leather 'Bikini' model with swivel belt clip which does the job perfectly for me. And I've dropped my M5000 numerous times with no damage even thought there is a lot of exposed casing... only problem is the stylus and SD card shoot out when dropped, I'm on my 4th stylus @ £5 a pop and 3rd 1GB SD (Glad the SD card prices have dropped!)
Hi,
What case do people recommend to keep their Orbit safe? I'm stuck between the Krussell (which I have protected phones with before) , a silicon case (ebay item number 160068404562) or PDA Leather Flip Case (ebay 160068463414).
I'm tempted for the silicon as you still have easy access to the screen , but welcome any other ideas.
gavinlew said:
I'm tempted for the silicon as you still have easy access to the screen , but welcome any other ideas.
Click to expand...
Click to collapse
Before reading your question, I was not aware of the existance of a silicon case for this model. Now I've looked it up at Ebay and am also interested. A couple of months ago I bought a silicon case for my mp3 player (different brand though, ZCover) and am very pleased with it. So far however, the seller seems only to ship within the UK. I have just asked him by email if he is able to ship abroad, no answer yet.
Update: he does sell abroad. Apparently he has more than one item on Ebay, all about this case but with different shipping methods. Anyway, I just ordered a black silicon case, due to arrive later this week. I will let you know.
hi
i have the PDAIR flip case and am very pleased with it. i prefer it to a silicon type as it gives the screen more protection.
I agree that a flip case does give more protection, especially to the screen, but isn't it annoying when actually making a call? I presume you don't take the phone out of the case before calling. To me it looks rather silly. NOFI.
Have a look for the aluminium (on ebay, under artemis/p3300) case for the artemis as I have just ordered one and hope it is a good fit for the orbit?
Not massively protective but the slipcase supplied with the 8oGB ipod is a perfect fit. I'm using it just now to avoid scratches until i find a good screen protector and silicon case.
JC#79 said:
Have a look for the aluminium (on ebay, under artemis/p3300) case for the artemis as I have just ordered one and hope it is a good fit for the orbit?
Click to expand...
Click to collapse
has your aluminiun case arrived, How much extra bulk does it add, as I'm thinking of getting one. I already have a black silicone case which is very good, and a very tight snug fit, but no protection for the screen. If the aluminium one is not to big, then I would sell my silicone case.
Yes my aluminium case came through the same day as my last post and it does not add much bulk to the device. The only issue I have had with it is the stylus is covered slightly so to remove it you have to open the case and slide the phone up slightly. Apart from that great case would recommend highly to all those in need of a case. My case came in a Pdair box so I assume it is made by them?
I also have the leather PDAIR flip case and my only criticism is that it extends a little to much toward the sides of the base of the screen so that I must angle the stylus a bit at the edges.
mungosdad said:
I already have a black silicone case which is very good, and a very tight snug fit, but no protection for the screen. If the aluminium one is not to big, then I would sell my silicone case.
Click to expand...
Click to collapse
I just had a look at the aluminium cases sold on Ebay but they don't seem to have protection for the screen as well? How is that different then?
Just like you, I ordered a silicon case last week and it arrived a couple of days later. I'm pleased with it, pretty tight fit, better grip, no chance anymore of scratching the camera lens when the phone is on it's back, and all the required openings are exactly on the right spot. Indeed, the only thing left is the absence of protection for the screen, but I don't carry the phone in a pocket together with keys or coins.
The aluminium case has a plastic screen in it to protect the orbit. You have to open the front cover to use the touch screen.
All of which is not a problem as I would advise anyone with a phone of this quality to purchase a screen protector ASAP.
I didn't use my orbit till my protector came through the post.
Hi All
I spoke to the lady in the O2 shop in Swindon about cases, she said that O2 will be releasing some Orbit specific ones in the next couple of weeks.
I have my fingers crossed.
Rich
JC#79 said:
I didn't use my orbit till my protector came through the post.
Click to expand...
Click to collapse
The slightly scratched, fingerprint smeared and dusty state of my just-over-a-week-old Orbit screen would probably give you a heart attack then! Screen protectors don't come cheap, £10 for little sheets of sticky plastic... selotape is under £1 a roll! I'll just use some of that!
Has anyone on their internet travels come across a vertical leather pouch/holster for the Artemis that has a belt clip?
Something like this:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=21740
Just want something that can be attached to a belt and the Artemis slid into and out of - not for use in the actual case.
Must be vertical and minimal size (ie designed for the Artemis and no larger).
Krusell Vertica with Multidapt® - S-Wide
Selotape aside I'll almost certainly be going for http://www.pielframa.net/pielframa_productos.asp?id=1685 (mentioned on the other case thread) if I ever bother getting a case... can't beat something made-to-measure!
