:( - JASJAR, XDA Exec, MDA Pro Software Upgrading

i have a big problem my friend lent me an 02 xda exec. i hard reset it n now the problem is that whenevr the phone starts it says tap on the screen to setup ur windows mobile phone....but the screen tap is not working the keybaord is fully functional except the start menu i.e the window icon key and the i cannot tap on the screen with the stylus....please help :S ...though i can recive n send calls use all the rets of the keyoard but the touch screen doesn't work i can see everything clearly but the only problem is the tap input!

so hard reset it again and go through the setup properly.
buzz

Hi,
Maybe your alignment is out. ie your screen taps are off the mark.
Realign your screen (maybe with a hard reset like they say).
Just a thought
Michael

On a side note, I noticed a little "backdoor," if you will, when the initial Windows Mobile calibration and tutorial starts up - press the OK button and it will take you straight to the Today screen, but since the touchscreen hasn't been calibrated, it performs totally wacky when you touch the screen.
Of course, you can use the keyboard to get to the Settings panel and go to the Screen applet and recalibrate it from there.

thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S

cyrus994 said:
thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S
Click to expand...
Click to collapse
do a HARD RESET... push the little buttons on the keyboard that are dashes. They are to the left and right of the send and end call buttons. While holding those down reset the device.
So to repeat... DO A HARD RESET> am i missing something?
Cyb

i did a hard reset but still does not work
i did a hard reset then a screen appears after a i press 0 that says Tap here to setup your windows mobile phone. But when i tap on it nothign happens :S

Faulty screen?

i had same problem, just had to many hard resets, also take the battery out for an hour or two

