Related
I just bricked my phone :crying: :crying:
I wanna get back to the official rom, after trying android P (without make it work).
(the rom is from http://en.miui.com/download-354.html)
But I run the wrong script and take the flash_all_lock.img
And my device is stuck on android 8.1 bootloop (It boot, but i get an animated line loop ...)
Any ideas or tricks before i get it back to warranty ?
Thanks
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
BubuXP said:
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
Click to expand...
Click to collapse
But since I flashed the official rom with data whipe, I'm unable to go to dev option and enter OEM Unlocking .... And Fastboot respond me that my device is locked
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
droopeur said:
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
Click to expand...
Click to collapse
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
BubuXP said:
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
Click to expand...
Click to collapse
In fact, both work, but my phone still stucked at the bootloader (infinite line animation in both cases).
BubuXP said:
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
Click to expand...
Click to collapse
Yes I can enter recovery and I have already tried this, but I always end up with the error:
Code:
E: Unknow volume for path [/sideload/package.zip]
Verifying update package...
Update package verification took 17.3 s (result 0)
Installing update...
E:Error il /sideload/package.zip (Status 1)
Installation aborted
BubuXP said:
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
Click to expand...
Click to collapse
Yes of course !
But I revert to stock rom with Mi Flash and I click on Flash all and lock, since the telephone should have been "brand new" it should not have any problems but ...
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
LUNARIO said:
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
Click to expand...
Click to collapse
But since I can't activate OEM I can't unlock bootloader....
try this http://www.xiaomitool.com/ not sure if it works on our phone but maybe can unlock the bootloader so you can use miflash
Have you sideloaded the zip? I think it's better to copy the OTA zip to microSD than ADB sideload.
droopeur said:
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
Click to expand...
Click to collapse
There should be only two methods for entering EDL:
1- request authorization in en.miui.com forum. Sometimes the admins accept requests to give an account one EDL flash permission (but I don't know if it works with AndroidOne devices).
2- finding the test point in the phone's motherboard.
Hi guys,
i tried to install this twrp but it doesnt work...
so i searched on internet and i found another article, i tried to check the current partition and install in another way
for first:
fastboot getvar current-slot
after i do this
fastboot boot_b recovery.img
and then
fastboot set_active b
so nothing to do....but right now my MI A2 lite not boot.
i try again to check my partition but this time i have no replay.
i have unlocked bootloader but i cant go to recovery and i cant boot!!
someone can help me please?
I HAVE THE SAME PROBLEM
everything you said is completely simillar to mine. Can someone help us? Or did you already fix it? Please help me i need my phone working.
I have same problem fastboot flash but after that, it started to reboot automatically. The phone was automatically turning off and on. I again did a "clean all and lock" via miflash tool but still now, no result!
I can boot into recovery without having any problem. But when I boo to setup country date....etc, it starts its auto rebooting process,
Any help ?
droopeur said:
But since I can't activate OEM I can't unlock bootloader....
Click to expand...
Click to collapse
Same situation here. I am desperate!! Did you solve it?
Isso resolve
steledama said:
Same situation here. I am desperate!! Did you solve it?
Click to expand...
Click to collapse
gadgetsfarm.com/download-mi-a2-lite-fastboot-rom-v9-6-4-download/[/url]
How to unbrick?
Hey guys. I bricked my Mi2 Lite as well. Is there any step by step way to unbrick?
had the same problem, was stuck in the bootloop even after I flashed img with MiFlash! NOTE: MY BOOTLOADER WAS UNLOCKED!!! (LUCKLY I DID NOT TRIED FLASH ALL AND UNLOCK!)
headed to this thread
Code:
fastboot flashing unlock
fastboot flashing unlock_critical
did not work, I get error saying FAILED
but after i used
Code:
fastboot oem edl
I went to MiFlash and used "Clean all" option (again note DON'T use "Clean all and lock"!!!). It took around 5 minutes to flash and my notif. light blinked whole the time. After it say "Success" I was able to normaly boot the phone again
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Hi, where i can find MI A2 Lite Tool Kit? i open my device and i can put in EDL mode., my computer detect my pone in EDL mode, but i can not know do.
