... ... ... - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

... ... ...

Try this to at least get the phone booted:
1) download Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=j...07763241,d.dmo
2) download the tar version of TWRP 2.8.7.0 from here: https://dl.twrp.me/d2att/
3) download the latest cm12.1 for the phone from here ( http://www.cmxlog.com/12.1/d2att/) and save it to a micro SD card;
4) download the version of cm12.1 gapps you want from here (https://wiki.cyanogenmod.org/w/Google_Apps) and save it to the same sd card where you saved CM12.1;
5) place the micro SD card into the phone;
6) boot the phone into download mode;
7) open Odin 3.07 and uncheck everything except f. reset time;
8) click on PDA and browse to the tar TWRP file and select it;
9) connect the phone and it should show up as a com port in Odin;
10) flash TWRP;
11) when you see the word RESET in the status window, remove the USB cable, remove the battery, replace the battery, use the button combination to get into recovery which should now be TWRP;
12) perform a full wipe of system, data, and cache;
13) flash CM12.1 and gapps from the micro SD card;
14) reboot;
15) use the Samsung Phone info app to determine the bootloader. Once you know the bootloader post, the result here as the bootloader determines what can and cannot be done to get it back to stock.

... ... ...

How did you get it booted?
Now that I know the phone has an mjb bootloader, Odin is failing because the 4.3 bootloader cannot be downgraded and the only stock rom available for the i747 is 4.1.

... ... ...

Okay. It's good to know that I was able to help.

Related

[Q] CleanROM + error flashing zip = facedesking. Need help please. Info inside.

Ok so here is what I have done so far:
1.) I rooted via this method:
Step 1: Download Odin v3.07 and CF root (for non-AT&T variants, find the root file for your phone and plug that in for this CF root link. The rest of this guide should work for you). After you do that, right-click and extract the files to somewhere easily accessible (like your desktop).
Step 2: Go to Settings>Developer Options>turn developer options on>turn on USB debugging
Step 3: Make sure your phone is not connected to the computer at this point. Open up Odin, select PDA, navigate to CF-Auto-Root-....tar.md5
Step 4: Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button (in this case volume up)
Step 5: USB connect your phone to your computer and in Odin make sure Repartition is not checked. Leave everything else alone. Click the Start button and wait for your phone to reboot twice.​
2.) installed goomanager and ran the script that installs twrp for you and ran a recovery
3.) booted into twrp, cleared cache/d-something cache, did factory reset, and the system reset (forgot the exact name)
4.) tried to install cleanrom (had it on my internal SD card) and got the "error flashing zip" line
I've looked around reading everyone's solutions and it's come down to
a.) i need to reinstall/redownload and try again. Thing is, idk how to remove all this crap (my backup was created after doing the twrp stuff) so that I can reinstall
b.) twrp is the issue and i need to use CWM. again, not sure how to remove twrp before installing CWM and the guides that I've come across to install CWM aren't simple enough for me (im new to this)
Any insight would be great. I've been loading back into my backup trying to start over and I'm afraid if I keep messing around I will brick my phone which is why I have come to you guys. Trust me I've been looking stuff up for hours and I still can't seem to figure it out
I would do that, but it's just me.
-I would boot in recovery , wipe cache, dalvik, factory reset, and system.
-Boot in Download mode, flash the appropriate stock rom.
-Let it boot in stock rom.
What i do to root and install twrp.
- I boot in download I run cf-Autoroot through odin, then let it boot
- I boot in downaload again and run twrp through odin again let reboot (you need the correct twrp file to flash with odin).
You now have a freshly rooted and clean install of everything. Check Md5 or redownload CleanRom.
When i install cleanrom i reboot in recovery,I wipe cache, dalvik, factory reset and system, then i install the rom and reboot to system, i never had issues doing everything this way. I believe its the correct and clean way to do.