Related

Screen Lock

hi,
does anyone know how i can set it so the screen auto locks after a given amount of time or is there a freeware app that can do this please. because i rather have it that having to remember to press the power button to lock everytime, sometimes i might forget.
cheerz,
snoop
Lock the Screen? Power-Button simply switches the Device of, e.g. the screen. In Power Management you can set a Device timeout in Battery Mode and on AC Operation. This is equal to pushing the Power Button
I think i see the problem, or i'll tell my problem with that issue...
When you push the power-button the screen turns off and is locked, but if you receive a sms or so, the screen returns back on and is not locked...
ok ye i think u get my point.
i dont know about screen lock after receiveing sms or call.
but i c the point of samson, pressing the power botton does lock the screen.
snoop85 said:
ok ye i think u get my point.
i dont know about screen lock after receiveing sms or call.
but i c the point of samson, pressing the power botton does lock the screen.
Click to expand...
Click to collapse
look for deviceock or vj devicelock.
There is a today-application called BatteryStatus. With its help you can lock the device automatically when it is shut down. Does the job for me - of course you allways have to unlock the device after turning it on.
drmadu said:
There is a today-application called BatteryStatus. With its help you can lock the device automatically when it is shut down. Does the job for me - of course you allways have to unlock the device after turning it on.
Click to expand...
Click to collapse
hi
do u have the file? As im sure there would be many apps with similer name. would be great if u could attach file plzz
thnx
Snoop
snoop85 said:
hi
do u have the file? As im sure there would be many apps with similer name. would be great if u could attach file plzz
thnx
Snoop
Click to expand...
Click to collapse
If you had bothered typing 'BatteryStatus' into Google you'd have seen it was the first hit. Establishing it is the right program is simply a case of reading the web page. Why are people so goddam lazy these days?
yes ok i get your point. sorry.
right i have installed. lots of nice options and things. but have little problem now. As we knw the device has the function where as the backlight will turn off after a set amount of time. Mines set to 30sec for battery power and 1min for external power.
After 30secs (using battery) it does its job and turns off the backlight. Normally i would press the power button and device turns back on. HOWEVER! since installing batterystatus the device just wont turn back on. I mean its got enough battery, i can tell this because 1) the light at the top flashes 2) Heres the strange thing , the only way i seem to be able to waking the device from backlight is by pluging in the usb cable.
So i thought i would try and un-install the app see if that would help..but nope that didnt help because it still does the same thing.
After installing the app i did a soft rest. I thought it might help, but it didnt. This is the other thing, once i did this, i see the t-mobile splash screen where shows the ROM and other info. And then i just goes blank for a while....and then i see the T-mobile PIN entry keypad splashing by every few secs. I was only able to by pass this after trying and trying to enter pin number on a black screen.
Do you think i should do a hard-rest? Dont really want to do this. Means i have to re-install my little apps and contacts, email settings etc etc.
Can anyone help me with this problem please??
Hi there, i had quite te same problem, after a soft reset the backlight turns on until the bootup screen dissapears, then the screen seems to be blank, but it shows everything, but without the backlight on. You have to point a light onto the screen and you can hardly see wats on it.
Then go to the backlight settings and turn it up.
Then you have to look at every program, thats adjusting the backlight settings and turn of automatic darken screen or so in the program.
That helped for me.
amokoma said:
Hi there, i had quite te same problem, after a soft reset the backlight turns on until the bootup screen dissapears, then the screen seems to be blank, but it shows everything, but without the backlight on. You have to point a light onto the screen and you can hardly see wats on it.
Then go to the backlight settings and turn it up.
Then you have to look at every program, thats adjusting the backlight settings and turn of automatic darken screen or so in the program.
That helped for me.
Click to expand...
Click to collapse
WOW great i thought it was just me *phew! lol*. Thats excatly what is/was happening to me but....
this app just gets stranger and stranger.
i reinstalled baring in mind your suggestion. I did the same thing i did before, expect i turned the brightness up before i installed. Then once installed waited 30secs and soft restted. And :S stranger thing was that the problem didnt happen this time, i saw the t-mob splash screen, saw the windows mobile green splash screen and then my keylock and then pin number screens.
hmmmm no idea wots that was all about. but hey its all working K.O so im happy now. just got to fiddle with the settings now
Thanks againt to everyones help. Appercaited
Snoop
Had the same problem SPB pocketplus 3 seemed to be the problem did a hard reset and no more pocket plus all problems resolved.
my problem seemed to be SPB PocketPlus too, but i did the thing i wrote earlyer and it still works just fine.
ClearType Lock the screen
I've noted that the screen will be lock when I set the CleartType. Has somebody the same issue?
faria said:
look for deviceock or vj devicelock.
Click to expand...
Click to collapse
people claims in this thread that OnLock is much better than VJ DeviceLock
http://pdaphonehome.com/forums/ppc-6700-xv6700/80830-i-have-written-another-screenlock-program.html
regards

I cannot get screen taps to work

My Artemis Orbit on O2 froze so I did a soft reset - no luck so I did a hard reset. The phone boots to the green screen which says 'Tap the screen to set up your Windows Mobile-based device etc'
However there is no cross to tap and screen taps do nothing.
I've flashed the ROM via the Bootloader screen (followed instructions to load the correct O2 Operator NBH file to the root of a Micro SD card) a few times but no luck.
I cannot find anything on this problem on the site but I can miss things!
Can anyone advise what I need to do?
Thanks,
Stew
Seems nobody knows what I should do here.
I can get to Bootloader and see ActiveSync but it won't go past the 'setup screen' where it asks for screen taps to align the screen. There is no 'cross' on display.
Which part of the software controls this?
On the inital screen there is no cross, but a screen tap anywhere should start the setup proceedure.
I cannot get a screen tap to be accepted anywhere. The Green Setup screen appears asking for a tap but that does nothing - I'm thinking a tap with a large hammer is coming to it soon! Only joking!
Is this a hardware fault I've got rather than a software problem?
There is no screen cover on it as I've read than can hamper screen taps.