I like bypass FRP, can anybody help me
Thanks.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Hi all,
I also had same problem and I just resolve it.
My phone was in bootloop mode after stock rom flashing...
You don't need apply "fastboot oem edl" !
Just be sure your device is unlocked.
Download first stock rom (V9.6.4.0.ODLMIFF Firmware for Mi A2 Lite). If you flash last ROM, it don't work.
Flash it with XiaoMiFlash tool (don't forget to enable "Clean All") in bottom of the tool.
After reboot, you can apply OTA updates.
Enjoy !
Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of what to do?
Tks!
riickseven said:
Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of what to do?
Tks!
Click to expand...
Click to collapse
Download Your Latest ota zip from
https://mirrors.lolinet.com/firmware/moto/channel/official/
then flash via rsd lite that will fix your phone and reset it
Help download
motorola/aljeter/aljeter:9/PPPS29.55-35-12-3/a0b9b:user/release-keys
I am trying to unlock the bootloader using ADB and Fastboot, but when I use the command "adb reboot bootloader" the PC suddenly starts recognizing the phone(now in download mode) as a modem, and thus I am not able to update the drivers for Fastboot.
Samsung phones DOES NOT have fastboot, they have a single download mode that can be managed by either Odin or Heimdall.
To unlock the bootloader, simply do it through developer options, set clear that you'll lose all your data in the process.
The problem is that my bootloader can't be unlocked by enabling that one option "Allow OEM unlock", it simply does basically nothing but make some apps stop working. Fastboot doesn't work for reason I mentioned earlier. Is there something I'm missing?
Mohamedkam000 said:
Samsung phones DOES NOT have fastboot, they have a single download mode that can be managed by either Odin or Heimdall.
To unlock the bootloader, simply do it through developer options, set clear that you'll lose all your data in the process.
Click to expand...
Click to collapse
I tried Odin to flash TWRP but it doesn't work. The process fails everytime, for reasons I don't know. I had allowed the phone to be OEM unlocked and I had USB debugging turned on.
WitheRosE said:
I tried Odin to flash TWRP but it doesn't work. The process fails everytime, for reasons I don't know. I had allowed the phone to be OEM unlocked and I had USB debugging turned on.
Click to expand...
Click to collapse
Can you send the Odin log?
Did you install Samsung USB Drivers on your PC? and what recovery version are you trying to flash?
Hi dear community,
I have a new Moto G30 which is now does not boot and keeps getting stuck at bootscreen where the logo is, even after trying to boot for hours. This happened after a reboot where nothing special happened before. I have not installed any custom ROM, and have no idea why this is happening. There is no SD card in it, battery can not be taken out. I tried booting from stock recovery in all possible ways, nothing worked. Tried leaving it shut off for half a day.
Support say the only option is factory reset. However I need to get the data to my laptop before resetting. Is there a way to use Rescue and Smart Assistant for this? I can not boot the phone and can only boot in recovery. Or could I install TWRP or something via ADB sideload would allow me to then use ADB pull or something to get the photos, but TWRP is not yet available for G30?
Thank you!
cricket62 said:
Hi dear community,
I have a new Moto G30 which is now does not boot and keeps getting stuck at bootscreen where the logo is, even after trying to boot for hours. This happened after a reboot where nothing special happened before. I have not installed any custom ROM, and have no idea why this is happening. There is no SD card in it, battery can not be taken out. I tried booting from stock recovery in all possible ways, nothing worked. Tried leaving it shut off for half a day.
Support say the only option is factory reset. However I need to get the data to my laptop before resetting. Is there a way to use Rescue and Smart Assistant for this? I can not boot the phone and can only boot in recovery. Or could I install TWRP or something via ADB sideload would allow me to then use ADB pull or something to get the photos, but TWRP is not yet available for G30?
Thank you!
Click to expand...
Click to collapse
Did you enable adb debugging, in dev options before bootloop?
Did you enable adb debugging, in dev options before bootloop?
Click to expand...
