Related
Hi everyone
straight to the point..
I installed ROM ver 4.00.01 ENG. Unfortunately, now I cannot use the phone on my XDA. It can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the PDA works fine.
I've tried to install original o2 ROM, but.. still.. unable to get phone work.. it said.. no signal..
my XDA is a asian version.. any way to solve this problem.. i've installed this 4.00.01 ENG ROM for so many time, but still same problem exist.. and even with my original o2 ROM the one i downloaded from o2 website..
any suggestion?.. what should i do..
This is my device information :
ROM : 4.00.01 ENG
ROM date : 5/16/03
Radio Version : 4.21.00
Protocol version : 32S54
Model No. : PW10B1 (behind XDA stated PW10A1)
*i've try go to bootloader menu, try to change the Band, but it can move down even i pressing the joystick.. it seem like not functioning...
1 more info : the o2 centre told me that i need to change the whole xda board to make the phone working...mmm.. is it true?
tq
hamizi said:
Hi everyone
straight to the point..
I installed ROM ver 4.00.01 ENG. Unfortunately, now I cannot use the phone on my XDA. It can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the PDA works fine.
I've tried to install original o2 ROM, but.. still.. unable to get phone work.. it said.. no signal..
my XDA is a asian version.. any way to solve this problem.. i've installed this 4.00.01 ENG ROM for so many time, but still same problem exist.. and even with my original o2 ROM the one i downloaded from o2 website..
any suggestion?.. what should i do..
This is my device information :
ROM : 4.00.01 ENG
ROM date : 5/16/03
Radio Version : 4.21.00
Protocol version : 32S54
Model No. : PW10B1 (behind XDA stated PW10A1)
*i've try go to bootloader menu, try to change the Band, but it can move down even i pressing the joystick.. it seem like not functioning...
1 more info : the o2 centre told me that i need to change the whole xda board to make the phone working...mmm.. is it true?
tq
Click to expand...
Click to collapse
Hello,
When you entered the bootloader did you see GSM Error ?!?!
If it was Gsm ok no need to change it you have to flash it with the right radio stack depending on the hardware.
tq 4 the reply..
anyway.. the GSM stated NO PRBLEM at all.. GSM OK..
but.. can i install original o2 radio stack with this ROM.. coz.. my device PW10A1.. but ROM version is for PW10B1...?
i dont know what else to do...
tq
hamizi said:
tq 4 the reply..
anyway.. the GSM stated NO PRBLEM at all.. GSM OK..
but.. can i install original o2 radio stack with this ROM.. coz.. my device PW10A1.. but ROM version is for PW10B1...?
i dont know what else to do...
tq
Click to expand...
Click to collapse
Hamizi,
Yes you can install o2 original radio stack it doesn't matter at all but it's not easy to downgrade if the version you have older than the current. Unless you could try this radio stack I already downgraded to this version ,you can get it from here ==> http://forum.xda-developers.com/viewtopic.php?t=9359&highlight=
I'm not responsible for any deffects.
Good luck
hi RamX2,
my god.. u save my life.. finally.. after few week waiting.. i solve my problem... now.. my xda come back to business..
i really want to thanks u.. u're really a man.. very helpful..
tq.. and tq again..
Hamizi,
You're most welcome bro, if you searched in the forum very well you would solved your problem without asking anyones help, lots of ppl here went into the same problem anyway now it's good that ur device is back to business :wink:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
LOL, sorry mate but that really IS a noob question
works perfect !
Thanks man
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Thank's a lot Shadowmite,
Just one last question before I try :
You're refering to the "Hard-SPL_ZakMcRofl.zip" in your first post. On the other hand, I saw you opening a thread regarding the new "Hard-SPL 1.30 MFG - Oli.zip".
Which one should I/we use, or doesn't it make any difference.
Having a SFR/Vodafone s300+ I'm a bit scared as there's no genuine rom to downgrade back to in case I get blocked.
Bye
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thank you so much!
I want to try this ROM right now, but I don´t have access to rapidshare-like sites here in my office.
Can someone upload this ROM to a public server ZIPped and RARed with password (to avoid proxy to sneak into the file... it's blocking some downloads...)
I can setup a FTP account. If someone can upload the ROM to my server, I can share the ROM with people who has the same problem with rapidshare-and-stuff sites.
Thanks!!!
installed the rom.
but....
now i want to return to the original rom and downgrading i obtain a vendor id error.