Just got myself a Piel Farama in black for my Jasjam. Looks very good and high quality but certainly requires getting a bit used to as each time you have to open the flap and fold it all the way back to get a hold of the device to take or make a call.
regards
Thanks Moleshome - that is exactly what I am looking for except my only concern (as with all "multi" cases) is that it will not fit it nicely and/or be the smallest possible case for the dimensions of the p3300. I can't think it fits all of the listed "compatible" models perfectly and I don't know if the Artemis would be in that category.
Anyone bought this particular case? Experiences?
Got my Piel Frama case today - it fits the Orbit well despite being designed for the P3300 (sharper corners).
Overall a beautifully crafted case which I will probably return as it won't let me store a credit card in the flap. My last case for the XDA Mini was a Krusell - hope they bring out an Orbit sepcific case soon....
strongp said:
Overall a beautifully crafted case which I will probably return as it won't let me store a credit card in the flap. My last case for the XDA Mini was a Krusell - hope they bring out an Orbit sepcific case soon....
Click to expand...
Click to collapse
No good for spontanous gprs internet shopping on the go then?
I dropped an email to see if I could get one for review, fingers crossed otherwise I'll have to fork over some mulah or see what my birthday holds. (I've been a games/tech journalist for a while, which is nice)
Would be interesting to get a comparison of the Krusell and Piel cases, and maybe something a bit more on the minimalistic size. I'll see what I can do, but neither are contacts I've dealt with before.
Hi all,
I'm not having much luck getting a decent case for my Xoom in the UK, so far I have bought the following:-
(1) UltimateAddons Anti-Shock Memory Foam Sleeve Case for Motorola Xoom Tablet PC
(http://www.amazon.co.uk/gp/product/B004U7BW60) - This was WAY TOO BIG!
(2) Port Designs Berlin Netbook Skin 10 Inch With Life Time Warranty (black)
(http://www.amazon.co.uk/gp/product/B002PD61B2) - Nice case but really designed to hold a notebook (Has straps to hld the screen & keyboard) so my Xoom slips around inside.
(3) Black Rugged Carrying Case for Apple IPAD, iPAD2 AND Motorola Xoom 10.1 inch Tablet
(http://www.amazon.co.uk/gp/product/B004W1CFMO) - Didn't bother opening this one as it looked like my Xoom would slip around inside this case too??
I would prefer a case with handles but failing that a leather case - I quite like the ZooGue Leather case but this is not available in the UK
Any Suggestions??
Cheers
Ody
Well, I'm not in the UK, but I'm down here in Australia, so I have even less range to choose from than you (the Xoom isn't even out here yet). Well, you could still order the zoogue one from their site, I think. I'm pretty sure they have international shipping, don't they?
Also, I recently bought a case off eBay that has fully adjustable viewing angles (via the use of velcro), like the zoogue but is only US$25. I think it looks really nice too, but I guess I'll find out when it arrives.
I can't post links, but if you search "Black Folio Leather Case Cover For Motorola Xoom Tablet" exactly, it should show up. It's the one with taylor swift in on the xoom screen, and the seller is "dcone_us"
I've also been looking in the UK without much luck.
word of warning on the zoogue case, I preordered, but since it shipped 3 weeks ago I've not recieved anything. No responce to my latest emails to them either
jss42 said:
I've also been looking in the UK without much luck.
word of warning on the zoogue case, I preordered, but since it shipped 3 weeks ago I've not recieved anything. No responce to my latest emails to them either
Click to expand...
Click to collapse
My experience of buying stuff from the US, is that you'll get hammered for customs!
I wanted an Otterbox for my old Dell streak and ordered one from an ebay seller for about £20 inc postage (in the UK you could only pre-order for about £26) BUT the post office then charged me £10 adminstration for the customs, £1.70 VAT then another £1 for having the incorrect duty, so in the end it cost me £34 odd pounds!!
I Just checked on the ZooGue website that they ship by USPS so it will take a few weeks + the customs hold up
It took about 3 weeks for my Otterbox to arrive and that was bt USPS Express! which is faster than USPS Priority??
I am in Sweden and ordered the Zoogue case. After almost three weeks it arrived and I can only recommend it, its a great case.
I bought this one from ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270737383497
It's OK. The hole for the front facing camera wasn't positioned correctly so it covered it a little bit. I made it larger with a knife and now it's fine. You can't plug in the charger when its fully closed. Apart from those issues it's adequate. Better than the official case anyway.
The stock folio case is pretty good, seems to provide decent protection while being relatively small.
I ordered this one and its a perfect fit and looks great
Tuff-Luv 'Veggie' Faux Leather Pull-Tab Case for Motorola Xoom from Amazon UK. Sorry forum blocks me from posting url.
got the stock folio case , pretty happy with it , not too bulky , enough protection , 2 stand positions , think it was £30
I've tried a few cases (all from Amazon UK)...