Stuck on Align screen (tapping works)

I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Raven_coda said:
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Click to expand...
Click to collapse
hard rest then hold the 2 buttons next to the volume slider only and press the rest button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
then press the message button on the front that looks like an postal letter
this wil reset the options saved kind of like resetting a pc bios to manufacture defaults .
then try again to do the alignment.
I had similar when I flashed pdaviets rom to my blue angel and that resolved it
Thanks for the reply, unfortunately I broke me screen tinkering with it so I'm not able to test your idea.
I started with two LCDs one with a bad digitizer and one with a broken screen. I touch the digitizer off the one a replaced the other so that I had a working screen but then I had the problem listed above. Before I saw your response I thought I might have some dirt or something under the screen causing it to not work so I took it apart but I guess I was just a little too rough this time and cracked the LCD
I'll have to find a new LCD if I plan to resurrect this phone.
Thanks anyways for the help
stuck in 4 color screen
cyberjak said:
hard reset then hold the 2 buttons next to the volume slider only and press the reset button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
Click to expand...
Click to collapse
I´ve tried everything with my XDA III PH20B1 - no camera model -, but I never get the 3 options screen. Just the 4 colors and bottom right the radio version R 1.10.00.
Is there any other way how to make my O2 XDA III boot after the WM6.1 upgrade ( from 2003se) ?
I have the same problem (I have already reply in another thread...), I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
no need to upgrade or delete anything from bios,this is not a cause of motherboard and software.I removed the motherboard and essembled in a working screen phone.there is no problem all ok,its not a problem with backup battery too.Then i changed working phone motherboard to cant align phone but same as before it dsnt align.Therefore in my investigation its a problem with the touch or screen.
its not a problem with screen cover too.
If any knows the exact solution for align problem screen ,please post it.
eway - press the power/stand by and leave for 15-30secs
then pen reset, press [cam] + [rec] as the 4 colour screen comes on and change 2/3 - as previously stated countless times - press [mail] to reset - this will reboot your new rom.
touch flo user manual is a little allusive
but, soo much too test, soo little time
#===#===#[]#===#===# . . . . . . . . . . . . . _-=d.b=-_
riya2008r2k - can you plz show some pictures of the internals of a BA ?
I for 1 would be very interested, too see. . .
post a link, please!!
How to bypass Align Screen?
If you have flashed a proper rom/ hard reset your device, there could be some dust on display which won't let the align screen pass. This is a real annoying feature on WM platform. But guess there are always ways to bypass software related issues.
The display can be cleaned by patting a small amount of water on it, and then running the water along with a visiting card on the edges of the screen. This will take off all the dust on the sides, and will let you pass the align screen easily. You can simply wipe the display propely with a glass cleaner.
If this doesn't help then :
When your phone says align screen, connect the phone with computer and get it detected in Active Sync. Next, you could be able to access Tree/Files on your phone. If you are able to do so, then go to startup and delete files directing to Align Screen, if I remb it was "welcome" something. Delete the file, and there won't be any align screen.
or
You can always go for an easier method. Download Code Factory's Remore Screen Alignment (http://www.codefactory.es/en/downloads.asp?id=108). And simply enjoy.
In both of the case, active connection with Active Sync is important. If you are unable to connect your phone, then I believe there ain't any way other than changing the display.
Hope it helps.
wbr
Sonny
O2 Flame
Hello everybody,
I've got a serious problem with my 2 years old O2 Flame: sometimes, when I reboot my pda, I can't realign the screen. And when I can do it, after a while, the left of the screen doesn't respond, or, when I click on it, it's another part of the screen that answers! I flashed the bios already: nothing changed.
@Gerd
Did you try Remote Screen Alignment?
Sonny
wow, that tool is awesome. My digitizer is cracked.
Disillusioned said:
@Gerd
Did you try Remote Screen Alignment?
Sonny
Click to expand...
Click to collapse
How do you do that please ?
Zincubus said:
How do you do that please ?
Click to expand...
Click to collapse
Try steps from this post : http://forum.xda-developers.com/showpost.php?p=1769443&postcount=1
This is for HTC Wizard, but it should work.