I tried to cid unlock the device also and the error i the same. any ideas that can help me?
thanks
junwei83 said:
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Click to expand...
Click to collapse
wow man ! thanks a LOT ! i really appreciate it
only a few ppl would stop and help
thanks again
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
Tried with the Olipro and everything works fine.
Big thanks to all the people on this forum always ready to help.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thanx, process working...
Version of this rom?
SEA or ANZ?
Thanks
I've just updated the SPL with the one provided on this post...
It seem to be the Des’ Crash-Proof SPL...
I have this informations on the screen when starting in boot loader mode:
------------------------
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
------------------------
which versions we have to use ??
I think that you previously talking about olipro ?
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
ROM working but...
Hi there!
First of all thanks for the trouble of getting the nasty bits out of the bundle and giving us just the OS
But... (there seems to be always a "but" with WM6) I've been having some problems with this:
- VOIP is nowhere to be found, no SIP settings anywhere.
- Memory Stick corruption. From time to time my SDHC stick goes crazy, showing up strange characters for the filenames and only a soft-reset gets it back to normal.
- Did any of you guys manage to get Video Calling working?
Well... the major deal for me is the Memory Card issue... Anyone having the same problems? Any ideas?
Best,
M Addario
--
HTC P3600
any hard-spl will work for this repackaging of the release.. you're fine to proceed
yes, you have Des' crash-proof SPL
addario, there's really no need to post the same question in multiple threads..
This rom seem to not contain any ext_rom ...
The "Device Information" module dont report any EXT_ROM version ...
it's "normal" ?
The attached screen capture show the "Device information" tab.
There is no informations about the ext_rom.
I also cannot access to it thru Total Commander.
So... it seem that something is corrupted on this rom update...
Some Info....
@ Shadowmite
Dear could you please tell me from which version did you re-make this ROM & why is there no detail showing of ExtROM in Device Information.
Hi,
I'm completely new to all this but have done my best to try and figure it out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"= soft reset to see if I needed to install a hard SPL : I do. I've downloaded Des' Crashproof (due to the reassuring name).
I can now install that by following the guide without backing anything up yet...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right? If I'm not mistaken and I can install any ROM, which English ROM is the best (this one looks good...)?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
Thanks for your help
I updated my jasjam with Win mob black (looks nice)
i wanted to know whats the difference between radio rom and normal rom like wm black . .. . which one is beter . .
if Radio rom upgrade is better then give link to the best rom available ?
thanks , , ,,
Ok
Before you put up any more post please READ THE WIKI
What country are you from and see from the WIKI what is the latest release of the WM6 ROM come with, chances are that will be the best radio for you.
Please read the WIKI!! To make sure that you are flashing the correct ROM to the right DEVICE!!
I am from pakistan
Cant find any radio rom for my country . . . . Any links
(runing blacksatin on jasjam)
And also iz there any advantage doing radio rom upgrade vs normal upgrade that i did , , ,
By doing a radio update will this black satin rom gets deleted
Thanks in advance sir . . . . .
zeeshan123 said:
And also iz there any advantage doing radio rom upgrade vs normal upgrade that i did , , ,
By doing a radio update will this black satin rom gets deleted
Thanks in advance sir . . . . .
Click to expand...
Click to collapse
Man I have told you from my previous post to read the wiki, and you haven't that's a cardinal sin! Go confess to the priest and come back when you have read the wiki.
Read the wiki no where can find anything related to radio rom for pakistan , ,
zeeshan123 said:
Read the wiki no where can find anything related to radio rom for pakistan , ,
Click to expand...
Click to collapse
If you had truly read the wiki then you would understand that the imate brought out the 1.54.30.10 radio with the latest ROM upgrade here
Release thread was here. Now do a careful upgrade and report what's it like in Pakistan
allow me to help because it seems like you've gotten lost in translation and this is getting out of hand.
if you flashed your Black Satin rom then you obliviously know what you're doing to some degree. in regards to your radio rom question: flashing a radio rom does not effect the OS rom you have (black satin). the only thing flashing the radio rom does effect is your phones cellular radio, i.e., your carrier signal strength, data connection speed. since im in Philadelphia i cant really help you decide on which radio will work best in your area. i can only point you here
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
these are the known radio roms available for the Hermes. at best, i can say start with 1.47.XX and see what works best for your area. good luck to you.
Thunda i also read that page. .. . no wheres it written which rom is for which part of the world ?