[FIXED] SM-T320 Un-bricked

If you can access download mode (power + vol down) you can recover your device. Just download and install Samsung Kies. Much less a headache then trying to find the proper firmware and flashing via odin. :good:
Faznx92 said:
Had random restarts using mondrianwifi. My device knox is 0x1. In twrp_v2.8.1.0 I wipe --> advance wipe and select Dalvik, Cache, Data, Internal Storage, System. I tried to restore my twrp backup from my sd card. I place my backup on my sd (via computer) in the /TWRP/BACKUPS/ folder. I goto restore, external_sd, Nothing.
Next I put a firmware version ng1 zip region xar downloaded from sammobile on my sd card. I goto install the zip via recovery, everything installs fine, reboot, then bootloop. Then I go back into recovery and wipe like I did above.
Then I change the filename of the zip to tar and try to flash via odin in download mode but the odin process stops working.
I need proper guidance. Help will be appreciated.
Click to expand...
Click to collapse
Try to unzip with 7zip first, and see what the unpacked file is.
If it's .tar. flash again with Odin. You can't just rename the extension because it simply won't work.

Stuck In ODIN Mode

ODIN MODE
PRODUCT NAME: SGH-I747 CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECURE BOOT: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 2
Need help with this. Ive tried Odin and Kies with no luck. Have searched 2 days for a solution. Can't get into recovery. Only download mode.
You have at least a 4.3 bootloader on your phone.
Do not flash any ROMs or files that attempt to change your bootloader until you determine the exact version of your phone. Flashing the wrong bootloader version may hard brick your phone.
Since you are familiar with Odin, you should try this:
Download the latest tar.md5 version of Philz Touch recovery from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Download the latest cm11 for the d2lte from here: https://download.cyanogenmod.org/?device=d2lte. Save cm11 to an external SD card.
Download the Gapps from here: http://wiki.cyanogenmod.org/w/Google_Apps. Save the Gapps file to the external SD card. Place the SD card into the phone.
Boot the phone into download mode, uncheck everything in Odin except f.reset time. Connect the phone and flash Philz. When you see the word "reset" in the status window, remove the USB cable, remove the battery, replace the battery, boot into recovery, wipe data, cache, system, and Dalvik. Flash CM11, flash Gapps, download Samsung Phone Info app from Play store, open app, look for the phone's bootloader and modem version.
audit13 said:
You have at least a 4.3 bootloader on your phone.
Do not flash any ROMs or files that attempt to change your bootloader until you determine the exact version of your phone. Flashing the wrong bootloader version may hard brick your phone.
Since you are familiar with Odin, you should try this:
Download the latest tar.md5 version of Philz Touch recovery from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Download the latest cm11 for the d2lte from here: https://download.cyanogenmod.org/?device=d2lte. Save cm11 to an external SD card.
Download the Gapps from here: http://wiki.cyanogenmod.org/w/Google_Apps. Save the Gapps file to the external SD card. Place the SD card into the phone.
Boot the phone into download mode, uncheck everything in Odin except f.reset time. Connect the phone and flash Philz. When you see the word "reset" in the status window, remove the USB cable, remove the battery, replace the battery, boot into recovery, wipe data, cache, system, and Dalvik. Flash CM11, flash Gapps, download Samsung Phone Info app from Play store, open app, look for the phone's bootloader and modem version.
Click to expand...
Click to collapse
You are the man! I'm back up and running. Thanks so much. Learned a lot today.