The Navitech - cheap, but if you just want protection, then I guess it works, but I'm not using it, as the flap doesn't work in sofa mode
Motorola Folio - advertised as leather on Amazon, but it's nylon. No scratching problems for me, and I actually like it... protection at minimum size and it works in the speaker dock too. No more holding the Xoom while lying on a sofa
PDair BX2 Black Leather Case - expensive, but it is well made. It also offers more tilt positions than the Folio case. Doesn't work in the dock, but very easy to remove the Xoom from it (unlike the Folio case). Offers more protection than folio case, but it is bulkier. Also the leather border means some buttons on the edge of the screen can be a bit harder to press, compared to the Folio.
For the moment I am using the PDair
I've just recieved this:
http://www.amazon.co.uk/gp/product/B004XGIPJA/ref=oss_product
I think it's excellent for the price.
Great fit, solid close, and the stand doesn't collapse under pressure.
I just ordered this one
http://cgi.ebay.co.uk/Cover-Up-Moto...K_iPad_Tablet_Accessories&hash=item2310525de7
So fingers crossed it is nice. A bit more expensive than some of the others cheap cases... if it is no good then my next choice will be the noreve case
sent from my mz604
you live and learn ... at any rate you live
Brand new Zoogue case in the UK
http://cgi.ebay.co.uk/ws/eBayISAPI....70524&ssPageName=STRK:MESELX:IT#ht_500wt_1156
I've ordered this one for 19.10 GBP (22,54 EUR) incl. shipping costs:
LuvTab Black Luxury Executive Wallet (http://www.amazon.co.uk/gp/product/B004X5JO9Q/ref=oss_product)
Ordered it at Amazon.co.uk, but from Germany. I seems that it has been shipped from Krefeld/Germany, so it arrived less than 2 days after
For the moment I'm contented with it, it fits perfectly and doesn't bloat the Xoom too much. If I come to the US as planned for this summer, I'll have a look at this special new original folio case from Moto/VZW. Until then the current one is well enough.
Once which is the biggest problem with all of these cases appears with this as well: the device can't be charged while the case is closed.
If anyone's interested,
I ordered and received a second ZooGue Genius leather case for the xoom, now on ebay for UK mailing..
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190534111386#ht_500wt_1156
I received this one
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260775644654&ssPageName=STRK:MEWNX:IT#ht_1727wt_916
not bad for 12.99 + free delivery.
s.t.s said:
I just ordered this one
http://cgi.ebay.co.uk/Cover-Up-Moto...K_iPad_Tablet_Accessories&hash=item2310525de7
So fingers crossed it is nice. A bit more expensive than some of the others cheap cases... if it is no good then my next choice will be the noreve case
sent from my mz604
you live and learn ... at any rate you live
Click to expand...
Click to collapse
Received now and it isn't too bad. Nice soft leather... if perhaps a little too soft. The case seems to suffer from the top lip around the front camera not sitting snugly to the device that similar cases report. No notification light cutout or closed charging cutout.
Not bad for using in stand mode but still slips down a little a although there is a bottom flap that folds under the case there is no fixing for it. Also the lowest angle is not too comfortable for typing so had to lie it down flat. But the elastic fastening strap is very "moleskin" and secure.
They also claim there is a stylus/SD card slot but that is not really practical... if you look at the front there is a vertical line in the leather... this not just a detail stitch but a flap of sorts that might be OK for sliding business cards or notes of paper that you want handy briefly but anything of any depth just falls out all the time!
All in all though it isn't a bad case now I have gotten used to it and over come my first impression and given up with stylus pocket thing.
sent from my mz604
you live and learn ... at any rate you live
Hi, I realy want to buy already a good case for my Nexus 5. I was thinking about Spigen slim armor and a Ballistic SG Maxx (one for daily use and one for harder days), but this buisnes is very expensive.
Now, I understand it worth it, but if I can reduce the price why not to?
I saw this replica on Aliexpress:
http://www.aliexpress.com/item/2014...S-5-Champagne-Gold-Hard-Cover/2010438870.html
Does someone use replica? What do you think, should I pay the full price for the originals or those replicas are good enough?
Here is my story about all these cases, so pretty long time ago I brought slim armor for around 8 euros on eBay. But i actually got the real spigen case. Great quality, durability, etc. Just absolutely everything perfect (it is on still on my phone, only problem is that color has scratched off) So i thought i will try that again and i brought spigen neo-hybrid for 10 euros, and i got a Chinese replica. First of all, the rubber was very bad quality, The "metallic" part was some cheap plastic, the buttons didn't work at all, one even fell out of the case, the earphone hole was too small for any-kind of earphones and the charging hole was super small too, only one charger from 10 could fit the hole in the case. Anything that could be wrong, was wrong with the case, except the look of it, prettiest case there is. And i could not purchase the real case because of the small budget i have, i even contacted the seller in order to get the 10 euros back.
So its up to you, but make sure you can get your money back in case something is wrong with the case. If that is not possible, i would not buy a replica case in some shady Chinese site.