Shd i download the last (latest ) one ,, , ?
zeeshan123 said:
Thunda i also read that page. .. . no wheres it written which rom is for which part of the world ?
Shd i download the last (latest ) one ,, , ?
Click to expand...
Click to collapse
Hmm ... I am in New Zealand, and I am testing the latest radio rom, and it is working well, what works well for one country may not work for others, I would stick to the one the manufacturer's made for you. It is good for you to flash a shipped rom for your device first then any other rom you wish to keep after that. FYI I have an imate jasjam and I am running the latest radio, but doesn't mean that you should too.
zocster said:
Hmm ... I am in New Zealand, and I am testing the latest radio rom, and it is working well, what works well for one country may not work for others, I would stick to the one the manufacturer's made for you. It is good for you to flash a shipped rom for your device first then any other rom you wish to keep after that. FYI I have an imate jasjam and I am running the latest radio, but doesn't mean that you should too.
Click to expand...
Click to collapse
he hit the nail on the head. im using the "newest" radio myself and i must say battery life is excellent and im picking up an extra bar here in Philly (USA). i say try it for 2 days then make your own call
Again
Wiki should be your bible, we don't want you to brick your new jasjam now do we ...
actually my mobile came from some other country ,,,
i bought it unlocked from a shop . .. .(written cingular 8525 on it)
, ,, , , so it was not develop for pakistan , , signal suffer a lot ,
zeeshan123 said:
actually my mobile came from some other country ,,,
i bought it unlocked from a shop . .. .(written cingular 8525 on it)
, ,, , , so it was not develop for pakistan , , signal suffer a lot ,
Click to expand...
Click to collapse
If there isn't a Radio produced by a carrier in Pakistan then you are going to have to try a few Radios to see which one is best for you. Please use a MicroSD card to update your Radio as we don't want your next thread title to be "Please help, I bricked my phone".
zeeshan123 said:
actually my mobile came from some other country ,,,
i bought it unlocked from a shop . .. .(written cingular 8525 on it)
, ,, , , so it was not develop for pakistan , , signal suffer a lot ,
Click to expand...
Click to collapse
try 1.54 or 1.48 radio. 1.54 is the orginal shipped radio for 8525 wm6 from at&t/cingular. i remember using that one in India, and it worked just fine for me.
zeeshan123 said:
actually my mobile came from some other country ,,,
i bought it unlocked from a shop . .. .(written cingular 8525 on it)
, ,, , , so it was not develop for pakistan , , signal suffer a lot ,
Click to expand...
Click to collapse
Just one further note please try and be honest when you post your problems/ questions. Detail your phone make and model, and the current ROM and Radio rom you have.
And then we can try and help you, otherwise, I am sorry we left our crystal ball at .... oh hang on ai6908 stole my crystal ball!
zocster said:
Just one further note please try and be honest when you post your problems/ questions. Detail your phone make and model, and the current ROM and Radio rom you have.
And then we can try and help you, otherwise, I am sorry we left our crystal ball at .... oh hang on ai6908 stole my crystal ball!
Click to expand...
Click to collapse
well i always have my crystal ball handy
As mentioned by some of the great members like Wam7, Zocster, and thunda_chunky, read as much as you can before flashing a new radio ROM. So much of what goes on here is trial and error. All you can do is try to eliminate the error. I am running the same radio as Zocster, 1.56.70.11, and it holds the highest signal strength of any previous radio I've had. That doesn't mean it will for you depending on your carrier and location.
mikehippe, Agreed, I'm trying out 1.56.70.11 on my jasjam and though others say its awesome, I'm not too impressed by it here in Oz... Oh well, back to 1.54.30.10.....
Cheers...
ultramag69 said:
mikehippe, Agreed, I'm trying out 1.56.70.11 on my jasjam and though others say its awesome, I'm not too impressed by it here in Oz... Oh well, back to 1.54.30.10.....
Cheers...
Click to expand...
Click to collapse
Funny that CRCinAU not liking that radio either.
hello everyone, im trying a few days to install a rom but after few minutes i get error message!! i've used the Hard-SPL-Diamond-OliNex. idont know if it was success. but after that when i tried to install any version of rom i got error.
please some one help me out!!!!
my cuurent radio version is 1.00.25.03 and i ahve a dutch rom version.
areenahmed said:
hello everyone, im trying a few days to install a rom but after few minutes i get error message!! i've used the Hard-SPL-Diamond-OliNex. idont know if it was success. but after that when i tried to install any version of rom i got error.
please some one help me out!!!!
my cuurent radio version is 1.00.25.03 and i ahve a dutch rom version.