tmobile sgh-t999 s3 wont boot completely need help

Hello everyone. I have a tmoble s3 that was once rooted and then updated with kies and ran on stock firmware. The phone was updated to the latest firmware but I had lost root. I left it alone and all was well for many months. The other day after charging the phone it was unable to complete the boot. I can boot to recovery and to download mode but it wont safe boot or normal boot it hangs up at the last phase. I took the phone in to a samsung rep and he tried to load the firmware on the phone he did a home recovery but the phone still doesnt complete the boot. I had already tried factory reset before taking it in and it failed. I am not sure how to fix it since it isnt rooted any ideas on how to fix the phone? Is it possilbe to fix this phone or is it just a paperwieght now? Can you odin a pre rooted rom on a phone that isnt rooted and wont boot in order to enable usb debugging or developer options? I have no idea how to proceed so any advice would be appreciated. Thanks in advance
To quickly check the phone's functionality, I suggest the following:
1) download Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=j...07763241,d.dmo
2) download the tar version of TWRP 2.8.6.0 from here: https://dl.twrp.me/d2tmo/
3) download the latest cm12.1 for the phone from here ( http://www.cmxlog.com/12.1/d2tmo/) and save it to a micro SD card;
4) download the version of cm12.1 gapps you want from here (https://wiki.cyanogenmod.org/w/Google_Apps) and save it to the same sd card where you saved CM12.1;
5) place the micro SD card into the phone;
6) boot the phone into download mode;
7) open Odin 3.07 and uncheck everything except f. reset time;
8) click on PDA and browse to the tar TWRP file and select it;
9) connect the phone and it should show up as a com port in Odin;
10) flash TWRP;
11) when you see the word RESET in the status window, remove the USB cable, remove the battery, replace the battery, use the button combination to get into recovery which should now be TWRP;
12) perform a full wipe of system, data, and cache;
13) flash CM12.1 and gapps from the micro SD card;
14) reboot and enjoy

The Plan (now guide)

The post below started out as my proposed plan for updating a S3 i747m (Canadian) from stock 4.4.2 to CM11. I've since gone back and updated it with the results to turn it into more of a guide for the next moder. This will not do a carrier unlock and it will flip your warranty bit.
Prep:
Download and install Odin_v3.09.zip (recommended for JellyBean/KitKat firmwares) (droidviews.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/)
Download and install the Samsung drivers (samsung.com/us/support/owners/product/SGH-I747MBBATT#)
Download the latest appropriate TWRP (at the time if writing it was twrp-3.0.2-0-d2can.img.tar, not the .img but the .tar file, from the dl.twrp.me/d2can page).
Download CyanogenMod and copy it to the external SD card (started with the latest CM11 build with the stagefright fix from download.cyanogenmod.org/?type=snapshot&device=d2lte).
Download Gapps and copy it to the external SD card (personally I grabbed the ARM/4.4/Nano from opengapps.org).
Install recovery:
Boot into Download Mode on the S3 (hold home + volume down, hit power button, then volume up at the confirmation screen)
Launch Odin (as admin) and uncheck everything except Auto Reboot and F. Reset Time.
Select the TWRP .tar file in the AP (apparently used to be PDA) mode and flash the recovery
Once the phone has rebooted successfully, shut it down.
Install CyanogenMod:
Boot into recovery (hold home + volume up, hit power button)
Do a nandroid backup for good measure
Do an advanced wipe of your system, data, internal storage and caches (if you don't you get an error 7)
Flash CyanogenMod
Flash Gapps
Reboot
That successfully installed CM11. As it went so smoothly, I decided to try install CM12.1 right away. I grabbed the "cm-12.1-20160314-NIGHTLY-d2att.zip" (from here: forum.xda-developers.com/showpost.php?p=66726324&postcount=1202), got a copy of the ARM/5.1/Nano from opengapps.org and repeated the above process with success. All seems to be stable so far.
One unknown I had was the deleting of "/system/etc/install-recovery.sh" and "/system/recovery-from-boot.p" as specified in some guides. audit13 mentioned it probably wasn't necessary and I can confirm it wasn't.
Thanks again to audit13 for their vote of confidence.
Plan looks good except I don't think it is necessary to mount the partition in twrp and delete the two files. I have flashed the Telus and T-Mobile versions of the s3 with custom roms and have never had to delete any particular files prior to flashing.

Categories

Resources