Auto Lock

I have upgraded from a Touch Pro and am hugely impressed with it. The only negative I am experiencing is that the power button is a lot easier to press than on the original TP. As such, I want to auto enable the lock automatically when the device is turned on. I have enabled this with HD Tweak, and soft reset, but it's still not working. Anybody got it to work?
Yes, I got the same problem, I used the latest Advance Config, but the setting is not there... any one knows any work around?
bump, can anyone help?
I resorted to using S2U2. Works like a charm!
I'm using Pocket Shield for my locking needs. It can unlock with light sensor, gestures, swipes etc. It's pretty handy when using with light sensor enabled as it unlocks without the need to slide or shake. Other unlock options are handy at night time when light sensor wont work.
Juggeli said:
I'm using Pocket Shield for my locking needs. It can unlock with light sensor, gestures, swipes etc. It's pretty handy when using with light sensor enabled as it unlocks without the need to slide or shake. Other unlock options are handy at night time when light sensor wont work.
Click to expand...
Click to collapse
yeah you but gotta pay for it! S2U2 is FREEEEEEE!!
I'm using smartlock and it works!
another option: can set a password on the phone to lock after 1 min.
Mesquire said:
another option: can set a password on the phone to lock after 1 min.
Click to expand...
Click to collapse
Please tell me, how do I do this?
Start > Settings > All settings
Click the Personal tab, followed by Lock
Set password and length of inactivity
AMoosa said:
I have upgraded from a Touch Pro and am hugely impressed with it. The only negative I am experiencing is that the power button is a lot easier to press than on the original TP. As such, I want to auto enable the lock automatically when the device is turned on. I have enabled this with HD Tweak, and soft reset, but it's still not working. Anybody got it to work?
Click to expand...
Click to collapse
The problem is the power button on the touch Pro2 is very sensitive, (this needs to be fixed) it cuts the phone on too easy. I just insatlled S2U2, it does does work great, just set the activate time to 10 seconds, if the power button is accidently pressed the phone will cut off within 10 seconds, you can also adjust it lower.
I tried the other pwer options in windows mobile 6.1 and they dont work on the touch pro2 with any success., phone kept cutting on, which I would discover after taking the phone out of the case...kept killing the battery.
cdcool said:
The problem is the power button on the touch Pro2 is very sensitive, (this needs to be fixed) it cuts the phone on too easy. I just insatlled S2U2, it does does work great, just set the activate time to 10 seconds, if the power button is accidently pressed the phone will cut off within 10 seconds, you can also adjust it lower.
I tried the other pwer options in windows mobile 6.1 and they dont work on the touch pro2 with any success., phone kept cutting on, which I would discover after taking the phone out of the case...kept killing the battery.
Click to expand...
Click to collapse
I sometimes hit the power button when typing. At first i thought my device was crapping out untill i noticed i was hitting the power button with my left hand index finger.
Mesquire said:
Start > Settings > All settings
Click the Personal tab, followed by Lock
Set password and length of inactivity
Click to expand...
Click to collapse
Thanks, you've helped me out in more ways than one
for all who have a TP2 and are using S2U2, which version are you using? the reason I ask is because I upgraded to v2.02 on my tilt and it went all buggy on me so I uninstalled it. And I'd like to know which version people are using so I can install it when I get the phone.
and also, have you noticed any bugs or undesirable occurrences with S2U2? even if it only happened a couple of times, I'd really like to know.
thanks

TF3D launches at startup but have to tap screen to display home screen.

When I boot up after reset or power off, the homescreen displays top task bar, bottom soft keys, and displays "launching TouchFlo3D..." and then... nothing. The screen stays like this until I tap it, and then it displays the home screen. Anybody else seeing this?
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
I have never got no one to answer a question on here good luck...
PaulusUK said:
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
Click to expand...
Click to collapse
Does touching the screen make it start?
I know that not turning off TF3D before installing some cabs can make it behave oddly- TF3D restarts, fails to launch at boot, etc...
Mine does the same thing except its just a plain screen until I touch it then it says launching tflo
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
acrh2 said:
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
Click to expand...
Click to collapse
It has something to do with the PIN lock code, you're right.. now we just need someone to look into this further who knows how to troubleshoot these issues from the back-end.
Bump for more answers!
-mak
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile

Categories

Resources