Click to collapse
Hi unfortunately not, I only enabled "developer mode" but didnt think to enable ADB debugging as I was just getting to know the new phone and stock Android 11.
cricket62 said:
Hi unfortunately not, I only enabled developer mode but didnt think to enable ADB debugging as I was just getting to know the new phone and stock Android 11.
Click to expand...
Click to collapse
Is the Bootloader unlocked?
Use LMSA Rescue to download firmware.
You will see a screen that has the device's current firmware, and the firmware LMSA will download.
Make sure they are the same, you can post a screenshot of that if you are not sure.
Then use fastboot.exe to flash this
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot oem fb_mode_clear
then reboot the device.
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
Is the Bootloader unlocked?
Click to expand...
Click to collapse
No, reason is since Lineage OS or TWRP are not yet build for G30 I wanted to keep the fully functional stock.
sd_shadow said:
Use LMSA Rescue to download firmware.
You will see a screen that has the device's current firmware, and the firmware LMSA will download.
Make sure they are the same, you can post a screenshot of that if you are not sure.
Then use fastboot.exe to flash this
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot oem fb_mode_clear
then reboot the device.
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks so much!! I will try that and write results when I get to it! Have a good healthy day!
Hi Just wanted to update: I still need to set up the USB redirect of the fastboot device to the Windows virtual machine. So may take a bit longer for me to get to it.
Ive had my LG G7 for about a year now. I managed to unlock the bootloader without any problems and used magisk ok.
I just came to upgrade the firmware without any problems. I enabled dev and usb debug but the 'Enable oem unlock' button is greyed out and displays "bootloader already unlocked" ok so not a problem - that is until I come to access the bootloader again.
Here is the message:
Welcome to Fastboot mode: Please check "Enable OEM unlock" in developer options
adb commands no longer work at this point as connection is lost. Only choice is manually reboot or switch off.
WTF now what. Im unable to root or restore the bootloader. So even though its unlocked and displays the bootloader unlocked message when booting - Fastboot does not see it and it still wants me to 'Enable oem unlock' but its greyed out.
Any suggestions please anyone
You can use QFIL to restore laf_a & laf_b. Then flash full rom (Refurbish) in Download mode.
ps: the reason is you do not flash full rom after unlock bootloader in order to tell to the machine that you are in the illegal mode kakaka.
Thanks for your reply nttuan. I just about gave up hope. Im totally paranoid without root. No decent firewall, cant freeze garbage etc.
Being relatively unsure, would you mind going over the QFIL method with me.
Thanks
chadandchew said:
Thanks for your reply nttuan. I just about gave up hope. Im totally paranoid without root. No decent firewall
Click to expand...
Click to collapse
Never used QFIL before. Where do I get the firehose elf file from. I noticed a couple of elf files in the extracted folder, is it one of these.
Do I have to create any xml files and do I have to rename any of the kdz extracted files?
Some posts are a bit old and for other models.
Instead of flash the boot_a from magisk_patched image, you can use command
fastboot boot magisk_patched.img
and use the LGUP to reflash the firmware.
If you look at the photo above I LOSE ALL ADB commands after adb reboot bootloader.
fastboot boot magisk_patched.img or any other command just displays "Waiting For any Device" in CMD window.
This is my problem because the bootloader is already unlocked and oem greyed out - it is asking me to "Enable OEM Unlock"
I am wanting to either root the phone or restore bootloader to locked. Sorry for any confusion
type fastboot devices and show me the result.
maybe you do not have correct fastboot driver
It did say waiting for any device but now its gone from bad to worse. I followed this guide Here and now all I get is fastboot screen, see photo. If I now try fastboot devices then fastboot flash boot_a magisk_patched.img it shows error which does not look good actually , photo 2. Cant get download mode. If I try to get it by holding volume button and inserting usb lead I get this nasty screen, photo 3. I think that some of the partitions may have been overwitten. . Stupid move on my part.
Forgot to mention - EDL is still accessable
Ive managed to sort the above problem
QFIL flashed only the following 6 files :
abl_a and abl_b
laf_a and laf_b
boot_a and boot_b
Phone rebooted perfectly after this.
Thanks for your advice