Hello all,
I intend to update to an iMate soon (as in Australia, I've found, they're considerably cheaper than the XDA II for some reason), but I don't want to shell out my hard-earned dollars for accessories I don't need.
I have an additional AC power adaptor / charger for the XDA I which is rated at output +5V @ 1A.
Is this adaptor (it's an original) the same as the XDA II adaptor?
Same goes for the car charger too - I have an original which I'd like to keep (since I'll get bugger-all resale) - is it identical to the XDA II car charger?
Thanks in advance.
Codenix.
I use my xda1 charger for both xda1 and xda2.
XDA Power Adaptors
G'day Codenix
Sure! The XDA and XDAII (and iPAQ) chargers are all the same connector and 5VDC / 1.5A and higher..
So yes - they're all interchangeable based on the specs of each.
P.S. If you're looking to upgrade to an iMate go to
http://www.c1au.com/imate.html
(iMate PDAs for $1299).
Cheers!
Andy
Related
Hi
I'm trying to obtain 100pcs of mains supply for the XDA and also 100pcs of the DC jack. I am happy with either new or used+tested.
Also - does anyone please know if a copy/3rd-party DC jack is available from anywhere? It must be 100% compatible.
Any information/tips/ideas would be gratefully received!
I'll buy from any legitimate company WORLDWIDE - location not an issue.
I will also buy from individuals with suitable refs.
Thankyou in advance for your help
Any questions - please PM me - I have refs, I am real!
Thanks - Mobilez
p.s. I have in stock if anyone requires (all genuine o2 branded):
XDA I USB Cradle - XDA I Serial Cradle
Stereo Headset - Car charger
USB Sync Cable - XDA I EXTENDED Battery
XDA I carry case - XDA I Executive Case
No styluses, No chargers, No DC Jacks
is the xda 2 car charger same as the xda 2s one just bought xda 2s of ebay and sold my xda 2 but woundering if i can use the car charger for it ?
There's a little calibration pin on the blue angel, you can use the xdaII cable but you'll need to file/scrape a bit off the cable's connector
You can also use some force to get it in but that is not advisable
The connectors are the same except for the $%^& gap in newer cables
thanks for your help m8
All I did when I got my iMate XDA2 car charger was swap the dongles on the end.
I am seriously thinking about upgrading from my Himalaya to a Blue Angel but I am curious which if any of the accessories are compatible?
Currently I have:
(2) USB cradles
(2) batteries
Car Charger
Sync Cable
Backpack *I know this is not compatible*
Are any of these still usable? Especially the batteries, the sync cable, the car chargers? I doubt that the cradle is, but would be nice so I don't have to buy another for work.
I am really trying to justify if this is a worthwhile upgrade.
Thanks in advance.
Re: Which Accessories from the XDA II can be used with XDA I
genghis said:
I am seriously thinking about upgrading from my Himalaya to a Blue Angel but I am curious which if any of the accessories are compatible?
Currently I have:
(2) USB cradles
(2) batteries
Car Charger
Sync Cable
Backpack *I know this is not compatible*
Are any of these still usable? Especially the batteries, the sync cable, the car chargers? I doubt that the cradle is, but would be nice so I don't have to buy another for work.
I am really trying to justify if this is a worthwhile upgrade.
Thanks in advance.
Click to expand...
Click to collapse
batteries wont work......its not a seperate battery this time,its a battery/back cover combi this time.
cradles didnt work on mine,but u get one with the device anyway so u wouldnt need to use an xda2 cradle. i upgraded from xda2 and the only thing that worked on my xda 2s/xda3 was the car charger. the jack is slighlty different, but still fits. but also my jack detatches from my house charger and fits on the end of my car charger , how cool. the sync cable, i never seen, but if it sticks in the bottom of the device like the charger then it should fit, let us know if u upgrade and what is compatable.
Specs aren't listed and I've already wasted money on 2 car chargers that don't charge my note 2, despite being touted to do so.
Sent from my SPH-L900 using xda app-developers app
Well..they charge him, but in slow mode. Connect your phone and go to Settings->Battery..and you will see one of this "Charging (USB)" or "Charging (AC)". If it says USB, then you only have 500 mA, and AC gives you max from your charger. Original charger for Note 2 is 2A. So, I doubt that any car charger will give you that amount of electric charge. It can help, but it is a really slow process.
Sent from my GT-N7000 using xda premium
Does your cigarettlighter-outlet in your car working?
I'm using a SonyEricsson MicroUSB car charger bought and used with the SE Xperia X10 Mini in 2010. It does easily charge the Note1 while using Google Navigate+GPS and the Spotify (Via Bluetooth with the car stereo).
this subforum for N7000, I suppose?
Sent from my GT-N7000 using xda app-developers app
I purchased a splitter from Amazon that came with 2 cigarette and 2 USB connections. I used the cable that came with my N7000 originally and plugged that in and it works fine. You can go on eBay and search for 2ah USB cigarette charger and just use the cable that came with the note to charge it up.
I wouldn't buy any longer cables as it seems to slow down the charging process by quite a bit.
hi
i have ipod 2port usb car charger
usb 1: 2.1 A
usb 2: 1.2 A
i use 1.2A and charge my note very good and fast
thanks
I have this one working great ^^
http://www.amazon.fr/gp/product/B005ZHD3FW/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1
Don't know if I could post this link, so excuse me and delete it if it's forbidden
Hey guys!
I just bought my xperia z3c last week and it came with a 0.85A charger. However unfortunately, i connected the charger to a faulty power socket and it ruined my charger. So i went and bought a new charger with a charging output of 1A. However when i used the new charger and used the phone, I noticed that the touch screen did not function properly. So should i get a charger with less amp output? Please help
Sent from my D5833 using XDA Free mobile app
Hi there,
The Amp does not affect the phone even if you have 3A adapter it will not affect the phone
the phone will pull the Amps as it need to charge
however if the Voltage is different than 5V maybe that what causing the issue
my Z3 compact adapter came with 5V 1.5A
Also there is Quick Charger 2.0 (5V 2A / 9V 2A / 12V 1.5A )
http://www.amazon.com/gp/product/B00OVD3FEU/
but the Quick charger need to be certified
hope that help
Thanks alot man
Sent from my D5833 using XDA Free mobile app
If it's a proper USB charger it should be putting out 5v but there are many chargers that do output 5V but are electrically noisy and this causes interference that stops the touch screen from working. I had a OEM Blackberry one that stopped iphone and HP pre/touchpad screens from working.
Ken @ http://www.righto.com/2012/10/a-dozen-usb-chargers-in-lab-apple-is.html did a nice review of some common ones and showed the difference in the quality of the power they provided.
If you have more then one phone, or a phone and tablet that you need to charge at the same time I have had good luck with Anker's family sized chargers.
Thanks for the links man
Sent from my D5833 using XDA Free mobile app