Click to expand...
Click to collapse
Manually enter bootloader and read the SPL version. That way you can verify you successfully upgraded HardSPL. If so, what is the error you receive?
sorry, could u pls tell me how, it would be so kind of u.
i mean step by step, if u have time for that!!!
many many thnx
areenahmed said:
sorry, could u pls tell me how, it would be so kind of u.
i mean step by step, if u have time for that!!!
many many thnx
Click to expand...
Click to collapse
You can find step by step in the sticky thread Tutorial here: http://forum.xda-developers.com/showthread.php?t=416211
But please read the Announcements too and obey forum rules!
Sry to extend this thread with another request for help, but the topic and the previous messages seem to fit.
I want to flash a T-Mobile MDA compact IV. I had no problem with the HardSPL from Olinex. I flashed 1.40 (also it says 1.30) and 1.38. But when I want to flash a ROM (tried some from the forum) I always get an error 262.
I got the same problems when I try to flash HardSPL 1.34 from jocky(?).
Any ideas why and what to do?
Thanks for your help
CacheDigger said:
Sry to extend this thread with another request for help, but the topic and the previous messages seem to fit.
I want to flash a T-Mobile MDA compact IV. I had no problem with the HardSPL from Olinex. I flashed 1.40 (also it says 1.30) and 1.38. But when I want to flash a ROM (tried some from the forum) I always get an error 262.
I got the same problems when I try to flash HardSPL 1.34 from jocky(?).
Any ideas why and what to do?
Thanks for your help
Click to expand...
Click to collapse
Check this out: http://www.google.com/cse?cx=000825...r+262&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
You might be surprised!
i m totally new to HTC Diamond.......just purchased the phone couple of days ago....
my phone's config is as follow....
Spl - 1.93.0000
Rom - 1.93.720.2 WWE
Radio - 1.00.25.07
Protocol - 52.29.25.12G
i want to upgrade my phone to custom Roms...but i hv no idea that , which SPL , Radio and Rom should i use...
so please help me out by suggesting that which SPL, Radio n Rom should i go for...
any help is much appreciated......thanks in advance ....!!!
Reading and searching is hard for you?
http://forum.xda-developers.com/showthread.php?t=416211
vicsmurf said:
Reading and searching is hard for you?
http://forum.xda-developers.com/showthread.php?t=416211
Click to expand...
Click to collapse
i hv read this for almost like 30-40 times....but still cant decide......that which would b good for my configuration..!!!
It just depends what you want.
Do you want a light rom or a full rom? I think you should choose a 2.03 rom for example the Aztor X2 WWE. If you don't like it you can always choose an other rom.
vicsmurf said:
It just depends what you want.
Do you want a light rom or a full rom? I think you should choose a 2.03 rom for example the Aztor X2 WWE. If you don't like it you can always choose an other rom.
Click to expand...
Click to collapse
if i hspl my device..
can i get my original spl, Radio etc by using Stock Rom Upgrade, which is available at HTC India ???
If you cant figure out what is best for you just by reading the loads of help and stickied threads, maybe you should not be doing this to your phone.
IMHO, you should install the dev hardspl as the other one will severely limit what you can do. I noticed your in India, is your device a 3g diamond? If not, you will need to do more reading.
BY: hksin1988
can i get my original spl, Radio
Click to expand...
Click to collapse
Traditionally, you can get back to the original SPL but it's very crucial that you find this out for sure as it's ultimately your responsibility if anything happens. I read for days before crossing the line.
Kevbodian said:
If you cant figure out what is best for you just by reading the loads of help and stickied threads, maybe you should not be doing this to your phone.
IMHO, you should install the dev hardspl as the other one will severely limit what you can do. I noticed your in India, is your device a 3g diamond? If not, you will need to do more reading.
Click to expand...
Click to collapse
No...my device isnt 3G...thts y m getting so much confused...cuz all thes Roms r lookin for 3G
while i just hv triband phone
hksin1988 said:
No...my device isnt 3G...thts y m getting so much confused...cuz all thes Roms r lookin for 3G
while i just hv triband phone
Click to expand...
Click to collapse
Type this in google (I found lots of information for you):
2g diamond site:forum.xda-developers.com
(Or just click it)